summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-05-31[PATCH] cpufreq-stats driver documentationVenkatesh Pallipadi
Documentation for cpufreq stats. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[PATCH] cpufreq-stats driver updatesVenkatesh Pallipadi
Changes to the cpufreq stats driver: * Changes the way P-state transition table looks in /sysfs providing more clear output * Changes the time unit in the output from HZ to clock_t Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Typos.Dave Jones
cpfureq developers cant spel. Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] longhaul - adjust transition latency.Dave Jones
From patch by: Ken Staton <ken_staton@agilent.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Longhaul: Magic timer frobbing.Dave Jones
As mandated by the spec, disable timer around transitions. From code by : Ken Staton <ken_staton@agilent.com Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] longhaul - disable PCI mastering around transition.Dave Jones
The spec states that we have to do this, which is *horrid*. Based on code from: Ken Staton <ken_staton@agilent.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand governor default sampling downfactor as 1Dave Jones
[PATCH] [5/5] ondemand governor default sampling downfactor as 1 Make default sampling downfactor 1. This works better with earlier auto downscaling change in ondemand governor. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand governor automatic downscalingDave Jones
[PATCH] [4/5] ondemand governor automatic downscaling Here is a change of policy for the ondemand governor. The modification concerns the frequency downscaling. Instead of decreasing to a lower frequency when the CPU usage is under 20%, this new policy automatically scales to the optimal frequency. The optimal frequency being the lowest frequency which provides enough power to not trigger the upscaling policy. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand,conservative governor idle_tick clean-upDave Jones
[PATCH] [3/5] ondemand,conservative governor idle_tick clean-up Ondemand and conservative governor clean-up, it factorises the idle ticks measurement. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand,conservative governor store the idle ticks for all cpusDave Jones
[PATCH] [2/5] ondemand,conservative governor store the idle ticks for all cpus Ondemand, conservative governor did not store prev_cpu_idle_up into prev_cpu_idle_down for other CPUs than the current CPU. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand,conservative minor bug-fix and cleanupDave Jones
[PATCH] [1/5] ondemand,conservative minor bug-fix and cleanup Attached patch fixes some minor issues with Alexander's patch and related cleanup in both ondemand and conservative governor. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Allow ondemand stepping to be changed by user.Dave Jones
Adds support so that the cpufreq change stepping is no longer fixed at 5% and can be changed dynamically by the user Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Prevents un-necessary cpufreq changes if we are already at min/maxDave Jones
Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Add support to cpufreq_ondemand to ignore 'nice' cpu timeDave Jones
Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Conservative cpufreq governerDave Jones
A new cpufreq module, based on the ondemand one with my additional patches just posted. This one is more suitable for battery environments where its probably more appealing to have the cpu freq gracefully increase and decrease rather than flip between the min and max freq's. N.B. Bruno Ducrot pointed out that the amd64's "do have unacceptable latency between min and max freq transition, due to the step-by-step requirements (200MHz IIRC)"; so AMD64 users would probably benefit from this too. Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] fix up comment in cpufreq.hDave Jones
Fix up comment in cpufreq.h stating transition latency should be passed in microseconds -- it was decided long ago to switch to nanoseconds. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] dual-core powernow-k8Dave Jones
With the release of the dual-core AMD Opterons last week, it's high time that cpufreq supported them. The attached patch applies cleanly to 2.6.12-rc3 and updates powernow-k8 to support the latest Athlon 64 and Opteron processors. Update the driver to version 1.40.0 and provide support for dual-core processors. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] make cpufreq_gov_dbs staticDave Jones
This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Recalibrate cpu_khz [2/2]Dave Jones
Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the cpu_khz at runtime. Signed-off-by: Bruno Ducrot <ducrot@poupinou.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Recalibrate cpu_khz [1/2]Dave Jones
We have to recalibrate cpu_khz in order to use the current FID instead the max FID since some BIOS do not put the processor at maximum frequency at POST. Also, some BIOS will change the processor frequency at our back after cpu_khz was calibrate. Finally, this will fix a long standing bug when we do something like this: # rmmod powernow-k7 # modprobe powernow-k7 Signed-off-by: Bruno Ducrot <ducrot@poupinou.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] AMD Elan SC520 cpufreq driver.Dave Jones
From: Sean Young <sean@mess.org> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] Add warning comment about default governors.Dave Jones
This comes up time and time again. Until its fixed, place this comment in the Kconfig which should stem the flow of resubmissions. Signed-off-by: Rob Weryk <rjweryk@uwo.ca> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] speedstep-smi: it works on at least one P4MDave Jones
The speedstep-smi driver actually works on >=1 notebook with a Pentium 4-M CPU where all other cpufreq drivers fail. Therefore, allow speedstep-smi on P4Ms again, but warn users of likely failure Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] ondemand: trivial clean-upsDave Jones
Trivial ondemand governor clean-ups: - change from sampling_rate_in_HZ() to the official function usecs_to_jiffies(). - use for_each_online_cpu() to instead of using "if (cpu_online(i))" Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) supportDave Jones
The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support centrino-like enhanced speedstep; however, no "table" support is possible. Therefore, put NULL entries into speedstep-centrino.c Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] cpufreq-core: reduce warning messages.Dave Jones
cpufreq core is printing out messages at KERN_WARNING level that the core recovers from without intervention, and that the system administrator can do nothing about. Patch below reduces the severity of these messages to debug. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[CPUFREQ] powernow-k7: don't print khz element of FSB.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2005-05-31[PATCH] UDF filesystem: array '__mon_yday' declared as not staticGoffredo Baroncelli
in fs/udf/udftime.c the global array '__mon_yday' is not static, and it conflicts with the glibc one when the kernel is compiled as user mode. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] pcdp.c build fixPeter Chubb
In file included from drivers/firmware/pcdp.c:18: drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type drivers/firmware/pcdp.c: In function `setup_serial_console': drivers/firmware/pcdp.c:27: error: `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this function) Cc: <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] flush icache in correct contextRoman Zippel
flush_icache_range() is used in two different situation - in binfmt_elf.c & co for user space mappings and module.c for kernel modules. On m68k flush_icache_range() doesn't know which data to flush, as it has separate address spaces and the pointer argument can be valid in either address space. First I considered splitting flush_icache_range(), but this patch is simpler. Setting the correct context gives flush_icache_range() enough information to flush the correct data. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] ppc64: allow timer based profiling on iseriesAnton Blanchard
We used to have an iseries specific profiler that used /proc/profile. Now thats gone we can use the generic timer based stuff. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] h8300 sleep problemNick Piggin
h8300 appears to sleep (halt) when need_resched IS set. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] acpi build fix: x86 setup.cAlexander Nyberg
This is a neverending story linux/acpi.h contains empty declarations for acpi_boot_init() & acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI. So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch() Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] x86_64 CONFIG_ACPI=n build fixAndi Kleen
Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] x86_64: More fixes for compilation without CONFIG_ACPIAndi Kleen
Suggested by Alexander Nyberg Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-05-31[IA64] Use "PER_CPU" form of EXPORT macroTony Luck
I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-31[PATCH] Relax idecd dma alignment checkJens Axboe
Only the address needs alignment of mask bits, length should work with a relaxed alignment check. Signed-off-by: Jens Axboe <axboe@suse.de> [ This is take 2: make the length check be for 16-byte alignment, not just word alignment. That should hopefully keep everybody happy, while still allowing CD writing with DMA ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] ppc64: actually call prom_send_capabilitiesPaul Mackerras
When I sent in the patch adding the code for the kernel to tell the firmware about its capabilities on pSeries machines, I included the function to give the capabilities to firmware but somehow forgot the hunk that adds the call to the new function. This patch adds the call. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-29Merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/tg3-2.6Linus Torvalds
2005-05-29Merge of /home/davem/src/GIT/tg3-2.6/David S. Miller
2005-05-29[NET]: Use %lx for netdev->features sysfs formatting.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[IPV6]: Clear up user copy warning in flowlabel code.David S. Miller
We are intentionally ignoring the copy_to_user() value, make it clear to the compiler too. Noted by Jeff Garzik. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[NET]: Add ethtool support for NETIF_F_HW_CSUM.Jon Mason
Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[IPV4]: Kill MULTIPATHHOLDROUTE flag.Pravin B. Shelar
It cannot work properly, so just ignore it in drr and rr multipath algorithms just like the random multipath algorithm does. Suggested by Herbert Xu. Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.hMichael Ellerman
This patch adds is_multicast_ether_addr() to go along with is_valid_ether_addr() and friends. It then changes is_valid_ether_addr() to use the new macro, and fixes up the comment on that function to move implementation details out of the API doco. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[IPV4]: Primary and secondary addressesHarald Welte
Add an option to make secondary IP addresses get promoted when primary IP addresses are removed from the device. It defaults to off to preserve existing behavior. Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29Automatic merge of 'misc-fixes' branch fromLinus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-05-29[TG3]: Fix bug in tg3_load_firmware_cpuMichael Chan
Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu(). It is possible that the bootcode may be loading code from nvram during this call and stopping the cpu without getting the lock may cause uncompleted nvram data to be left in the nvram data register. Subsequent calls to read/write nvram data will fail. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add interrupt testMichael Chan
This test uses the previously added tg3_test_interrupt() to perform the test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 01:26:36 +0000