summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-23arm64: mm: Add double logical invert to pte accessorsSteve Capper
commit 84fe6826c28f69d8708bd575faed7f75e6b6f57f upstream. Page table entries on ARM64 are 64 bits, and some pte functions such as pte_dirty return a bitwise-and of a flag with the pte value. If the flag to be tested resides in the upper 32 bits of the pte, then we run into the danger of the result being dropped if downcast. For example: gather_stats(page, md, pte_dirty(*pte), 1); where pte_dirty(*pte) is downcast to an int. This patch adds a double logical invert to all the pte_ accessors to ensure predictable downcasting. Signed-off-by: Steve Capper <steve.capper@linaro.org> [steve.capper@linaro.org: rebased patch to leave pte_write alone to allow for merge with 3.13 stable] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23bio-integrity: Fix bio_integrity_verify segment start bugNicholas Bellinger
commit 5837c80e870bc3b12ac6a98cdc9ce7a9522a8fb6 upstream. This patch addresses a bug in bio_integrity_verify() code that has been causing DIF READ verify operations to be silently skipped. The issue is that bio->bi_idx will have been incremented within bio_advance() code in the normal blk_update_request() -> req_bio_endio() completion path, and bio_integrity_verify() is using bio_for_each_segment() which starts the bio segment walk at the current bio->bi_idx. So instead use bio_for_each_segment_all() to always start the bio segment walk from zero, regardless of the current bio->bi_idx value after bio_advance() has been called. (Context change for v3.10.y -> v3.13.y code - nab) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23MIPS: include linux/types.hQais Yousef
commit 87c99203fea897fbdd84b681ad9fced2517dcf98 upstream. The file uses u16 type but doesn't include its definition explicitly I was getting this error when including this header in my driver: arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’ Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6212/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23Fix mountpoint reference leakage in linkatOleg Drokin
commit d22e6338db7f613dd4f6095c190682fcc519e4b7 upstream. Recent changes to retry on ESTALE in linkat (commit 442e31ca5a49e398351b2954b51f578353fdf210) introduced a mountpoint reference leak and a small memory leak in case a filesystem link operation returns ESTALE which is pretty normal for distributed filesystems like lustre, nfs and so on. Free old_path in such a case. [AV: there was another missing path_put() nearby - on the previous goto retry] Signed-off-by: Oleg Drokin: <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23regulator: core: Change dummy supplies error message to a warningShuah Khan
commit acc3d5cec84f82ebea535fa0bd9500ac3df2aee9 upstream. Change "dummy supplies not allowed" error message to warning instead, as this is a just warning message with no change to the behavior. [Added a CC to stable since some other bug fixes cause this to come up more frequently on PCs which is how it was noticed -- broonie] Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ALSA: oxygen: modify adjust_dg_dac_routing functionRoman Volkov
commit 1f91ecc14deea9461aca93273d78871ec4d98fcd upstream. When selecting the audio output destinations (headphones, FP headphones, multichannel output), the channel routing should be changed depending on what destination selected. Also unnecessary I2S channels are digitally muted. This function called when the user selects the destination in the ALSA mixer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23intel_pstate: Add support for Baytrail turbo P statesDirk Brandewie
commit 61d8d2abc15e9232c3914c55502b73e559366583 upstream. A documentation update exposed the existance of the turbo ratio register. Update baytrail support to use the turbo range. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23intel_pstate: Add setting voltage value for baytrail P states.Dirk Brandewie
commit 007bea098b869945a462420a1f9d442ff169f722 upstream. Baytrail requires setting P state and voltage pairs when adjusting the requested P state. Add function for retrieving the valid voltage values and modify *_set_pstate() functions to caluclate the appropriate voltage for the requested P state. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23audit: don't generate loginuid log when audit disabledGao feng
commit c2412d91c68426e22add16550f97ae5cd988a159 upstream. If audit is disabled, we shouldn't generate loginuid audit log. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23Btrfs: fix data corruption when reading/updating compressed extentsFilipe David Borba Manana
commit a2aa75e18a21b21952dc6daa9bac7c9f4426f81f upstream. When using a mix of compressed file extents and prealloc extents, it is possible to fill a page of a file with random, garbage data from some unrelated previous use of the page, instead of a sequence of zeroes. A simple sequence of steps to get into such case, taken from the test case I made for xfstests, is: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar This results in the following file items in the fs tree: item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160 inode generation 6 transid 6 size 542872 block group 0 mode 100600 item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16 inode ref index 2 namelen 6 name: foobar item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 0 nr 0 gen 6 extent data offset 0 nr 24576 ram 266240 extent compression 0 item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53 prealloc data disk byte 12849152 nr 241664 gen 6 prealloc data offset 0 nr 241664 item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 4096 gen 6 extent data offset 0 nr 20480 ram 20480 extent compression 2 item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53 prealloc data disk byte 13090816 nr 405504 gen 6 prealloc data offset 0 nr 258048 The on disk extent at offset 266240 (which corresponds to 1 single disk block), contains 5 compressed chunks of file data. Each of the first 4 compress 4096 bytes of file data, while the last one only compresses 3024 bytes of file data. Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 = 1072 bytes) should always return zeroes (our next extent is a prealloc one). The solution here is the compression code path to zero the remaining (untouched) bytes of the last page it uncompressed data into, as the information about how much space the file data consumes in the last page is not known in the upper layer fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing the remainder of the page but only if it corresponds to the last page of the inode and if the inode's size is not a multiple of the page size. This would cause not only returning random data on reads, but also permanently storing random data when updating parts of the region that should be zeroed. For the example above, it means updating a single byte in the region [285648 ; 286720[ would store that byte correctly but also store random data on disk. A test case for xfstests follows soon. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23Btrfs: fix tree mod loggingFilipe David Borba Manana
commit 5de865eebb8330eee19c37b31fb6f315a09d4273 upstream. While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: # btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) # --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 # +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 # @@ -1,3 +1,8 @@ # QA output created by 004 # *** test backref walking # -*** done # +unexpected output from # + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 # +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: # + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23Btrfs: return immediately if tree log mod is not necessaryFilipe David Borba Manana
commit 783577663507411e36e459390ef056556e93ef29 upstream. In ctree.c:tree_mod_log_set_node_key() we were calling __tree_mod_log_insert_key() even when the modification doesn't need to be logged. This would allocate a tree_mod_elem structure, fill it and pass it to __tree_mod_log_insert(), which would just acquire the tree mod log write lock and then free the tree_mod_elem structure and return (that is, a no-op). Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert() which just returns immediately if the modification doesn't need to be logged (without allocating the structure, fill it, acquire write lock, free structure). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPUSuresh Siddha
commit 731bd6a93a6e9172094a2322bd0ee964bb1f4d63 upstream. For non-eager fpu mode, thread's fpu state is allocated during the first fpu usage (in the context of device not available exception). This (math_state_restore()) can be a blocking call and hence we enable interrupts (which were originally disabled when the exception happened), allocate memory and disable interrupts etc. But the eager-fpu mode, call's the same math_state_restore() from kernel_fpu_end(). The assumption being that tsk_used_math() is always set for the eager-fpu mode and thus avoid the code path of enabling interrupts, allocating fpu state using blocking call and disable interrupts etc. But the below issue was noticed by Maarten Baert, Nate Eldredge and few others: If a user process dumps core on an ecrypt fs while aesni-intel is loaded, we get a BUG() in __find_get_block() complaining that it was called with interrupts disabled; then all further accesses to our ecrypt fs hang and we have to reboot. The aesni-intel code (encrypting the core file that we are writing) needs the FPU and quite properly wraps its code in kernel_fpu_{begin,end}(), the latter of which calls math_state_restore(). So after kernel_fpu_end(), interrupts may be disabled, which nobody seems to expect, and they stay that way until we eventually get to __find_get_block() which barfs. For eager fpu, most the time, tsk_used_math() is true. At few instances during thread exit, signal return handling etc, tsk_used_math() might be false. In kernel_fpu_end(), for eager-fpu, call math_state_restore() only if tsk_used_math() is set. Otherwise, don't bother. Kernel code path which cleared tsk_used_math() knows what needs to be done with the fpu state. Reported-by: Maarten Baert <maarten-baert@hotmail.com> Reported-by: Nate Eldredge <nate@thatsmathematics.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <sbsiddha@gmail.com> Link: http://lkml.kernel.org/r/1391410583.3801.6.camel@europa Cc: George Spelvin <linux@horizon.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23SCSI: storvsc: NULL pointer dereference fixAles Novak
commit b12bb60d6c350b348a4e1460cd68f97ccae9822e upstream. If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak <alnovak@suse.cz> Signed-off-by: Thomas Abraham <tabraham@suse.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23SCSI: qla2xxx: Fix multiqueue MSI-X registration.Chad Dupuis
commit f324777ea88bab2522602671e46fc0851d7d5e35 upstream. This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23SCSI: qla2xxx: Poll during initialization for ISP25xx and ISP83xxGiridhar Malavali
commit b77ed25c9f8402e8b3e49e220edb4ef09ecfbb53 upstream. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23SCSI: isci: correct erroneous for_each_isci_host macroLukasz Dorau
commit c59053a23d586675c25d789a7494adfdc02fba57 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0 Call Trace: [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0 [<ffffffff81661c3f>] mutex_lock+0x1f/0x30 [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas] [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas] [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci] [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci] [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0 [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0 [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0 [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120 [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50 [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80 [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci] [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0 [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23SCSI: isci: fix reset timeout handlingDan Williams
commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by: Lukasz Dorau <lukasz.dorau@intel.com> Reported-by: David Milburn <dmilburn@redhat.com> Reported-by: Xun Ni <xun.ni@intel.com> Tested-by: Xun Ni <xun.ni@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23can: flexcan: flexcan_remove(): add missing netif_napi_del()Marc Kleine-Budde
commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream. This patch adds the missing netif_napi_del() to the flexcan_remove() function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23can: flexcan: factor out transceiver {en,dis}able into seperate functionsMarc Kleine-Budde
commit f003698e23f6f56a791774f14d0ac35d04872490 upstream. This patch moves the transceiver enable and disable into seperate functions, where the NULL pointer check is hidden. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23can: flexcan: fix transition from and to low power mode in chip_{en,dis}ableMarc Kleine-Budde
commit 9b00b300e7bce032c467c36ca47fe2a776887fc2 upstream. In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used. Experiments have shown that the transition from and to low power mode may take several microseconds. This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() failsMarc Kleine-Budde
commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23can: flexcan: fix shutdown: first disable chip, then all interruptsMarc Kleine-Budde
commit 5be93bdda64e85450598c6e97f79fb8f6acf30e0 upstream. When shutting down the CAN interface (ifconfig canX down) during high CAN bus loads, the CAN core might hang and freeze the whole CPU. This patch fixes the shutdown sequence by first disabling the CAN core then disabling all interrupts. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23net: unix socket code abuses csum_partialAnton Blanchard
commit 0a13404dd3bf4ea870e3d96270b5a382edca85c0 upstream. The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23dm cache: fix access beyond end of origin deviceHeinz Mauelshagen
commit e893fba90c09f9b57fb97daae204ea9cc2c52fa5 upstream. In order to avoid wasting cache space a partial block at the end of the origin device is not cached. Unfortunately, the check for such a partial block at the end of the origin device was flawed. Fix accesses beyond the end of the origin device that occured due to attempted promotion of an undetected partial block by: - initializing the per bio data struct to allow cache_end_io to work properly - recognizing access to the partial block at the end of the origin device - avoiding out of bounds access to the discard bitset Otherwise, users can experience errors like the following: attempt to access beyond end of device dm-5: rw=0, want=20971520, limit=20971456 ... device-mapper: cache: promotion failed; couldn't copy block Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23dm cache: fix truncation bug when copying a block to/from >2TB fast deviceHeinz Mauelshagen
commit 8b9d96666529a979acf4825391efcc7c8a3e9f12 upstream. During demotion or promotion to a cache's >2TB fast device we must not truncate the cache block's associated sector to 32bits. The 32bit temporary result of from_cblock() caused a 32bit multiplication when calculating the sector of the fast device in issue_copy_real(). Use an intermediate 64bit type to store the 32bit from_cblock() to allow for proper 64bit multiplication. Here is an example of how this bug manifests on an ext4 filesystem: EXT4-fs error (device dm-0): ext4_mb_generate_buddy:756: group 17136, 32768 clusters in bitmap, 30688 in gd; block bitmap corrupt. JBD2: Spotted dirty metadata buffer (dev = dm-0, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23dm space map metadata: fix refcount decrement below 0 which caused corruptionJoe Thornber
commit cebc2de44d3bce53e46476e774126c298ca2c8a9 upstream. This has been a relatively long-standing issue that wasn't nailed down until Teng-Feng Yang's meticulous bug report to dm-devel on 3/7/2014, see: http://www.redhat.com/archives/dm-devel/2014-March/msg00021.html From that report: "When decreasing the reference count of a metadata block with its reference count equals 3, we will call dm_btree_remove() to remove this enrty from the B+tree which keeps the reference count info in metadata device. The B+tree will try to rebalance the entry of the child nodes in each node it traversed, and the rebalance process contains the following steps. (1) Finding the corresponding children in current node (shadow_current(s)) (2) Shadow the children block (issue BOP_INC) (3) redistribute keys among children, and free children if necessary (issue BOP_DEC) Since the update of a metadata block's reference count could be recursive, we will stash these reference count update operations in smm->uncommitted and then process them in a FILO fashion. The problem is that step(3) could free the children which is created in step(2), so the BOP_DEC issued in step(3) will be carried out before the BOP_INC issued in step(2) since these BOPs will be processed in FILO fashion. Once the BOP_DEC from step(3) tries to decrease the reference count of newly shadow block, it will report failure for its reference equals 0 before decreasing. It looks like we can solve this issue by processing these BOPs in a FIFO fashion instead of FILO." Commit 5b564d80 ("dm space map: disallow decrementing a reference count below zero") changed the code to report an error for this temporary refcount decrement below zero. So what was previously a harmless invalid refcount became a hard failure due to the new error path: device-mapper: space map common: unable to decrement a reference count below 0 device-mapper: thin: 253:6: dm_thin_insert_block() failed: error = -22 device-mapper: thin: 253:6: switching pool to read-only mode This bug is in dm persistent-data code that is common to the DM thin and cache targets. So any users of those targets should apply this fix. Fix this by applying recursive space map operations in FIFO order rather than FILO. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=68801 Reported-by: Apollon Oikonomopoulos <apoikos@debian.org> Reported-by: edwillam1007@gmail.com Reported-by: Teng-Feng Yang <shinrairis@gmail.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23dm cache mq: fix memory allocation failure for large cache devicesHeinz Mauelshagen
commit 14f398ca2f26a2ed6236aec54395e0fa06ec8a82 upstream. The memory allocated for the multiqueue policy's hash table doesn't need to be physically contiguous. Use vzalloc() instead of kzalloc(). Fedora has been carrying this fix since 10/10/2013. Failure seen during creation of a 10TB cached device with a 2048 sector block size and 411GB cache size: dmsetup: page allocation failure: order:9, mode:0x10c0d0 CPU: 11 PID: 29235 Comm: dmsetup Not tainted 3.10.4 #3 Hardware name: Supermicro X8DTL/X8DTL, BIOS 2.1a 12/30/2011 000000000010c0d0 ffff880090941898 ffffffff81387ab4 ffff880090941928 ffffffff810bb26f 0000000000000009 000000000010c0d0 ffff880090941928 ffffffff81385dbc ffffffff815f3840 ffffffff00000000 000002000010c0d0 Call Trace: [<ffffffff81387ab4>] dump_stack+0x19/0x1b [<ffffffff810bb26f>] warn_alloc_failed+0x110/0x124 [<ffffffff81385dbc>] ? __alloc_pages_direct_compact+0x17c/0x18e [<ffffffff810bda2e>] __alloc_pages_nodemask+0x6c7/0x75e [<ffffffff810bdad7>] __get_free_pages+0x12/0x3f [<ffffffff810ea148>] kmalloc_order_trace+0x29/0x88 [<ffffffff810ec1fd>] __kmalloc+0x36/0x11b [<ffffffffa031eeed>] ? mq_create+0x1dc/0x2cf [dm_cache_mq] [<ffffffffa031efc0>] mq_create+0x2af/0x2cf [dm_cache_mq] [<ffffffffa0314605>] dm_cache_policy_create+0xa7/0xd2 [dm_cache] [<ffffffffa0312530>] ? cache_ctr+0x245/0xa13 [dm_cache] [<ffffffffa031263e>] cache_ctr+0x353/0xa13 [dm_cache] [<ffffffffa012b916>] dm_table_add_target+0x227/0x2ce [dm_mod] [<ffffffffa012e8e4>] table_load+0x286/0x2ac [dm_mod] [<ffffffffa012e65e>] ? dev_wait+0x8a/0x8a [dm_mod] [<ffffffffa012e324>] ctl_ioctl+0x39a/0x3c2 [dm_mod] [<ffffffffa012e35a>] dm_ctl_ioctl+0xe/0x12 [dm_mod] [<ffffffff81101181>] vfs_ioctl+0x21/0x34 [<ffffffff811019d3>] do_vfs_ioctl+0x3b1/0x3f4 [<ffffffff810f4d2e>] ? ____fput+0x9/0xb [<ffffffff81050b6c>] ? task_work_run+0x7e/0x92 [<ffffffff81101a68>] SyS_ioctl+0x52/0x82 [<ffffffff81391d92>] system_call_fastpath+0x16/0x1b Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23mm/compaction: break out of loop on !PageBuddy in isolate_freepages_blockLaura Abbott
commit 2af120bc040c5ebcda156df6be6a66610ab6957f upstream. We received several reports of bad page state when freeing CMA pages previously allocated with alloc_contig_range: BUG: Bad page state in process Binder_A pfn:63202 page:d21130b0 count:0 mapcount:1 mapping: (null) index:0x7dfbf page flags: 0x40080068(uptodate|lru|active|swapbacked) Based on the page state, it looks like the page was still in use. The page flags do not make sense for the use case though. Further debugging showed that despite alloc_contig_range returning success, at least one page in the range still remained in the buddy allocator. There is an issue with isolate_freepages_block. In strict mode (which CMA uses), if any pages in the range cannot be isolated, isolate_freepages_block should return failure 0. The current check keeps track of the total number of isolated pages and compares against the size of the range: if (strict && nr_strict_required > total_isolated) total_isolated = 0; After taking the zone lock, if one of the pages in the range is not in the buddy allocator, we continue through the loop and do not increment total_isolated. If in the last iteration of the loop we isolate more than one page (e.g. last page needed is a higher order page), the check for total_isolated may pass and we fail to detect that a page was skipped. The fix is to bail out if the loop immediately if we are in strict mode. There's no benfit to continuing anyway since we need all pages to be isolated. Additionally, drop the error checking based on nr_strict_required and just check the pfn ranges. This matches with what isolate_freepages_range does. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23vmxnet3: fix building without CONFIG_PCI_MSIArnd Bergmann
commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream. Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23vmxnet3: fix netpoll race conditionNeil Horman
commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabledBjorn Helgaas
commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream. Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ibmveth: Fix endian issues with MAC addressesAnton Blanchard
commit d746ca9561440685edb62614d1bcbbc27ff50e66 upstream. The code to load a MAC address into a u64 for passing to the hypervisor via a register is broken on little endian. Create a helper function called ibmveth_encode_mac_addr which does the right thing in both big and little endian. We were storing the MAC address in a long in struct ibmveth_adapter. It's never used so remove it - we don't need another place in the driver where we create endian issues with MAC addresses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23KVM: SVM: fix cr8 intercept windowRadim Krčmář
commit 596f3142d2b7be307a1652d59e7b93adab918437 upstream. We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ipc: Fix 2 bugs in msgrcv() MSG_COPY implementationMichael Kerrisk
commit 4f87dac386cc43d5525da7a939d4b4e7edbea22c upstream. While testing and documenting the msgrcv() MSG_COPY flag that Stanislav Kinsbursky added in commit 4a674f34ba04 ("ipc: introduce message queue copy feature" => kernel 3.8), I discovered a couple of bugs in the implementation. The two bugs concern MSG_COPY interactions with other msgrcv() flags, namely: (A) MSG_COPY + MSG_EXCEPT (B) MSG_COPY + !IPC_NOWAIT The bugs are distinct (and the fix for the first one is obvious), however my fix for both is a single-line patch, which is why I'm combining them in a single mail, rather than writing two mails+patches. ===== (A) MSG_COPY + MSG_EXCEPT ===== With the addition of the MSG_COPY flag, there are now two msgrcv() flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp' argument in unrelated ways. Specifying both in the same call is a logical error that is currently permitted, with the effect that MSG_COPY has priority and MSG_EXCEPT is ignored. The call should give an error if both flags are specified. The patch below implements that behavior. ===== (B) (B) MSG_COPY + !IPC_NOWAIT ===== The test code that was submitted in commit 3a665531a3b7 ("selftests: IPC message queue copy feature test") shows MSG_COPY being used in conjunction with IPC_NOWAIT. In other words, if there is no message at the position 'msgtyp'. return immediately with the error in ENOMSG. What was not (fully) tested is the behavior if MSG_COPY is specified *without* IPC_NOWAIT, and there is an odd behavior. If the queue contains less than 'msgtyp' messages, then the call blocks until the next message is written to the queue. At that point, the msgrcv() call returns a copy of the newly added message, regardless of whether that message is at the ordinal position 'msgtyp'. This is clearly bogus, and problematic for applications that might want to make use of the MSG_COPY flag. I considered the following possible solutions to this problem: (1) Force the call to block until a message *does* appear at the position 'msgtyp'. (2) If the MSG_COPY flag is specified, the kernel should implicitly add IPC_NOWAIT, so that the call fails with ENOMSG for this case. (3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate an error (probably, EINVAL is the right one). I do not know if any application would really want to have the functionality of solution (1), especially since an application can determine in advance the number of messages in the queue using msgctl() IPC_STAT. Obviously, this solution would be the most work to implement. Solution (2) would have the effect of silently fixing any applications that tried to employ broken behavior. However, it would mean that if we later decided to implement solution (1), then user-space could not easily detect what the kernel supports (but, since I'm somewhat doubtful that solution (1) is needed, I'm not sure that this is much of a problem). Solution (3) would have the effect of informing broken applications that they are doing something broken. The downside is that this would cause a ABI breakage for any applications that are currently employing the broken behavior. However: a) Those applications are almost certainly not getting the results they expect. b) Possibly, those applications don't even exist, because MSG_COPY is currently hidden behind CONFIG_CHECKPOINT_RESTORE. The upside of solution (3) is that if we later decided to implement solution (1), user-space could determine what the kernel supports, via the error return. In my view, solution (3) is mildly preferable to solution (2), and solution (1) could still be done later if anyone really cares. The patch below implements solution (3). PS. For anyone out there still listening, it's the usual story: documenting an API (and the thinking about, and the testing of the API, that documentation entails) is the one of the single best ways of finding bugs in the API, as I've learned from a lot of experience. Best to do that documentation before releasing the API. Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23i2c: Remove usage of orphaned symbol OF_I2CRichard Weinberger
commit 62c19c9d29e65086e5ae76df371ed2e6b23f00cd upstream. The symbol is an orphan, don't depend on it anymore. Signed-off-by: Richard Weinberger <richard@nod.at> [wsa: enhanced commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: 687b81d083c0 (i2c: move OF helpers into the core) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ASoC: si476x: Fix IO setupLars-Peter Clausen
commit 58d4d3c976b33784a1443c446a3d7203bf2153f0 upstream. The si476x is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced commit d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Fixes: d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ASoC: 88pm860: Fix IO setupLars-Peter Clausen
commit 8eeb5c15131d7b5061c10423eda3ae4c68db4eaf upstream. The 88pm860 is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced in commit f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Fixes: f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/si: fix typo in dpm sq ramping setupAlex Deucher
commit 5b43c3cd07981619dbdb1fb935ef705a3e80955f upstream. inverted logic. Noticed-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon: fix minor typos in si_dpm.cAlex Deucher
commit 407b6dfd9afa30cf963fa99bca91870e47965612 upstream. Copy/paste typos from the ni code. Should not have any functional change. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/cik: properly set compute ring status on disableAlex Deucher
commit b2b3d8d952e4f8d6ac2ce80be96b937f29f6e42e upstream. When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/cik: stop the sdma engines in the enable() functionAlex Deucher
commit 07ae78c9798b79bad3d3adf983c94ba23fde54d4 upstream. We always stop the rings when disabling the engines so just call the stop functions directly from the sdma enable function. This way the rings' status is set correctly on suspend so there are no problems on resume. Fixes resume failures that result in acceleration getting disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/cik: properly set sdma ring status on disableAlex Deucher
commit 7b1bbe883b3ed962ca2be4daf321f318f5091340 upstream. When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon: fix runpm disabling on non-PX harderAlex Deucher
commit 7848865914c6a63ead674f0f5604b77df7d3874f upstream. Make sure runtime pm is disabled on non-PX hardware. Should fix powerdown problems without displays attached. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon: re-order firmware loading in preparation for dpm reworkAlex Deucher
commit 01ac8794a77192236a4b91c33adf4177ac5a21f0 upstream. We need to reorder the driver init sequence to better accomodate dpm which needs to be loaded earlier in the init sequence. Move fw init up so that it's available for dpm init. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/i915: Reject >165MHz modes w/ DVI monitorsVille Syrjälä
commit 6375b768a9850b6154478993e5fb566fa4614a9c upstream. Single-link DVI max dotclock is 165MHz. Filter out modes with higher dotclock when the monitor doesn't support HDMI. Modes higher than 165 MHz were allowed in commit 7d148ef51a657fd04036c3ed7803da600dd0d451 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jul 22 18:02:39 2013 +0200 drm/i915: fix hdmi portclock limits Also don't attempt to use 12bpc mode with DVI monitors. Cc: Adam Nielsen <a.nielsen@shikadi.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75345 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70331 Tested-by: Ralf Jung <post+kernel@ralfj.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/i915: fix pch pci device enumerationImre Deak
commit bcdb72ac7c00d2b56359fc82bcc8fe50454717d5 upstream. pci_get_class(class, from) drops the refcount for 'from', so the extra pci_dev_put we do on it will result in a use after free bug starting with the WARN below. Regression introduced in commit 6a9c4b35e6696a63805b6da5e4889c6986e9ee1b Author: Rui Guo <firemeteor@users.sourceforge.net> Date: Wed Jun 19 21:10:23 2013 +0800 drm/i915: Fix PCH detect with multiple ISA bridges in VM [ 164.338460] WARNING: CPU: 1 PID: 2094 at include/linux/kref.h:47 klist_next+0xae/0x110() [ 164.347731] CPU: 1 PID: 2094 Comm: modprobe Tainted: G O 3.13.0-imre+ #354 [ 164.356468] Hardware name: Intel Corp. VALLEYVIEW B0 PLATFORM/NOTEBOOK, BIOS BYTICRB1.X64.0062.R70.1310112051 10/11/2013 [ 164.368796] Call Trace: [ 164.371609] [<ffffffff816a32a6>] dump_stack+0x4e/0x7a [ 164.377447] [<ffffffff8104f75d>] warn_slowpath_common+0x7d/0xa0 [ 164.384238] [<ffffffff8104f83a>] warn_slowpath_null+0x1a/0x20 [ 164.390851] [<ffffffff8169aeae>] klist_next+0xae/0x110 [ 164.396777] [<ffffffff8130a110>] ? pci_do_find_bus+0x70/0x70 [ 164.403286] [<ffffffff813cb4a9>] bus_find_device+0x89/0xc0 [ 164.409719] [<ffffffff8130a373>] pci_get_dev_by_id+0x63/0xa0 [ 164.416238] [<ffffffff8130a4e4>] pci_get_class+0x44/0x50 [ 164.422433] [<ffffffffa034821f>] intel_dsm_detect+0x16f/0x1f0 [i915] [ 164.429801] [<ffffffffa03482ae>] intel_register_dsm_handler+0xe/0x10 [i915] [ 164.437831] [<ffffffffa02d30fe>] i915_driver_load+0xafe/0xf30 [i915] [ 164.445126] [<ffffffff8158a150>] ? intel_alloc_coherent+0x110/0x110 [ 164.452340] [<ffffffffa0148c07>] drm_dev_register+0xc7/0x150 [drm] [ 164.459462] [<ffffffffa014b23f>] drm_get_pci_dev+0x11f/0x1f0 [drm] [ 164.466554] [<ffffffff816abb81>] ? _raw_spin_unlock_irqrestore+0x51/0x70 [ 164.474287] [<ffffffffa02cf7a6>] i915_pci_probe+0x56/0x60 [i915] [ 164.481185] [<ffffffff8130a028>] pci_device_probe+0x78/0xf0 [ 164.487603] [<ffffffff813cd495>] driver_probe_device+0x155/0x350 [ 164.494505] [<ffffffff813cd74e>] __driver_attach+0x6e/0xa0 [ 164.500826] [<ffffffff813cd6e0>] ? __device_attach+0x50/0x50 [ 164.507333] [<ffffffff813cb2be>] bus_for_each_dev+0x6e/0xc0 [ 164.513752] [<ffffffff813ccefe>] driver_attach+0x1e/0x20 [ 164.519870] [<ffffffff813cc958>] bus_add_driver+0x138/0x260 [ 164.526289] [<ffffffffa0188000>] ? 0xffffffffa0187fff [ 164.532116] [<ffffffff813cde78>] driver_register+0x98/0xe0 [ 164.538558] [<ffffffffa0188000>] ? 0xffffffffa0187fff [ 164.544389] [<ffffffff813087b0>] __pci_register_driver+0x60/0x70 [ 164.551336] [<ffffffffa014b37d>] drm_pci_init+0x6d/0x120 [drm] [ 164.558040] [<ffffffffa0188000>] ? 0xffffffffa0187fff [ 164.563928] [<ffffffffa018806a>] i915_init+0x6a/0x6c [i915] [ 164.570363] [<ffffffff810002da>] do_one_initcall+0xaa/0x160 [ 164.576783] [<ffffffff8103b140>] ? set_memory_nx+0x40/0x50 [ 164.583100] [<ffffffff810ce7f5>] load_module+0x1fb5/0x2550 [ 164.589410] [<ffffffff810caab0>] ? store_uevent+0x40/0x40 [ 164.595628] [<ffffffff810cee7d>] SyS_init_module+0xed/0x100 [ 164.602048] [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b v2: simplify the loop further (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65652 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74161 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegistersAlex Deucher
commit 13714323f83ffa5a772fe0d8b74e0fa32ee08819 upstream. Should be at 0x8 rather than 0. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60523 Noticed by ArtForz on #radeon Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23drm/radeon/atom: select the proper number of lanes in transmitter setupAlex Deucher
commit d03874c881a049a50e12f285077ab1f9fc2686e1 upstream. We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23fs/proc/base.c: fix GPF in /proc/$PID/map_filesArtem Fetishev
commit 70335abb2689c8cd5df91bf2d95a65649addf50b upstream. The expected logic of proc_map_files_get_link() is either to return 0 and initialize 'path' or return an error and leave 'path' uninitialized. By the time dname_to_vma_addr() returns 0 the corresponding vma may have already be gone. In this case the path is not initialized but the return value is still 0. This results in 'general protection fault' inside d_path(). Steps to reproduce: CONFIG_CHECKPOINT_RESTORE=y fd = open(...); while (1) { mmap(fd, ...); munmap(fd, ...); } ls -la /proc/$PID/map_files Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991 Signed-off-by: Artem Fetishev <artem_fetishev@epam.com> Signed-off-by: Aleksandr Terekhov <aleksandr_terekhov@epam.com> Reported-by: <wiebittewas@gmail.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 02:13:45 +0000