summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-22scsi: ata: libata: Add ATA feature control sub-page translationDamien Le Moal
Add support for the ATA feature control sub-page of the control mode page to enable/disable the command duration limits feature using the cdl_ctrl field of the ATA feature control sub-page. Both mode sense and mode select translation are supported. For mode sense, the ata device flag ATA_DFLAG_CDL_ENABLED is used to cache the status of the command duration limits feature. Enabling this feature is done using a SET FEATURES command with a cdl action set to 1 when the page cdl_ctrl field value is 0x2 (T2A and T2B pages supported). If this field is 0, CDL is disabled using the SET FEATURES command with a cdl action set to 0. Since a device CDL and NCQ priority features should not be used simultaneously, ata_mselect_control_ata_feature() returns an error when attempting to enable CDL with the device priority feature enabled. Conversely, the function ata_ncq_prio_enable_store() used to enable the use of the device NCQ priority feature through sysfs is modified to return an error if the device CDL feature is enabled. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-18-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata-scsi: Add support for CDL pages mode senseDamien Le Moal
Modify ata_scsiop_mode_sense() and ata_msense_control() to support mode sense access to the T2A and T2B sub-pages of the control mode page. ata_msense_control() is modified to support sub-pages. The T2A sub-page is generated using the read descriptors of the command duration limits log page 18h. The T2B sub-page is generated using the write descriptors of the same log page. With the addition of these sub-pages, getting all sub-pages of the control mode page is also supported by increasing the value of ATA_SCSI_RBUF_SIZE from 576B up to 2048B to ensure that all sub-pages fit in the fill buffer. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-17-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata-scsi: Handle CDL bits in ata_scsiop_maint_in()Damien Le Moal
For a scsi MAINTENANCE_IN/MI_REPORT_SUPPORTED_OPERATION_CODES operation, add the translation of the rwcdlp and cdlp bits for the READ 16 and WRITE 16 commands. If the ATA device does not support command duration limits, these bits are always 0. If the ATA device supports command duration limits, the rwcdlp bit is set to 1 for READ 16 and WRITE 16 and the cdlp bits are set to 0x1 for READ 16 and 0x2 for WRITE 16. These correspond to the T2A mode page containing the read descriptors and to the T2B mode page containing the write descriptors, as defined in SAT-5. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-16-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata: Detect support for command duration limitsDamien Le Moal
Use the supported capabilities identify device data log page to detect if a device supports the command duration limits feature. For devices supporting this feature, set the device flag ATA_DFLAG_CDL. To support SCSI-ATA translation, retrieve the command duration limits log page 18h and cache this page content using the cdl array added to the ata_device data structure. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-15-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITIONNiklas Cassel
Currently, ata_eh_request_sense() unconditionally sets the scsicmd->result to SAM_STAT_CHECK_CONDITION. For Command Duration Limits policy 0xD: The device shall complete the command without error (SAM_STAT_GOOD) with the additional sense code set to DATA CURRENTLY UNAVAILABLE. It is perfectly fine to have sense data for a command that returned completion without error. In order to support for CDL policy 0xD, we have to remove this assumption that having sense data means that the command failed (SAM_STAT_CHECK_CONDITION). Change ata_eh_request_sense() to not set SAM_STAT_CHECK_CONDITION, and instead move the setting of SAM_STAT_CHECK_CONDITION to the single caller that wants SAM_STAT_CHECK_CONDITION set, that way ata_eh_request_sense() can be reused in a follow-up patch that adds support for CDL policy 0xD. The only caller of ata_eh_request_sense() is protected by: if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)), so we can remove this duplicated check from ata_eh_request_sense() itself. Additionally, ata_eh_request_sense() is only called from ata_eh_analyze_tf(), which is only called when iteratating the QCs using ata_qc_for_each_raw(), which does not include the internal tag, so cmd can never be NULL (all non-internal commands have qc->scsicmd set), so remove the !cmd check as well. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-14-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata-scsi: Remove unnecessary !cmd checksNiklas Cassel
There is no need to check if !cmd as this can only happen for ATA internal commands which uses the ATA internal tag (32). Most users of ata_scsi_set_sense() are from _xlat functions that translate a scsicmd to an ATA command. These obviously have a qc->scsicmd. ata_scsi_qc_complete() can also call ata_scsi_set_sense() via ata_gen_passthru_sense() / ata_gen_ata_sense(), called via ata_scsi_qc_complete(). This callback is only called for translated commands, so it also has a qc->scsicmd. ata_eh_analyze_ncq_error(): the NCQ error log can only contain a 0-31 value, so it will never be able to get the ATA internal tag (32). ata_eh_request_sense(): only called by ata_eh_analyze_tf(), which is only called when iteratating the QCs using ata_qc_for_each_raw(), which does not include the internal tag. Since there is no existing call site where cmd can be NULL, remove the !cmd check from ata_scsi_set_sense() and ata_scsi_set_sense_information(). Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-13-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: sd: Handle read/write CDL timeout failuresNiklas Cassel
Commands using a duration limit descriptor that has limit policies set to a value other than 0x0 may be failed by the device if one of the limits are exceeded. For such commands, since the failure is the result of the user duration limit configuration and workload, the commands should not be retried and terminated immediately. Furthermore, to allow the user to differentiate these "soft" failures from hard errors due to hardware problem, a different error code than EIO should be returned. There are 2 cases to consider: (1) The failure is due to a limit policy failing the command with a check condition sense key, that is, any limit policy other than 0xD. For this case, scsi_check_sense() is modified to detect failures with the ABORTED COMMAND sense key and the COMMAND TIMEOUT BEFORE PROCESSING or COMMAND TIMEOUT DURING PROCESSING or COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR RECOVERY additional sense code. For these failures, a SUCCESS disposition is returned so that scsi_finish_command() is called to terminate the command. (2) The failure is due to a limit policy set to 0xD, which result in the command being terminated with a GOOD status, COMPLETED sense key, and DATA CURRENTLY UNAVAILABLE additional sense code. To handle this case, the scsi_check_sense() is modified to return a SUCCESS disposition so that scsi_finish_command() is called to terminate the command. In addition, scsi_decide_disposition() has to be modified to see if a command being terminated with GOOD status has sense data. This is as defined in SCSI Primary Commands - 6 (SPC-6), so all according to spec, even if GOOD status commands were not checked before. If scsi_check_sense() detects sense data representing a duration limit, scsi_check_sense() will set the newly introduced SCSI ML byte SCSIML_STAT_DL_TIMEOUT. This SCSI ML byte is checked in scsi_noretry_cmd(), so that a command that failed because of a CDL timeout cannot be retried. The SCSI ML byte is also checked in scsi_result_to_blk_status() to complete the command request with the BLK_STS_DURATION_LIMIT status, which result in the user seeing ETIME errors for the failed commands. Co-developed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-12-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: sd: Set read/write command CDL indexDamien Le Moal
Introduce the command duration limits helper function sd_cdl_dld() to set the DLD bits of READ/WRITE 16 and READ/WRITE 32 commands to indicate to the device the command duration limit descriptor to apply to the commands. When command duration limits are enabled, sd_cdl_dld() obtains the index of the descriptor to apply to the command using the hints field of the request IO priority value (hints IOPRIO_HINT_DEV_DURATION_LIMIT_1 to IOPRIO_HINT_DEV_DURATION_LIMIT_7). If command duration limits is disabled (which is the default), the limit index "0" is always used to indicate "no limit" for a command. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-11-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Allow enabling and disabling command duration limitsDamien Le Moal
Add the sysfs scsi_device attribute cdl_enable to allow a user to enable or disable a device command duration limits feature. CDL is disabled by default. This feature must be explicitly enabled by a user by setting the cdl_enable attribute to 1. The new function scsi_cdl_enable() does not do anything beside setting the cdl_enable field of struct scsi_device in the case of a (real) SCSI device (e.g. a SAS HDD). For ATA devices, the command duration limits feature needs to be enabled/disabled using the ATA feature sub-page of the control mode page. To do so, the scsi_cdl_enable() function checks if this mode page is supported using scsi_mode_sense(). If it is, scsi_mode_select() is used to enable and disable CDL. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-10-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Detect support for command duration limitsDamien Le Moal
Introduce the function scsi_cdl_check() to detect if a device supports command duration limits (CDL). Support for the READ 16, WRITE 16, READ 32 and WRITE 32 commands are checked using the function scsi_report_opcode() to probe the rwcdlp and cdlp bits as they indicate the mode page defining the command duration limits descriptors that apply to the command being tested. If any of these commands support CDL, the field cdl_supported of struct scsi_device is set to 1 to indicate that the device supports CDL. Support for CDL for a device is advertizes through sysfs using the new cdl_supported device attribute. This attribute value is 1 for a device supporting CDL and 0 otherwise. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-9-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Support Service Action in scsi_report_opcode()Damien Le Moal
The REPORT_SUPPORTED_OPERATION_CODES command allows checking for support of commands that have the same opcode but different service actions, such as READ 32 and WRITE 32. However, the current implementation of scsi_report_opcode() only allows checking an operation code without a service action differentiation. Add the "sa" argument to scsi_report_opcode() to allow passing a service action. If a non-zero service action is specified, the reporting options field value is set to 3 to have the service action field taken into account by the device. If no service action field is specified (zero), the reporting options field is set to 1 as before. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-8-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Support retrieving sub-pages of mode pagesDamien Le Moal
Allow scsi_mode_sense() to retrieve sub-pages of mode pages by adding the subpage argument. Change all the current caller sites to specify the subpage 0. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-7-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Rename and move get_scsi_ml_byte()Niklas Cassel
SCSI has two different getters: - get_XXX_byte() (in scsi_cmnd.h) which takes a struct scsi_cmnd *, and - XXX_byte() (in scsi.h) which takes a scmd->result. The proper name for get_scsi_ml_byte() should thus be without the get_ prefix, as it takes a scmd->result. Rename the function to rectify this. (This change was suggested by Mike Christie.) Additionally, move get_scsi_ml_byte() to scsi_priv.h since both scsi_lib.c and scsi_error.c will need to use this helper in a follow-up patch. Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-6-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: core: Allow libata to complete successful commands via EHNiklas Cassel
In SCSI, we get the sense data as part of the completion, for ATA however, we need to fetch the sense data as an extra step. For an aborted ATA command the sense data is fetched via libata's ->eh_strategy_handler(). For Command Duration Limits policy 0xD: The device shall complete the command without error with the additional sense code set to DATA CURRENTLY UNAVAILABLE. In order to handle this policy in libata, we intend to send a successful command via SCSI EH, and let libata's ->eh_strategy_handler() fetch the sense data for the good command. This is similar to how we handle an aborted ATA command, just that we need to read the Successful NCQ Commands log instead of the NCQ Command Error log. When we get a SATA completion with successful commands, ATA_SENSE will be set, indicating that some commands in the completion have sense data. The sense_valid bitmask in the Sense Data for Successful NCQ Commands log will inform exactly which commands that had sense data, which might be a subset of all the commands that was completed in the same completion. (Yet all will have ATA_SENSE set, since the status is per completion.) The successful commands that have e.g. a "DATA CURRENTLY UNAVAILABLE" sense data will have a SCSI ML byte set, so scsi_eh_flush_done_q() will not set the scmd->result to DID_TIME_OUT for these commands. However, the successful commands that did not have sense data, must not get their result marked as DID_TIME_OUT by SCSI EH. Add a new flag SCMD_FORCE_EH_SUCCESS, which tells SCSI EH to not mark a command as DID_TIME_OUT, even if it has scmd->result == SAM_STAT_GOOD. This will be used by libata in a subsequent commit. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-5-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: block: Introduce BLK_STS_DURATION_LIMITDamien Le Moal
Introduce the new block I/O status BLK_STS_DURATION_LIMIT for LLDDs to report command that failed due to a command duration limit being exceeded. This new status is mapped to the ETIME error code to allow users to differentiate "soft" duration limit failures from other more serious hardware related errors. If we compare BLK_STS_DURATION_LIMIT with BLK_STS_TIMEOUT: -BLK_STS_DURATION_LIMIT means that the drive gave a reply indicating that the command duration limit was exceeded before the command could be completed. This I/O status is mapped to ETIME for user space. -BLK_STS_TIMEOUT means that the drive never gave a reply at all. This I/O status is mapped to ETIMEDOUT for user space. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-4-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: block: Introduce ioprio hintsDamien Le Moal
I/O priorities currently only use 6-bits of the 16-bits ioprio value: the 3-upper bits are used to define up to 8 priority classes (4 of which are valid) and the 3 lower bits of the value are used to define a priority level for the real-time and best-effort class. The remaining 10-bits between the I/O priority class and level are unused, and in fact, cannot be used by the user as doing so would either result in the value being completely ignored, or in an error returned by ioprio_check_cap(). Use these 10-bits of an ioprio value to allow a user to specify I/O hints. An I/O hint is defined as a 10-bitsvalue, allowing up to 1023 different hints to be specified, with the value 0 being reserved as the "no hint" case. An I/O hint can apply to any I/O that specifies a valid priority class other than NONE, regardless of the I/O priority level specified. To do so, the macros IOPRIO_PRIO_HINT() and IOPRIO_PRIO_VALUE_HINT() are introduced in include/uapi/linux/ioprio.h to respectively allow a user to get and set a hint in an ioprio value. To support the ATA and SCSI command duration limits feature, 7 hints are defined: IOPRIO_HINT_DEV_DURATION_LIMIT_1 to IOPRIO_HINT_DEV_DURATION_LIMIT_7, allowing a user to specify which command duration limit descriptor should be applied to the commands serving an I/O. Specifying these hints has for now no effect whatsoever if the target block devices do not support the command duration limits feature. However, in the future, block I/O schedulers can be modified to optimize I/O issuing order based on these hints, even for devices that do not support the command duration limits feature. Given that the 7 duration limits hints defined have no effect on any block layer component, the actual definition of the duration limits implied by these hints remains at the device level. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-3-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: block: ioprio: Clean up interface definitionDamien Le Moal
The I/O priority user interface defines the 16-bits ioprio values as the combination of the upper 3-bits for an I/O priority class and the lower 13-bits as priority data. However, the kernel only uses the lower 3-bits of the priority data to define priority levels for the RT and BE priority classes. The data part of an ioprio value is completely ignored for the IDLE and NONE classes. This is enforced by checks done in ioprio_check_cap(), which is called for all paths that allow defining an I/O priority for I/Os: the per-context ioprio_set() system call, aio interface and io_uring interface. Clarify this fact in the uapi ioprio.h header file and introduce the IOPRIO_PRIO_LEVEL_MASK and IOPRIO_PRIO_LEVEL() macros for users to define and get priority levels in an ioprio value. The coarser macro IOPRIO_PRIO_DATA() is retained for backward compatibility with old applications already using it. There is no functional change introduced with this. In-kernel users of the IOPRIO_PRIO_DATA() macro which are explicitly handling I/O priority data as a priority level are modified to use the new IOPRIO_PRIO_LEVEL() macro without any functional change. Since f2fs is the only user of this macro not explicitly using that value as a priority level, it is left unchanged. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-2-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-07Linux 6.4-rc1v6.4-rc1Linus Torvalds
2023-05-07Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
2023-05-07Merge tag 'core-debugobjects-2023-05-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
2023-05-07Merge tag 'v6.4-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-07Merge tag '6.4-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
2023-05-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate"
2023-05-07Merge tag 'mailbox-v6.4' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
2023-05-07Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linuxLinus Torvalds
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
2023-05-06Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"Arnaldo Carvalho de Melo
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06Revert "perf build: Warn for BPF skeletons if endian mismatches"Arnaldo Carvalho de Melo
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06Merge tag 'mm-stable-2023-05-06-10-49' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup"). [ The whole old series: def8574308ed..2d55c16c0c54 results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL
2023-05-06Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants
2023-05-06dmapool: link blocks across pagesKeith Busch
The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: don't memset on free twiceKeith Busch
If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: simplify freeingKeith Busch
The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: consolidate page initializationKeith Busch
Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: rearrange page alloc failure handlingKeith Busch
Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: move debug code to own functionsKeith Busch
Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: speedup DMAPOOL_DEBUG with init_on_allocTony Battersby
Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: cleanup integer typesTony Battersby
To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: use sysfs_emit() instead of scnprintf()Tony Battersby
Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: remove checks for dev == NULLTony Battersby
dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nfs: fix mis-merged __filemap_get_folio() error checkLinus Torvalds
Fix another case of an incorrect check for the returned 'folio' value from __filemap_get_folio(). The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio"). But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page array functions to use a folio") added a new user of that function. And my merge of the two did not fix this up correctly. The ext4 merge had the same issue, but that one had been caught in linux-next and got properly fixed while merging. Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-06afs: fix the afs_dir_get_folio return valueChristoph Hellwig
Keep returning NULL on failure instead of letting an ERR_PTR escape to callers that don't expect it. Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nilfs2: do not write dirty data after degenerating to read-onlyRyusuke Konishi
According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06mm: do not reclaim private data from pinned pageJan Kara
If the page is pinned, there's no point in trying to reclaim it. Furthermore if the page is from the page cache we don't want to reclaim fs-private data from the page because the pinning process may be writing to the page at any time and reclaiming fs private info on a dirty page can upset the filesystem (see link below). Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nilfs2: fix infinite loop in nilfs_mdt_get_block()Ryusuke Konishi
If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06mm/mmap/vma_merge: always check invariantsLorenzo Stoakes
We may still have inconsistent input parameters even if we choose not to merge and the vma_merge() invariant checks are useful for checking this with no production runtime cost (these are only relevant when CONFIG_DEBUG_VM is specified). Therefore, perform these checks regardless of whether we merge. This is relevant, as a recent issue (addressed in commit "mm/mempolicy: Correctly update prev when policy is equal on mbind") in the mbind logic was only picked up in the 6.2.y stable branch where these assertions are performed prior to determining mergeability. Had this remained the same in mainline this issue may have been picked up faster, so moving forward let's always check them. Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06filemap: Handle error return from __filemap_get_folio()Matthew Wilcox
Smatch reports that filemap_fault() was missed in the conversion of __filemap_get_folio() error returns from NULL to ERR_PTR. Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
2023-05-06Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors()
2023-05-06Merge tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linuxLinus Torvalds
Pull nonblocking pipe io_uring support from Jens Axboe: "Here's the revised edition of the FMODE_NOWAIT support for pipes, in which we just flag it as such supporting FMODE_NOWAIT unconditionally, but clear it if we ever end up using splice/vmsplice on the pipe. The pipe read/write side is perfectly fine for nonblocking IO, however splice and vmsplice can potentially wait for IO with the pipe lock held" * tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux: pipe: set FMODE_NOWAIT on pipes splice: clear FMODE_NOWAIT on file if splice/vmsplice is used
2023-05-06Merge tag 'sound-fix-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for rc1. The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of it was merely a code shuffling. Another significant change here is for ALSA PCM core; it received a revert and a series of fixes for PCM auto-silencing where it caused a regression in the previous PR for rc1. Others are all small: ASoC Intel fixes, various quirks for ASoC AMD, HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and some documentation updates" * tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() ALSA: pcm: playback silence - move silence variable updates to separate function ALSA: pcm: playback silence - remove extra code ALSA: pcm: fix playback silence - correct incremental silencing ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init` ALSA: usb-audio: Add quirk for Pioneer DDJ-800 ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x ASoC: codecs: wcd938x: fix accessing regmap on unattached devices ALSA: docs: Fix code block indentation in ALSA driver example ALSA: docs: Extend module parameters description ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41 ALSA: emu10k1: use more existing defines instead of open-coded numbers ASoC: amd: yc: Add ASUS M3402RA into DMI table ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6 ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 19:30:13 +0000