summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-01netlink: kconfig: move mmap i/o into netlink kconfigDaniel Borkmann
Currently, in menuconfig, Netlink's new mmaped IO is the very first entry under the ``Networking support'' item and comes even before ``Networking options'': [ ] Netlink: mmaped IO Networking options ---> ... Lets move this into ``Networking options'' under netlink's Kconfig, since this might be more appropriate. Introduced by commit ccdfcc398 (``netlink: mmaped netlink: ring setup''). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01netpoll: convert mutex into a semaphoreNeil Horman
Bart Van Assche recently reported a warning to me: <IRQ> [<ffffffff8103d79f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8103d7fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff814761dd>] mutex_trylock+0x16d/0x180 [<ffffffff813968c9>] netpoll_poll_dev+0x49/0xc30 [<ffffffff8136a2d2>] ? __alloc_skb+0x82/0x2a0 [<ffffffff81397715>] netpoll_send_skb_on_dev+0x265/0x410 [<ffffffff81397c5a>] netpoll_send_udp+0x28a/0x3a0 [<ffffffffa0541843>] ? write_msg+0x53/0x110 [netconsole] [<ffffffffa05418bf>] write_msg+0xcf/0x110 [netconsole] [<ffffffff8103eba1>] call_console_drivers.constprop.17+0xa1/0x1c0 [<ffffffff8103fb76>] console_unlock+0x2d6/0x450 [<ffffffff8104011e>] vprintk_emit+0x1ee/0x510 [<ffffffff8146f9f6>] printk+0x4d/0x4f [<ffffffffa0004f1d>] scsi_print_command+0x7d/0xe0 [scsi_mod] This resulted from my commit ca99ca14c which introduced a mutex_trylock operation in a path that could execute in interrupt context. When mutex debugging is enabled, the above warns the user when we are in fact exectuting in interrupt context interrupt context. After some discussion, It seems that a semaphore is the proper mechanism to use here. While mutexes are defined to be unusable in interrupt context, no such condition exists for semaphores (save for the fact that the non blocking api calls, like up and down_trylock must be used when in irq context). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Bart Van Assche <bvanassche@acm.org> CC: Bart Van Assche <bvanassche@acm.org> CC: David Miller <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01netlink: Fix skb ref counting.Pravin B Shelar
Commit f9c2288837ba072b21dba955f04a4c97eaa77b1e (netlink: implement memory mapped recvmsg) increamented skb->users ref count twice for a dump op which does not look right. Following patch fixes that. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01net_sched: act_ipt forward compat with xtablesJamal Hadi Salim
Deal with changes in newer xtables while maintaining backward compatibility. Thanks to Jan Engelhardt for suggestions. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30mlx4_en: fix a build error on 32bit archesEric Dumazet
commit b6c39bfcf1d7d63 ("net/mlx4_en: Add a service task") added a build error on 32bit arches. ERROR: "__udivdi3" [drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko] undefined! Fix this problem by using do_div() Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Revert "bnx2x: allow nvram test to run when device is down"Dmitry Kravkov
This reverts commit d2d2d87dfd1a25ee270994c5b9e3eb4690428d32 ("bnx2x: allow nvram test to run when device is down"). Since it makes access to the device in D3 state possible. More work is required to make sure device is not set to D3 during ifdown. Until this is done the nvram-test should simply exit if device is down like it did before. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30bridge: avoid OOPS if root port not foundstephen hemminger
Bridge can crash while trying to send topology change packet. This happens if root port can't be found. This was reported by user but currently unable to reproduce it easily. The STP conditions that cause this are not known yet, but the problem doesn't have to be fatal. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30drivers: net: cpsw: fix kernel warn on cpsw irq enableMugunthan V N
With the commit a11fbba (net/cpsw: fix irq_disable() with threaded interrupts) from Sebastian Siewior, a kernel warning is generated as below. This warning is generated as the irq_enabled is not initialized for the primary interface and in probe it is initialized for the second interface. This patch moves irq_enabled initialization from second interface to primary interface. [ 3.049173] net eth0: phy found : id is : 0x4dd074 [ 3.054552] net eth0: phy found : id is : 0x4dd074 [ 3.070421] ------------[ cut here ]------------ [ 3.075308] WARNING: at kernel/irq/manage.c:437 enable_irq+0x3c/0x74() [ 3.082173] Unbalanced enable for IRQ 56 [ 3.086299] Modules linked in: [ 3.089557] [<c001abcc>] (unwind_backtrace+0x0/0xf0) from [<c004294c>] (warn_slowpath_common+0x4c/0x68) [ 3.099450] [<c004294c>] (warn_slowpath_common+0x4c/0x68) from [<c00429fc>] (warn_slowpath_fmt+0x30/0x40) [ 3.109521] [<c00429fc>] (warn_slowpath_fmt+0x30/0x40) from [<c00a29fc>] (enable_irq+0x3c/0x74) [ 3.118681] [<c00a29fc>] (enable_irq+0x3c/0x74) from [<c03a7818>] (cpsw_ndo_open+0x61c/0x684) [ 3.127669] [<c03a7818>] (cpsw_ndo_open+0x61c/0x684) from [<c0445c08>] (__dev_open+0x9c/0xf8) [ 3.136646] [<c0445c08>] (__dev_open+0x9c/0xf8) from [<c0445e34>] (__dev_change_flags+0x78/0x13c) [ 3.145988] [<c0445e34>] (__dev_change_flags+0x78/0x13c) from [<c0445f64>] (dev_change_flags+0x10/0x48) [ 3.155884] [<c0445f64>] (dev_change_flags+0x10/0x48) from [<c0736d88>] (ip_auto_config+0x198/0x111c) [ 3.165592] [<c0736d88>] (ip_auto_config+0x198/0x111c) from [<c00086a4>] (do_one_initcall+0x34/0x180) [ 3.175309] [<c00086a4>] (do_one_initcall+0x34/0x180) from [<c07078f8>] (kernel_init_freeable+0xfc/0x1c8) [ 3.185393] [<c07078f8>] (kernel_init_freeable+0xfc/0x1c8) from [<c04f36ec>] (kernel_init+0x8/0xe4) [ 3.194929] [<c04f36ec>] (kernel_init+0x8/0xe4) from [<c00133d0>] (ret_from_fork+0x14/0x24) [ 3.203712] ---[ end trace d6f979da080bc391 ]--- Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30sh_eth: use random MAC address if no valid one suppliedSergei Shtylyov
On Renesas R-Car based development boards, although a MAC address is printed on all the Ethernet port labels, U-Boot doesn't write a valid MAC address to the Ether MAHR/MALR registers (there's no storage provided for the Ether MAC address either), so we have to resort to using a random MAC address... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-303c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)Matthew Whitehead
The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one. It does this with the SET_NETDEV_DEV function. It should register with the device hierarchy in two additional cases: standard (non-PnP) ISA and EISA. - Currently they appear here: /sys/devices/virtual/net/eth0 (standard ISA) /sys/devices/virtual/net/eth1 (EISA) - Rather, they should instead be here: /sys/devices/isa/3c509.0/net/eth0 (standard ISA) /sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA) Tested on ISA and EISA boards. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30tg3: fix to append hardware time stamping flagsFlavio Leitner
The commit f233a976ad15c3b8c54c0157f3c41d23f7514279 (tg3: shows HW time stamping support only if ptp_capable is present) didn't append hardware flags correctly. This patch fixes it. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/net/ethernet/emulex/benet/be.h include/net/tcp.h net/mac802154/mac802154.h Most conflicts were minor overlapping stuff. The be2net driver brought in some fixes that added __vlan_put_tag calls, which in net-next take an additional argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30unix/stream: fix peeking with an offset larger than data in queueBenjamin Poirier
Currently, peeking on a unix stream socket with an offset larger than len of the data in the sk receive queue returns immediately with bogus data. This patch fixes this so that the behavior is the same as peeking with no offset on an empty queue: the caller blocks. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30unix/dgram: fix peeking with an offset larger than data in queueBenjamin Poirier
Currently, peeking on a unix datagram socket with an offset larger than len of the data in the sk receive queue returns immediately with bogus data. That's because *off is not reset between each skb_queue_walk(). This patch fixes this so that the behavior is the same as peeking with no offset on an empty queue: the caller blocks. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30unix/dgram: peek beyond 0-sized skbsBenjamin Poirier
"77c1090 net: fix infinite loop in __skb_recv_datagram()" (v3.8) introduced a regression: After that commit, recv can no longer peek beyond a 0-sized skb in the queue. __skb_recv_datagram() instead stops at the first skb with len == 0 and results in the system call failing with -EFAULT via skb_copy_datagram_iovec(). When peeking at an offset with 0-sized skb(s), each one of those is received only once, in sequence. The offset starts moving forward again after receiving datagrams with len > 0. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30openvswitch: Remove unneeded ovs_netdev_get_ifindex()Thomas Graf
The only user is get_dpifindex(), no need to redirect via the port operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30net: Use consume_skb() to free gso segmented skbSridhar Samudrala
Use consume_skb() to free the original skb that is successfully transmitted as gso segmented skbs so that it is not treated as a drop due to an error. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== A few more stragglers intended for 3.10... For the Bluetooth bits, Gustavo says: "A few more patches intended for 3.10, the most important one is the support in btusb for fw loading for the Intel Bluetooth device. Other than that we have only fixes and clean ups." For the iwlwifi bits, Johannes says: "Here are a few more changes for the 3.10 stream, some bugfixes, adjustments to some powersave parameters and a new device ID." For the NFC bits, Samuel says: "This pull request includes Marcel's Kconfig dependency fix on top of the LLCP code move to net/nfc." On top of that...Yogesh Ashok Powar provides a few PCI-related mwifiex updates, Hauke Mehrtens provides a small ssb feature for spurious tone avoidance on a specific chip, and Larry Finger provides a small rtlwifi fix related to avoiding false detection of AP loss. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-29Merge branch 'vxlan_bnx2x_offload'David S. Miller
Dmitry Kravkov says: ==================== The series fixes GSO flags in vxlan xmit code and adds appropriate code for bnx2x driver to utilize fw support for UDP tunneling protocols offload. Netperf's results below show improvement in throughput between two vxlan interfaces: before: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 9.0.0.2 (9.0.0.2) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.20 228.73 after: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 9.0.0.2 (9.0.0.2) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3314.75 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29bnx2x: allow handling tunnel over udp offloadDmitry Kravkov
CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: do not set SKB_GSO_UDPDmitry Kravkov
Since SKB_GSO_* flags are set by appropriate gso_segment callback in TCP/UDP layer. CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4vf: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4: Fix pci_device_id structure initialization with correct PF numberVipul Pandya
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29tcp: reset timer after any SYNACK retransmitYuchung Cheng
Linux immediately returns SYNACK on (spurious) SYN retransmits, but keeps the SYNACK timer running independently. Thus the timer may fire right after the SYNACK retransmit and causes a SYN-SYNACK cross-fire burst. Adopt the fast retransmit/recovery idea in established state by re-arming the SYNACK timer after the fast (SYNACK) retransmit. The timer may fire late up to 500ms due to the current SYNACK timer wheel, but it's OK to be conservative when network is congested. Eric's new listener design should address this issue. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29net: Add MIB counters for checksum errorsEric Dumazet
Add MIB counters for checksum errors in IP layer, and TCP/UDP/ICMP layers, to help diagnose problems. $ nstat -a | grep Csum IcmpInCsumErrors 72 0.0 TcpInCsumErrors 382 0.0 UdpInCsumErrors 463221 0.0 Icmp6InCsumErrors 75 0.0 Udp6InCsumErrors 173442 0.0 IpExtInCsumErrors 10884 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29tg3: shows HW time stamping support only if ptp_capable is presentFlavio Leitner
Current tg3 shows hardware timestamping support for all devices when that is true only for the hardware with PTP_CAPABLE flag present. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29net: defer net_secret[] initializationEric Dumazet
Instead of feeding net_secret[] at boot time, defer the init at the point first socket is created. This permits some platforms to use better entropy sources than the ones available at boot time. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29be2net: FLR must be first cmd issued to Lancer FWKalesh AP
Lancer FW requires that the first cmd issued by the host-driver be an FLR. So, re-order be_probe() to move be_cmd_function_reset() ahead of be_cmd_fw_init(). Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29be2net: Use GET_FUNCTION_CONFIG V1 cmdKalesh AP
Skyhawk-R requires V1 version of GET_FUNCTION_CONFIG cmd to be used for querrying resources available per function. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29Merge tag 'nfc-next-3.10-4' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "With this one we have: - One patch for moving the LLCP code into net/nfc. It fixes a build annoyance reported by Dave Miller caused by the fact that the LLCP code object targets are not in the same directory as the Makefile trying to build them is. It prevents us from doing e.g. make net/nfc/llcp/sock.o Moving the LLCP code into net/nfc and not making it optional anymore makes sense as LLCP is a fundamental piece of the NFC specifications and thus should be in the core NFC directory. - One patch that fixes the missing dependency against RFKILL. Without it NFC fails to properly build when it's builtin and CONFIG_RFKILL=m." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next Pablo Neira Ayuso says: ==================== The following patchset contains relevant updates for the Netfilter tree, they are: * Enhancements for ipset: Add the counter extension for sets, this information can be used from the iptables set match, to change the matching behaviour. Jozsef required to add the extension infrastructure and moved the existing timeout support upon it. This also includes a change in net/sched/em_ipset to adapt it to the new extension structure. * Enhancements for performance boosting in nfnetlink_queue: Add new configuration flags that allows user-space to receive big packets (GRO) and to disable checksumming calculation. This were proposed by Eric Dumazet during the Netfilter Workshop 2013 in Copenhagen. Florian Westphal was kind enough to find the time to materialize the proposal. * A sparse fix from Simon, he noticed it in the SCTP NAT helper, the fix required a change in the interface of sctp_end_cksum. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29sh_eth: add R8A77781 supportSergei Shtylyov
Add support for another ARM member of the R-Car family, R-Car M1A, also known as R8A77781 -- it will share the code with previously added R8A77790. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29r8169: fix 8168evl frame padding.Stefan Bader
Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29sctp: Correct type and usage of sctp_end_cksum()Simon Horman
Change the type of the crc32 parameter of sctp_end_cksum() from __be32 to __u32 to reflect that fact that it is passed to cpu_to_le32(). There are five in-tree users of sctp_end_cksum(). The following four had warnings flagged by sparse which are no longer present with this change. net/netfilter/ipvs/ip_vs_proto_sctp.c:sctp_nat_csum() net/netfilter/ipvs/ip_vs_proto_sctp.c:sctp_csum_check() net/sctp/input.c:sctp_rcv_checksum() net/sctp/output.c:sctp_packet_transmit() The fifth user is net/netfilter/nf_nat_proto_sctp.c:sctp_manip_pkt(). It has been updated to pass a __u32 instead of a __be32, the value in question was already calculated in cpu byte-order. net/netfilter/nf_nat_proto_sctp.c:sctp_manip_pkt() has also been updated to assign the return value of sctp_end_cksum() directly to a variable of type __le32, matching the type of the return value. Previously the return value was assigned to a variable of type __be32 and then that variable was finally assigned to another variable of type __le32. Problems flagged by sparse. Compile and sparse tested only. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: nfnetlink_queue: avoid expensive gso segmentation and checksum fixupFlorian Westphal
Userspace can now indicate that it can cope with larger-than-mtu sized packets and packets that have invalid ipv4/tcp checksums. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: nfnetlink_queue: add skb info attributeFlorian Westphal
Once we allow userspace to receive gso/gro packets, userspace needs to be able to determine when checksums appear to be broken, but are not. NFQA_SKB_CSUMNOTREADY means 'checksums will be fixed in kernel later, pretend they are ok'. NFQA_SKB_GSO could be used for statistics, or to determine when packet size exceeds mtu. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: move skb_gso_segment into nfnetlink_queue moduleFlorian Westphal
skb_gso_segment is expensive, so it would be nice if we could avoid it in the future. However, userspace needs to be prepared to receive larger-than-mtu-packets (which will also have incorrect l3/l4 checksums), so we cannot simply remove it. The plan is to add a per-queue feature flag that userspace can set when binding the queue. The problem is that in nf_queue, we only have a queue number, not the queue context/configuration settings. This patch should have no impact other than the skb_gso_segment call now being in a function that has access to the queue config data. A new size attribute in nf_queue_entry is needed so nfnetlink_queue can duplicate the entry of the gso skb when segmenting the skb while also copying the route key. The follow up patch adds switch to disable skb_gso_segment when queue config says so. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: nf_queue: move device refcount bump to extra functionFlorian Westphal
required by future patch that will need to duplicate the nf_queue_entry, bumping refcounts of the copy. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: set match: add support to match the countersJozsef Kadlecsik
The new revision of the set match supports to match the counters and to suppress updating the counters at matching too. At the set:list types, the updating of the subcounters can be suppressed as well. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: The list:set type with counter supportJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: The hash types with counter supportJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: The bitmap types with counter supportJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: Introduce the counter extension in the coreJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: list:set type using the extension interfaceJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: Hash types using the unified code baseJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: Unified hash type generationJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: Bitmap types using the unified code baseJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-29netfilter: ipset: Unified bitmap type generationJozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 11:14:28 +0000