Age | Commit message (Collapse) | Author |
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing changed in the clk framework core this time around. We did get
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of
data to describe clks on various SoCs and fix bugs. The other big new
thing in here is the Mediatek MT8192 clk driver. That's been under
review for a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk
drivers. There are some non-clk driver bits in here which have all
been acked by the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
dt-bindings: clock: samsung: fix header path in example
clk: tegra: fix old-style declaration
clk: qcom: Add SM6350 GCC driver
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: clk-generated: Limit the requested rate to our range
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mtk:
- added support for mt8192 and mt8195
- minor fix regarding address shift
- qcom:
- added compatibles for MSM8953, SM6350 and SM6115
- enable loading IPCC as a module
- misc:
- change Altera maintainer
- fix sti kernel-doc warnings
* tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: cmdq: add multi-gce clocks support for mt8195
mailbox: cmdq: add mediatek mailbox support for mt8195
dt-bindings: gce: add gce header file for mt8195
dt-bindings: mailbox: add definition for mt8195
mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
dt-bindings: mailbox: Add compatible for the MSM8953
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350
mailbox: qcom: Add support for SM6115 APCS IPC
dt-bindings: mailbox: qcom: Add SM6115 APCS compatible
soc: mediatek: cmdq: add address shift in jump
mailbox: cmdq: add mt8192 support
dt-binding: gce: add gce header file for mt8192
MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer
mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module
mailbox: sti: quieten kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's
work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including support for
/sys/firmware/acpi/platform_profile
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place"
* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
platform/x86: ISST: use semi-colons instead of commas
platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
platform/x86: asus-wmi: Delete impossible condition
platform/x86: hp_accel: Convert to be a platform driver
platform/x86: hp_accel: Remove _INI method call
platform/mellanox: mlxbf-pmc: fix kernel-doc notation
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
platform/x86: intel-vbtn: Move to intel sub-directory
platform/x86: intel_oaktrail: Move to intel sub-directory
platform/x86: intel_int0002_vgpio: Move to intel sub-directory
platform/x86: intel-hid: Move to intel sub-directory
platform/x86: intel_atomisp2: Move to intel sub-directory
platform/x86: intel_speed_select_if: Move to intel sub-directory
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, direct I/O and fsdax support for uncompressed files are
now added in order to avoid double-caching for loop device and VM
container use cases. All uncompressed cases are now turned into iomap
infrastructure, which looks much simpler and cleaner.
In addition, fiemap support is added for both (un)compressed files by
using iomap infrastructure as well so end users can easily get file
distribution. We've also added chunk-based uncompressed files support
for data deduplication as the next step of VM container use cases.
Summary:
- support direct I/O for all uncompressed files
- support fsdax for non-tailpacking regular files
- use iomap infrastructure for all uncompressed cases
- support fiemap for both (un)compressed files
- introduce chunk-based files for chunk deduplication
- some cleanups"
* tag 'erofs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix double free of 'copied'
erofs: support reading chunk-based uncompressed files
erofs: introduce chunk-based file on-disk format
erofs: add fiemap support with iomap
erofs: add support for the full decompressed length
erofs: remove the mapping parameter from erofs_try_to_free_cached_page()
erofs: directly use wrapper erofs_page_is_managed() when shrinking
erofs: convert all uncompressed cases to iomap
erofs: dax support for non-tailpacking regular file
erofs: iomap support for non-tailpacking DIO
|
|
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor arch kdump DT related code to a common implementation
- Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
'resets', and 'pwm' properties
- Various clean-ups to DT FDT code
- Fix a runtime error for !CONFIG_SYSFS
- Convert Synopsys DW PCI and derivative binding docs to schemas. Add
Toshiba Visconti PCIe binding.
- Convert a bunch of memory controller bindings to schemas
- Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.
- Extend nvmem bindings to handle bit offsets in unit-addresses
- Add DT schemas for HiKey 970 PCIe PHY
- Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings
- Enable dtc pci_device_reg warning by default
- Fixes for handling 'unevaluatedProperties' in preparation to enable
pending support in the tooling for jsonschema 2020-12 draft
* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
dt-bindings: display: remove zte,vou.txt binding doc
dt-bindings: hwmon: merge max1619 into trivial devices
dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
dt-bindings: Add vendor prefix for Topic Embedded Systems
of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
arm64: kdump: Remove custom linux,usable-memory-range handling
arm64: kdump: Remove custom linux,elfcorehdr handling
riscv: Remove non-standard linux,elfcorehdr handling
of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
of: fdt: Add generic support for handling usable memory range property
of: fdt: Add generic support for handling elf core headers property
crash_dump: Make elfcorehdr address/size symbols always visible
dt-bindings: memory: convert Samsung Exynos DMC to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
kbuild: Enable dtc 'pci_device_reg' warning by default
dt-bindings: soc: remove obsolete zte zx header
dt-bindings: clock: remove obsolete zte zx header
...
|
|
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, the bulk of work in the SoC tree goes into DT files, this
time with a roughly even split between 32-bit and 64-bit SoCs rather
than the usual mostly 64-bit changes.
New SoCs:
- Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
platform based on the older SAMA5 series.
- Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
phone SoCs.
- Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
SoCs.
New boards:
- Marvell CN913x reference boards
- ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
and Fuji server boards.
- Snapdragon 665 based Sony Xperia 10II
- Snapdragon MSM8916 based Xiaomi Redmi 2
- Snapdragon MSM8226 based Samsung Galaxy S3 Neo
- NXP i.MX based 32-bit boards:
- DHCOM based PicoITX
- DHSOM based DRC0ỉ
- SolidRun SolidSense
- SKOV i.MX6 boards.
- NXP i.MX based 64-bit boards:
- Nitrogen8 SoM and MNT Reform2
- LS1088A based Traverse Ten64
- i.MX8M based GW7902.
- NVIDIA Jetson TX2 NX Developer Kit
- 4KOpen STiH418-b2264 development board
- ux500 based Samsung phones: Gavini, Codina and Kyle
- TI AM335x based Sancloud BBE Lite
- ixp4xx dts files to replace all old board files
Other changes:
- Treewide fixes for dtc warnings
- Rockchips i/o domain support
- TI OMAP/AM3 CPSW switch driver support
- Improved device support for allwinner, aspeed, qualcomm, NXP,
nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
OMAP and actions"
* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
ARM: dts: rockchip: Add SFC to RV1108
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
dt-bindings: vendor-prefixes: add Traverse Technologies
arm64: dts: add device tree for Traverse Ten64 (LS1088A)
arm64: dts: ls1088a: add missing PMU node
arm64: dts: ls1088a: add internal PCS for DPMAC1 node
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
arm64: dts: imx8mq-reform2: add sound support
arm64: dts: imx8m: drop interrupt-affinity for pmu
arm64: dts: imx8qxp: update pmu compatible
arm64: dts: imx8mm: update pmu compatible
...
|
|
'clk-ralink' into clk-next
* clk-kirkwood:
clk: kirkwood: Fix a clocking boot regression
* clk-imx:
clk: imx8mn: Add M7 core clock
clk: imx8m: fix clock tree update of TF-A managed clocks
clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate
clk: imx8mn: use correct mux type for clkout path
clk: imx8mm: use correct mux type for clkout path
* clk-doc:
dt-bindings: clock: samsung: fix header path in example
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings
clk: zynqmp: fix kernel doc
* clk-zynq:
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
* clk-ralink:
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
|
|
clk-next
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
* clk-nvidia:
clk: tegra: fix old-style declaration
clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
* clk-rockchip:
clk: rockchip: make rk3308 ddrphy4x clock critical
clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema
clk: rockchip: Add support for hclk_sfc on rk3036
clk: rockchip: rk3036: fix up the sclk_sfc parent error
clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036
* clk-at91:
clk: at91: clk-generated: Limit the requested rate to our range
* clk-vc5:
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
|
|
'clk-x86' into clk-next
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- Migrate to clk_parent_data in gcc-sdm660
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
* clk-qcom: (38 commits)
clk: qcom: Add SM6350 GCC driver
dt-bindings: clock: Add SM6350 GCC clock bindings
clk: qcom: rpmh: Add support for RPMH clocks on SM6350
dt-bindings: clock: Add RPMHCC bindings for SM6350
clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250
clk: qcom: Add Global Clock controller (GCC) driver for SM6115
dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC
clk: qcom: mmcc-msm8994: Add MSM8992 support
clk: qcom: Add msm8994 MMCC driver
dt-bindings: clock: Add support for MSM8992/4 MMCC
clk: qcom: Add Global Clock Controller driver for MSM8953
dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings
clk: qcom: gcc-sdm660: Replace usage of parent_names
clk: qcom: gcc-sdm660: Move parent tables after PLLs
clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create
PM: runtime: add devm_pm_clk_create helper
PM: runtime: add devm_pm_runtime_enable helper
clk: qcom: a53-pll: Add MSM8939 a53pll support
dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
clk: qcom: a53pll/mux: Use unique clock name
...
* clk-socfpga:
clk: socfpga: agilex: add the bypass register for s2f_usr0 clock
clk: socfpga: agilex: fix up s2f_user0_clk representation
clk: socfpga: agilex: fix the parents of the psi_ref_clk
* clk-mediatek: (22 commits)
clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167
clk: mediatek: Add MT8192 vencsys clock support
clk: mediatek: Add MT8192 vdecsys clock support
clk: mediatek: Add MT8192 scp adsp clock support
clk: mediatek: Add MT8192 msdc clock support
clk: mediatek: Add MT8192 mmsys clock support
clk: mediatek: Add MT8192 mfgcfg clock support
clk: mediatek: Add MT8192 mdpsys clock support
clk: mediatek: Add MT8192 ipesys clock support
clk: mediatek: Add MT8192 imp i2c wrapper clock support
clk: mediatek: Add MT8192 imgsys clock support
clk: mediatek: Add MT8192 camsys clock support
clk: mediatek: Add MT8192 audio clock support
clk: mediatek: Add MT8192 basic clocks support
clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers
clk: mediatek: Add configurable enable control to mtk_pll_data
clk: mediatek: Fix asymmetrical PLL enable and disable control
clk: mediatek: Get regmap without syscon compatible check
clk: mediatek: Add dt-bindings of MT8192 clocks
dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192
...
* clk-lmk:
clk: lmk04832: drop redundant fallthrough statements
* clk-x86:
clk: x86: Rename clk-lpt to more specific clk-lpss-atom
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are a few intensive changes in ALSA core side at this time that
helped with significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for
controlling the explicit sync of the stream control; it'll be used
for ASoC SOF and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support"
* tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits)
ASoC: Revert PCM trigger changes
ALSA: usb-audio: Add lowlatency module option
ALSA: hda/cs8409: Initialize Codec only in init fixup.
ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary
ALSA: usb-audio: Work around for XRUN with low latency playback
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ASoC: soc-pcm: test refcount before triggering
ASoC: soc-pcm: protect BE dailink state changes in trigger
ASoC: wcd9335: Disable irq on slave ports in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Fix a double irq free in the remove function
ALSA: hda: Disable runtime resume at shutdown
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Improve dma data transfer efficiency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e890605 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae00a ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
The proper header is exynos4.h:
samsung,exynos4412-isp-clock.example.dts:19:18: fatal error: dt-bindings/clock/exynos4412.h: No such file or directory
Fixes: 7ac615780926 ("dt-bindings: clock: samsung: convert Exynos4 to dtschema")
Reported-by: Stephen Boyd <sboyd@kernel.org>
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210831130643.83249-1-krzysztof.kozlowski@canonical.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add definition of compatible and dt-binding header for mt8195.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Two cpuset behavior changes:
- cpuset on cgroup2 is changed to enable memory migration based on
nodemask by default.
- A notification is generated when cpuset partition state changes.
All other patches are minor fixes and cleanups"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Avoid compiler warnings with no subsystems
cgroup/cpuset: Avoid memory migration when nodemasks match
cgroup/cpuset: Enable memory migration for cpuset v2
cgroup/cpuset: Enable event notification when partition state changes
cgroup: cgroup-v1: clean up kernel-doc notation
cgroup: Replace deprecated CPU-hotplug functions.
cgroup/cpuset: Fix violation of cpuset locking rule
cgroup/cpuset: Fix a partition bug with hotplug
cgroup/cpuset: Miscellaneous code cleanup
cgroup: remove cgroup_mount from comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM infrastructure for IMA-based remote attestion. These changes
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured via
IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
* tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: use in_hardirq() instead of deprecated in_irq()
dm ima: update dm documentation for ima measurement support
dm ima: update dm target attributes for ima measurements
dm ima: add a warning in dm_init if duplicate ima events are not measured
dm ima: prefix ima event name related to device mapper with dm_
dm ima: add version info to dm related events in ima log
dm ima: prefix dm table hashes in ima log with hash algorithm
dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
dm: add documentation for IMA measurement support
dm: update target status functions to support IMA measurement
dm ima: measure data on device rename
dm ima: measure data on table clear
dm ima: measure data on device remove
dm ima: measure data on device resume
dm ima: measure data on table load
dm writecache: add event counters
dm writecache: report invalid return from writecache_map helpers
dm writecache: further writecache_map() cleanup
dm writecache: factor out writecache_map_remap_origin()
dm writecache: split up writecache_map() to improve code readability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Usual driver changes, some documentation that should hopefully get LED
names standartized, and many fixes"
* tag 'leds-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (32 commits)
leds: pca955x: Switch to i2c probe_new
leds: pca955x: Let the core process the fwnode
leds: pca955x: Implement the default-state property
leds: pca955x: Add brightness_get function
leds: pca955x: Clean up code formatting
leds: leds-core: Implement the retain-state-shutdown property
dt-bindings: leds: Add retain-state-shutdown boolean
Documentation: leds: standartizing LED names
leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA
leds: lp50xx: Fix chip name in KConfig
leds: pwm: add support for default-state device property
leds: move default_state read from fwnode to core
leds: flash: Remove redundant initialization of variable ret
leds: lgm-sso: Propagate error codes from callee to caller
leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
leds: rt8515: Put fwnode in any case during ->probe()
leds: lt3593: Put fwnode in any case during ->probe()
leds: lm3697: Make error handling more robust
leds: lm3697: Update header block to reflect reality
leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for:
- Aquacomputer D5 Next
- SB-RMI power module
Added chip support to existing drivers:
- Support for various Zen2 and Zen3 APUs and for Yellow Carp (SMU
v13) added to k10temp driver
- Support for Silicom n5010 PAC added to intel-m10-bmc driver
- Support for BPD-RS600 added to pmbus/bpa-rs600 driver
Other notable changes:
- In k10temp, do not display Tdie on Zen CPUs if there is no
difference between Tdie and Tctl
- Converted adt7470 and dell-smm drivers to use
devm_hwmon_device_register_with_info API
- Support for temperature/pwm tables added to axi-fan-control driver
- Enabled fan control for Dell Precision 7510 in dell-smm driver
Various other minor improvements and fixes in several drivers"
* tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
hwmon: add driver for Aquacomputer D5 Next
hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
hwmon: (adt7470) Convert to use regmap
hwmon: (adt7470) Fix some style issues
hwmon: (k10temp) Add support for yellow carp
hwmon: (k10temp) Rework the temperature offset calculation
hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs
hwmon: remove amd_energy driver in Makefile
hwmon: (dell-smm) Rework SMM function debugging
hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
hwmon: (dell-smm) Mark tables as __initconst
hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
hwmon: (axi-fan-control) Support temperature vs pwm points
hwmon: (axi-fan-control) Handle irqs in natural order
hwmon: (axi-fan-control) Make sure the clock is enabled
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
hwmon: (w83781d) Match on device tree compatibles
dt-bindings: hwmon: Add bindings for Winbond W83781D
...
|
|
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Return a proper response in case of an ioctl error
- Issue HPI to interrupt BKOPS for eMMC if it timed out
- Avoid hogging the CPU while polling for busy
- Extend sd8787 pwrseq to support the wilc1000 SDIO
- Remove a couple of confusing warning messages
- Clarify comment for ->card_busy() host ops
MMC host:
- dw_mmc: Add data CRC error injection
- mmci: De-assert reset during ->probe()
- rtsx_pci: Fix long reads when clock is pre-scaled
- sdhci: Correct the tuning command handle for PIO mode
- sdhci-esdhc-imx: Improve support for auto tuning
- sdhci-msm: Add support for the sc7280
- sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
- sdhci-of-arasan: Enable support for auto cmd12
- sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
- usdhi6rol0: Implement the ->card_busy() host ops
MEMSTICK:
- A couple of minor cleanups"
* tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: queue: Remove unused parameters(request_queue)
mmc: pwrseq: sd8787: fix compilation warning
mmc: core: Return correct emmc response in case of ioctl error
mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning
mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning
mmc: core: Issue HPI in case the BKOPS timed out
mmc: queue: Match the data type of max_segments
mmc: switch from 'pci_' to 'dma_' API
memstick: switch from 'pci_' to 'dma_' API
memstick: r592: Change the name of the 'pci_driver' structure to be consistent
mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
mmc: pwrseq: sd8787: add support for wilc1000
dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000
dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule
dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
mmc: core: Update ->card_busy() callback comment
mmc: usdhi6rol0: Implement card_busy function
mmc: sdhci: Correct the tuning command handle for PIO mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20210730,
clean up the ACPI companion binding code, optimize the I2C handling in
the XPower PMIC driver, add 16550-compatible Serial Port Subtype
support to the SPCR parsing code, add a few LoongArch support bits,
add a ne quirk to the button driver, add new PCH FIVR methods to the
DPTF code, replace deprecated CPU-hotplug functions in the processor
driver, improve the acpi_os_map_memory() handling on non-x86 and do
some assorted cleanups.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20210730
including the following changes:
- Add support for the AEST table (data compiler) to iASL (Bob
Moore)
- Fix an if statement (add parens) (Bob Moore)
- Drop trailing semicolon from some macros (Bob Moore)
- Fix compilation of WPBT table with no command-line arguments in
iASL (Bob Moore)
- Add method name "_DIS" for use with aslmethod.c (Bob Moore)
- Add new DBG2 Serial Port Subtypes (Marcin Wojtas)
- Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)
- Add support for the new 16550-compatible Serial Port Subtype to the
SPCR table parsing code (Marcin Wojtas)
- Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
(Ulrich Huber)
- Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)
- Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)
- Replace deprecated CPU-hotplug functions in the ACPI processor
driver (Sebastian Andrzej Siewior)
- Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)
- Make platform-profile catch profile changes initiated by user space
and notify user processes of them (Hans de Goede)
- Clean up the ACPI companion binding and unbinding code and update
debug messaging in the ACPI power resources code (Rafael Wysocki)
- Clean up a couple of code pieces related to configfs (Andy
Shevchenko)
- Rearrange the FPDT table parsing code to avoid printing warning
messages for reserved record types (Adrian Huang)"
* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
ACPI: power: Drop name from struct acpi_power_resource
ACPI: power: Use acpi_handle_debug() to print debug messages
ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
ACPI: Add memory semantics to acpi_os_map_memory()
ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
ACPICA: Update version to 20210730
ACPICA: Add method name "_DIS" For use with aslmethod.c
ACPICA: iASL: Fix for WPBT table with no command-line arguments
ACPICA: Headers: Add new DBG2 Serial Port Subtypes
ACPICA: Macros should not use a trailing semicolon
ACPICA: Fix an if statement (add parens)
ACPICA: iASL: Add support for the AEST table (data compiler)
ACPI: processor: Replace deprecated CPU-hotplug functions
ACPI: DPTF: Add new PCH FIVR methods
ACPI: configfs: Make get_header() to return error pointer
ACPI: configfs: Use sysfs_emit() in "show" functions
driver core: Split device_platform_notify()
software nodes: Split software_node_notify()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapping documentation updates from Christian Brauner:
"The bulk of the idmapped work this cycle was adding support for
idmapped mounts to btrfs.
While this required the addition of a (simple) new vfs helper all the
work is going through David Sterba's btrfs tree. It was way simpler to
do it this way rather then forcing David to coordinate between his
btrfs and my tree. Plus I don't care who merges it as long as I feel I
can trust the maintainer and the btrfs folks were really fast and
helpful in reviewing this work.
As always, associated with the btrfs port for idmapped mounts is a new
fstests extension specifically concerned with btrfs ioctls (e.g.
subvolume creation, deletion etc.) on idmapped mounts which can be
found in the fstests repo as 5f8179ce8b00 ("btrfs: introduce btrfs
specific idmapped mounts tests").
Consequently, this cycle the idmapping pull is boring. It only
contains documentation updates, specifically about how idmappings and
idmapped mounts work"
* tag 'fs.idmapped.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
doc: give a more thorough id handling explanation
|
|
Pull nfsd updates from Chuck Lever:
"New features:
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames"
* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
nfsd: fix crash on LOCKT on reexported NFSv3
nfs: don't allow reexport reclaims
lockd: don't attempt blocking locks on nfs reexports
nfs: don't atempt blocking locks on nfs reexports
Keep read and write fds with each nlm_file
lockd: update nlm_lookup_file reexport comment
nlm: minor refactoring
nlm: minor nlm_lookup_file argument change
lockd: lockd server-side shouldn't set fl_ops
SUNRPC: Add documentation for the fail_sunrpc/ directory
SUNRPC: Server-side disconnect injection
SUNRPC: Move client-side disconnect injection
SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
nfsd4: Fix forced-expiry locking
rpc: fix gss_svc_init cleanup on failure
SUNRPC: Add RPC_AUTH_TLS protocol numbers
lockd: change the proc_handler for nsm_use_hostnames
sysctl: introduce new proc handler proc_dobool
SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
...
|
|
Pull fscrypt updates from Eric Biggers:
"Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks
- Use base64url instead of a custom Base64 variant
- Document struct fscrypt_operations"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: document struct fscrypt_operations
fscrypt: align Base64 encoding with RFC 4648 base64url
fscrypt: remove mention of symlink st_size quirk from documentation
ubifs: report correct st_size for encrypted symlinks
f2fs: report correct st_size for encrypted symlinks
ext4: report correct st_size for encrypted symlinks
fscrypt: add fscrypt_symlink_getattr() for computing st_size
|
|
Pull initial ksmbd implementation from Steve French:
"Initial merge of kernel smb3 file server, ksmbd.
The SMB family of protocols is the most widely deployed network
filesystem protocol, the default on Windows and Macs (and even on many
phones and tablets), with clients and servers on all major operating
systems, but lacked a kernel server for Linux. For many cases the
current userspace server choices were suboptimal either due to memory
footprint, performance or difficulty integrating well with advanced
Linux features.
ksmbd is a new kernel module which implements the server-side of the
SMB3 protocol. The target is to provide optimized performance, GPLv2
SMB server, and better lease handling (distributed caching). The
bigger goal is to add new features more rapidly (e.g. RDMA aka
"smbdirect", and recent encryption and signing improvements to the
protocol) which are easier to develop on a smaller, more tightly
optimized kernel server than for example in Samba.
The Samba project is much broader in scope (tools, security services,
LDAP, Active Directory Domain Controller, and a cross platform file
server for a wider variety of purposes) but the user space file server
portion of Samba has proved hard to optimize for some Linux workloads,
including for smaller devices.
This is not meant to replace Samba, but rather be an extension to
allow better optimizing for Linux, and will continue to integrate well
with Samba user space tools and libraries where appropriate. Working
with the Samba team we have already made sure that the configuration
files and xattrs are in a compatible format between the kernel and
user space server.
Various types of functional and regression tests are regularly run
against it. One example is the automated 'buildbot' regression tests
which use the Linux client to test against ksmbd, e.g.
http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56
but other test suites, including Samba's smbtorture functional test
suite are also used regularly"
* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
ksmbd: fix __write_overflow warning in ndr_read_string
MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
MAINTAINERS: ksmbd: update my email address
ksmbd: fix permission check issue on chown and chmod
ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
MAINTAINERS: add git adddress of ksmbd
ksmbd: update SMB3 multi-channel support in ksmbd.rst
ksmbd: smbd: fix kernel oops during server shutdown
ksmbd: remove select FS_POSIX_ACL in Kconfig
ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
ksmbd: update the comment for smb2_get_ksmbd_tcon()
ksmbd: change int data type to boolean
ksmbd: Fix multi-protocol negotiation
ksmbd: fix an oops in error handling in smb2_open()
ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
ksmbd: fix missing error code in smb2_lock
ksmbd: use channel signingkey for binding SMB2 session setup
ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
ksmbd: fix -Wstringop-truncation warnings
...
|
|
The zte zx platform was removed in commit 89d4f98ae90d ("ARM: remove zte
zx platform") and the zxdrm driver is going to be removed in v5.15 via
drm tree. Let's remove the now obsolete binding doc.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20210831034924.86-1-yuzenghui@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Ther Maxim max1619 bindings are trivial, so simply merge it into
trivial-devices.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210819182544.224121-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The 'arm,vexpress-flash' compatible is in use, but has never been documented,
so add it now.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210819182427.1175753-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
* tip/sched/arm64: (785 commits)
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system
arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0
arm64: Implement task_cpu_possible_mask()
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
Linux 5.14-rc6
lib: use PFN_PHYS() in devmem_is_allowed()
...
|
|
Add documentation about the orphan file feature.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pull libata updates from Jens Axboe:
"libata changes for the 5.15 release:
- NCQ priority improvements (Damien, Niklas)
- coccinelle warning fix (Jing)
- dwc_460ex phy fix (Andy)"
* tag 'for-5.15/libata-2021-08-30' of git://git.kernel.dk/linux-block:
include:libata: fix boolreturn.cocci warnings
docs: sysfs-block-device: document ncq_prio_supported
docs: sysfs-block-device: improve ncq_prio_enable documentation
libata: Introduce ncq_prio_supported sysfs sttribute
libata: print feature list on device scan
libata: fix ata_read_log_page() warning
libata: cleanup NCQ priority handling
libata: cleanup ata_dev_configure()
libata: cleanup device sleep capability detection
libata: simplify ata_scsi_rbuf_fill()
libata: fix ata_host_start()
ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
|
|
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|