summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2015-10-14Revert "ipv4/icmp: redirect messages can use the ingress daddr as source"Paolo Abeni
Revert the commit e2ca690b657f ("ipv4/icmp: redirect messages can use the ingress daddr as source"), which tried to introduce a more suitable behaviour for ICMP redirect messages generated by VRRP routers. However RFC 5798 section 8.1.1 states: The IPv4 source address of an ICMP redirect should be the address that the end-host used when making its next-hop routing decision. while said commit used the generating packet destination address, which do not match the above and in most cases leads to no redirect packets to be generated. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: vrf: Documentation update, ip commandsDavid Ahern
Add ip commands with examples for creating VRF devics, enslaving interfaces and dumping VRF-focused data (address, neighbors, routes). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4/icmp: redirect messages can use the ingress daddr as sourcePaolo Abeni
This patch allows configuring how the source address of ICMP redirect messages is selected; by default the old behaviour is retained, while setting icmp_redirects_use_orig_daddr force the usage of the destination address of the packet that caused the redirect. The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the following scenario: Two machines are set up with VRRP to act as routers out of a subnet, they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to x.x.x.254/24. If a host in said subnet needs to get an ICMP redirect from the VRRP router, i.e. to reach a destination behind a different gateway, the source IP in the ICMP redirect is chosen as the primary IP on the interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2. The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2, and will continue to use the wrong next-op. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-10-08 Here's another set of Bluetooth & 802.15.4 patches for the 4.4 kernel. 802.15.4: - Many improvements & fixes to the mrf24j40 driver - Fixes and cleanups to nl802154, mac802154 & ieee802154 code Bluetooth: - New chipset support in btmrvl driver - Fixes & cleanups to btbcm, btmrvl, bpa10x & btintel drivers - Support for vendor specific diagnostic data through common API - Cleanups to the 6lowpan code - New events & message types for monitor channel Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08dt-bindings: net: Broadcom iProc MDIO bus driver device tree bindingArun Parameswaran
Add device tree binding documentation for the Broadcom iProc MDIO bus driver. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07doc: dt: net: Add fsl,wake-on-filer for eTSECClaudiu Manoil
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03ravb: Document binding for r8a7795 SoCKazuya Mizuguchi
This patch updates the ravb binding to support the r8a7795 SoC by: - Adding a compat string for the new hardware - Adding 25 named interrupts to binding for the new SoC; older SoCs continue to use a single multiplexed interrupt The example is also updated to reflect the r8a7795 as this is the more complex case. Based on work by Kazuya Mizuguchi and others. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_*Jiri Pirko
To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_*Jiri Pirko
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01Merge tag 'pm+acpi-4.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes mostly, for a few changes made in this cycle (the intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and for some issues that have just been discovered (ACPI PCI IRQ management, PCI power management documentation, turbostat), with a couple of cleanups on top of them. Specifics: - intel_idle driver fixup for the recently added Skylake chips support (Len Brown). - Operating Performance Points (OPP) library fix related to the recently added support for new DT bindings and a fix for a typo in a comment (Viresh Kumar, Stephen Boyd). - ACPI EC driver fix for a recently introduced memory leak in an error code path (Lv Zheng). - ACPI PCI IRQ management fix for the issue where an ISA IRQ is shared with a PCI device which requires it to be configured in a different way and may cause an interrupt storm to happen as a result with an extra ACPI SCI IRQ handling simplification on top of it (Jiang Liu). - Update of the PCI power management documentation that became outdated and started to actively confuse the readers to make it actually reflect the code (Rafael J Wysocki). - turbostat fixes including an IVB Xeon regression fix (related to the --debug command line option), Skylake adjustment for the TSC running at a frequency that doesn't match the base one exactly, and a Knights Landing quirk to account for the fact that it only updates APERF and MPERF every 1024 clock cycles plus bumping up the turbostat version number (Len Brown, Hubert Chrzaniuk)" * tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power turbosat: update version number tools/power turbostat: SKL: Adjust for TSC difference from base frequency tools/power turbostat: KNL workaround for %Busy and Avg_MHz tools/power turbostat: IVB Xeon: fix --debug regression ACPI / PCI: Remove duplicated penalty on SCI IRQ ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ ACPI / EC: Fix a memory leak issue in acpi_ec_query() PM / OPP: Fix typo modifcation -> modification PCI / PM: Update runtime PM documentation for PCI devices PM / OPP: of_property_count_u32_elems() can return errors intel_idle: Skylake Client Support - updated
2015-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
2015-10-01Merge branches 'pm-pci' and 'acpi-pci'Rafael J. Wysocki
* pm-pci: PCI / PM: Update runtime PM documentation for PCI devices * acpi-pci: ACPI / PCI: Remove duplicated penalty on SCI IRQ ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
2015-09-29testptp: Silence compiler warnings on ppc64Thomas Huth
When compiling Documentation/ptp/testptp.c the following compiler warnings are printed out: Documentation/ptp/testptp.c: In function ‘main’: Documentation/ptp/testptp.c:367:11: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 3 has type ‘__s64’ [-Wformat=] event.t.sec, event.t.nsec); ^ Documentation/ptp/testptp.c:505:5: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=] (pct+2*i)->sec, (pct+2*i)->nsec); ^ Documentation/ptp/testptp.c:507:5: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=] (pct+2*i+1)->sec, (pct+2*i+1)->nsec); ^ Documentation/ptp/testptp.c:509:5: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=] (pct+2*i+2)->sec, (pct+2*i+2)->nsec); This happens because __s64 is by default defined as "long" on ppc64, not as "long long". However, to fix these warnings, it's possible to define the __SANE_USERSPACE_TYPES__ so that __s64 gets defined to "long long" on ppc64, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29Merge tag 'keys-fixes-20150925' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus Keyrings fixes from David Howells, for current Linus.
2015-09-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: - Properly setup irq handling for ATH79 platforms - Fix bootmem mapstart calculation for contiguous maps - Handle little endian and older CPUs correct in BPF - Fix console for Fulong 2E systems - Handle FTLB correctly on R6 CPUs - Fixes for CM, GIC and MAAR support code * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Initialise MAARs on secondary CPUs MIPS: print MAAR configuration during boot MIPS: mm: compile maar_init unconditionally irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC. irqchip: mips-gic: Convert CPU numbers to VP IDs. MIPS: CM: Provide a function to map from CPU to VP ID. MIPS: Fix FTLB detection for R6 MIPS: cpu-features: Add cpu_has_ftlb MIPS: ATH79: Add irq chip ar7240-misc-intc MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip MIPS: BPF: Fix build on pre-R2 little endian CPUs MIPS: BPF: Avoid unreachable code on little endian MIPS: bootmem: Fix mapstart calculation for contiguous maps MIPS: Fix console output for Fulong2e system
2015-09-26Merge tag 'usb-4.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.3-rc3. There's the usual assortment of new device ids, combined with xhci and gadget driver fixes. Full details in the shortlog. All of these have been in linux-next with no reported problems" * tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits) MAINTAINERS: remove amd5536udc USB gadget driver maintainer USB: whiteheat: fix potential null-deref at probe xhci: init command timeout timer earlier to avoid deleting it uninitialized xhci: change xhci 1.0 only restrictions to support xhci 1.1 usb: xhci: exit early in xhci_setup_device() if we're halted or dying usb: xhci: stop everything on the first call to xhci_stop usb: xhci: Clear XHCI_STATE_DYING on start usb: xhci: lock mutex on xhci_stop xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM xhci: give command abortion one more chance before killing xhci usb: Use the USB_SS_MULT() macro to get the burst multiplier. usb: dwc3: gadget: Fix BUG in RT config usb: musb: fix cppi channel teardown for isoch transfer usb: phy: isp1301: Export I2C module alias information usb: gadget: drop null test before destroy functions usb: gadget: dummy_hcd: in transfer(), return data sent, not limit usb: gadget: dummy_hcd: fix rescan logic for transfer usb: gadget: dummy_hcd: fix unneeded else-if condition usb: gadget: dummy_hcd: emulate sending zlp in packet logic usb: musb: dsps: fix polling in device-only mode ...
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-25l2tp: remove references to modprobe in documentationstephen hemminger
No longer need explicit modprobe's and update to use ip instead of deprecated ifconfig command. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25Merge tag 'pci-v4.3-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
2015-09-25MODSIGN: Change from CMS to PKCS#7 signing if the openssl is too oldDavid Howells
The sign-file.c program actually uses CMS rather than PKCS#7 to sign a file since that allows the target X.509 certificate to be specified by subjectKeyId rather than by issuer + serialNumber. However, older versions of the OpenSSL crypto library (such as may be found in CentOS 5.11) don't support CMS. Assume everything prior to OpenSSL-1.0.0 doesn't support CMS and switch to using PKCS#7 in that case. Further, the pre-1.0.0 OpenSSL only supports PKCS#7 signing with SHA1, so give an error from the sign-file script if the caller requests anything other than SHA1. The compiler gives the following error with an OpenSSL crypto library that's too old: HOSTCC scripts/sign-file scripts/sign-file.c:23:25: fatal error: openssl/cms.h: No such file or directory #include <openssl/cms.h> Reported-by: Vinson Lee <vlee@twopensource.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com>
2015-09-24switchdev: introduce transaction item queue for attr_set and obj_addJiri Pirko
Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Power allocator governor changes to allow binding on thermal zones with missing power estimates information. From Javi Merino. - Add compile test flags on thermal drivers that allow it without producing compilation errors. From Eduardo Valentin. - Fixes around memory allocation on cpu_cooling. From Javi Merino. - Fix on db8500 cpufreq code to allow autoload. From Luis de Bethencourt. - Maintainer entries for cpu cooling device * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: power_allocator: exit early if there are no cooling devices thermal: power_allocator: don't require tzp to be present for the thermal zone thermal: power_allocator: relax the requirement of two passive trip points thermal: power_allocator: relax the requirement of a sustainable_power in tzp thermal: Add a function to get the minimum power thermal: cpu_cooling: free power table on error or when unregistering thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver thermal: cpu_cooling: Add MAINTAINERS entry thermal: ti-soc: Kconfig fix to avoid menu showing wrongly thermal: ti-soc: allow compile test thermal: qcom_spmi: allow compile test thermal: exynos: allow compile test thermal: armada: allow compile test thermal: dove: allow compile test thermal: kirkwood: allow compile test thermal: rockchip: allow compile test thermal: spear: allow compile test thermal: hisi: allow compile test thermal: Fix thermal_zone_of_sensor_register to match documentation
2015-09-25PCI / PM: Update runtime PM documentation for PCI devicesRafael J. Wysocki
Section 3.2 "Device Runtime Power Management" of pci.txt has become outdated, so update it to correctly reflect the current code flow. Also update the comment in local_pci_probe() to document the fact that pm_runtime_put_noidle() is not the only runtime PM helper function that can be used to decrement the device's runtime PM usage counter in .probe(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2015-09-24Merge tag 'devicetree-fixes-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Silence bogus warning for of_irq_parse_pci - Fix typo in ARM idle-states binding doc and dts files - Various minor binding documentation updates * tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: arm: Fix typo in the idle-states bindings examples gpio: mention in DT binding doc that <name>-gpio is deprecated of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages. devicetree: bindings: Extend the bma180 bindings with bma250 info of: thermal: Mark cooling-*-level properties optional of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level Docs: dt: add #msi-cells to GICv3 ITS binding of: add vendor prefix for Socionext Inc.
2015-09-24Documentation: arm: Fix typo in the idle-states bindings examplesLorenzo Pieralisi
The idle-states bindings mandate that the entry-method string in the idle-states node must be "psci" for ARM v8 64-bit systems, but the examples in the bindings report a wrong entry-method string. Owing to this typo, some dts in the kernel wrongly defined the entry-method property, since they likely cut and pasted the example definition without paying attention to the bindings definitions. This patch fixes the typo in the DT idle states bindings examples and respective dts in the kernel so that the bindings and related dts files are made compliant. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Howard Chen <howard.chen@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-24gpio: mention in DT binding doc that <name>-gpio is deprecatedJavier Martinez Canillas
The gpiolib supports parsing DT properties of the form <name>-gpio but it was only added for compatibility with older DT bindings that got it wrong and should not be used in newer bindings. The commit that added support for this was: dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names") but didn't update the documentation to explain this so it's been a source of confusion. So let's make this clear in the GPIO DT binding doc. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-24PCI: rcar: Add R8A7794 supportSergei Shtylyov
Add Renesas R8A7794 SoC support to the Renesas R-Car gen2 PCI driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-24Merge tag 'spi-fix-v4.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A disappointingly large collection of fixes for SPI issues, though almost all in drivers (and there mainly the newly added Mediatek driver) and the core fixes are documentation and error handling. The driver fixes are all of the usual 'important if you see them' variety" * tag 'spi-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: xtensa-xtfpga: fix register endianness spi: meson: Fix module autoload for OF platform driver spi: mediatek: fix wrong error return value on probe spi: fix kernel-doc warnings in spi.h spi: spidev: fix possible NULL dereference spi: atmel: remove warning when !CONFIG_PM_SLEEP spi: bcm2835: BUG: fix wrong use of PAGE_MASK spi: mediatek: fix spi cs polarity error spi: Fix documentation of spi_alloc_master() spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled spi: Mediatek: Document devicetree bindings update for spi bus spi: mediatek: fix spi clock usage error spi: mediatek: remove clk_disable_unprepare()
2015-09-23switchdev: update documentation on FDB ageing_timeScott Feldman
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree in this 4.4 development cycle, they are: 1) Schedule ICMP traffic to IPVS instances, this introduces a new schedule_icmp proc knob to enable/disable it. By default is off to retain the old behaviour. Patchset from Alex Gartrell. I'm also including what Alex originally said for the record: "The configuration of ipvs at Facebook is relatively straightforward. All ipvs instances bgp advertise a set of VIPs and the network prefers the nearest one or uses ECMP in the event of a tie. For the uninitiated, ECMP deterministically and statelessly load balances by hashing the packet (usually a 5-tuple of protocol, saddr, daddr, sport, and dport) and using that number as an index (basic hash table type logic). The problem is that ICMP packets (which contain really important information like whether or not an MTU has been exceeded) will get a different hash value and may end up at a different ipvs instance. With no information about where to route these packets, they are dropped, creating ICMP black holes and breaking Path MTU discovery. Suddenly, my mom's pictures can't load and I'm fielding midday calls that I want nothing to do with. To address this, this patch set introduces the ability to schedule icmp packets which is gated by a sysctl net.ipv4.vs.schedule_icmp. If set to 0, the old behavior is maintained -- otherwise ICMP packets are scheduled." 2) Add another proc entry to ignore tunneled packets to avoid routing loops from IPVS, also from Alex. 3) Fifteen patches from Eric Biederman to: * Stop passing nf_hook_ops as parameter to the hook and use the state hook object instead all around the netfilter code, so only the private data pointer is passed to the registered hook function. * Now that we've got state->net, propagate the netns pointer to netfilter hook clients to avoid its computation over and over again. A good example of how this has been simplified is the former TEE target (now nf_dup infrastructure) since it has killed the ugly pick_net() function. There's another round of netns updates from Eric Biederman making the line. To avoid the patchbomb again to almost all the networking mailing list (that is 84 patches) I'd suggest we send you a pull request with no patches or let me know if you prefer a better way. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22MIPS: ATH79: Add irq chip ar7240-misc-intcAlexander Couzens
The ar7240 misc irq chip use ack handler instead of ack_mask handler. All new ath79 chips use the ar7240 misc irq chip Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: Alban Bedel <albeu@free.fr> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bcm2835', ↵Mark Brown
'spi/fix/doc', 'spi/fix/mediatek', 'spi/fix/meson', 'spi/fix/mtk' and 'spi/fix/pxa2xx' into spi-linus
2015-09-22mrf24j40: add device-tree supportAlexander Aring
This patch adds devicetree support to mrf24j40 with proper devicetree compatible strings. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-21Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-09-18 Here's the first bluetooth-next pull request for the 4.4 kernel: - ieee802154 cleanups & fixes - debugfs support for the at86rf230 driver - Support for quirky (seemingly counterfeit) CSR Bluetooth controllers - Power management and device config improvements for Intel controllers - Fix for devices with incorrect advertising data length - Fix for closing HCI user channel socket Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21Merge remote-tracking branches 'regulator/fix/anatop', 'regulator/fix/gpio', ↵Mark Brown
'regulator/fix/pbias', 'regulator/fix/tpx65218' and 'regulator/fix/vexpress' into regulator-linus
2015-09-20Merge tag 'linux-can-next-for-4.4-20150917' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-09-17 this is a pull request of two patches for net-next/master. Gerhard Bertelsmann adds support for the CAN controller found on the Allwinner A10/A20 SoC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20net: add Hisilicon Network Subsystem support (config and documents)huangdaode
The Hisilicon Network Subsystem is a long term evolution IP which is supposed to be used in Hisilicon ICT SoC. The IP, which is called hns for short, is a TCP/IP acceleration engine, which can directly decode TCP/IP stream and distribute them to different ring buffers. HNS can be configured to work on different mode for different scenario. This patch make use only some of the mode to make it as standard ethernet NIC. The other mode will be added soon. The whole function has 4 kernel sub-modules: hnae: the HNS acceleration engine framework. It provides a abstract interface between the engine and the upper layers which make use of the engine by ring buffer. hns_enet_drv: a standard ethernet driver that base on the ring buffer. hns_dsaf: one of the implementation of HNS acceleration engine, which is applied on Hililicon hip05, Hi1610 and other later-on SoCs hns_mdio: the mdio control to the PHY, used by acceleration engine This submit add basic config and documents Signed-off-by: huangdaode <huangdaode@hisilicon.com> Signed-off-by: Kenneth Lee <liguozhu@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18Merge tag 'ipvs-for-v4.4' of ↵Pablo Neira Ayuso
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next Simon Horman says: ==================== IPVS Updates for v4.4 please consider these IPVS Updates for v4.4. The updates include the following from Alex Gartrell: * Scheduling of ICMP * Sysctl to ignore tunneled packets; and hence some packet-looping scenarios ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-17net: qdisc: enhance default_qdisc documentationPhil Sutter
Aside from some lingual cleanup, point out which interfaces are not or partly covered by this setting. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17net: Add documentation for VRF deviceDavid Ahern
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17can: Allwinner A10/A20 CAN Controller support - Devicetree bindingsGerhard Bertelsmann
Devicetree bindings for Allwinner A10/A20 CAN controller. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-09-17devicetree: bindings: Extend the bma180 bindings with bma250 infoHans de Goede
The bma180 / bma250 accelerometers share a driver (at least under Linux), so it makes sense to also have their bindings info in a single .txt. This commit extends the bma180 bindings with bma250 bindings, specifically it specifies how the 2 seperate interrupts the bma250 has must be listed in devicetree. The existing bma180 driver is already fully compatible with the specified bindings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-17of: thermal: Mark cooling-*-level properties optionalPunit Agrawal
The cooling-{min,max}-level properties are marked as optional in Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt and the usage in various device tree matches this, i.e., some cooling device in the device trees provide these properties while others do not. Make the bindings in Documentation/devicetree/bindings/thermal/thermal.txt consistent with the cpufreq-dt bindings by marking the cooling-*-level properties as optional. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-17of: thermal: Fix inconsitency between cooling-*-state and cooling-*-levelPunit Agrawal
The device trees in the kernel as well as the binding description in Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt use the cooling-{min,max}-level property. Fix the inconsistency with the binding description in Documentation/devicetree/bindings/thermal/thermal.txt by changing cooling-*-state properties to cooling-*-level. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-17Docs: dt: add #msi-cells to GICv3 ITS bindingMark Rutland
The GICv3 ITS uses sideband master identification data (known as a DeviceID) to identify which master wrote to a doorbell, and this data is used to determine how to react in response to the write. Commit 1e6db000482fa65a ("irqchip/gicv3-its: Add platform MSI support") added support per this binding, but failed to update the documentation. This patch fixes the documentation. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-17of: add vendor prefix for Socionext Inc.Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-09-17Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Spinlock performance regression fix, plus documentation fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/static_keys: Fix up the static keys documentation locking/qspinlock/x86: Only emit the test-and-set fallback when building guest support locking/qspinlock/x86: Fix performance regression under unaccelerated VMs locking/static_keys: Fix a silly typo
2015-09-17ieee802154: docs: fix project name to linux-wpan as well as some typosStefan Schmidt
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>