summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/clock_data.c
AgeCommit message (Collapse)Author
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-13ARM: OMAP1: fix USB host on 1710Aaro Koskinen
There is a long-standing bug that OHCI USB host controller does not respond on 1710, because of wrong clock definitions. See e.g. http://marc.info/?l=linux-omap&m=119634441229321&w=2. All register reads return just zeroes: [ 1.896606] ohci ohci: OMAP OHCI [ 1.912597] ohci ohci: new USB bus registered, assigned bus number 1 [ 1.933776] ohci ohci: irq 38, io mem 0xfffba000 [ 2.012573] ohci ohci: init err (00000000 0000) [ 2.030334] ohci ohci: can't start [ 2.046661] ohci ohci: startup error -75 [ 2.063201] ohci ohci: USB bus 1 deregistered After some experiments, it seems that when changing the usb_dc_ck / SOFT_REQ enable bit from USB_REQ_EN_SHIFT to SOFT_USB_OTG_DPLL_REQ_SHIFT (like done also on 7XX), the USB appears to work: [ 2.183959] ohci ohci: OMAP OHCI [ 2.198242] ohci ohci: new USB bus registered, assigned bus number 1 [ 2.215820] ohci ohci: irq 38, io mem 0xfffba000 [ 2.324798] hub 1-0:1.0: USB hub found [ 2.361267] hub 1-0:1.0: 3 ports detected The patch is tested on Nokia 770. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-31ARM: OMAP: Split sram.h to local headers and minimal shared headerTony Lindgren
Most of the defines are specific to omap1 and omap2+, and should be in the local headers. Only minimal function prototypes need to be shared. As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html So this patch re-adds a minimal plat/sram.h. The new plat/sram.h must not be included from drivers, that will break build for omap2+ CONFIG_MULTIPLATFORM. Note that this patch temporarily adds two more relative includes; Those will be removed in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren
We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 filesPaul Walmsley
To facilitate the ARM single image work, split arch/arm/plat-omap/include/plat/clkdev_omap.h into the arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h files. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: remove plat/clock.hPaul Walmsley
Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.cPaul Walmsley
Duplicate arch/arm/plat-omap/clock.c into arch/arm/mach-omap1/clock.c and arch/arm/mach-omap2/clock.c. This is to support people who are working on the ARM single image kernel and the OMAP common clock framework conversion. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17ARM: OMAP: Make plat/sram.h local to plat-omapTony Lindgren
We can move this from plat to be local to plat-omap for common ARM zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12Merge tag 'omap-cleanup-b-for-3.7' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into cleanup-makefile-sparse smatch and string-wrapping cleanups for the OMAP subarch code. These changes fix some of the more meaningful warnings that smatch returns for the OMAP subarch code, and unwraps strings that are wrapped at the 80-column boundary, to conform with the current practice. Basic build, boot, and PM logs are available here: http://www.pwsan.com/omap/testlogs/warnings_a_cleanup_3.7/20120912025927/
2012-09-12ARM: OMAP: unwrap stringsPaul Walmsley
Find and unwrap wrapped strings in the style: pr_debug("clockdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", clkdm1->name, clkdm2->name); Keeping these strings contiguous seems to be the current Linux kernel policy. The offending lines were found with the following command: pcregrep -rnM '"\s*$\s*"' arch/arm/*omap* While here, some messages have been clarified, some pr_warning( ... calls have been converted to pr_warn( ..., and some printk(KERN_* ... have been converted to pr_*. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-10ARM: OMAP1: remove the crystal type tag parsingIgor Grinberg
The omap1 crystal setting uses the OMAP custom tags. Those tags are not used in upstream kernel and therefore the crystal type is never set by the tag parsing code on upstream kernels. Remove the crystal tag parsing code. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-04ARM: OMAP: Make FS USB omap1 onlyTony Lindgren
As the FS USB code is not being actively used for omap2+ there's no point keeping it around for omap2+. Let's make the FS USB platform init code omap1 only so we can remove the last user of omap_read/write for omap2+, and simplify things for further USB, DMA, and device tree related work. While at it, also group the mach includes for the related drivers. Cc: linux-usb@vger.kernel.org Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP1: Move most of plat/io.h into local iomap.hTony Lindgren
There's no need to have these in plat/io.h. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08ARM: OMAP1: Always reprogram dpll1 rate at bootJanusz Krzysztofik
DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(). However, it is already forced at boot, for boards which boot at unusable clock rates, and this seems to work correctly. OTOH, we now have a fine, run time performed clock selection algorithm implemented, which prevents less powerfull SoCs from being overclocked unintentionally. Allow reprogramming of dpll1 by default, and use it for switching to the higest supported clock rate with all boards, including those already booting at a usable rate of 60 MHz or above. Created against linux-omap/master tip as of Thu Dec 1, commit f83c2a8cbb59981722d1ab610c79adfd034a2667. Requires the just submitted patch "ARM: OMAP1: Move dpll1 rates selection from config to runtime" to prevent from unintentional overclocking. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08ARM: OMAP1: Update dpll1 default rate reprogramming methodJanusz Krzysztofik
According to comments in omap1_select_table_rate(), reprogramming dpll1 is tricky, and should always be done from SRAM. While being at it, move OMAP730 special case handling inside omap_sram_reprogram_clock(). Created on top of version 2 of the series "ARM: OMAP1: Fix dpll1 reprogramming related issues", which it depends on. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08ARM: OMAP1: Move dpll1 rates selection from config to runtimeJanusz Krzysztofik
For still better multi-OMAP1 support, expand omap1_rate_table with flags for different SoC types and match them while selecting clock rates. The idea is stolen from current omap24xx clock rate selection algorithm. Since clkdev platform flag definitions are reused here, those had to be expanded with one extra entry for OMAP1710 subtype, as this is the only SoC for which we allow selection of the highest, 216 MHz rate. Once done, remove no longer needed clock rate configure time options. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-05ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogramJanusz Krzysztofik
Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-01ARM: OMAP1: Fix ckctl value used for dpll1 defualt rateJanusz Krzysztofik
Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-01ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below ↵Tony Lindgren
60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for figuring this one out. Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-11ARM: OMAP: Fix reprogramming of dpll1 rateTony Lindgren
Commit a66cb3454f220f49f900646ebdc76cb943319eb7 (ARM: OMAP: Map SRAM later on with ioremap_exec()) moved the SRAM init to happen later to remove a dependency to early SoC detection for map_io. This broke booting on some boards not using Kconfig option for OMAP_CLOCKS_SET_BY_BOOTLOADER as the dpll1 reprogramming would cause the following error: kernel BUG at arch/arm/plat-omap/sram.c:226! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.2.0-rc1-e3 #9) PC is at omap_sram_reprogram_clock+0x28/0x30 LR is at omap1_select_table_rate+0x88/0xb4 pc : [<c001b0c4>] lr : [<c0019f54>] psr: 600000d3 sp : c035bf10 ip : c035bf20 fp : c035bf1c r10: c035bfd4 r9 : 54029252 r8 : c03f8120 r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40 r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc035a270) Stack: (0xc035bf10 to 0xc035c000) bf00: c035bf3c c035bf20 c0019f54 c001b0ac bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40 c033ea24 c0019edc bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c 02000000 c035ed4c bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec c035bfc4 c035bf88 bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000 00000000 00000000 bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4 c035bff4 c035bfc8 bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c 0000317d c035c03c bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508 00000000 00000000 Backtrace: [<c001b09c>] (omap_sram_reprogram_clock+0x0/0x30) from [<c0019f54>] (omap1_select_table_rate+0x88/0xb4) [<c0019ecc>] (omap1_select_table_rate+0x0/0xb4) from [<c033ea24>] (omap1_clk_init+0x148/0x334) r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000 [<c033e8dc>] (omap1_clk_init+0x0/0x334) from [<c00194c4>] (omap1_init_early+0x34/0x48) r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c [<c0019490>] (omap1_init_early+0x0/0x48) from [<c033bc24>] (setup_arch+0x69c/0x79c) [<c033b588>] (setup_arch+0x0/0x79c) from [<c0338574>] (start_kernel+0x7c/0x2f4) [<c03384f8>] (start_kernel+0x0/0x2f4) from [<10008040>] (0x10008040) r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2) Fix this by adding omap1_clk_late_init() that only reprograms dpll1 if the bootloader rate is less than 60MHz. This also allows removing of the OMAP_CLOCKS_SET_BY_BOOTLOADER option. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP1: clock_data: use runtime cpu / machine checksJanusz Krzysztofik
Otherwise multi-omap1 configurations may set wrong clock speed. Created and tested against l-o master on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-20I2C: i2c-omap: Change device name: i2c_omap -> omap_i2cBenoit Cousson
The convention for omap device naming is omap_XXX. Rename the device and driver name in order to stick to this naming convention. Change device name in clock nodes as well. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ben Dooks <ben-i2c@fluff.org> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha
Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-08-02omap1: omap7xx clocks, mux, serial fixesCory Maccarrone
This change adds in the necessary clocks and mux pins for UART control on omap7xx devices. I also made a change in the serial code to only try and initialize two UARTs in omap_serial_init, as these devices don't have three. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-26OMAP1: clock: some cleanupPaul Walmsley
Convert most of the magic numbers in mach-omap1/clock_data.c to use macros. Clean up a few comments to conform with Documentation/CodingStyle. Mark the current clkops_uart as being OMAP16xx-only, and add some comments to indicate that it does not belong there, for future cleanup. This patch should not cause any functional changes. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP4: clock: Add dummy clock nodes for interface clocksSantosh Shilimkar
On OMAP4 platform the iclk control is completly under hardware control and no software control is available. This difference w.r.t previous OMAP's needs all the common driver accross OMAP's , cpu_is_xxxx() checks. To avoid poulluting the drivers dummy clock nodes are created (The autogeneration script has been updated accordingly). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made OMAP1 dummy_ck common and edited patch to reuse that] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24OMAP clock: drop RATE_FIXED clock flagPaul Walmsley
The RATE_FIXED clock flag is pointless. In the OMAP1 clock code, it simply causes the omap1_clk_round_rate() function to return the current rate of the clock. omap1_clk_round_rate(), however, should never be called for a fixed-rate clock, since none of these clocks have a .round_rate function pointer set in their struct clk records. Similarly, in the OMAP2+ clock code, the RATE_FIXED flag just causes the clock code to emit a warning if the OMAP clock maintainer was foolish enough to add a .round_rate function pointer to a fixed-rate clock. "Doctor, it hurts when I pretend that a fixed-rate clock is rate-changeable." "Then don't pretend that a fixed-rate clock is rate-changeable." It has no functional value. This patch drops the RATE_FIXED clock flag, removing it from all clocks that are so marked. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2010-02-24OMAP clock: drop .id field; ensure each clock has a unique namePaul Walmsley
After the clkdev conversion, the struct clk.id field became superfluous, so, drop it. Bring the clock names closer to the TRMs and ensure they are unique for debugfs. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-26OMAP1 clock: convert armwdt_ck to use the fixed divisor recalc functionPaul Walmsley
The armwdt_ck clock uses a fixed divisor, so it can use the OMAP clock fixed divisor recalculation code, rather than a custom function. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
omap-fixes-for-linus
2010-01-08OMAP1 clock: remove __initdata from struct clk_functions to prevent crashCory Maccarrone
Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP1 clock: Add missing clocks for OMAP 7xxCory Maccarrone
This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08omap1: Add 7xx clocks and pin muxes for SPICory Maccarrone
Commit 35c9049b27040d09461bc90928ad770be7ddf661 added drivers/spi/omap_spi_100k.c. This patch add the related clocks and pin muxing entries to make the driver work on omap7xx platforms. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: I2C mux and clocks for omap7xxCory Maccarrone
This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley
The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>