summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-omap4panda.c
AgeCommit message (Collapse)Author
2013-05-30ARM: OMAP2+: Remove board-omap4panda.cTony Lindgren
We can now boot with device tree. If you don't want to update u-boot, you can boot with appended DTB with the following instructions: 1. Make sure you have the appended DTB support in .config CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y 2. Build the zImage $ ARCH=arm CROSS_COMPILE=... make zImage 3. Build the device tree blobs $ ARCH=arm CROSS_COMPILE=... make dtbs 4. Append the correct panda dtb to zImage Depending on your hardware it's omap4-panda.dtb, omap4-panda-a4.dtb or omap4-panda-es.dtb. $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-panda-es.dtb > /tmp/appended 5. Use mkimage to produce the appended device tree uImage $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \ -n "Linux" -d /tmp/appended /tmp/uImage Signed-off-by: Tony Lindgren <tony@atomide.com
2013-05-06ARM: OMAP4: change the device names in usb_bind_phyKishon Vijay Abraham I
After the device names are created using PLATFORM_DEVID_AUTO, the old device names given in usb_bind_phy are no longer valid causing the musb controller not to get the phy reference. Updated the usb_bind_phy with the new device names to get MUSB functional in omap4 panda. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02ARM: OMAP2+: omap4panda: Adapt to ehci-omap changesRoger Quadros
Use usbhs_init_phys() to register the PHY's VCC and RESET regulators and the NOP PHY device. Get rid of managing the PHY clock as it will be done by the PHY driver. For that to work we create a clock alias that links the PHY clock name to the PHY device name. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-19Merge tag 'omap-for-v3.9/usb-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc These changes contain the OMAP USB related platform data changes that were dropped from linux next because of the merge conflicts as requested by me and Olof. The reason was that at this point we really should be able to do the arch/arm related changes separately from driver changes to avoid dependencies between branches. These patches were initially part of the USB related MFD patches. Based on our comments, Roger Quadros quickly reworked these patches into a shared branch between ARM SoC tree and the MFD tree, then separate patches for the OMAP platform data and MFD driver. Note that this branch will conflict with c1d1cd597fc7 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code"). Please see http://lkml.org/lkml/2013/2/11/16 for the merge resolution. [arnd - resolved the merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-14ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)Roger Quadros
Let's have a single platform data structure for the OMAP's High-Speed USB host subsystem instead of having 3 separate ones i.e. one for board data, one for USB Host (UHH) module and one for USB-TLL module. This makes the code much simpler and avoids creating multiple copies of platform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-06ARM: OMAP: USB: Add phy binding informationKishon Vijay Abraham I
This is w.r.t the changes in PHY library to support adding and getting multiple PHYs of the same type. In the new design, the binding information between the PHY and the USB controller should be specified in the platform specific initialization code. So it's been done here for OMAP platforms. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04Merge tag 'v3.8-rc6' into next/socOlof Johansson
Linux 3.8-rc6
2013-01-27Merge tag 'v3.8-rc5' into next/cleanupOlof Johansson
Linux 3.8-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-21ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transportLuciano Coelho
Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-14Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-12irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring
Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
2013-01-12ARM: remove mach .handle_irq for GIC usersRob Herring
Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-12Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC board updates from Olof Johansson: "This branch contains a set of various board updates for ARM platforms. A few shmobile platforms that are stale have been removed, some defconfig updates for various boards selecting new features such as pinctrl subsystem support, and various updates enabling peripherals, etc." Fix up conflicts mostly as per Olof. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore ARM: kirkwood: Add Plat'Home OpenBlocks A6 support ARM: Dove: update defconfig ARM: Kirkwood: update defconfig for new boards arm: orion5x: add DT related options in defconfig arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree arm: orion5x: basic Device Tree support arm: orion5x: mechanical defconfig update ARM: kirkwood: Add support for the MPL CEC4 arm: kirkwood: add support for ZyXEL NSA310 ARM: Kirkwood: new board USI Topkick ARM: kirkwood: use gpio-fan DT binding on lsxl ARM: Kirkwood: add Netspace boards to defconfig ARM: kirkwood: DT board setup for Network Space Mini v2 ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space v2 and parents leds: leds-ns2: add device tree binding ARM: Kirkwood: Enable the second I2C bus ARM: mmp: select pinctrl driver ...
2012-11-08ARM: OMAP2+: board files: use SoC-specific system restart functionsPaul Walmsley
Modify the board files to use the SoC-specific system restart functions. At this point it's possible to remove omap_prcm_restart() from mach-omap2/prcm.c. While removing the prototypes for the now-unused restart functions, clean up a few more obsolete prototypes in mach-omap2/clock.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-07OMAP: panda: move display init from board file to dss-common.cTomi Valkeinen
Device tree support for omapdss is still some way in the future. In an effort to get a minimal DSS support for DT enabled kernel on selected OMAP4 boards, we'll go for a temporary solution: We will call the same non-DT omapdss setup code for OMAP4 SDP and Pandaboards from board-generic.c, thus enabling DSS for those boards. This patch moves the display setup code from board-omap4panda.c to dss-common.c. dss-common.c will be called by the board-omap4panda.c when running on non-DT kernel, and by board-generic.c when running on DT enabled kernel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-24Merge branch 'omap-for-v3.8/cleanup-headers-usb' into ↵Tony Lindgren
omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-cm-t35.c arch/arm/mach-omap2/board-igep0020.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-omap2/board-omap3logic.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/board-overo.c arch/arm/mach-omap2/board-rm680.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/twl-common.c arch/arm/mach-omap2/usb-host.c arch/arm/mach-omap2/usb-musb.c
2012-10-24ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>Felipe Balbi
In order to make single zImage work for ARM architecture, we need to make sure we don't depend on private headers. Move USB platform_data to <linux/platform_data/omap-usb.h> and add a minimal drivers/mfd/usb-omap.h. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated for local mfd/usb-omap.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-24ARM: OMAP2+: Introduce local usb.hTony Lindgren
Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: Split plat/mmc.h into local headers and platform_dataTony Lindgren
We need to remove this from plat for ARM common zImage support. Also remove includes not needed by the omap_hsmmc.c driver. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball <cjb@laptop.org> Acked-by: Venkatraman S <svenkatr@ti.com> [tony@atomide.com: fold in removal of unused driver includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-12Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: "This includes: - large updates for OMAP - basic OMAP5 DSS support for DPI and DSI outputs - large cleanups and restructuring - some update to Exynos and da8xx-fb - removal of the pnx4008 driver (arch removed) - various other small patches" Fix up some trivial conflicts (mostly just include line changes, but also some due to the renaming of the deferred work functions by Tejun). * tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits) gbefb: fix compile error video: mark nuc900fb_map_video_memory as __devinit video/mx3fb: set .owner to prevent module unloading while being used video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare drivers/video/exynos/exynos_mipi_dsi.c: fix error return code drivers/video/savage/savagefb_driver.c: fix error return code video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare da8xx-fb: save and restore LCDC context across suspend/resume cycle da8xx-fb: add pm_runtime support video/udlfb: fix line counting in fb_write OMAPDSS: add missing include for string.h OMAPDSS: DISPC: Configure color conversion coefficients for writeback OMAPDSS: DISPC: Add manager like functions for writeback OMAPDSS: DISPC: Configure writeback FIFOs OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup() OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup OMAPDSS: DISPC: Add function to set channel in for writeback OMAPDSS: DISPC: Don't set chroma resampling bit for writeback OMAPDSS: DISPC: Downscale chroma if plane is writeback OMAPDSS: DISPC: Configure input and output sizes for writeback ...
2012-10-09Merge tag 'omap-for-v3.7-rc1/fixes-asoc-regression-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: This branch contains regression fixes for omap4/5 ASoC audio that were caused by the fact that u-boot stopped muxing non essential pins. As omap audio and dmaengine development happens on these platforms, let's make sure they are usable. Of course this should have been fixed earlier and not during the -rc cycle. * tag 'omap-for-v3.7-rc1/fixes-asoc-regression-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs
2012-10-08arm/omap: Replace board_ref_clock with enum valuesVikram Narayanan
Use the enum for board_ref_clock from linux/wl12xx.h Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Cc: linux-omap@vger.kernel.org Reviewed-by: Pankaj Jangra<jangra.pankaj9@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM: OMAP: board-omap4panda: Pin mux configuration for audio needsPeter Ujfalusi
u-boot stopped configuring 'non essential' pins recently. These pins are essential for audio and need to be done to have working audio on the board. Pin Mux configuration for: twl6040 audpwron gpio, McPDM, and McBSP1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-07Merge tag 'soc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
2012-10-04Merge branch 'late/kirkwood' into late/socOlof Johansson
Merge in the late Kirkwood branch with the OMAP late branch for upstream submission. Final contents described in shared tag. Fixup remove/change conflicts in arch/arm/mach-omap2/devices.c and drivers/spi/spi-omap2-mcspi.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-09-24ARM: OMAP4: twl-common: Support for additional devices on i2c1 busPeter Ujfalusi
On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices. Manufacturers can opt to use different codec than twl6040 and also can add audio related IC to the bus (external amplifier for example on SDP4430). Make it possible to add different set of additional devices to i2c1 bus on OMAP4 boards. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated for removal of irqs.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-22ARM: omap: clk: add clk_prepare and clk_unprepareRajendra Nayak
As part of Common Clk Framework (CCF) the clk_enable() operation was split into a clk_prepare() which could sleep, and a clk_enable() which should never sleep. Similarly the clk_disable() was split into clk_disable() and clk_unprepare(). This was needed to handle complex cases where in a clk gate/ungate would require a slow and a fast part to be implemented. None of the clocks below seem to be in the 'complex' clocks category and are just simple clocks which are enabled/disabled through simple register writes. Most of the instances also seem to be called in non-atomic context which means its safe to move all of those from using a clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare(). For some others, mainly the ones handled through the hwmod framework there is a possibility that they get called in either an atomic or a non-atomic context. The way these get handled below work only as long as clk_prepare is implemented as a no-op (which is the case today) since this gets called very early at boot while most subsystems are unavailable. Hence these are marked with a *HACK* comment, which says we need to re-visit these once we start doing something meaningful with clk_prepare/clk_unprepare like doing voltage scaling or something that involves i2c. This is in preparation of OMAP moving to CCF. Based on initial changes from Mike Turquette. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-22Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson
* multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-13ARM: SoC: convert OMAP4 to SMP operationsMarc Zyngier
Convert OMAP4 to use struct smp_operations to provide its SMP and CPU hotplug operations. Tested on both Panda and IGEPv2 (MULTI_OMAP kernel) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren
We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: remove plat/board.h fileIgor Grinberg
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-07OMAPDSS: HDMI: Move GPIO handling to HDMI driverTomi Valkeinen
We currently manage HDMI GPIOs in the board files via platform_enable/disable calls. This won't work with device tree, and in any case the correct place to manage the GPIOs is in the HDMI driver. This patch moves the handling of the GPIOs to the HDMI driver. The GPIO handling is moved to the common hdmi.c file, and this probably needs to be revisited when adding OMAP5 HDMI support to see if the GPIO handling needs to be moved to IP specific files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-07-20mach-omap2: Fix typo in debug message and commentMasanari Iida
Correcting spelling typo in mach-omap2 Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-09ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2Peter Ujfalusi
The sys_nirq2 is used for twl6040, make sure the pin is configured correctly. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-22Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board specific changes from Olof Johansson: "While we generally attempt to get rid of board specific files and replace them with device tree based descriptions, a lot of platforms have not come that far: In shmobile, we add two new board files because their recently started effort to add DT support has not proceeded enough to use it for all of the important hardware. In Kirkwood, we are adding support for new boards with a combination of DT and board file contents in multiple cases. pxa/mmp and imx are extending support for existing board files but not adding new ones." Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}} * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: shmobile: fix smp build ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ...
2012-05-22Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull non-critical arm-soc bug fixes from Olof Johansson: "These bug fixes were not important enough to have them included in the v3.4 release, mostly because they cover harmless warnings or unrealistic configurations. Instead we queue them up to be picked up in the next merge window." Fixed up trivial conflict in arch/arm/mach-omap2/board-omap4panda.c * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: spear6xx: remove board selection options ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionally ARM: OMAP2+: INTC: fix Kconfig option for TI81XX ARM: OMAP2+: remove incorrect irq_chip ack field ARM: OMAP4: Adding ID for OMAP4460 ES1.1 ARM: OMAP4: panda: add statics to remove warnings ARM: OMAP2+: Incorrect Register Offsets in OMAP Mailbox ARM: OMAP: fix trivial warnings for dspbridge arm: davinci: use for_each_set_bit_from ARM: OMAP4: hsmmc: check for null pointer ARM: OMAP1: fix compilation issue in board-sx1.c ARM: disable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA ARM: davinci: da850-evm: fix section mismatch ARM: tegra: add pll_x freq table entry for 750MHz ARM: davinci: mark spi_board_info arguments as const ARM: davinci: fix incorrect pdctl next bit position
2012-05-10Merge tag 'omap-cleanup-dss-for-v3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Clean up for omap DSS board init in preparation for adding DT support. By Tomi Valkeinen via Tomi Valkeinen (1) and Tony Lindgren (1) * tag 'omap-cleanup-dss-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: OMAPDSS: DSI: implement generic DSI pin config OMAPDSS: Taal: move reset gpio handling to taal driver OMAPDSS: TFP410: rename dvi files to tfp410 OMAPDSS: TFP410: rename dvi -> tfp410 OMAP: board-files: remove custom PD GPIO handling for DVI output OMAPDSS: panel-dvi: add PD gpio handling Resolved context conflicts in arch/arm/mach-omap2/board-omap4panda.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09OMAP: omap4panda: Use common configuration for V1V8, V2V1 suppliesPeter Ujfalusi
These supplies going to be needed for the twl6040 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codecRicardo Neri
Add platform device registratation for HDMI audio codec. This is to be able to transmit audio through the HDMI output featured in Pandaboard and PandaboardES boards. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: WiLink platform data for the PandaBoardMircea Gherzan
The "uim" deamon requires sysfs entries that are filled in using this platform data. Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: panda: add statics to remove warningsTomi Valkeinen
Add statics to board-omap4-panda.c's internal functions and data structures to remove sparse warnings: arch/arm/mach-omap2/board-omap4panda.c:234:29: warning: symbol 'omap_panda_wlan_data' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:441:24: warning: symbol 'omap4_panda_dvi_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:451:12: warning: symbol 'omap4_panda_dvi_init' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:512:13: warning: symbol 'omap4_panda_display_init' was not declared. Should it be static? Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09Merge tag 'omap-cleanup-sparse-for-v3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Sparse and cppcheck warning fixes By Paul Walmsley via Paul Walmsley (1) and Tony Lindgren (1) * tag 'omap-cleanup-sparse-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: clean up some cppcheck warnings ARM: OMAP1: board files: deduplicate and clean some NAND-related code ARM: OMAP: USB: remove unnecessary sideways include ARM: OMAP: DMA: use constant array maximum, drop some LCD DMA code ARM: OMAP: OCM RAM: use memset_io() when clearing SRAM ARM: OMAP: fix 'using plain integer as NULL pointer' sparse warnings ARM: OMAP2+: GPMC: resolve type-conversion warning from sparse ARM: OMAP1: OHCI: use platform_data fn ptr to enable OCPI bus ARM: OMAP1: OCPI: move to mach-omap1/ ARM: OMAP: add includes for missing prototypes ARM: OMAP2+: declare file-local functions as static Signed-off-by: Olof Johansson <olof@lixom.net>