summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/rockchip
AgeCommit message (Collapse)Author
2018-09-28arm64: dts: rockchip: enable display nodes on rk3328-rock64Heiko Stuebner
Enable necessary nodes to get output on the hdmi port of the board. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-28arm64: dts: rockchip: add rk3328 display nodesHeiko Stuebner
Add the chain of display nodes from the core display-subsystem through the one vop to the dw-hdmi output. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> changes in v3: - drop reg from hdmi-in-port changes in v2: - remove trailing 0 from vop irq
2018-09-28arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328Heiko Stuebner
The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node to the rk3328 soc devicetree. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com>
2018-09-26arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsiHeiko Stuebner
DSI controllers are also the hosts of their dsi bus and therefore contain nodes describing the attached panels with their reg properties containing the virtual ids. The dsi controller nodes on rk3399 lacked the #address-cells and #size-cells for these subnodes, so add them. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-26arm64: dts: rockchip: Enable SPI NOR flash on Rock64Chen-Yu Tsai
The Pine64 Rock64 board comes with a GigaDevice GD25Q128CSIG or GD25Q127CSIG chip, which is a 128 Mbit SPI NOR flash chip that supports the JEDEC read-ID command. This patch enables the SPI controller and adds a device node for the flash chip using the generic "jedec,spi-nor" comaptible. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-26arm64: dts: rockchip: add initial dts support for Rockpro64Akash Gajjar
Rockpro64 is a rockchip RK3399 based board from pine64.org. This patch adds basic device node support for Rockpro64 board and make it able to bring up. Peripheral Works - Sdcard - USB 2.0, 3.0 - Leds - Ethernet - Debug console Not working: - USB Type-C Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com> Acked-by: Deepak Das <Deepak_Das@mentor.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-24arm64: dts: rockchip: enable dwc2-based otg controller on px30-evbHeiko Stuebner
Enable the newly added controller on the px30 evaluation board. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-24arm64: dts: rockchip: add dwc2 otg controller on px30Heiko Stuebner
Add the node for the dwc2-based otg controller on the px30 soc. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-22arm64: dts: rockchip: Enable SD card detection for Rock960 boardsManivannan Sadhasivam
For proper working of SD cards, let's add the Card Detect GPIO property to the common devicetree for Rock960 family boards. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-22arm64: dts: rockchip: Add support for Rock960 boardManivannan Sadhasivam
Add devicetree support for Rock960 board, one of the Consumer Edition boards of the 96Boards family. This board support utilizes the common Rock960 family board support that includes Ficus 96Board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-22arm64: dts: rockchip: Split out common nodes for Rock960 based boardsManivannan Sadhasivam
Since the same family members of Rock960 boards (Rock960 and Ficus) share the same configuration, split out the common nodes into a common dtsi file for reducing code duplication. The board specific nodes for Ficus boards are then placed in corresponding board DTS file. Below are some of the key differences between both Rock960 and Ficus boards: 1. Different host enable GPIO for USB 2. Different power and reset GPIO for PCI-E 3. No Ethernet port on Rock960 Only the properties which differ between both boards are placed in the board specific dts and the reset of the nodes are placed in common dtsi file. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-22arm64: dts: rockchip: add spdif sound node for rock64Katsuhiro Suzuki
This patch adds sound card node for rock64. Currently we can support S/PDIF only. It seems the lack of codec driver of rk3328 to enable analog audio out. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-22arm64: dts: rockchip: Fix microSD in rk3399 sapphire boardVicente Bergas
The microSD card slot in the Sapphire board is not working because of several issues: 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V and has a GPIO-based enable control. 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in the DTS to just 3.0V because of the vmmc capability. This results in a conflict from the mmc driver requesting an unsupportable voltage range from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the range up to 3.3V. The hw should be able to stand this 0.3V tolerance. See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c. 3.- The card detect signal is non-working. There is a known conflict with jtag, but the workaround in drivers/soc/rockchip/grf.c does not work. Adding the broken-cd attribute to the DTS fixes the issue. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-17arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikouRob Herring
dtc has new checks for I2C buses. Fix the warnings in unit-addresses. arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dtb: Warning (i2c_bus_reg): /i2c@ff3d0000/codec@0a: I2C bus unit address format error, expected "a" Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire boardVicente Bergas
Add the gpio-controlled regulator and add the supply to the otg-port of phy0. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64Katsuhiro Suzuki
This patch fixes pin assign of vcc_host1_5v. This regulator is controlled by USB20_HOST_DRV signal. ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV. GPIO0_D3 pin is for SPDIF_TX_M0. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: add WiFi module support for Firefly-RK3399Shohei Maruyama
This commit adds WiFi module support for the Firefly-RK3399. Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphireVicente Bergas
On the board DVS2 is disabled and not connected, see schematic, page 16. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphireVicente Bergas
The pin is GPIO4-D1 not GPIO1-D1, see schematic, page 15 for reference. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-09-10arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphireVicente Bergas
Fix alphabetical order. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-29arm64: dts: rockchip: add missing vop properties for px30Sandy Huang
Add display ports for display-subsystem and add reset property for vop node. If missing these properties, drm driver can't probe sucessfully. Signed-off-by: Sandy Huang <hjc@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-29arm64: dts: rockchip: Add idle-states to device tree for rk3399Tony Xie
Add idle-states for cpu and cluster sleep states. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-ccLevin Du
In roc-rk3328-cc board, the signal voltage of sdmmc is supplied by the vcc_sdio regulator, which is a mux between 1.8V and 3.3V, controlled by a special output only gpio pin labeled "gpiomut_pmuio_iout", corresponding bit 1 of the syscon GRF_SOC_CON10. This special pin can now be reference as <&grf_gpio 0>, thanks to the gpio-syscon driver, which makes writing regulator-gpio possible. If the signal voltage changes, the io domain needs to change correspondingly. To use this feature, the following options are required in kernel config: - CONFIG_GPIO_SYSCON=y - CONFIG_POWER_AVS=y - CONFIG_ROCKCHIP_IODOMAIN=y Signed-off-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add GRF GPIO controller to rk3328Levin Du
Adding a GRF GPIO controller labled "grf_gpio" to rk3328, currently providing access to the GPIO_MUTE pin, which is manupulated by the GRF_SOC_CON10 register. The GPIO_MUTE pin is referred to as <&grf_gpio 0>. Signed-off-by: Levin Du <djw@t-chip.com.cn> [dropped default-status disabled] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add io-domain to roc-rk3328-ccLevin Du
It is necessary for the io domain setting of the SoC to match the voltage supplied by the regulators. Signed-off-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add PX30 evaluation board devicetreeLiang Chen
This patch add px30-evb.dts for PX30 evaluation board. Tested on PX30 evb. Signed-off-by: Liang Chen <cl@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add core dtsi file for PX30 SoCsLiang Chen
This patch adds core dtsi file for Rockchip PX30 SoCs. Signed-off-by: Liang Chen <cl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-27arm64: dts: rockchip: add support for ROC-RK3399-PC boardLevin Du
ROC-RK3399-PC is a power efficient 4GB LPDDR4 single board computer with USB 3.0 and Gigabit Ethernet in a form factor compatible with the Raspberry Pi. It is based on the Rockchip RK3399 SoC, powered by the Type-C port. The devicetree currently supports peripherals of: - Ethernet - HDMI - SD Card - UART2 debug - Type-C - eMMC USB3 in Type-C port currently only works with normal orientation, not flip one. Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-25arm64: dts: rockchip: add led support for Firefly-RK3399Shohei Maruyama
This commit adds led support for the Firefly-RK3399. The board has two leds, this commit enables them. Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-25arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399Enric Balletbo i Serra
Commit 0fbc47d9e426 ("phy: rockchip-typec: deprecate some DT properties for various register fields.") deprecates some Rockchip Type-C properties. As these are now not needed, remove from the device tree file. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-25arm64: dts: rockchip: add power button support for Firefly-RK3399Shohei Maruyama
This commit adds power button support for the Firefly-RK3399. Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-16arm64: dts: rockchip: drop out-of-tree properties from rk3399-ficus regulatorHeiko Stuebner
The pwm-regulator for vdd_log uses additional unreviewed properties in the vendor kernel, which slipped in with the devicetree. As written, they are unreviewed and unused in all mainline implementations so drop them again. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-16arm64: dts: rockchip: add voltage properties for vcc3v3_pcie on rk3399 ficusEnric Balletbo i Serra
The vcc3v3_pcie regulator supplies 3.3V so add voltage properties for it. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [split off from original patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-16arm64: dts: rockchip: add USB 2.0 and 3.0 support on Ficus boardEnric Balletbo i Serra
The board exposes two types A ports, one is USB 3.0, up to 5.0Gbps and another one is USB 2.0 up to 480Mbps. Enable the USB PHYs and the USB controllers to enable theses devices. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-12arm64: dts: rockchip: add 96boards RK3399 Ficus boardEzequiel Garcia
The RK3399 Ficus board is an Enterprise Edition board manufactured by Vamrs Ltd., based on the Rockchip RK3399 SoC. The board exposes a bunch of nice peripherals, including SATA, HDMI, MIPI CSI, Ethernet, WiFi, and PCIe. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-07arm64: dts: rockchip: corrected uart1 clock-names for rk3328Huibin Hong
Corrected the uart clock-names or the uart driver might fail. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-07arm64: dts: rockchip: add Google BobHeiko Stuebner
After Kevin, the second chromebook-incarnation of the Gru series is Bob. This materializes as the Asus Chromebook Flip C101PA, whose formfactor is quite similar to Minnie from the Veyron series. Add the devicetree file and binding update for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-07arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebookHeiko Stuebner
Bob needs the same backlight and core edp settings, so move these nodes to the shared dtsi that both will use as a base. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-07arm64: dts: rockchip: move Chromebook-specific Gru-parts to a separate fileHeiko Stuebner
Similar to rk3288-Veyron before, the Gru-series does contain Chromebook (aka clamshell laptops) and non-Chromebook devices. And while the two Chromebook devices Kevin and Bob are quite similar, Scarlet the tablet- device is quite different in its design. Therefore move the Chromebook parts into a gru-chromebook dtsi file to make sharing easier. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-07arm64: dts: rockchip: add phandles to some nodes on rk3399-gruHeiko Stuebner
Some nodes will need to be refined on a per board level, so add phandles to them to reference them later. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-03arm64: dts: rockchip: add some common pin-settings to rk3399Randy Li
Those pins would be used by many boards. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-20arm64: dts: rockchip: generalize rk3399 #sound-dai-cellsHeiko Stuebner
The soc spdif and i2s controllers always only have one compontent, so always require #sound-dai-cells to be 0. Therefore there is no need to duplicate this property in individual boards. So move them to rk3399.dtsi. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-20arm64: dts: rockchip: Add missing cooling device properties for CPUsViresh Kumar
The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Do minor rearrangement as well to keep ordering consistent. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-20arm64: dts: rockchip: enable hdmi sound on rk3399-sapphireVicente Bergas
Simply enable the hdmi-sound simple-audio-card on the sapphire board. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-20arm64: dts: rockchip: connect hdmi sound in rk3399Vicente Bergas
Everything is in place and working, it only needed to be wired up. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-17arm64: dts: rockchip: use SPDX-License-IdentifierKlaus Goger
Update all 64bit rockchip devicetree files to use SPDX-License-Identifiers. All devicetrees claim to be either GPL or X11 while the actual license text is MIT. Therefore we use MIT for the SPDX tag as X11 is clearly wrong. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Brian Norris <briannorris@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-03arm64: dts: rockchip: enable hdmi on rk3399-puma-haikouJakob Unterwurzacher
The Puma-haikou combo supports hdmi output, so enable the hdmi controller and vop controllers on it. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: linux-rockchip@lists.infradead.org Cc: Heiko Stuebner <heiko@sntech.de> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-03arm64: dts: rockchip: use canonical compatible for touchpad/touchscreen on ↵Dmitry Torokhov
gru-kevin "atmel,atmel_mxt_tp" and "atmel,atmel_mxt_ts" are ChromeOS inventions, let's replace them with canonical compatible string "atmel,maxtouch". Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16arm64: dts: rockchip: add clocks in iommu nodesJeffy Chen
Add clocks in iommu nodes, since we are going to control clocks in rockchip iommu driver. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16arm64: dts: rockchip: add usb3-phy otg-port support for rk3399Enric Balletbo i Serra
Add the usb3 phyter for the USB3.0 OTG controller. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 21:45:01 +0000