| Age | Commit message (Collapse) | Author |
|---|
|
Having a per-vcpu virtual offset is a pain. It needs to be synchronized
on each update, and expands badly to a setup where different timers can
have different offsets, or have composite offsets (as with NV).
So let's start by replacing the use of the CNTVOFF_EL2 shadow register
(which we want to reclaim for NV anyway), and make the virtual timer
carry a pointer to a VM-wide offset.
This simplifies the code significantly. It also addresses two terrible bugs:
- The use of CNTVOFF_EL2 leads to some nice offset corruption
when the sysreg gets reset, as reported by Joey.
- The kvm mutex is taken from a vcpu ioctl, which goes against
the locking rules...
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230224173915.GA17407@e124191.cambridge.arm.com
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230224191640.3396734-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- In copy_highpage(), only reset the tag of the destination pointer if
KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
with KASAN_SW_TAGS (which relies on top-byte-ignore).
- Remove warning if SME is detected without SVE, the kernel can cope
with such configuration (though none in the field currently).
- In cfi_handler(), pass the ESR_EL1 value to die() for consistency
with other die() callers.
- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
manipulation from the generic vmemmap_remap_pte() does not follow the
required ARM break-before-make sequence (clear the pte, flush the
TLBs, set the new pte). It may be re-enabled once this sequence is
sorted.
- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
and conduit checks fail.
- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
-falign-functions=N with -Os.
- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
randomisation would actually take place.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
arm64: acpi: Fix possible memory leak of ffh_ctxt
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
arm64: pass ESR_ELx to die() of cfi_handler
arm64/fpsimd: Remove warning for SME without SVE
arm64: Reset KASAN tag in copy_highpage with HW tags only
|
|
Our virtual KASLR displacement is a randomly chosen multiple of
2 MiB plus an offset that is equal to the physical placement modulo 2
MiB. This arrangement ensures that we can always use 2 MiB block
mappings (or contiguous PTE mappings for 16k or 64k pages) to map the
kernel.
This means that a KASLR offset of less than 2 MiB is simply the product
of this physical displacement, and no randomization has actually taken
place. Currently, we use 'kaslr_offset() > 0' to decide whether or not
randomization has occurred, and so we misidentify this case.
If the kernel image placement is not randomized, modules are allocated
from a dedicated region below the kernel mapping, which is only used for
modules and not for other vmalloc() or vmap() calls.
When randomization is enabled, the kernel image is vmap()'ed randomly
inside the vmalloc region, and modules are allocated in the vicinity of
this mapping to ensure that relative references are always in range.
However, unlike the dedicated module region below the vmalloc region,
this region is not reserved exclusively for modules, and so ordinary
vmalloc() calls may end up overlapping with it. This should rarely
happen, given that vmalloc allocates bottom up, although it cannot be
ruled out entirely.
The misidentified case results in a placement of the kernel image within
2 MiB of its default address. However, the logic that randomizes the
module region is still invoked, and this could result in the module
region overlapping with the start of the vmalloc region, instead of
using the dedicated region below it. If this happens, a single large
vmalloc() or vmap() call will use up the entire region, and leave no
space for loading modules after that.
Since commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred'
offset with alignment check"), this is much more likely to occur on
systems that boot via EFI but lack an implementation of the EFI RNG
protocol, as in that case, the EFI stub will decide to leave the image
where it found it, and the EFI firmware uses 64k alignment only.
Fix this, by correctly identifying the case where the virtual
displacement is a result of the physical displacement only.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230223204101.1500373-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
|
|
Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by kworker/u320:0/9:
#0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
Preemption disabled at:
efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1
Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
Workqueue: efi_rts_wq efi_call_rts
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
show_stack (arch/arm64/kernel/stacktrace.c:165)
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
dump_stack (lib/dump_stack.c:114)
__might_resched (kernel/sched/core.c:10134)
rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
[...]
This seems to come from commit ff7a167961d1 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
\-efi_call_virt_pointer()
\-arch_efi_call_virt_setup()
Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.
[ardb: The EFI runtime services are called with a different set of
translation tables, and are permitted to use the SIMD registers.
The context switch code preserves/restores neither, and so EFI
calls must be made with preemption disabled, rather than only
disabling migration.]
Fixes: ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
* kvm-arm64/nv-prefix:
: Preamble to NV support, courtesy of Marc Zyngier.
:
: This brings in a set of prerequisite patches for supporting nested
: virtualization in KVM/arm64. Of course, there is a long way to go until
: NV is actually enabled in KVM.
:
: - Introduce cpucap / vCPU feature flag to pivot the NV code on
:
: - Add support for EL2 vCPU register state
:
: - Basic nested exception handling
:
: - Hide unsupported features from the ID registers for NV-capable VMs
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
arm64: Add ARM64_HAS_NESTED_VIRT cpufeature
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Convert CPACR_EL1_TTA to the new, generated system register
: definitions.
:
: - Serialize toggling CPACR_EL1.SMEN to avoid unexpected exceptions when
: accessing SVCR in the host.
:
: - Avoid quiescing the guest if a vCPU accesses its own redistributor's
: SGIs/PPIs, eliminating the need to IPI. Largely an optimization for
: nested virtualization, as the L1 accesses the affected registers
: rather often.
:
: - Conversion to kstrtobool()
:
: - Common definition of INVALID_GPA across architectures
:
: - Enable CONFIG_USERFAULTFD for CI runs of KVM selftests
KVM: arm64: Fix non-kerneldoc comments
KVM: selftests: Enable USERFAULTFD
KVM: selftests: Remove redundant setbuf()
arm64/sysreg: clean up some inconsistent indenting
KVM: MMU: Make the definition of 'INVALID_GPA' common
KVM: arm64: vgic-v3: Use kstrtobool() instead of strtobool()
KVM: arm64: vgic-v3: Limit IPI-ing when accessing GICR_{C,S}ACTIVER0
KVM: arm64: Synchronize SMEN on vcpu schedule out
KVM: arm64: Kill CPACR_EL1_TTA definition
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-relay-fixes:
: Fixes for CPU on/resume with pKVM, courtesy Quentin Perret.
:
: A consequence of deprivileging the host is that pKVM relays PSCI calls
: on behalf of the host. pKVM's CPU initialization failed to fully
: initialize the CPU's EL2 state, which notably led to unexpected SVE
: traps resulting in a hyp panic.
:
: The issue is addressed by reusing parts of __finalise_el2 to restore CPU
: state in the PSCI relay.
KVM: arm64: Finalise EL2 state from pKVM PSCI relay
KVM: arm64: Use sanitized values in __check_override in nVHE
KVM: arm64: Introduce finalise_el2_state macro
KVM: arm64: Provide sanitized SYS_ID_AA64SMFR0_EL1 to nVHE
|
|
* kvm-arm64/parallel-access-faults:
: Parallel stage-2 access fault handling
:
: The parallel faults changes that went in to 6.2 covered most stage-2
: aborts, with the exception of stage-2 access faults. Building on top of
: the new infrastructure, this series adds support for handling access
: faults (i.e. updating the access flag) in parallel.
:
: This is expected to provide a performance uplift for cores that do not
: implement FEAT_HAFDBS, such as those from the fruit company.
KVM: arm64: Condition HW AF updates on config option
KVM: arm64: Handle access faults behind the read lock
KVM: arm64: Don't serialize if the access flag isn't set
KVM: arm64: Return EAGAIN for invalid PTE in attr walker
KVM: arm64: Ignore EAGAIN for walks outside of a fault
KVM: arm64: Use KVM's pte type/helpers in handle_access_fault()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/virtual-cache-geometry:
: Virtualized cache geometry for KVM guests, courtesy of Akihiko Odaki.
:
: KVM/arm64 has always exposed the host cache geometry directly to the
: guest, even though non-secure software should never perform CMOs by
: Set/Way. This was slightly wrong, as the cache geometry was derived from
: the PE on which the vCPU thread was running and not a sanitized value.
:
: All together this leads to issues migrating VMs on heterogeneous
: systems, as the cache geometry saved/restored could be inconsistent.
:
: KVM/arm64 now presents 1 level of cache with 1 set and 1 way. The cache
: geometry is entirely controlled by userspace, such that migrations from
: older kernels continue to work.
KVM: arm64: Mark some VM-scoped allocations as __GFP_ACCOUNT
KVM: arm64: Normalize cache configuration
KVM: arm64: Mask FEAT_CCIDX
KVM: arm64: Always set HCR_TID2
arm64/cache: Move CLIDR macro definitions
arm64/sysreg: Add CCSIDR2_EL1
arm64/sysreg: Convert CCSIDR_EL1 to automatic generation
arm64: Allow the definition of UNKNOWN system register fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Merge the SME2 branch to fix up a rather annoying conflict due to the
EL2 finalization refactor.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Merge the kvm_init() + hardware enable rework to avoid conflicts
with kvmarm.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
So far we were flushing almost the entire universe whenever a VM would
load/unload the SCTLR_EL1 and the two versions of that register had
different MMU enabled settings. This turned out to be so slow that it
prevented forward progress for a nested VM, because a scheduler timer
tick interrupt would always be pending when we reached the nested VM.
To avoid this problem, we consider the SCTLR_EL2 when evaluating if
caches are on or off when entering virtual EL2 (because this is the
value that we end up shadowing onto the hardware EL1 register).
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-19-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
As there is a number of features that we either can't support,
or don't want to support right away with NV, let's add some
basic filtering so that we don't advertize silly things to the
EL2 guest.
Whilst we are at it, advertize FEAT_TTL as well as FEAT_GTG, which
the NV implementation will implement.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-18-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We can no longer blindly copy the VCPU's PSTATE into SPSR_EL2 and return
to the guest and vice versa when taking an exception to the hypervisor,
because we emulate virtual EL2 in EL1 and therefore have to translate
the mode field from EL2 to EL1 and vice versa.
This requires keeping track of the state we enter the guest, for which
we transiently use a dedicated flag.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When a guest hypervisor running virtual EL2 in EL1 executes an ERET
instruction, we will have set HCR_EL2.NV which traps ERET to EL2, so
that we can emulate the exception return in software.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Support injecting exceptions and performing exception returns to and
from virtual EL2. This must be done entirely in software except when
taking an exception from vEL0 to vEL2 when the virtual HCR_EL2.{E2H,TGE}
== {1,1} (a VHE guest hypervisor).
[maz: switch to common exception injection framework, illegal exeption
return handling]
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
ARM v8.3 introduces a new bit in the HCR_EL2, which is the NV bit. When
this bit is set, accessing EL2 registers in EL1 traps to EL2. In
addition, executing the following instructions in EL1 will trap to EL2:
tlbi, at, eret, and msr/mrs instructions to access SP_EL1. Most of the
instructions that trap to EL2 with the NV bit were undef at EL1 prior to
ARM v8.3. The only instruction that was not undef is eret.
This patch sets up a handler for EL2 registers and SP_EL1 register
accesses at EL1. The host hypervisor keeps those register values in
memory, and will emulate their behavior.
This patch doesn't set the NV bit yet. It will be set in a later patch
once nested virtualization support is completed.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
[maz: EL2_REG() macros]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When running a nested hypervisor we commonly have to figure out if
the VCPU mode is running in the context of a guest hypervisor or guest
guest, or just a normal guest.
Add convenient primitives for this.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add the minimal set of EL2 system registers to the vcpu context.
Nothing uses them just yet.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Introduce the feature bit and a primitive that checks if the feature is
set behind a static key check based on the cpus_have_const_cap check.
Checking vcpu_has_nv() on systems without nested virt enabled
should have negligible overhead.
We don't yet allow userspace to actually set this feature.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a new ARM64_HAS_NESTED_VIRT feature to indicate that the
CPU has the ARMv8.3 nested virtualization capability, together
with the 'kvm-arm.mode=nested' command line option.
This will be used to support nested virtualization in KVM.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: moved the command-line option to kvm-arm.mode]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
'for-next/misc', 'for-next/sme2', 'for-next/tpidr2', 'for-next/scs', 'for-next/compat-hwcap', 'for-next/ftrace', 'for-next/efi-boot-mmu-on', 'for-next/ptrauth' and 'for-next/pseudo-nmi', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
perf: arm_spe: Use new PMSIDR_EL1 register enums
perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
arm64/sysreg: Convert SPE registers to automatic generation
arm64: Drop SYS_ from SPE register defines
perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
perf/marvell: Add ACPI support to TAD uncore driver
perf/marvell: Add ACPI support to DDR uncore driver
perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability
* for-next/sysreg:
: arm64 sysreg and cpufeature fixes/updates
KVM: arm64: Use symbolic definition for ISR_EL1.A
arm64/sysreg: Add definition of ISR_EL1
arm64/sysreg: Add definition for ICC_NMIAR1_EL1
arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
arm64/sysreg: Fix errors in 32 bit enumeration values
arm64/cpufeature: Fix field sign for DIT hwcap detection
* for-next/sme:
: SME-related updates
arm64/sme: Optimise SME exit on syscall entry
arm64/sme: Don't use streaming mode to probe the maximum SME VL
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
* for-next/kselftest: (23 commits)
: arm64 kselftest fixes and improvements
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
kselftest/arm64: Fix enumeration of systems without 128 bit SME
kselftest/arm64: Don't require FA64 for streaming SVE tests
kselftest/arm64: Limit the maximum VL we try to set via ptrace
kselftest/arm64: Correct buffer size for SME ZA storage
kselftest/arm64: Remove the local NUM_VL definition
kselftest/arm64: Verify simultaneous SSVE and ZA context generation
kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
kselftest/arm64: Remove spurious comment from MTE test Makefile
kselftest/arm64: Support build of MTE tests with clang
kselftest/arm64: Initialise current at build time in signal tests
kselftest/arm64: Don't pass headers to the compiler as source
kselftest/arm64: Remove redundant _start labels from FP tests
kselftest/arm64: Fix .pushsection for strings in FP tests
kselftest/arm64: Run BTI selftests on systems without BTI
kselftest/arm64: Fix test numbering when skipping tests
kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
kselftest/arm64: Only enumerate power of two VLs in syscall-abi
...
* for-next/misc:
: Miscellaneous arm64 updates
arm64/mm: Intercept pfn changes in set_pte_at()
Documentation: arm64: correct spelling
arm64: traps: attempt to dump all instructions
arm64: Apply dynamic shadow call stack patching in two passes
arm64: el2_setup.h: fix spelling typo in comments
arm64: Kconfig: fix spelling
arm64: cpufeature: Use kstrtobool() instead of strtobool()
arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
arm64: make ARCH_FORCE_MAX_ORDER selectable
* for-next/sme2: (23 commits)
: Support for arm64 SME 2 and 2.1
arm64/sme: Fix __finalise_el2 SMEver check
kselftest/arm64: Remove redundant _start labels from zt-test
kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
kselftest/arm64: Add coverage of the ZT ptrace regset
kselftest/arm64: Add SME2 coverage to syscall-abi
kselftest/arm64: Add test coverage for ZT register signal frames
kselftest/arm64: Teach the generic signal context validation about ZT
kselftest/arm64: Enumerate SME2 in the signal test utility code
kselftest/arm64: Cover ZT in the FP stress test
kselftest/arm64: Add a stress test program for ZT0
arm64/sme: Add hwcaps for SME 2 and 2.1 features
arm64/sme: Implement ZT0 ptrace support
arm64/sme: Implement signal handling for ZT
arm64/sme: Implement context switching for ZT0
arm64/sme: Provide storage for ZT0
arm64/sme: Add basic enumeration for SME2
arm64/sme: Enable host kernel to access ZT0
arm64/sme: Manually encode ZT0 load and store instructions
arm64/esr: Document ISS for ZT0 being disabled
arm64/sme: Document SME 2 and SME 2.1 ABI
...
* for-next/tpidr2:
: Include TPIDR2 in the signal context
kselftest/arm64: Add test case for TPIDR2 signal frame records
kselftest/arm64: Add TPIDR2 to the set of known signal context records
arm64/signal: Include TPIDR2 in the signal context
arm64/sme: Document ABI for TPIDR2 signal information
* for-next/scs:
: arm64: harden shadow call stack pointer handling
arm64: Stash shadow stack pointer in the task struct on interrupt
arm64: Always load shadow stack pointer directly from the task struct
* for-next/compat-hwcap:
: arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
arm64: Add compat hwcap SSBS
arm64: Add compat hwcap SB
arm64: Add compat hwcap I8MM
arm64: Add compat hwcap ASIMDBF16
arm64: Add compat hwcap ASIMDFHM
arm64: Add compat hwcap ASIMDDP
arm64: Add compat hwcap FPHP and ASIMDHP
* for-next/ftrace:
: Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
arm64: avoid executing padding bytes during kexec / hibernation
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
arm64: ftrace: Update stale comment
arm64: patching: Add aarch64_insn_write_literal_u64()
arm64: insn: Add helpers for BTI
arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
ACPI: Don't build ACPICA with '-Os'
Compiler attributes: GCC cold function alignment workarounds
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
* for-next/efi-boot-mmu-on:
: Permit arm64 EFI boot with MMU and caches on
arm64: kprobes: Drop ID map text from kprobes blacklist
arm64: head: Switch endianness before populating the ID map
efi: arm64: enter with MMU and caches enabled
arm64: head: Clean the ID map and the HYP text to the PoC if needed
arm64: head: avoid cache invalidation when entering with the MMU on
arm64: head: record the MMU state at primary entry
arm64: kernel: move identity map out of .text mapping
arm64: head: Move all finalise_el2 calls to after __enable_mmu
* for-next/ptrauth:
: arm64 pointer authentication cleanup
arm64: pauth: don't sign leaf functions
arm64: unify asm-arch manipulation
* for-next/pseudo-nmi:
: Pseudo-NMI code generation optimisations
arm64: irqflags: use alternative branches for pseudo-NMI logic
arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
|
|
When building with CONFIG_UBSAN_TRAP=y on arm64, Clang encodes the UBSAN
check (handler) type in the esr. Extract this and actually report these
traps as coming from the specific UBSAN check that tripped.
Before:
Internal error: BRK handler: 00000000f20003e8 [#1] PREEMPT SMP
After:
Internal error: UBSAN: shift out of bounds: 00000000f2005514 [#1] PREEMPT SMP
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Replace alloc_zeroed_user_highpage_movable(). The main difference is
returning a folio containing a single page instead of returning the page,
but take the opportunity to rename the function to match other allocation
functions a little better and rewrite the documentation to place more
emphasis on the zeroing rather than the highmem aspect.
Link: https://lkml.kernel.org/r/20230116191813.2145215-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.
Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The nVHE EL2 code has access to sanitized values of certain idregs, so
use them directly from __check_override instead of the *_override
variants.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20230201103755.1398086-4-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Factor out the first half of the finalise_el2 function into a macro to
allow its reuse from the nVHE PSCI relay code. While at it, make the
register allocation parametric for the check_override macros as they are
now more widely exposed.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-3-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We will need a sanitized copy of SYS_ID_AA64SMFR0_EL1 from the nVHE EL2
code shortly, so make sure to provide it with a copy.
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-2-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Due to the way we use alternatives in the irqflags code, even when
CONFIG_ARM64_PSEUDO_NMI=n, we generate unused alternative code for
pseudo-NMI management. This patch reworks the irqflags code to remove
the redundant code when CONFIG_ARM64_PSEUDO_NMI=n, which benefits the
more common case, and will permit further rework of our DAIF management
(e.g. in preparation for ARMv8.8-A's NMI feature).
Prior to this patch a defconfig kernel has hundreds of redundant
instructions to access ICC_PMR_EL1 (which should only need to be
manipulated in setup code), which this patch removes:
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-before-defconfig | grep icc_pmr_el1 | wc -l
| 885
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-after-defconfig | grep icc_pmr_el1 | wc -l
| 5
Those instructions alone account for more than 3KiB of kernel text, and
will be associated with additional alt_instr entries, padding and
branches, etc.
These redundant instructions exist because we use alternative sequences
for to choose between DAIF / PMR management in irqflags.h, and even when
CONFIG_ARM64_PSEUDO_NMI=n, those alternative sequences will generate the
code for PMR management, along with alt_instr entries. We use
alternatives here as this was necessary to ensure that we never
encounter a mismatched local_irq_save() ... local_irq_restore() sequence
in the middle of patching, which was possible to see if we used static
keys to choose between DAIF and PMR management.
Since commit:
21fb26bfb01ffe0d ("arm64: alternatives: add alternative_has_feature_*()")
... we have a mechanism to use alternatives similarly to static keys,
allowing us to write the bulk of the logic in C code while also being
able to rely on all sites being patched in one go, and avoiding a
mismatched mismatched local_irq_save() ... local_irq_restore() sequence
during patching.
This patch rewrites arm64's local_irq_*() functions to use alternative
branches. This allows for the pseudo-NMI code to be entirely elided when
CONFIG_ARM64_PSEUDO_NMI=n, making a defconfig Image 64KiB smaller, and
not affectint the size of an Image with CONFIG_ARM64_PSEUDO_NMI=y:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137473432 Jan 18 11:11 vmlinux-after-defconfig
| -rwxr-xr-x 1 mark mark 137918776 Jan 18 11:15 vmlinux-after-pnmi
| -rwxr-xr-x 1 mark mark 137380152 Jan 18 11:03 vmlinux-before-defconfig
| -rwxr-xr-x 1 mark mark 137523704 Jan 18 11:08 vmlinux-before-pnmi
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38646272 Jan 18 11:11 Image-after-defconfig
| -rw-r--r-- 1 mark mark 38777344 Jan 18 11:14 Image-after-pnmi
| -rw-r--r-- 1 mark mark 38711808 Jan 18 11:03 Image-before-defconfig
| -rw-r--r-- 1 mark mark 38777344 Jan 18 11:08 Image-before-pnmi
Some sensitive code depends on being run with interrupts enabled or with
interrupts disabled, and so when enabling or disabling interrupts we
must ensure that the compiler does not move such code around the actual
enable/disable. Before this patch, that was ensured by the combined asm
volatile blocks having memory clobbers (and any sensitive code either
being asm volatile, or touching memory). This patch consistently uses
explicit barrier() operations before and after the enable/disable, which
allows us to use the usual sysreg accessors (which are asm volatile) to
manipulate the interrupt masks. The use of pmr_sync() is pulled within
this critical section for consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR
value to determine whether to signal an IRQ to a PE, and consequently
after a change to the PMR value, a DSB SY may be required to ensure that
interrupts are signalled to a CPU in finite time. When PMHE == 0b0,
interrupts are always signalled to the relevant PE, and all masking
occurs locally, without requiring a DSB SY.
Since commit:
f226650494c6aa87 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear")
... we handle this dynamically: in most cases a static key is used to
determine whether to issue a DSB SY, but the entry code must read from
ICC_CTLR_EL1 as static keys aren't accessible from plain assembly.
It would be much nicer to use an alternative instruction sequence for
the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the
entry code, and for most other code this will result in simpler code
generation with fewer instructions and fewer branches.
This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is
only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in
use). This allows us to replace the existing users of the
`gic_pmr_sync` static key with alternative sequences which default to a
DSB SY and are relaxed to a NOP when PMHE is not in use.
The entry assembly management of the PMR is slightly restructured to use
a branch (rather than multiple NOPs) when priority masking is not in
use. This is more in keeping with other alternatives in the entry
assembly, and permits the use of a separate alternatives for the
PMHE-dependent DSB SY (and removal of the conditional branch this
currently requires). For consistency I've adjusted both the save and
restore paths.
According to bloat-o-meter, when building defconfig +
CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB:
| add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700)
The resulting vmlinux is ~66KiB smaller, though the resulting Image size
is unchanged due to padding and alignment:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after
| -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after
| -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before
Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on
secondary CPUs. As of this patch this is verified by the cpufeature code
when using GIC priority masking (i.e. when using pseudo-NMIs).
Note that since commit:
7e3a57fa6ca831fa ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements")
... Documentation/arm64/booting.rst specifies:
| - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
| all CPUs the kernel is executing on, and must stay constant
| for the lifetime of the kernel.
... so that should not adversely affect any compliant systems, and as
we'll only check for the absense of PMHE when using pseudo-NMIs, this
will only fire when such mismatch will adversely affect the system.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Subsequent patches will add more GIC-related cpucaps. When we do so, it
would be nice to give them a consistent HAS_GIC_* prefix.
In preparation for doing so, this patch renames the existing
ARM64_HAS_IRQ_PRIO_MASKING cap to ARM64_HAS_GIC_PRIO_MASKING.
The cpucaps file was hand-modified; all other changes were scripted
with:
find . -type f -name '*.[chS]' -print0 | \
xargs -0 sed -i 's/ARM64_HAS_IRQ_PRIO_MASKING/ARM64_HAS_GIC_PRIO_MASKING/'
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Changing pfn on a user page table mapped entry, without first going through
break-before-make (BBM) procedure is unsafe. This just updates set_pte_at()
to intercept such changes, via an updated pgattr_change_is_safe(). This new
check happens via __check_racy_pte_update(), which has now been renamed as
__check_safe_pte_update().
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230130121457.1607675-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
- "evailable" -> "available"
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20230123110639.10473-1-prathubaronia2011@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Ensure that the endianness used for populating the ID map matches the
endianness that the running kernel will be using, as this is no longer
guaranteed now that create_idmap() is invoked before init_kernel_el().
Note that doing so is only safe if the MMU is off, as switching the
endianness with the MMU on results in the active ID map to become
invalid. So also clear the M bit when toggling the EE bit in SCTLR, and
mark the MMU as disabled at boot.
Note that the same issue has resulted in preserve_boot_args() recording
the contents of registers X0 ... X3 in the wrong byte order, although
this is arguably a very minor concern.
Fixes: 32b135a7fafe ("arm64: head: avoid cache invalidation when entering with the MMU on")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230125185910.962733-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Instead of cleaning the entire loaded kernel image to the PoC and
disabling the MMU and caches before branching to the kernel's bare metal
entry point, we can leave the MMU and caches enabled, and rely on EFI's
cacheable 1:1 mapping of all of system RAM (which is mandated by the
spec) to populate the initial page tables.
This removes the need for managing coherency in software, which is
tedious and error prone.
Note that we still need to clean the executable region of the image to
the PoU if this is required for I/D coherency, but only if we actually
decided to move the image in memory, as otherwise, this will have been
taken care of by the loader.
This change affects both the builtin EFI stub as well as the zboot
decompressor, which now carries the entire EFI stub along with the
decompression code and the compressed image.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230111102236.1430401-7-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64.
This allows each ftrace callsite to provide an ftrace_ops to the common
ftrace trampoline, allowing each callsite to invoke distinct tracer
functions without the need to fall back to list processing or to
allocate custom trampolines for each callsite. This significantly speeds
up cases where multiple distinct trace functions are used and callsites
are mostly traced by a single tracer.
The main idea is to place a pointer to the ftrace_ops as a literal at a
fixed offset from the function entry point, which can be recovered by
the common ftrace trampoline. Using a 64-bit literal avoids branch range
limitations, and permits the ops to be swapped atomically without
special considerations that apply to code-patching. In future this will
also allow for the implementation of DYNAMIC_FTRACE_WITH_DIRECT_CALLS
without branch range limitations by using additional fields in struct
ftrace_ops.
As noted in the core patch adding support for
DYNAMIC_FTRACE_WITH_CALL_OPS, this approach allows for directly invoking
ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or
part of a module), without going via ftrace_ops_list_func.
Currently, this approach is not compatible with CLANG_CFI, as the
presence/absence of pre-function NOPs changes the offset of the
pre-function type hash, and there's no existing mechanism to ensure a
consistent offset for instrumented and uninstrumented functions. When
CLANG_CFI is enabled, the existing scheme with a global ops->func
pointer is used, and there should be no functional change. I am
currently working with others to allow the two to work together in
future (though this will liekly require updated compiler support).
I've benchamrked this with the ftrace_ops sample module [1], which is
not currently upstream, but available at:
https://lore.kernel.org/lkml/20230103124912.2948963-1-mark.rutland@arm.com
git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git ftrace-ops-sample-20230109
Using that module I measured the total time taken for 100,000 calls to a
trivial instrumented function, with a number of tracers enabled with
relevant filters (which would apply to the instrumented function) and a
number of tracers enabled with irrelevant filters (which would not apply
to the instrumented function). I tested on an M1 MacBook Pro, running
under a HVF-accelerated QEMU VM (i.e. on real hardware).
Before this patch:
Number of tracers || Total time | Per-call average time (ns)
Relevant | Irrelevant || (ns) | Total | Overhead
=========+============++=============+==============+============
0 | 0 || 94,583 | 0.95 | -
0 | 1 || 93,709 | 0.94 | -
0 | 2 || 93,666 | 0.94 | -
0 | 10 || 93,709 | 0.94 | -
0 | 100 || 93,792 | 0.94 | -
---------+------------++-------------+--------------+------------
1 | 1 || 6,467,833 | 64.68 | 63.73
1 | 2 || 7,509,708 | 75.10 | 74.15
1 | 10 || 23,786,792 | 237.87 | 236.92
1 | 100 || 106,432,500 | 1,064.43 | 1063.38
---------+------------++-------------+--------------+------------
1 | 0 || 1,431,875 | 14.32 | 13.37
2 | 0 || 6,456,334 | 64.56 | 63.62
10 | 0 || 22,717,000 | 227.17 | 226.22
100 | 0 || 103,293,667 | 1032.94 | 1031.99
---------+------------++-------------+--------------+--------------
Note: per-call overhead is estimated relative to the baseline case
with 0 relevant tracers and 0 irrelevant tracers.
After this patch
Number of tracers || Total time | Per-call average time (ns)
Relevant | Irrelevant || (ns) | Total | Overhead
=========+============++=============+==============+============
0 | 0 || 94,541 | 0.95 | -
0 | 1 || 93,666 | 0.94 | -
0 | 2 || 93,709 | 0.94 | -
0 | 10 || 93,667 | 0.94 | -
0 | 100 || 93,792 | 0.94 | -
---------+------------++-------------+--------------+------------
1 | 1 || 281,000 | 2.81 | 1.86
1 | 2 || 281,042 | 2.81 | 1.87
1 | 10 || 280,958 | 2.81 | 1.86
1 | 100 || 281,250 | 2.81 | 1.87
---------+------------++-------------+--------------+------------
1 | 0 || 280,959 | 2.81 | 1.86
2 | 0 || 6,502,708 | 65.03 | 64.08
10 | 0 || 18,681,209 | 186.81 | 185.87
100 | 0 || 103,550,458 | 1,035.50 | 1034.56
---------+------------++-------------+--------------+------------
Note: per-call overhead is estimated relative to the baseline case
with 0 relevant tracers and 0 irrelevant tracers.
As can be seen from the above:
a) Whenever there is a single relevant tracer function associated with a
tracee, the overhead of invoking the tracer is constant, and does not
scale with the number of tracers which are *not* associated with that
tracee.
b) The overhead for a single relevant tracer has dropped to ~1/7 of the
overhead prior to this series (from 13.37ns to 1.86ns). This is
largely due to permitting calls to dynamically-allocated ftrace_ops
without going through ftrace_ops_list_func.
I've run the ftrace selftests from v6.2-rc3, which reports:
| # of passed: 110
| # of failed: 0
| # of unresolved: 3
| # of untested: 0
| # of unsupported: 0
| # of xfailed: 1
| # of undefined(test bug): 0
... where the unresolved entries were the tests for DIRECT functions
(which are not supported), and the checkbashisms selftest (which is
irrelevant here):
| [8] Test ftrace direct functions against tracers [UNRESOLVED]
| [9] Test ftrace direct functions against kprobes [UNRESOLVED]
| [62] Meta-selftest: Checkbashisms [UNRESOLVED]
... with all other tests passing (or failing as expected).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230123134603.1064407-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In subsequent patches we'll need to atomically write to a
naturally-aligned 64-bit literal embedded within the kernel text.
Add a helper for this. For consistency with other text patching code we
use copy_to_kernel_nofault(), which is atomic for naturally-aligned
accesses up to 64-bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230123134603.1064407-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In subsequent patches we'd like to check whether an instruction is a
BTI. In preparation for this, add basic instruction helpers for BTI
instructions.
Per ARM DDI 0487H.a section C6.2.41, BTI is encoded in binary as
follows, MSB to LSB:
1101 0101 000 0011 0010 0100 xx01 1111
Where the `xx` bits encode J/C/JC:
00 : (omitted)
01 : C
10 : J
11 : JC
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230123134603.1064407-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On arm64 we don't align assembly function in the same way as C
functions. This somewhat limits the utility of
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B for testing, and adds noise when
testing that we're correctly aligning functions as will be necessary for
ftrace in subsequent patches.
Follow the example of x86, and align assembly functions in the same way
as C functions. Selecting FUNCTION_ALIGNMENT_4B ensures
CONFIG_FUCTION_ALIGNMENT will be a minimum of 4 bytes, matching the
minimum alignment that __ALIGN and __ALIGN_STR provide prior to this
patch.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel, and looking for misaligned text symbols:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
Before, v6.2-rc3 + fixed __cold + fixed ACPICA:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
323
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
After:
# uname -rm
6.2.0-rc3-00003-g71db61ee3ea1 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
112
Considering the remaining 112 unaligned text symbols:
* 20 are non-function KVM NVHE assembly symbols, which are never
instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __kvm_nvhe | wc -l
20
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __kvm_nvhe
ffffbe6483f73784 t __kvm_nvhe___invalid
ffffbe6483f73788 t __kvm_nvhe___do_hyp_init
ffffbe6483f73ab0 t __kvm_nvhe_reset
ffffbe6483f73b8c T __kvm_nvhe___hyp_idmap_text_end
ffffbe6483f73b8c T __kvm_nvhe___hyp_text_start
ffffbe6483f77864 t __kvm_nvhe___host_enter_restore_full
ffffbe6483f77874 t __kvm_nvhe___host_enter_for_panic
ffffbe6483f778a4 t __kvm_nvhe___host_enter_without_restoring
ffffbe6483f81178 T __kvm_nvhe___guest_exit_panic
ffffbe6483f811c8 T __kvm_nvhe___guest_exit
ffffbe6483f81354 t __kvm_nvhe_abort_guest_exit_start
ffffbe6483f81358 t __kvm_nvhe_abort_guest_exit_end
ffffbe6483f81830 t __kvm_nvhe_wa_epilogue
ffffbe6483f81844 t __kvm_nvhe_el1_trap
ffffbe6483f81864 t __kvm_nvhe_el1_fiq
ffffbe6483f81864 t __kvm_nvhe_el1_irq
ffffbe6483f81884 t __kvm_nvhe_el1_error
ffffbe6483f818a4 t __kvm_nvhe_el2_sync
ffffbe6483f81920 t __kvm_nvhe_el2_error
ffffbe6483f865c8 T __kvm_nvhe___start___kvm_ex_table
* 53 are position-independent functions only used during early boot, which are
built with '-Os', but are never instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __pi | wc -l
53
We *could* drop '-Os' when building these for consistency, but that is
not necessary to ensure that ftrace works correctly.
* The remaining 39 are non-function symbols, and 3 runtime BPF
functions, which are never instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep -v __kvm_nvhe | grep -v __pi | wc -l
39
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep -v __kvm_nvhe | grep -v __pi
ffffbe6482e1009c T __irqentry_text_end
ffffbe6482e10358 T __softirqentry_text_end
ffffbe6482e1435c T __entry_text_end
ffffbe6482e825f8 T __guest_exit_panic
ffffbe6482e82648 T __guest_exit
ffffbe6482e827d4 t abort_guest_exit_start
ffffbe6482e827d8 t abort_guest_exit_end
ffffbe6482e83030 t wa_epilogue
ffffbe6482e83044 t el1_trap
ffffbe6482e83064 t el1_fiq
ffffbe6482e83064 t el1_irq
ffffbe6482e83084 t el1_error
ffffbe6482e830a4 t el2_sync
ffffbe6482e83120 t el2_error
ffffbe6482e93550 T sha256_block_neon
ffffbe64830f3ae0 t e843419@01cc_00002a0c_3104
ffffbe648378bd90 t e843419@09b3_0000d7cb_bc4
ffffbe6483bdab20 t e843419@0c66_000116e2_34c8
ffffbe6483f62c94 T __noinstr_text_end
ffffbe6483f70a18 T __sched_text_end
ffffbe6483f70b2c T __cpuidle_text_end
ffffbe6483f722d4 T __lock_text_end
ffffbe6483f73b8c T __hyp_idmap_text_end
ffffbe6483f73b8c T __hyp_text_start
ffffbe6483f865c8 T __start___kvm_ex_table
ffffbe6483f870d0 t init_el1
ffffbe6483f870f8 t init_el2
ffffbe6483f87324 t pen
ffffbe6483f87b48 T __idmap_text_end
ffffbe64848eb010 T __hibernate_exit_text_start
ffffbe64848eb124 T __hibernate_exit_text_end
ffffbe64848eb124 T __relocate_new_kernel_start
ffffbe64848eb260 T __relocate_new_kernel_end
ffffbe648498a8e8 T _einittext
ffffbe648498a8e8 T __exittext_begin
ffffbe6484999d84 T __exittext_end
ffff8000080756b4 t bpf_prog_6deef7357e7b4530 [bpf]
ffff80000808dd78 t bpf_prog_6deef7357e7b4530 [bpf]
ffff80000809d684 t bpf_prog_6deef7357e7b4530 [bpf]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230123134603.1064407-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
|
