summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2020-05-10arm64: bpf: jit JMP_JSET_{X,K}Zi Shen Lim
commit 98397fc547e3f4553553a30ea56fa34d613f0a4c upstream. Original implementation commit e54bcde3d69d ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24arm64: armv8_deprecated: Fix undef_hook mask for thumb setendFredrik Strupe
commit fc2266011accd5aeb8ebc335c381991f20e26e33 upstream. For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0. However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode. An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650. This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions. Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks") Cc: <stable@vger.kernel.org> # 4.0.x- Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Fredrik Strupe <fredrik@strupe.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02arm64: smp: fix smp_send_stop() behaviourCristian Marussi
commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream. On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'Dirk Behme
commit d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream. Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'. Fix this by adding them to the target list. Make sure to match the order of the recipes in the makefile. Cc: stable@vger.kernel.org # v4.3+ Fixes: 0723c05fb75e44 ("arm64: enable more compressed Image formats") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29arm64: dts: juno: Fix UART frequencyAndre Przywara
[ Upstream commit 39a1a8941b27c37f79508426e27a2ec29829d66c ] Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23arm64: dts: agilex/stratix10: fix pmu interrupt numbersDinh Nguyen
[ Upstream commit 210de0e996aee8e360ccc9e173fe7f0a7ed2f695 ] Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()Yunfeng Ye
[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ] In cases like suspend-to-disk and suspend-to-ram, a large number of CPU cores need to be shut down. At present, the CPU hotplug operation is serialised, and the CPU cores can only be shut down one by one. In this process, if PSCI affinity_info() does not return LEVEL_OFF quickly, cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores need to be shut down, it will take a long time. Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So change the wait interval from 10 ms to max 1 ms and use usleep_range() instead of msleep() for more accurate timer. In addition, reducing the time interval will increase the messages output, so remove the "Retry ..." message, instead, track time and output to the the sucessful message. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05arm64: smp: Handle errors reported by the firmwareSuzuki K Poulose
[ Upstream commit f357b3a7e17af7736d67d8267edc1ed3d1dd9391 ] The __cpu_up() routine ignores the errors reported by the firmware for a CPU bringup operation and looks for the error status set by the booting CPU. If the CPU never entered the kernel, we could end up in assuming stale error status, which otherwise would have been set/cleared appropriately by the booting CPU. Reported-by: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28arm64: fix for bad_mode() handler to always result in panicHari Vyas
commit e4ba15debcfd27f60d43da940a58108783bff2a6 upstream. The bad_mode() handler is called if we encounter an uunknown exception, with the expectation that the subsequent call to panic() will halt the system. Unfortunately, if the exception calling bad_mode() is taken from EL0, then the call to die() can end up killing the current user task and calling schedule() instead of falling through to panic(). Remove the die() call altogether, since we really want to bring down the machine in this "impossible" case. Signed-off-by: Hari Vyas <hari.vyas@broadcom.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-25arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess faultPavel Tatashin
commit 94bb804e1e6f0a9a77acf20d7c70ea141c6c821e upstream. A number of our uaccess routines ('__arch_clear_user()' and '__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they encounter an unhandled fault whilst accessing userspace. For CPUs implementing both hardware PAN and UAO, this bug has no effect when both extensions are in use by the kernel. For CPUs implementing hardware PAN but not UAO, this means that a kernel using hardware PAN may execute portions of code with PAN inadvertently disabled, opening us up to potential security vulnerabilities that rely on userspace access from within the kernel which would usually be prevented by this mechanism. In other words, parts of the kernel run the same way as they would on a CPU without PAN implemented/emulated at all. For CPUs not implementing hardware PAN and instead relying on software emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately much worse. Calling 'schedule()' with software PAN disabled means that the next task will execute in the kernel using the page-table and ASID of the previous process even after 'switch_mm()', since the actual hardware switch is deferred until return to userspace. At this point, or if there is a intermediate call to 'uaccess_enable()', the page-table and ASID of the new process are installed. Sadly, due to the changes introduced by KPTI, this is not an atomic operation and there is a very small window (two instructions) where the CPU is configured with the page-table of the old task and the ASID of the new task; a speculative access in this state is disastrous because it would corrupt the TLB entries for the new task with mappings from the previous address space. As Pavel explains: | I was able to reproduce memory corruption problem on Broadcom's SoC | ARMv8-A like this: | | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's | stack is accessed and copied. | | The test program performed the following on every CPU and forking | many processes: | | unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE, | MAP_SHARED | MAP_ANONYMOUS, -1, 0); | map[0] = getpid(); | sched_yield(); | if (map[0] != getpid()) { | fprintf(stderr, "Corruption detected!"); | } | munmap(map, PAGE_SIZE); | | From time to time I was getting map[0] to contain pid for a | different process. Ensure that PAN is re-enabled when returning after an unhandled user fault from our uaccess routines. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Fixes: 338d4f49d6f7 ("arm64: kernel: Add support for Privileged Access Never") Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> [will: rewrote commit message] [will: backport for 4.4.y stable kernels] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-25arm64: dts: amd: Fix SPI bus warningsRob Herring
[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ] dtc has new checks for SPI buses. Fix the warnings in node names. arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' Cc: Brijesh Singh <brijeshkumar.singh@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10ARM: 8481/2: drivers: psci: replace psci firmware callsJens Wiklander
Commit e679660dbb8347f275fe5d83a5dd59c1fb6c8e63 upstream. Switch to use a generic interface for issuing SMC/HVC based on ARM SMC Calling Convention. Removes now the now unused psci-call.S. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10ARM: 8480/2: arm64: add implementation for arm-smcccJens Wiklander
Commit 14457459f9ca2ff8521686168ea179edc3a56a44 upstream. Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17arm64: Rename cpuid_feature field extract routinesSuzuki K Poulose
commit 28c5dcb22f90113dea101b0421bc6971bccb7a74 upstream Now that we have a clear understanding of the sign of a feature, rename the routines to reflect the sign, so that it is not misused. The cpuid_feature_extract_field() now accepts a 'sign' parameter. This makes sure that the arm64_ftr_value() extracts the feature field properly for signed fields. Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-17arm64: capabilities: Handle sign of the feature bitSuzuki K Poulose
commit ff96f7bc7bf6393eef8ff2bde1279715ce13343a usptream Use the appropriate accessor for the feature bit by keeping track of the sign of the feature. This is a pre-requisite for the commit 28c5dcb22f90 upstream, which fixes the arm64_ftr_value() for signed feature fields. Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25arm64: compat: Allow single-byte watchpoints on all addressesWill Deacon
commit 849adec41203ac5837c40c2d7e08490ffdef3c2c upstream. Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses") changed the validation requirements for hardware watchpoints on arch/arm/. Update our compat layer to implement the same relaxation. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-11arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}Will Deacon
commit 147b9635e6347104b91f48ca9dca61eb0fbf2a54 upstream. If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have their architecturally maximum values, which defeats the use of FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous machines. Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively saturate at zero. Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers") Cc: <stable@vger.kernel.org> # 4.4.y only Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-11arm64: cpufeature: Fix CTR_EL0 field definitionsWill Deacon
commit be68a8aaf925aaf35574260bf820bb09d2f9e07f upstream. Our field definitions for CTR_EL0 suffer from a number of problems: - The IDC and DIC fields are missing, which causes us to enable CTR trapping on CPUs with either of these returning non-zero values. - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as FTR_HIGHER_SAFE so that applications can use it to avoid false sharing. - [nit] A RES1 field is described as "RAO" This patch updates the CTR_EL0 field definitions to fix these issues. Cc: <stable@vger.kernel.org> # 4.4.y only Cc: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04crypto: arm64/sha2-ce - correct digest for empty data in finupElena Petrova
commit 6bd934de1e393466b319d29c4427598fda096c57 upstream. The sha256-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: the actual digest, result: initial value of SHA internal state. The error is in sha256_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha2_ce_transform to make the final round. However, in sha256_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 03802f6a80b3a ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04crypto: arm64/sha1-ce - correct digest for empty data in finupElena Petrova
commit 1d4aaf16defa86d2665ae7db0259d6cb07e2091f upstream. The sha1-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: da39a3ee..., result: 67452301... (initial value of SHA internal state). The error is in sha1_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha1_ce_transform to make the final round. However, in sha1_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 07eb54d306f4 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04acpi/arm64: ignore 5.1 FADTs that are reported as 5.0Ard Biesheuvel
[ Upstream commit 2af22f3ec3ca452f1e79b967f634708ff01ced8a ] Some Qualcomm Snapdragon based laptops built to run Microsoft Windows are clearly ACPI 5.1 based, given that that is the first ACPI revision that supports ARM, and introduced the FADT 'arm_boot_flags' field, which has a non-zero field on those systems. So in these cases, infer from the ARM boot flags that the FADT must be 5.1 or later, and treat it as 5.1. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10arm64, vdso: Define vdso_{start,end} as arrayKees Cook
Commit dbbb08f500d6146398b794fdc68a8e811366b451 upstream. Adjust vdso_{start|end} to be char arrays to avoid compile-time analysis that flags "too large" memcmp() calls with CONFIG_FORTIFY_SOURCE. Cc: Jisheng Zhang <jszhang@marvell.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11arm64: cpu_ops: fix a leaked reference by adding missing of_node_putWen Yang
[ Upstream commit 92606ec9285fb84cd9b5943df23f07d741384bfc ] The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm64/kernel/cpu_ops.c:102:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 69, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27arm64: futex: Restore oldval initialization to work around buggy compilersNathan Chancellor
commit ff8acf929014b7f87315588e0daf8597c8aa9d1c upstream. Commit 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: stable@vger.kernel.org Fixes: 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result valueWill Deacon
commit 045afc24124d80c6998d9c770844c67912083506 upstream. Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012. The reasons we appear to get away with this are: 1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications 2. If the result of the atomic operation is zero, the system call behaves correctly 3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all. Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping. Cc: <stable@kernel.org> Fixes: 6170a97460db ("arm64: Atomic operations") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27arm64: debug: Ensure debug handlers check triggering exception levelWill Deacon
commit 6bd288569b50bc89fa5513031086746968f585cb upstream. Debug exception handlers may be called for exceptions generated both by user and kernel code. In many cases, this is checked explicitly, but in other cases things either happen to work by happy accident or they go slightly wrong. For example, executing 'brk #4' from userspace will enter the kprobes code and be ignored, but the instruction will be retried forever in userspace instead of delivering a SIGTRAP. Fix this issue in the most stable-friendly fashion by simply adding explicit checks of the triggering exception level to all of our debug exception handlers. Cc: <stable@vger.kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signalsWill Deacon
commit b9a4b9d084d978f80eb9210727c81804588b42ff upstream. FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by taking a hardware watchpoint. Unfortunately, if a debug handler returns a non-zero value, then we will propagate the UNKNOWN FAR value to userspace via the si_addr field of the SIGTRAP siginfo_t. Instead, let's set si_addr to take on the PC of the faulting instruction, which we have available in the current pt_regs. Cc: <stable@vger.kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03arm64: support keyctl() system call in 32-bit modeEric Biggers
[ Upstream commit 5c2a625937ba49bc691089370638223d310cda9a ] As is the case for a number of other architectures that have a 32-bit compat mode, enable KEYS_COMPAT if both COMPAT and KEYS are enabled. This allows AArch32 programs to use the keyctl() system call when running on an AArch64 kernel. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64: kconfig: drop CONFIG_RTC_LIB dependencyEzequiel Garcia
[ Upstream commit 99a507771fa57238dc7ffe674ae06090333d02c9 ] The rtc-lib dependency is not required, and seems it was just copy-pasted from ARM's Kconfig. If platform requires rtc-lib, they should select it individually. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64: kernel: Include _AC definition in page.hJames Morse
[ Upstream commit 812264550dcba6cdbe84bfac2f27e7d23b5b8733 ] page.h uses '_AC' in the definition of PAGE_SIZE, but doesn't include linux/const.h where this is defined. This produces build warnings when only asm/page.h is included by asm code. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64/kernel: fix incorrect EL0 check in inv_entry macroArd Biesheuvel
[ Upstream commit b660950c60a7278f9d8deb7c32a162031207c758 ] The implementation of macro inv_entry refers to its 'el' argument without the required leading backslash, which results in an undefined symbol 'el' to be passed into the kernel_entry macro rather than the index of the exception level as intended. This undefined symbol strangely enough does not result in build failures, although it is visible in vmlinux: $ nm -n vmlinux |head U el 0000000000000000 A _kernel_flags_le_hi32 0000000000000000 A _kernel_offset_le_hi32 0000000000000000 A _kernel_size_le_hi32 000000000000000a A _kernel_flags_le_lo32 ..... However, it does result in incorrect code being generated for invalid exceptions taken from EL0, since the argument check in kernel_entry assumes EL1 if its argument does not equal '0'. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64: hide __efistub_ aliases from kallsymsArd Biesheuvel
[ Upstream commit 75feee3d9d51775072d3a04f47d4a439a4c4590e ] Commit e8f3010f7326 ("arm64/efi: isolate EFI stub from the kernel proper") isolated the EFI stub code from the kernel proper by prefixing all of its symbols with __efistub_, and selectively allowing access to core kernel symbols from the stub by emitting __efistub_ aliases for functions and variables that the stub can access legally. As an unintended side effect, these aliases are emitted into the kallsyms symbol table, which means they may turn up in backtraces, e.g., ... PC is at __efistub_memset+0x108/0x200 LR is at fixup_init+0x3c/0x48 ... [<ffffff8008328608>] __efistub_memset+0x108/0x200 [<ffffff8008094dcc>] free_initmem+0x2c/0x40 [<ffffff8008645198>] kernel_init+0x20/0xe0 [<ffffff8008085cd0>] ret_from_fork+0x10/0x40 The backtrace in question has nothing to do with the EFI stub, but simply returns one of the several aliases of memset() that have been recorded in the kallsyms table. This is undesirable, since it may suggest to people who are not aware of this that the issue they are seeing is somehow EFI related. So hide the __efistub_ aliases from kallsyms, by emitting them as absolute linker symbols explicitly. The distinction between those and section relative symbols is completely irrelevant to these definitions, and to the final link we are performing when these definitions are being taken into account (the distinction is only relevant to symbols defined inside a section definition when performing a partial link), and so the resulting values are identical to the original ones. Since absolute symbols are ignored by kallsyms, this will result in these values to be omitted from its symbol table. After this patch, the backtrace generated from the same address looks like this: ... PC is at __memset+0x108/0x200 LR is at fixup_init+0x3c/0x48 ... [<ffffff8008328608>] __memset+0x108/0x200 [<ffffff8008094dcc>] free_initmem+0x2c/0x40 [<ffffff8008645198>] kernel_init+0x20/0xe0 [<ffffff8008085cd0>] ret_from_fork+0x10/0x40 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64: fix COMPAT_SHMLBA definition for large pagesYury Norov
[ Upstream commit b9b7aebb42d1b1392f3111de61136bb6cf3aae3f ] ARM glibc uses (4 * __getpagesize()) for SHMLBA, which is correct for 4KB pages and works fine for 64KB pages, but the kernel uses a hardcoded 16KB that is too small for 64KB page based kernels. This changes the definition to what user space sees when using 64KB pages. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03arm64: traps: disable irq in die()Qiao Zhou
commit 6f44a0bacb79a03972c83759711832b382b1b8ac upstream. In current die(), the irq is disabled for __die() handle, not including the possible panic() handling. Since the log in __die() can take several hundreds ms, new irq might come and interrupt current die(). If the process calling die() holds some critical resource, and some other process scheduled later also needs it, then it would deadlock. The first panic will not be executed. So here disable irq for the whole flow of die(). Signed-off-by: Qiao Zhou <qiaozhou@asrmicro.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03arm64: mm: Add trace_irqflags annotations to do_debug_exception()James Morse
commit 6afedcd23cfd7ac56c011069e4a8db37b46e4623 upstream. With CONFIG_PROVE_LOCKING, CONFIG_DEBUG_LOCKDEP and CONFIG_TRACE_IRQFLAGS enabled, lockdep will compare current->hardirqs_enabled with the flags from local_irq_save(). When a debug exception occurs, interrupts are disabled in entry.S, but lockdep isn't told, resulting in: DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) ------------[ cut here ]------------ WARNING: at ../kernel/locking/lockdep.c:3523 Modules linked in: CPU: 3 PID: 1752 Comm: perf Not tainted 4.5.0-rc4+ #2204 Hardware name: ARM Juno development board (r1) (DT) task: ffffffc974868000 ti: ffffffc975f40000 task.ti: ffffffc975f40000 PC is at check_flags.part.35+0x17c/0x184 LR is at check_flags.part.35+0x17c/0x184 pc : [<ffffff80080fc93c>] lr : [<ffffff80080fc93c>] pstate: 600003c5 [...] ---[ end trace 74631f9305ef5020 ]--- Call trace: [<ffffff80080fc93c>] check_flags.part.35+0x17c/0x184 [<ffffff80080ffe30>] lock_acquire+0xa8/0xc4 [<ffffff8008093038>] breakpoint_handler+0x118/0x288 [<ffffff8008082434>] do_debug_exception+0x3c/0xa8 [<ffffff80080854b4>] el1_dbg+0x18/0x6c [<ffffff80081e82f4>] do_filp_open+0x64/0xdc [<ffffff80081d6e60>] do_sys_open+0x140/0x204 [<ffffff80081d6f58>] SyS_openat+0x10/0x18 [<ffffff8008085d30>] el0_svc_naked+0x24/0x28 possible reason: unannotated irqs-off. irq event stamp: 65857 hardirqs last enabled at (65857): [<ffffff80081fb1c0>] lookup_mnt+0xf4/0x1b4 hardirqs last disabled at (65856): [<ffffff80081fb188>] lookup_mnt+0xbc/0x1b4 softirqs last enabled at (65790): [<ffffff80080bdca4>] __do_softirq+0x1f8/0x290 softirqs last disabled at (65757): [<ffffff80080be038>] irq_exit+0x9c/0xd0 This patch adds the annotations to do_debug_exception(), while trying not to call trace_hardirqs_off() if el1_dbg() interrupted a task that already had irqs disabled. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23crypto: arm64/aes-ccm - fix logical bug in AAD MAC handlingArd Biesheuvel
commit eaf46edf6ea89675bd36245369c8de5063a0272c upstream. The NEON MAC calculation routine fails to handle the case correctly where there is some data in the buffer, and the input fills it up exactly. In this case, we enter the loop at the end with w8 == 0, while a negative value is assumed, and so the loop carries on until the increment of the 32-bit counter wraps around, which is quite obviously wrong. So omit the loop altogether in this case, and exit right away. Reported-by: Eric Biggers <ebiggers@kernel.org> Fixes: a3fd82105b9d1 ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...") Cc: stable@vger.kernel.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23arm64: Relax GIC version check during early bootVladimir Murzin
[ Upstream commit 74698f6971f25d045301139413578865fc2bd8f9 ] Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have values other than 0 or 1. At the moment, Linux is quite strict in the way it handles this field at early boot stage (cpufeature is fine) and will refuse to use the system register CPU interface if it doesn't find the value 1. Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3") Reported-by: Chase Conklin <Chase.Conklin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20arm64: ftrace: don't adjust the LR valueMark Rutland
[ Upstream commit 6e803e2e6e367db9a0d6ecae1bd24bb5752011bd ] The core ftrace code requires that when it is handed the PC of an instrumented function, this PC is the address of the instrumented instruction. This is necessary so that the core ftrace code can identify the specific instrumentation site. Since the instrumented function will be a BL, the address of the instrumented function is LR - 4 at entry to the ftrace code. This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers, which acquire the PC of the instrumented function. The mcount_get_lr helper is used to acquire the LR of the instrumented function, whose value does not require this adjustment, and cannot be adjusted to anything meaningful. No adjustment of this value is made on other architectures, including arm. However, arm64 adjusts this value by 4. This patch brings arm64 in line with other architectures and removes the adjustment of the LR value. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06arm64: hyp-stub: Forbid kprobing of the hyp-stubJames Morse
commit 8fac5cbdfe0f01254d9d265c6aa1a95f94f58595 upstream. The hyp-stub is loaded by the kernel's early startup code at EL2 during boot, before KVM takes ownership later. The hyp-stub's text is part of the regular kernel text, meaning it can be kprobed. A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid. Add it to the __hyp_text. Signed-off-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06arm64: mm: remove page_mapping check in __sync_icache_dcacheShaokun Zhang
commit 20c27a4270c775d7ed661491af8ac03264d60fc6 upstream. __sync_icache_dcache unconditionally skips the cache maintenance for anonymous pages, under the assumption that flushing is only required in the presence of D-side aliases [see 7249b79f6b4cc ("arm64: Do not flush the D-cache for anonymous pages")]. Unfortunately, this breaks migration of anonymous pages holding self-modifying code, where userspace cannot be reasonably expected to reissue maintenance instructions in response to a migration. This patch fixes the problem by removing the broken page_mapping(page) check from the cache syncing code, otherwise we may end up fetching and executing stale instructions from the PoU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26arm64: perf: set suppress_bind_attrs flag to trueAnders Roxell
[ Upstream commit 81e9fa8bab381f8b6eb04df7cdf0f71994099bd4 ] The armv8_pmuv3 driver doesn't have a remove function, and when the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, the following Call trace can be seen. [ 1.424287] Failed to register pmu: armv8_pmuv3, reason -17 [ 1.424870] WARNING: CPU: 0 PID: 1 at ../kernel/events/core.c:11771 perf_event_sysfs_init+0x98/0xdc [ 1.425220] Modules linked in: [ 1.425531] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.0-rc7-next-20181012-00003-ge7a97b1ad77b-dirty #35 [ 1.425951] Hardware name: linux,dummy-virt (DT) [ 1.426212] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.426458] pc : perf_event_sysfs_init+0x98/0xdc [ 1.426720] lr : perf_event_sysfs_init+0x98/0xdc [ 1.426908] sp : ffff00000804bd50 [ 1.427077] x29: ffff00000804bd50 x28: ffff00000934e078 [ 1.427429] x27: ffff000009546000 x26: 0000000000000007 [ 1.427757] x25: ffff000009280710 x24: 00000000ffffffef [ 1.428086] x23: ffff000009408000 x22: 0000000000000000 [ 1.428415] x21: ffff000009136008 x20: ffff000009408730 [ 1.428744] x19: ffff80007b20b400 x18: 000000000000000a [ 1.429075] x17: 0000000000000000 x16: 0000000000000000 [ 1.429418] x15: 0000000000000400 x14: 2e79726f74636572 [ 1.429748] x13: 696420656d617320 x12: 656874206e692065 [ 1.430060] x11: 6d616e20656d6173 x10: 2065687420687469 [ 1.430335] x9 : ffff00000804bd50 x8 : 206e6f7361657220 [ 1.430610] x7 : 2c3376756d705f38 x6 : ffff00000954d7ce [ 1.430880] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.431226] x3 : 0000000000000000 x2 : ffffffffffffffff [ 1.431554] x1 : 4d151327adc50b00 x0 : 0000000000000000 [ 1.431868] Call trace: [ 1.432102] perf_event_sysfs_init+0x98/0xdc [ 1.432382] do_one_initcall+0x6c/0x1a8 [ 1.432637] kernel_init_freeable+0x1bc/0x280 [ 1.432905] kernel_init+0x18/0x160 [ 1.433115] ret_from_fork+0x10/0x18 [ 1.433297] ---[ end trace 27fd415390eb9883 ]--- Rework to set suppress_bind_attrs flag to avoid removing the device when CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, since there's no real reason to remove the armv8_pmuv3 driver. Cc: Arnd Bergmann <arnd@arndb.de> Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26arm64: Don't trap host pointer auth use to EL2Mark Rutland
[ Backport of upstream commit b3669b1e1c09890d61109a1a8ece2c5b66804714 ] To allow EL0 (and/or EL1) to use pointer authentication functionality, we must ensure that pointer authentication instructions and accesses to pointer authentication keys are not trapped to EL2. This patch ensures that HCR_EL2 is configured appropriately when the kernel is booted at EL2. For non-VHE kernels we set HCR_EL2.{API,APK}, ensuring that EL1 can access keys and permit EL0 use of instructions. For VHE kernels host EL0 (TGE && E2H) is unaffected by these settings, and it doesn't matter how we configure HCR_EL2.{API,APK}, so we don't bother setting them. This does not enable support for KVM guests, since KVM manages HCR_EL2 itself when running VMs. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Will Deacon <will.deacon@arm.com> [kristina: backport to 4.4.y: adjust context] Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26arm64/kvm: consistently handle host HCR_EL2 flagsMark Rutland
[ Backport of upstream commit 4eaed6aa2c628101246bcabc91b203bfac1193f8 ] In KVM we define the configuration of HCR_EL2 for a VHE HOST in HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the non-VHE host flags, and open-code HCR_RW. Further, in head.S we open-code the flags for VHE and non-VHE configurations. In future, we're going to want to configure more flags for the host, so lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S. We now use mov_q to generate the HCR_EL2 value, as we use when configuring other registers in head.S. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Will Deacon <will.deacon@arm.com> [kristina: backport to 4.4.y: non-VHE only; __deactivate_traps_nvhe in assembly; add #include] Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-01arm64: remove no-op -p linker flagGreg Hackmann
(commit 1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 upstream) Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27arm64: percpu: Initialize ret in the default caseNathan Chancellor
[ Upstream commit b5bb425871186303e6936fa2581521bdd1964a58 ] Clang warns that if the default case is taken, ret will be uninitialized. ./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ ./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs here return ret; ^~~ ./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable 'ret' to silence this warning unsigned long ret, loop; ^ = 0 This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings. Reported-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27arm64: Disable asm-operand-width warning for clangMatthias Kaehlcke
clang raises 'asm-operand-widths' warnings in inline assembly code when the size of an operand is < 64 bits and the operand width is unspecified. Most warnings are raised in macros, i.e. the datatype of the operand may vary. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> nc: I trimmed the original commit message since I'm not a part of CrOS and can't speak on their behalf. To fix these warnings, it requires a fairly intrusive backport of the sysreg conversion that Mark Rutland did in 4.9. I think disabling the warning is smarter, similar to commit d41d0fe374d4 ("turn off -Wattribute-alias") in this tree. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27crypto: arm64/sha - avoid non-standard inline asm tricksArd Biesheuvel
commit f4857f4c2ee9aa4e2aacac1a845352b00197fb57 upstream. Replace the inline asm which exports struct offsets as ELF symbols with proper const variables exposing the same values. This works around an issue with Clang which does not interpret the "i" (or "I") constraints in the same way as GCC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21arm64: dts: stratix10: Correct System Manager register sizeThor Thayer
commit 74121b9aa3cd571ddfff014a9f47db36cae3cda9 upstream. Correct the register size of the System Manager node. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10arm64: Fix potential race with hardware DBM in ptep_set_access_flags()Catalin Marinas
[ Upstream commit 6d332747fa5f0a6843b56b5b129168ba909336d1 ] In a system with DBM (dirty bit management) capable agents there is a possible race between a CPU executing ptep_set_access_flags() (maybe non-DBM capable) and a hardware update of the dirty state (clearing of PTE_RDONLY). The scenario: a) the pte is writable (PTE_WRITE set), clean (PTE_RDONLY set) and old (PTE_AF clear) b) ptep_set_access_flags() is called as a result of a read access and it needs to set the pte to writable, clean and young (PTE_AF set) c) a DBM-capable agent, as a result of a different write access, is marking the entry as young (setting PTE_AF) and dirty (clearing PTE_RDONLY) The current ptep_set_access_flags() implementation would set the PTE_RDONLY bit in the resulting value overriding the DBM update and losing the dirty state. This patch fixes such race by setting PTE_RDONLY to the most permissive (lowest value) of the current entry and the new one. Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-10arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"Miguel Ojeda
[ Upstream commit 13aceef06adfaf93d52e01e28a8bc8a0ad471d83 ] All other uses of "asm goto" go through asm_volatile_goto, which avoids a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto" statements with the asm_volatile_goto macro to avoid issues with older toolchains. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 01:48:06 +0000