summaryrefslogtreecommitdiff
path: root/arch/mips/loongson1
AgeCommit message (Collapse)Author
2014-05-23MIPS: Disable MIPS16/microMIPS crap for platforms not supporting these ASEs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-19MIPS: early_printk: drop __init annotationsAaro Koskinen
We cannot use __init for earlyprintk code or data, since the kernel parameter "keep_bootcon" allows leaving the boot console enabled. Currently MIPS will crash/hang/die if you use keep_bootcon. The patch fixes it at least on Lemote FuLoong mini-PC. Changes for other boards were done based on what I could find with grep... Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: http://patchwork.linux-mips.org/patch/4935/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-11-09MIPS: Loongson1B: Fix a typoKelvin Cheung
Fix a typo in the code. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4434 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: Update stmmac_mdio_bus_dataKelvin Cheung
Update stmmac_mdio_bus_data accordingly due to the upstream change. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4433 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: improve ls1x_serial_setup()Kelvin Cheung
Improve ls1x_serial_setup(). Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4432 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Loongson1B: use common clock infrastructure instead of private APIsKelvin Cheung
Use common clock infrastructure instead of private APIs. 1. Enable COMMON_CLK in the Kconfig. 2. Remove private clock APIs, which are replaced by the code in drivers/clk/clk-ls1x.c. 3. Modify header file for drivers/clk/clk-ls1x.c. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4431 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-10-31USB: EHCI: remove ehci_port_power() routineAlan Stern
This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x.Florian Fainelli
The Loongson 1B EHCI driver does nothing more than what the EHCI platform driver already does, so use the generic implementation. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-01MIPS: Loongson 1: more clk support and add select HAVE_CLKYoichi Yuasa
This fixes a redefinition of clk_*: arch/mips/loongson1/common/clock.c:23:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/loongson1/common/clock.c:41:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here make[3]: *** [arch/mips/loongson1/common/clock.o] Error 1 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Reviewed-by: John Crispin <blogic@openwrt.org> Acked-by: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4143/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-25MIPS: Loongson 1B: Add board supportKelvin Cheung
Adds basic platform devices for Loongson 1B, including serial port, ethernet, USB, RTC and interrupt handler. The Loongson 1B UART is compatible with NS16550A, the Loongson 1B GMAC is built around a Synopsys IP Core. Use normal instead of enhanced descriptors. Thanks to Giuseppe for updating the normal descriptor in stmmac driver. Thanks to Zhao Zhang for implementing the RTC driver. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: zhzhl555@gmail.com Cc: Kelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4133/ Patchwork: https://patchwork.linux-mips.org/patch/4134/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>