summaryrefslogtreecommitdiff
path: root/arch/riscv/include/asm/pgtable-32.h
AgeCommit message (Collapse)Author
2023-10-31RISC-V: Provide pgtable_l5_enabled on rv32Palmer Dabbelt
A few of the other page table level helpers are defined on rv32, but not pgtable_l5_enabled. This adds the definition as a constant and converts pgtable_l4_enabled to a constant as well. Link: https://lore.kernel.org/r/20230830044129.11481-2-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-05-11riscv: add RISC-V Svpbmt extension supportHeiko Stuebner
Svpbmt (the S should be capitalized) is the "Supervisor-mode: page-based memory types" extension that specifies attributes for cacheability, idempotency and ordering. The relevant settings are done in special bits in PTEs: Here is the svpbmt PTE format: | 63 | 62-61 | 60-8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 N MT RSW D A G U X W R V ^ Of the Reserved bits [63:54] in a leaf PTE, the high bit is already allocated (as the N bit), so bits [62:61] are used as the MT (aka MemType) field. This field specifies one of three memory types that are close equivalents (or equivalent in effect) to the three main x86 and ARMv8 memory types - as shown in the following table. RISC-V Encoding & MemType RISC-V Description ---------- ------------------------------------------------ 00 - PMA Normal Cacheable, No change to implied PMA memory type 01 - NC Non-cacheable, idempotent, weakly-ordered Main Memory 10 - IO Non-cacheable, non-idempotent, strongly-ordered I/O memory 11 - Rsvd Reserved for future standard use As the extension will not be present on all implementations, implement a method to handle cpufeatures via alternatives to not incur runtime penalties on cpu variants not supporting specific extensions and patch relevant code parts at runtime. Co-developed-by: Wei Fu <wefu@redhat.com> Signed-off-by: Wei Fu <wefu@redhat.com> Co-developed-by: Liu Shaohua <liush@allwinnertech.com> Signed-off-by: Liu Shaohua <liush@allwinnertech.com> Co-developed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> [moved to use the alternatives mechanism] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Link: https://lore.kernel.org/r/20220511192921.2223629-10-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-05-11riscv: Fix accessing pfn bits in PTEs for non-32bit variantsHeiko Stuebner
On rv32 the PFN part of PTEs is defined to use bits [xlen-1:10] while on rv64 it is defined to use bits [53:10], leaving [63:54] as reserved. With upcoming optional extensions like svpbmt these previously reserved bits will get used so simply right-shifting the PTE to get the PFN won't be enough. So introduce a _PAGE_PFN_MASK constant to mask the correct bits for both rv32 and rv64 before shifting. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Link: https://lore.kernel.org/r/20220511192921.2223629-9-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2020-11-16arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-26RISC-V: Paging and MMUPalmer Dabbelt
This patch contains code to manage the RISC-V MMU, including definitions of the page tables and the page walking code. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>