summaryrefslogtreecommitdiff
path: root/arch/s390/mm
AgeCommit message (Collapse)Author
2022-08-30s390/mm: remove useless hugepage address alignmentGerald Schaefer
The failing address alignment to HPAGE_MASK in do_exception(), for hugetlb faults, was useless from the beginning. With 2 GB hugepage support it became wrong, but w/o further negative impact. Now it could have negative performance impact because it breaks the cacheline optimization for process_huge_page(). Therefore, remove it. Note that we still have failing address alignment by HW to PAGE_SIZE, for all page faults, not just hugetlb faults. So this patch will not fix UFFD_FEATURE_EXACT_ADDRESS for userfaultfd handling. It will just move the failing address for hugetlb faults a bit closer to the real address, at 4K page granularity, similar to normal page faults. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-25s390/mm: do not trigger write fault when vma does not allow VM_WRITEGerald Schaefer
For non-protection pXd_none() page faults in do_dat_exception(), we call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC). In do_exception(), vma->vm_flags is checked against that before calling handle_mm_fault(). Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"), we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that it was a write access. However, the vma flags check is still only checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma does not allow VM_WRITE. Fix this by changing access check in do_exception() to VM_WRITE only, when recognizing write access. Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization") Cc: <stable@vger.kernel.org> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-06Merge tag 's390-5.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Rework copy_oldmem_page() callback to take an iov_iter. This includes a few prerequisite updates and fixes to the oldmem reading code. - Rework cpufeature implementation to allow for various CPU feature indications, which is not only limited to hardware capabilities, but also allows CPU facilities. - Use the cpufeature rework to autoload Ultravisor module when CPU facility 158 is available. - Add ELF note type for encrypted CPU state of a protected virtual CPU. The zgetdump tool from s390-tools package will decrypt the CPU state using a Customer Communication Key and overwrite respective notes to make the data accessible for crash and other debugging tools. - Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto test. - Fix incorrect recovery of kretprobe modified return address in stacktrace. - Switch the NMI handler to use generic irqentry_nmi_enter() and irqentry_nmi_exit() helper functions. - Rework the cryptographic Adjunct Processors (AP) pass-through design to support dynamic changes to the AP matrix of a running guest as well as to implement more of the AP architecture. - Minor boot code cleanups. - Grammar and typo fixes to hmcdrv and tape drivers. * tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) Revert "s390/smp: enforce lowcore protection on CPU restart" Revert "s390/smp: rework absolute lowcore access" Revert "s390/smp,ptdump: add absolute lowcore markers" s390/unwind: fix fgraph return address recovery s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit() s390: add ELF note type for encrypted CPU state of a PV VCPU s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/setup: rearrange absolute lowcore initialization s390/boot: cleanup adjust_to_uv_max() function s390/smp: enforce lowcore protection on CPU restart s390/tape: fix comment typo s390/hmcdrv: fix Kconfig "its" grammar s390/docs: fix warnings for vfio_ap driver doc s390/docs: fix warnings for vfio_ap driver lock usage doc s390/crash: support multi-segment iterators s390/crash: use static swap buffer for copy_to_user_real() s390/crash: move copy_to_user_real() to crash_dump.c s390/zcore: fix race when reading from hardware system area s390/crash: fix incorrect number of bytes to copy to user space ...
2022-08-06Revert "s390/smp: rework absolute lowcore access"Alexander Gordeev
This reverts commit 7d06fed77b7d8fc9f6cc41b4e3f2823d32532ad8. This introduced vmem_mutex locking from vmem_map_4k_page() function called from smp_reinit_ipl_cpu() with interrupts disabled. While it is a pre-SMP early initcall no other CPUs running in parallel nor other code taking vmem_mutex on this boot stage - it still needs to be fixed. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-08-06Revert "s390/smp,ptdump: add absolute lowcore markers"Alexander Gordeev
This reverts commit e409b7f19172a3c154de62de4baf32a2c25a375a. Commit 7d06fed77b7d ("s390/smp: rework absolute lowcore access") introduced mutex lock with interrupts disabled. This commit is a follow-up that needs to be reverted as well. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-08-05Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-08-04Merge tag 'for-linus-6.0-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series fine tuning virtio support for Xen guests, including removal the now again unused "platform_has()" feature. - a fix for host admin triggered reboot of Xen guests - a simple spelling fix * tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: don't require virtio with grants for non-PV guests kernel: remove platform_has() infrastructure virtio: replace restricted mem access flag with callback xen: Fix spelling mistake xen/manage: Use orderly_reboot() to reboot
2022-08-01Merge remote-tracking branch 'kvm/next' into kvm-next-5.20Paolo Bonzini
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID
2022-08-01virtio: replace restricted mem access flag with callbackJuergen Gross
Instead of having a global flag to require restricted memory access for all virtio devices, introduce a callback which can select that requirement on a per-device basis. For convenience add a common function returning always true, which can be used for use cases like SEV. Per default use a callback always returning false. As the callback needs to be set in early init code already, add a virtio anchor which is builtin in case virtio is enabled. Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220622063838.8854-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-07-28s390/smp,ptdump: add absolute lowcore markersAlexander Gordeev
Add "Lowcore Area Start" and "Lowcore Area End" markers that fence pages where absolute lowcore resides. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-07-28s390/smp: rework absolute lowcore accessAlexander Gordeev
Temporary unsetting of the prefix page in memcpy_absolute() routine poses a risk of executing code path with unexpectedly disabled prefix page. This rework avoids the prefix page uninstalling and disabling of normal and machine check interrupts when accessing the absolute zero memory. Although memcpy_absolute() routine can access the whole memory, it is only used to update the absolute zero lowcore. This rework therefore introduces a new mechanism for the absolute zero lowcore access and scraps memcpy_absolute() routine for good. Instead, an area is reserved in the virtual memory that is used for the absolute lowcore access only. That area holds an array of 8KB virtual mappings - one per CPU. Whenever a CPU is brought online, the corresponding item is mapped to the real address of the previously installed prefix page. The absolute zero lowcore access works like this: a CPU calls the new primitive get_abs_lowcore() to obtain its 8KB mapping as a pointer to the struct lowcore. Virtual address references to that pointer get translated to the real addresses of the prefix page, which in turn gets swapped with the absolute zero memory addresses due to prefixing. Once the pointer is not needed it must be released with put_abs_lowcore() primitive: struct lowcore *abs_lc; unsigned long flags; abs_lc = get_abs_lowcore(&flags); abs_lc->... = ...; put_abs_lowcore(abs_lc, flags); To ensure the described mechanism works large segment- and region- table entries must be avoided for the 8KB mappings. Failure to do so results in usage of Region-Frame Absolute Address (RFAA) or Segment-Frame Absolute Address (SFAA) large page fields. In that case absolute addresses would be used to address the prefix page instead of the real ones and the prefixing would get bypassed. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-07-20s390/crash: move copy_to_user_real() to crash_dump.cAlexander Gordeev
Function copy_to_user_real() does not really belong to maccess.c. It is only used for copying oldmem to user space, so let's move it to the friends. Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Link: https://lore.kernel.org/r/e8de968d40202d87caa09aef12e9c67ec23a1c1a.1658206891.git.agordeev@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-07-17s390/mm: enable ARCH_HAS_VM_GET_PAGE_PROTAnshuman Khandual
This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT, which looks up a private and static protection_map[] array. Subsequently all __SXXX and __PXXX macros can be dropped which are no longer needed. Link: https://lkml.kernel.org/r/20220711070600.2378316-19-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13KVM: s390: pv: refactor s390_reset_accClaudio Imbrenda
Refactor s390_reset_acc so that it can be reused in upcoming patches. We don't want to hold all the locks used in a walk_page_range for too long, and the destroy page UVC does take some time to complete. Therefore we quickly gather the pages to destroy, and then destroy them without holding all the locks. The new refactored function optionally allows to return early without completing if a fatal signal is pending (and return and appropriate error code). Two wrappers are provided to call the new function. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-5-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-5-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-13KVM: s390: pv: handle secure storage exceptions for normal guestsClaudio Imbrenda
With upcoming patches, normal guests might touch secure pages. This patch extends the existing exception handler to convert the pages to non secure also when the exception is triggered by a normal guest. This can happen for example when a secure guest reboots; the first stage of a secure guest is non secure, and in general a secure guest can reboot into non-secure mode. If the secure memory of the previous boot has not been cleared up completely yet (which will be allowed to happen in an upcoming patch), a non-secure guest might touch secure memory, which will need to be handled properly. This means that gmap faults must be handled and not cause termination of the process. The handling is the same as userspace accesses, it's enough to translate the gmap address to a user address and then let the normal user fault code handle it. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-4-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-4-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-13KVM: s390: pv: handle secure storage violations for protected guestsClaudio Imbrenda
A secure storage violation is triggered when a protected guest tries to access secure memory that has been mapped erroneously, or that belongs to a different protected guest or to the ultravisor. With upcoming patches, protected guests will be able to trigger secure storage violations in normal operation. This happens for example if a protected guest is rebooted with deferred destroy enabled and the new guest is also protected. When the new protected guest touches pages that have not yet been destroyed, and thus are accounted to the previous protected guest, a secure storage violation is raised. This patch adds handling of secure storage violations for protected guests. This exception is handled by first trying to destroy the page, because it is expected to belong to a defunct protected guest where a destroy should be possible. Note that a secure page can only be destroyed if its protected VM does not have any CPUs, which only happens when the protected VM is being terminated. If that fails, a normal export of the page is attempted. This means that pages that trigger the exception will be made non-secure (in one way or another) before attempting to use them again for a different secure guest. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-3-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-3-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-13KVM: s390: pv: leak the topmost page table when destroy failsClaudio Imbrenda
Each secure guest must have a unique ASCE (address space control element); we must avoid that new guests use the same page for their ASCE, to avoid errors. Since the ASCE mostly consists of the address of the topmost page table (plus some flags), we must not return that memory to the pool unless the ASCE is no longer in use. Only a successful Destroy Secure Configuration UVC will make the ASCE reusable again. If the Destroy Configuration UVC fails, the ASCE cannot be reused for a secure guest (either for the ASCE or for other memory areas). To avoid a collision, it must not be used again. This is a permanent error and the page becomes in practice unusable, so we set it aside and leak it. On failure we already leak other memory that belongs to the ultravisor (i.e. the variable and base storage for a guest) and not leaking the topmost page table was an oversight. This error (and thus the leakage) should not happen unless the hardware is broken or KVM has some unknown serious bug. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: 29b40f105ec8d55 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling") Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-06-16mm: avoid unnecessary page fault retires on shared memory typesPeter Xu
I observed that for each of the shared file-backed page faults, we're very likely to retry one more time for the 1st write fault upon no page. It's because we'll need to release the mmap lock for dirty rate limit purpose with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()). Then after that throttling we return VM_FAULT_RETRY. We did that probably because VM_FAULT_RETRY is the only way we can return to the fault handler at that time telling it we've released the mmap lock. However that's not ideal because it's very likely the fault does not need to be retried at all since the pgtable was well installed before the throttling, so the next continuous fault (including taking mmap read lock, walk the pgtable, etc.) could be in most cases unnecessary. It's not only slowing down page faults for shared file-backed, but also add more mmap lock contention which is in most cases not needed at all. To observe this, one could try to write to some shmem page and look at "pgfault" value in /proc/vmstat, then we should expect 2 counts for each shmem write simply because we retried, and vm event "pgfault" will capture that. To make it more efficient, add a new VM_FAULT_COMPLETED return code just to show that we've completed the whole fault and released the lock. It's also a hint that we should very possibly not need another fault immediately on this page because we've just completed it. This patch provides a ~12% perf boost on my aarch64 test VM with a simple program sequentially dirtying 400MB shmem file being mmap()ed and these are the time it needs: Before: 650.980 ms (+-1.94%) After: 569.396 ms (+-1.38%) I believe it could help more than that. We need some special care on GUP and the s390 pgfault handler (for gmap code before returning from pgfault), the rest changes in the page fault handlers should be relatively straightforward. Another thing to mention is that mm_account_fault() does take this new fault as a generic fault to be accounted, unlike VM_FAULT_RETRY. I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping them as-is. Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vineet Gupta <vgupta@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part] Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Brian Cain <bcain@quicinc.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Will Deacon <will@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Simek <monstr@monstr.eu> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: David Hildenbrand <david@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-06virtio: replace arch_has_restricted_virtio_memory_access()Juergen Gross
Instead of using arch_has_restricted_virtio_memory_access() together with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those with platform_has() and a new platform feature PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Borislav Petkov <bp@suse.de>
2022-06-03Merge tag 's390-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "Just a couple of small improvements, bug fixes and cleanups: - Add Eric Farman as maintainer for s390 virtio drivers. - Improve machine check handling, and avoid incorrectly injecting a machine check into a kvm guest. - Add cond_resched() call to gmap page table walker in order to avoid possible huge latencies. Also use non-quiesing sske instruction to speed up storage key handling. - Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves similar like common code. - Get sie control block address from correct stack slot in perf event code. This fixes potential random memory accesses. - Change uaccess code so that the exception handler sets the result of get_user() and __get_kernel_nofault() to zero in case of a fault. Until now this was done via input parameters for inline assemblies. Doing it via fault handling is what most or even all other architectures are doing. - Couple of other small cleanups and fixes" * tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/stack: add union to reflect kvm stack slot usages s390/stack: merge empty stack frame slots s390/uaccess: whitespace cleanup s390/uaccess: use __noreturn instead of __attribute__((noreturn)) s390/uaccess: use exception handler to zero result on get_user() failure s390/uaccess: use symbolic names for inline assembler operands s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag s390/mm: use non-quiescing sske for KVM switch to keyed guest s390/gmap: voluntarily schedule during key setting MAINTAINERS: Update s390 virtio-ccw s390/kexec: add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP s390/Kconfig.debug: fix indentation s390/Kconfig: fix indentation s390/perf: obtain sie_block from the right address s390: generate register offsets into pt_regs automatically s390: simplify early program check handler s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
2022-06-01s390/uaccess: use exception handler to zero result on get_user() failureHeiko Carstens
Historically the uaccess code pre-initializes the result of get_user() (and now also __get_kernel_nofault()) to zero and uses the result as input parameter for inline assemblies. This is different to what most, if not all, other architectures are doing, which set the result to zero within the exception handler in case of a fault. Use the new extable mechanism and handle zeroing of the result within the exception handler in case of a fault. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-06-01s390/mm: use non-quiescing sske for KVM switch to keyed guestChristian Borntraeger
The switch to a keyed guest does not require a classic sske as the other guest CPUs are not accessing the key before the switch is complete. By using the NQ SSKE things are faster especially with multiple guests. Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Suggested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220530092706.11637-3-borntraeger@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-06-01s390/gmap: voluntarily schedule during key settingChristian Borntraeger
With large and many guest with storage keys it is possible to create large latencies or stalls during initial key setting: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998 (t=2100 jiffies g=155867385 q=20879) Task dump for CPU 18: CPU 1/KVM R running task 0 1030947 256019 0x06000004 Call Trace: sched_show_task rcu_dump_cpu_stacks rcu_sched_clock_irq update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt do_IRQ ext_int_handler ptep_zap_key The mmap lock is held during the page walking but since this is a semaphore scheduling is still possible. Same for the kvm srcu. To minimize overhead do this on every segment table entry or large page. Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220530092706.11637-2-borntraeger@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-25Merge tag 'dma-mapping-5.19-2022-05-25' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - don't over-decrypt memory (Robin Murphy) - takes min align mask into account for the swiotlb max mapping size (Tianyu Lan) - use GFP_ATOMIC in dma-debug (Mikulas Patocka) - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me) - don't fail on highmem CMA pages in dma_direct_alloc_pages (me) - cleanup swiotlb initialization and share more code with swiotlb-xen (me, Stefano Stabellini) * tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits) dma-direct: don't over-decrypt memory swiotlb: max mapping size takes min align mask into account swiotlb: use the right nslabs-derived sizes in swiotlb_init_late swiotlb: use the right nslabs value in swiotlb_init_remap swiotlb: don't panic when the swiotlb buffer can't be allocated dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm x86: remove cruft from <asm/dma-mapping.h> swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl swiotlb: merge swiotlb-xen initialization into swiotlb swiotlb: provide swiotlb_init variants that remap the buffer swiotlb: pass a gfp_mask argument to swiotlb_init_late swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction swiotlb: make the swiotlb_init interface more useful x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled x86: remove the IOMMU table infrastructure MIPS/octeon: use swiotlb_init instead of open coding it arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region swiotlb: rename swiotlb_late_init_with_default_size ...
2022-05-23Merge tag 's390-5.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Make use of the IBM z16 processor activity instrumentation facility to count cryptography operations: add a new PMU device driver so that perf can make use of this. - Add new IBM z16 extended counter set to cpumf support. - Add vdso randomization support. - Add missing KCSAN instrumentation to barriers and spinlocks, which should make s390's KCSAN support complete. - Add support for IPL-complete-control facility: notify the hypervisor that kexec finished work and the kernel starts. - Improve error logging for PCI. - Various small changes to workaround llvm's integrated assembler limitations, and one bug, to make it finally possible to compile the kernel with llvm's integrated assembler. This also requires to raise the minimum clang version to 14.0.0. - Various other small enhancements, bug fixes, and cleanups all over the place. * tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/head: get rid of 31 bit leftovers scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390 s390/boot: do not emit debug info for assembly with llvm's IAS s390/boot: workaround llvm IAS bug s390/purgatory: workaround llvm's IAS limitations s390/entry: workaround llvm's IAS limitations s390/alternatives: remove padding generation code s390/alternatives: provide identical sized orginal/alternative sequences s390/cpumf: add new extended counter set for IBM z16 s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES s390/stp: clock_delta should be signed s390/stp: fix todoff size s390/pai: add support for cryptography counters entry: Rename arch_check_user_regs() to arch_enter_from_user_mode() s390/compat: cleanup compat_linux.h header file s390/entry: remove broken and not needed code s390/boot: convert parmarea to C s390/boot: convert initial lowcore to C s390/ptrace: move short psw definitions to ptrace header file s390/head: initialize all new psws ...
2022-05-03KVM: s390: vsie/gmap: reduce gmap_rmap overheadChristian Borntraeger
there are cases that trigger a 2nd shadow event for the same vmaddr/raddr combination. (prefix changes, reboots, some known races) This will increase memory usages and it will result in long latencies when cleaning up, e.g. on shutdown. To avoid cases with a list that has hundreds of identical raddrs we check existing entries at insert time. As this measurably reduces the list length this will be faster than traversing the list at shutdown time. In the long run several places will be optimized to create less entries and a shrinker might be necessary. Fixes: 4be130a08420 ("s390/mm: add shadow gmap support") Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20220429151526.1560-1-borntraeger@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-04-25s390/mmap: increase stack/mmap gap to 128MBSven Schnelle
This basically reverts commit 9e78a13bfb16 ("[S390] reduce miminum gap between stack and mmap_base"). 32MB is not enough space between stack and mmap for some programs. Given that compat task aren't common these days, lets revert back to 128MB. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-04-18swiotlb: make the swiotlb_init interface more usefulChristoph Hellwig
Pass a boolean flag to indicate if swiotlb needs to be enabled based on the addressing needs, and replace the verbose argument with a set of flags, including one to force enable bounce buffering. Note that this patch removes the possibility to force xen-swiotlb use with the swiotlb=force parameter on the command line on x86 (arm and arm64 never supported that), but this interface will be restored shortly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-03-10s390: convert ".insn" encoding to instruction namesVasily Gorbik
With z10 as minimum supported machine generation many ".insn" encodings could be now converted to instruction names. There are couple of exceptions - stfle is used from the als code built for z900 and cannot be converted - few ".insn" directives encode unsupported instruction formats The generated code is identical before/after this change. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-10s390: raise minimum supported machine generation to z10Vasily Gorbik
Machine generations up to z9 (released in May 2006) have been officially out of service for several years now (z9 end of service - January 31, 2019). No distributions build kernels supporting those old machine generations anymore, except Debian, which seems to pick the oldest supported generation. The team supporting Debian on s390 has been notified about the change. Raising minimum supported machine generation to z10 helps to reduce maintenance cost and effectively remove code, which is not getting enough testing coverage due to lack of older hardware and distributions support. Besides that this unblocks some optimization opportunities and allows to use wider instruction set in asm files for future features implementation. Due to this change spectre mitigation and usercopy implementations could be drastically simplified and many newer instructions could be converted from ".insn" encoding to instruction names. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: add dedicated uaccess handlerHeiko Carstens
This is more or less a combination of commit 2e77a62cb3a6 ("arm64: extable: add a dedicated uaccess handler") and commit 4b5305decc84 ("x86/extable: Extend extable functionality"). To describe the problem that needs to solved let's cite the full arm64 commit message: ------ For inline assembly, we place exception fixups out-of-line in the `.fixup` section such that these are out of the way of the fast path. This has a few drawbacks: * Since the fixup code is anonymous, backtraces will symbolize fixups as offsets from the nearest prior symbol, currently `__entry_tramp_text_end`. This is confusing, and painful to debug without access to the relevant vmlinux. * Since the exception handler adjusts the PC to execute the fixup, and the fixup uses a direct branch back into the function it fixes, backtraces of fixups miss the original function. This is confusing, and violates requirements for RELIABLE_STACKTRACE (and therefore LIVEPATCH). * Inline assembly and associated fixups are generated from templates, and we have many copies of logically identical fixups which only differ in which specific registers are written to and which address is branched to at the end of the fixup. This is potentially wasteful of I-cache resources, and makes it hard to add additional logic to fixups without significant bloat. This patch address all three concerns for inline uaccess fixups by adding a dedicated exception handler which updates registers in exception context and subsequent returns back into the function which faulted, removing the need for fixups specialized to each faulting instruction. Other than backtracing, there should be no functional change as a result of this patch. ------ Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: convert to relative table with dataHeiko Carstens
Follow arm64, riscv, and x86 and change extable layout to common "relative table with data". This allows to get rid of s390 specific code in sorttable.c. The main difference to before is that extable entries do not contain a relative function pointer anymore. Instead data and type fields are added. The type field is used to indicate which exception handler needs to be called, while the data field is currently unused. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: add and use fixup_exception helper functionHeiko Carstens
Add and use fixup_exception helper function in order to remove the duplicated exception handler fixup code at several places. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: move extable related functions to mm/extable.cHeiko Carstens
Just like arm64, riscv, and x86 move extable related functions to mm/extable.c. This is currently only one function, but this will change with subsequent changes. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: move EX_TABLE define to asm-extable.hHeiko Carstens
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: search amode31 extable lastHeiko Carstens
It is very unlikely that an exception happens within the amode31 text section, therefore safe a couple of cycles for the common case, and search the amode31 extable last. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm,gmap: don't use pte_val()/pXd_val() as lvalueHeiko Carstens
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm,hugetlb: don't use pte_val()/pXd_val() as lvalueHeiko Carstens
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm,pageattr: don't use pte_val()/pXd_val() as lvalueHeiko Carstens
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm,pgtable: don't use pte_val()/pXd_val() as lvalueHeiko Carstens
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm: use set_pXd()/set_pte() helper functions everywhereHeiko Carstens
Use the new set_pXd()/set_pte() helper functions at all places where page table entries are modified. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/mm: use CRST_ALLOC_ORDER instead of numberHeiko Carstens
Use CRST_ALLOC_ORDER to make it more obvious what the order means, and also to be consistent with other code, e.g. the vmemmap code. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/maccess: fix semantics of memcpy_real() and its callersAlexander Gordeev
There is a confusion with regard to the source address of memcpy_real() and calling functions. While the declared type for a source assumes a virtual address, in fact it always called with physical address of the source. This confusion led to bugs in copy_oldmem_kernel() and copy_oldmem_user() functions, where __pa() macro applied mistakenly to physical addresses. It does not lead to a real issue, since virtual and physical addresses are currently the same. Fix both the bugs and memcpy_real() prototype by making type of source address consistent to the function name and the way it actually used. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/maccess: fix absolute lowcore virtual vs physical address confusionAlexander Gordeev
Due to historical reasons memcpy_absolute() and friend functions misuse the notion of physical vs virtual addresses difference. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390: remove invalid email address of Heiko CarstensHeiko Carstens
Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ...
2022-01-15mm: remove redundant check about FAULT_FLAG_ALLOW_RETRY bitQi Zheng
Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times") allowed VM_FAULT_RETRY for multiple times, the FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page fault path, so the following check is no longer needed: flags & FAULT_FLAG_ALLOW_RETRY So just remove it. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Peter Xu <peterx@redhat.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-10Merge tag '5.17-net-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Defer freeing TCP skbs to the BH handler, whenever possible, or at least perform the freeing outside of the socket lock section to decrease cross-CPU allocator work and improve latency. - Add netdevice refcount tracking to locate sources of netdevice and net namespace refcount leaks. - Make Tx watchdog less intrusive - avoid pausing Tx and restarting all queues from a single CPU removing latency spikes. - Various small optimizations throughout the stack from Eric Dumazet. - Make netdev->dev_addr[] constant, force modifications to go via appropriate helpers to allow us to keep addresses in ordered data structures. - Replace unix_table_lock with per-hash locks, improving performance of bind() calls. - Extend skb drop tracepoint with a drop reason. - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW. BPF --- - New helpers: - bpf_find_vma(), find and inspect VMAs for profiling use cases - bpf_loop(), runtime-bounded loop helper trading some execution time for much faster (if at all converging) verification - bpf_strncmp(), improve performance, avoid compiler flakiness - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt() for tracing programs, all inlined by the verifier - Support BPF relocations (CO-RE) in the kernel loader. - Further the support for BTF_TYPE_TAG annotations. - Allow access to local storage in sleepable helpers. - Convert verifier argument types to a composable form with different attributes which can be shared across types (ro, maybe-null). - Prepare libbpf for upcoming v1.0 release by cleaning up APIs, creating new, extensible ones where missing and deprecating those to be removed. Protocols --------- - WiFi (mac80211/cfg80211): - notify user space about long "come back in N" AP responses, allow it to react to such temporary rejections - allow non-standard VHT MCS 10/11 rates - use coarse time in airtime fairness code to save CPU cycles - Bluetooth: - rework of HCI command execution serialization to use a common queue and work struct, and improve handling errors reported in the middle of a batch of commands - rework HCI event handling to use skb_pull_data, avoiding packet parsing pitfalls - support AOSP Bluetooth Quality Report - SMC: - support net namespaces, following the RDMA model - improve connection establishment latency by pre-clearing buffers - introduce TCP ULP for automatic redirection to SMC - Multi-Path TCP: - support ioctls: SIOCINQ, OUTQ, and OUTQNSD - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY - support cmsgs: TCP_INQ - improvements in the data scheduler (assigning data to subflows) - support fastclose option (quick shutdown of the full MPTCP connection, similar to TCP RST in regular TCP) - MCTP (Management Component Transport) over serial, as defined by DMTF spec DSP0253 - "MCTP Serial Transport Binding". Driver API ---------- - Support timestamping on bond interfaces in active/passive mode. - Introduce generic phylink link mode validation for drivers which don't have any quirks and where MAC capability bits fully express what's supported. Allow PCS layer to participate in the validation. Convert a number of drivers. - Add support to set/get size of buffers on the Rx rings and size of the tx copybreak buffer via ethtool. - Support offloading TC actions as first-class citizens rather than only as attributes of filters, improve sharing and device resource utilization. - WiFi (mac80211/cfg80211): - support forwarding offload (ndo_fill_forward_path) - support for background radar detection hardware - SA Query Procedures offload on the AP side New hardware / drivers ---------------------- - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with real-time requirements for isochronous communication with protocols like OPC UA Pub/Sub. - Qualcomm BAM-DMUX WWAN - driver for data channels of modems integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974 (qcom_bam_dmux). - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver with support for bridging, VLANs and multicast forwarding (lan966x). - iwlmei driver for co-operating between Intel's WiFi driver and Intel's Active Management Technology (AMT) devices. - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips - Bluetooth: - MediaTek MT7921 SDIO devices - Foxconn MT7922A - Realtek RTL8852AE Drivers ------- - Significantly improve performance in the datapaths of: lan78xx, ax88179_178a, lantiq_xrx200, bnxt. - Intel Ethernet NICs: - igb: support PTP/time PEROUT and EXTTS SDP functions on 82580/i354/i350 adapters - ixgbevf: new PF -> VF mailbox API which avoids the risk of mailbox corruption with ESXi - iavf: support configuration of VLAN features of finer granularity, stacked tags and filtering - ice: PTP support for new E822 devices with sub-ns precision - ice: support firmware activation without reboot - Mellanox Ethernet NICs (mlx5): - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - support TC forwarding when tunnel encap and decap happen between two ports of the same NIC - dynamically size and allow disabling various features to save resources for running in embedded / SmartNIC scenarios - Broadcom Ethernet NICs (bnxt): - use page frag allocator to improve Rx performance - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - Other Ethernet NICs: - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support - Microsoft cloud/virtual NIC (mana): - add XDP support (PASS, DROP, TX) - Mellanox Ethernet switches (mlxsw): - initial support for Spectrum-4 ASICs - VxLAN with IPv6 underlay - Marvell Ethernet switches (prestera): - support flower flow templates - add basic IP forwarding support - NXP embedded Ethernet switches (ocelot & felix): - support Per-Stream Filtering and Policing (PSFP) - enable cut-through forwarding between ports by default - support FDMA to improve packet Rx/Tx to CPU - Other embedded switches: - hellcreek: improve trapping management (STP and PTP) packets - qca8k: support link aggregation and port mirroring - Qualcomm 802.11ax WiFi (ath11k): - qca6390, wcn6855: enable 802.11 power save mode in station mode - BSS color change support - WCN6855 hw2.1 support - 11d scan offload support - scan MAC address randomization support - full monitor mode, only supported on QCN9074 - qca6390/wcn6855: report signal and tx bitrate - qca6390: rfkill support - qca6390/wcn6855: regdb.bin support - Intel WiFi (iwlwifi): - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS) in cooperation with the BIOS - support for Optimized Connectivity Experience (OCE) scan - support firmware API version 68 - lots of preparatory work for the upcoming Bz device family - MediaTek WiFi (mt76): - Specific Absorption Rate (SAR) support - mt7921: 160 MHz channel support - RealTek WiFi (rtw88): - Specific Absorption Rate (SAR) support - scan offload - Other WiFi NICs - ath10k: support fetching (pre-)calibration data from nvmem - brcmfmac: configure keep-alive packet on suspend - wcn36xx: beacon filter support" * tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits) tcp: tcp_send_challenge_ack delete useless param `skb` net/qla3xxx: Remove useless DMA-32 fallback configuration rocker: Remove useless DMA-32 fallback configuration hinic: Remove useless DMA-32 fallback configuration lan743x: Remove useless DMA-32 fallback configuration net: enetc: Remove useless DMA-32 fallback configuration cxgb4vf: Remove useless DMA-32 fallback configuration cxgb4: Remove useless DMA-32 fallback configuration cxgb3: Remove useless DMA-32 fallback configuration bnx2x: Remove useless DMA-32 fallback configuration et131x: Remove useless DMA-32 fallback configuration be2net: Remove useless DMA-32 fallback configuration vmxnet3: Remove useless DMA-32 fallback configuration bna: Simplify DMA setting net: alteon: Simplify DMA setting myri10ge: Simplify DMA setting qlcnic: Simplify DMA setting net: allwinner: Fix print format page_pool: remove spinlock in page_pool_refill_alloc_cache() amt: fix wrong return type of amt_send_membership_update() ...
2021-12-16add includes masked by cgroup -> bpf dependencyJakub Kicinski
cgroup pulls in BPF which pulls in a lot of includes. We're about to break that chain so fix those who were depending on it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211216025538.1649516-2-kuba@kernel.org
2021-12-16s390/mm: check 2KB-fragment page on releaseAlexander Gordeev
When CONFIG_DEBUG_VM is defined check that pending remove and tracking nibbles (bits 31-24 of the page refcount) are cleared. Should the earlier stages of the page lifespan have a race or logical error, such check could help in exposing the issue. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-10 05:20:54 +0000