summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/thread_info.h
AgeCommit message (Collapse)Author
2021-09-30x86: add CPU field to struct thread_infoArd Biesheuvel
The CPU field will be moved back into thread_info even when THREAD_INFO_IN_TASK is enabled, so add it back to x86's definition of struct thread_info. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-07-28x86/mm: Prepare for opt-in based L1D flush in switch_mm()Balbir Singh
The goal of this is to allow tasks that want to protect sensitive information, against e.g. the recently found snoop assisted data sampling vulnerabilites, to flush their L1D on being switched out. This protects their data from being snooped or leaked via side channels after the task has context switched out. This could also be used to wipe L1D when an untrusted task is switched in, but that's not a really well defined scenario while the opt-in variant is clearly defined. The mechanism is default disabled and can be enabled on the kernel command line. Prepare for the actual prctl based opt-in: 1) Provide the necessary setup functionality similar to the other mitigations and enable the static branch when the command line option is set and the CPU provides support for hardware assisted L1D flushing. Software based L1D flush is not supported because it's CPU model specific and not really well defined. This does not come with a sysfs file like the other mitigations because it is not bound to any specific vulnerability. Support has to be queried via the prctl(2) interface. 2) Add TIF_SPEC_L1D_FLUSH next to L1D_SPEC_IB so the two bits can be mangled into the mm pointer in one go which allows to reuse the existing mechanism in switch_mm() for the conditional IBPB speculation barrier efficiently. 3) Add the L1D flush specific functionality which flushes L1D when the outgoing task opted in. Also check whether the incoming task has requested L1D flush and if so validate that it is not accidentaly running on an SMT sibling as this makes the whole excercise moot because SMT siblings share L1D which opens tons of other attack vectors. If that happens schedule task work which signals the incoming task on return to user/guest with SIGBUS as this is part of the paranoid L1D flush contract. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Balbir Singh <sblbir@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210108121056.21940-1-sblbir@amazon.com
2021-07-28x86/process: Make room for TIF_SPEC_L1D_FLUSHBalbir Singh
The upcoming support for paranoid L1D flush in switch_mm() requires that TIF_SPEC_IB and the new TIF_SPEC_L1D_FLUSH are two consecutive bits in thread_info::flags. Move TIF_SPEC_FORCE_UPDATE to a spare bit to make room for the new one. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Balbir Singh <sblbir@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210108121056.21940-1-sblbir@amazon.com
2021-03-28x86/process/64: Move cpu_current_top_of_stack out of TSSLai Jiangshan
cpu_current_top_of_stack is currently stored in TSS.sp1. TSS is exposed through the cpu_entry_area which is visible with user CR3 when PTI is enabled and active. This makes it a coveted fruit for attackers. An attacker can fetch the kernel stack top from it and continue next steps of actions based on the kernel stack. But it is actualy not necessary to be stored in the TSS. It is only accessed after the entry code switched to kernel CR3 and kernel GS_BASE which means it can be in any regular percpu variable. The reason why it is in TSS is historical (pre PTI) because TSS is also used as scratch space in SYSCALL_64 and therefore cache hot. A syscall also needs the per CPU variable current_task and eventually __preempt_count, so placing cpu_current_top_of_stack next to them makes it likely that they end up in the same cache line which should avoid performance regressions. This is not enforced as the compiler is free to place these variables, so these entry relevant variables should move into a data structure to make this enforceable. The seccomp_benchmark doesn't show any performance loss in the "getpid native" test result. Actually, the result changes from 93ns before to 92ns with this change when KPTI is disabled. The test is very stable and although the test doesn't show a higher degree of precision it gives enough confidence that moving cpu_current_top_of_stack does not cause a regression. [ tglx: Removed unneeded export. Massaged changelog ] Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210125173444.22696-2-jiangshanlai@gmail.com
2021-03-16x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTARTOleg Nesterov
Save the current_thread_info()->status of X86 in the new restart_block->arch_data field so TS_COMPAT_RESTART can be removed again. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210201174716.GA17898@redhat.com
2021-03-16x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()Oleg Nesterov
The comment in get_nr_restart_syscall() says: * The problem is that we can get here when ptrace pokes * syscall-like values into regs even if we're not in a syscall * at all. Yes, but if not in a syscall then the status & (TS_COMPAT|TS_I386_REGS_POKED) check below can't really help: - TS_COMPAT can't be set - TS_I386_REGS_POKED is only set if regs->orig_ax was changed by 32bit debugger; and even in this case get_nr_restart_syscall() is only correct if the tracee is 32bit too. Suppose that a 64bit debugger plays with a 32bit tracee and * Tracee calls sleep(2) // TS_COMPAT is set * User interrupts the tracee by CTRL-C after 1 sec and does "(gdb) call func()" * gdb saves the regs by PTRACE_GETREGS * does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1 * PTRACE_CONT // TS_COMPAT is cleared * func() hits int3. * Debugger catches SIGTRAP. * Restore original regs by PTRACE_SETREGS. * PTRACE_CONT get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the tracee calls ia32_sys_call_table[219] == sys_madvise. Add the sticky TS_COMPAT_RESTART flag which survives after return to user mode. It's going to be removed in the next step again by storing the information in the restart block. As a further cleanup it might be possible to remove also TS_I386_REGS_POKED with that. Test-case: $ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests $ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32 $ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil $ ./erestartsys-trap-debugger Unexpected: retval 1, errno 22 erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421 Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code") Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
2021-03-16x86: Move TS_COMPAT back to asm/thread_info.hOleg Nesterov
Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED. It was moved to asm/processor.h by b9d989c7218a ("x86/asm: Move the thread_info::status field to thread_struct"), then later 37a8f7c38339 ("x86/asm: Move 'status' from thread_struct to thread_info") moved the 'status' field back but TS_COMPAT was forgotten. Preparatory patch to fix the COMPAT case for get_nr_restart_syscall() Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
2020-11-16x86: Reclaim unused x86 TI flagsGabriel Krisman Bertazi
Reclaim TI flags that were migrated to syscall_work flags. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-11-krisman@collabora.com
2020-11-16x86: Expose syscall_work field in thread_infoGabriel Krisman Bertazi
This field will be used by SYSCALL_WORK flags, migrated from TI flags. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-2-krisman@collabora.com
2020-10-29x86: Wire up TIF_NOTIFY_SIGNALJens Axboe
The generic entry code has support for TIF_NOTIFY_SIGNAL already. Just provide the TIF bit. [ tglx: Adopted to other TIF changes in x86 ] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201026203230.386348-4-axboe@kernel.dk
2020-10-26x86: Reclaim TIF_IA32 and TIF_X32Gabriel Krisman Bertazi
Now that these flags are no longer used, reclaim those TIF bits. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201004032536.1229030-11-krisman@collabora.com
2020-09-08x86: remove address space overrides using set_fs()Christoph Hellwig
Stop providing the possibility to override the address space using set_fs() now that there is no need for that any more. To properly handle the TASK_SIZE_MAX checking for 4 vs 5-level page tables on x86 a new alternative is introduced, which just like the one in entry_64.S has to use the hardcoded virtual address bits to escape the fact that TASK_SIZE_MAX isn't actually a constant when 5-level page tables are enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-24x86/entry: Use generic syscall entry functionThomas Gleixner
Replace the syscall entry work handling with the generic version. Provide the necessary helper inlines to handle the real architecture specific parts, e.g. ptrace. Use a temporary define for idtentry_enter_user which will be cleaned up seperately. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20200722220520.376213694@linutronix.de
2020-03-30Merge tag 'x86-splitlock-2020-03-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 splitlock updates from Thomas Gleixner: "Support for 'split lock' detection: Atomic operations (lock prefixed instructions) which span two cache lines have to acquire the global bus lock. This is at least 1k cycles slower than an atomic operation within a cache line and disrupts performance on other cores. Aside of performance disruption this is a unpriviledged form of DoS. Some newer CPUs have the capability to raise an #AC trap when such an operation is attempted. The detection is by default enabled in warning mode which will warn once when a user space application is caught. A command line option allows to disable the detection or to select fatal mode which will terminate offending applications with SIGBUS" * tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR x86/split_lock: Rework the initialization flow of split lock detection x86/split_lock: Enable split lock detection by kernel
2020-02-20x86/split_lock: Enable split lock detection by kernelPeter Zijlstra (Intel)
A split-lock occurs when an atomic instruction operates on data that spans two cache lines. In order to maintain atomicity the core takes a global bus lock. This is typically >1000 cycles slower than an atomic operation within a cache line. It also disrupts performance on other cores (which must wait for the bus lock to be released before their memory operations can complete). For real-time systems this may mean missing deadlines. For other systems it may just be very annoying. Some CPUs have the capability to raise an #AC trap when a split lock is attempted. Provide a command line option to give the user choices on how to handle this: split_lock_detect= off - not enabled (no traps for split locks) warn - warn once when an application does a split lock, but allow it to continue running. fatal - Send SIGBUS to applications that cause split lock On systems that support split lock detection the default is "warn". Note that if the kernel hits a split lock in any mode other than "off" it will OOPs. One implementation wrinkle is that the MSR to control the split lock detection is per-core, not per thread. This might result in some short lived races on HT systems in "warn" mode if Linux tries to enable on one thread while disabling on the other. Race analysis by Sean Christopherson: - Toggling of split-lock is only done in "warn" mode. Worst case scenario of a race is that a misbehaving task will generate multiple #AC exceptions on the same instruction. And this race will only occur if both siblings are running tasks that generate split-lock #ACs, e.g. a race where sibling threads are writing different values will only occur if CPUx is disabling split-lock after an #AC and CPUy is re-enabling split-lock after *its* previous task generated an #AC. - Transitioning between off/warn/fatal modes at runtime isn't supported and disabling is tracked per task, so hardware will always reach a steady state that matches the configured mode. I.e. split-lock is guaranteed to be enabled in hardware once all _TIF_SLD threads have been scheduled out. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200126200535.GB30377@agluck-desk2.amr.corp.intel.com
2020-02-14x86: Remove TIF_NOHZFrederic Weisbecker
Static keys have replaced TIF_NOHZ to optimize the calls to context tracking. We can now safely remove that thread flag. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org>
2020-02-14x86/entry: Remove _TIF_NOHZ from _TIF_WORK_SYSCALL_ENTRYThomas Gleixner
Evaluating _TIF_NOHZ to decide whether to use the slow syscall entry path is not only pointless, it's actually counterproductive: 1) Context tracking code is invoked unconditionally before that flag is evaluated. 2) If the flag is set the slow path is invoked for nothing due to #1 Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2020-01-08x86: Remove force_iret()Brian Gerst
force_iret() was originally intended to prevent the return to user mode with the SYSRET or SYSEXIT instructions, in cases where the register state could have been changed to be incompatible with those instructions. The entry code has been significantly reworked since then, and register state is validated before SYSRET or SYSEXIT are used. force_iret() no longer serves its original purpose and can be eliminated. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20191219115812.102620-1-brgerst@gmail.com
2019-11-16x86/ioperm: Extend IOPL config to control ioperm() as wellThomas Gleixner
If iopl() is disabled, then providing ioperm() does not make much sense. Rename the config option and disable/enable both syscalls with it. Guard the code with #ifdefs where appropriate. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-16x86/ioperm: Move TSS bitmap update to exit to user workThomas Gleixner
There is no point to update the TSS bitmap for tasks which use I/O bitmaps on every context switch. It's enough to update it right before exiting to user space. That reduces the context switch bitmap handling to invalidating the io bitmap base offset in the TSS when the outgoing task has TIF_IO_BITMAP set. The invaldiation is done on purpose when a task with an IO bitmap switches out to prevent any possible leakage of an activated IO bitmap. It also removes the requirement to update the tasks bitmap atomically in ioperm(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-04-11x86/entry: Add TIF_NEED_FPU_LOADSebastian Andrzej Siewior
Add TIF_NEED_FPU_LOAD. This flag is used for loading the FPU registers before returning to userland. It must not be set on systems without a FPU. If this flag is cleared, the CPU's FPU registers hold the latest, up-to-date content of the current task's (current()) FPU registers. The in-memory copy (union fpregs_state) is not valid. If this flag is set, then all of CPU's FPU registers may hold a random value (except for PKRU) and it is required to load the content of the FPU registers on return to userland. Introduce it now as a preparatory change before adding the main feature. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aubrey Li <aubrey.li@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: kvm ML <kvm@vger.kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190403164156.19645-17-bigeasy@linutronix.de
2018-12-03x86/thread_info: Remove _TIF_ALLWORK_MASKSebastian Andrzej Siewior
There is no user of _TIF_ALLWORK_MASK since commit 21d375b6b34ff ("x86/entry/64: Remove the SYSCALL64 fast path"). Remove the unused define _TIF_ALLWORK_MASK. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: kvm ML <kvm@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181128222035.2996-4-bigeasy@linutronix.de
2018-11-28x86/speculation: Prevent stale SPEC_CTRL msr contentThomas Gleixner
The seccomp speculation control operates on all tasks of a process, but only the current task of a process can update the MSR immediately. For the other threads the update is deferred to the next context switch. This creates the following situation with Process A and B: Process A task 2 and Process B task 1 are pinned on CPU1. Process A task 2 does not have the speculation control TIF bit set. Process B task 1 has the speculation control TIF bit set. CPU0 CPU1 MSR bit is set ProcB.T1 schedules out ProcA.T2 schedules in MSR bit is cleared ProcA.T1 seccomp_update() set TIF bit on ProcA.T2 ProcB.T1 schedules in MSR is not updated <-- FAIL This happens because the context switch code tries to avoid the MSR update if the speculation control TIF bits of the incoming and the outgoing task are the same. In the worst case ProcB.T1 and ProcA.T2 are the only tasks scheduling back and forth on CPU1, which keeps the MSR stale forever. In theory this could be remedied by IPIs, but chasing the remote task which could be migrated is complex and full of races. The straight forward solution is to avoid the asychronous update of the TIF bit and defer it to the next context switch. The speculation control state is stored in task_struct::atomic_flags by the prctl and seccomp updates already. Add a new TIF_SPEC_FORCE_UPDATE bit and set this after updating the atomic_flags. Check the bit on context switch and force a synchronous update of the speculation control if set. Use the same mechanism for updating the current task. Reported-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811272247140.1875@nanos.tec.linutronix.de
2018-11-28x86/speculation: Avoid __switch_to_xtra() callsThomas Gleixner
The TIF_SPEC_IB bit does not need to be evaluated in the decision to invoke __switch_to_xtra() when: - CONFIG_SMP is disabled - The conditional STIPB mode is disabled The TIF_SPEC_IB bit still controls IBPB in both cases so the TIF work mask checks might invoke __switch_to_xtra() for nothing if TIF_SPEC_IB is the only set bit in the work masks. Optimize it out by masking the bit at compile time for CONFIG_SMP=n and at run time when the static key controlling the conditional STIBP mode is disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.374062201@linutronix.de
2018-11-28x86/speculation: Prepare for per task indirect branch speculation controlTim Chen
To avoid the overhead of STIBP always on, it's necessary to allow per task control of STIBP. Add a new task flag TIF_SPEC_IB and evaluate it during context switch if SMT is active and flag evaluation is enabled by the speculation control code. Add the conditional evaluation to x86_virt_spec_ctrl() as well so the guest/host switch works properly. This has no effect because TIF_SPEC_IB cannot be set yet and the static key which controls evaluation is off. Preparatory patch for adding the control code. [ tglx: Simplify the context switch logic and make the TIF evaluation depend on SMP=y and on the static key controlling the conditional update. Rename it to TIF_SPEC_IB because it controls both STIBP and IBPB ] Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.176917199@linutronix.de
2018-11-28x86/speculation: Update the TIF_SSBD commentTim Chen
"Reduced Data Speculation" is an obsolete term. The correct new name is "Speculative store bypass disable" - which is abbreviated into SSBD. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185003.593893901@linutronix.de
2018-05-09x86/bugs: Rename _RDS to _SSBDKonrad Rzeszutek Wilk
Intel collateral will reference the SSB mitigation bit in IA32_SPEC_CTL[2] as SSBD (Speculative Store Bypass Disable). Hence changing it. It is unclear yet what the MSR_IA32_ARCH_CAPABILITIES (0x10a) Bit(4) name is going to be. Following the rename it would be SSBD_NO but that rolls out to Speculative Store Bypass Disable No. Also fixed the missing space in X86_FEATURE_AMD_SSBD. [ tglx: Fixup x86_amd_rds_enable() and rds_tif_to_amd_ls_cfg() as well ] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-05-03x86/process: Allow runtime control of Speculative Store BypassThomas Gleixner
The Speculative Store Bypass vulnerability can be mitigated with the Reduced Data Speculation (RDS) feature. To allow finer grained control of this eventually expensive mitigation a per task mitigation control is required. Add a new TIF_RDS flag and put it into the group of TIF flags which are evaluated for mismatch in switch_to(). If these bits differ in the previous and the next task, then the slow path function __switch_to_xtra() is invoked. Implement the TIF_RDS dependent mitigation control in the slow path. If the prctl for controlling Speculative Store Bypass is disabled or no task uses the prctl then there is no overhead in the switch_to() fast path. Update the KVM related speculation control functions to take TID_RDS into account as well. Based on a patch from Tim Chen. Completely rewritten. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-02-04Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull spectre/meltdown updates from Thomas Gleixner: "The next round of updates related to melted spectrum: - The initial set of spectre V1 mitigations: - Array index speculation blocker and its usage for syscall, fdtable and the n180211 driver. - Speculation barrier and its usage in user access functions - Make indirect calls in KVM speculation safe - Blacklisting of known to be broken microcodes so IPBP/IBSR are not touched. - The initial IBPB support and its usage in context switch - The exposure of the new speculation MSRs to KVM guests. - A fix for a regression in x86/32 related to the cpu entry area - Proper whitelisting for known to be safe CPUs from the mitigations. - objtool fixes to deal proper with retpolines and alternatives - Exclude __init functions from retpolines which speeds up the boot process. - Removal of the syscall64 fast path and related cleanups and simplifications - Removal of the unpatched paravirt mode which is yet another source of indirect unproteced calls. - A new and undisputed version of the module mismatch warning - A couple of cleanup and correctness fixes all over the place Yet another step towards full mitigation. There are a few things still missing like the RBS underflow mitigation for Skylake and other small details, but that's being worked on. That said, I'm taking a belated christmas vacation for a week and hope that everything is magically solved when I'm back on Feb 12th" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES KVM/x86: Add IBPB support KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL x86/pti: Mark constant arrays as __initconst x86/spectre: Simplify spectre_v2 command line parsing x86/retpoline: Avoid retpolines for built-in __init functions x86/kvm: Update spectre-v1 mitigation KVM: VMX: make MSR bitmaps per-VCPU x86/paravirt: Remove 'noreplace-paravirt' cmdline option x86/speculation: Use Indirect Branch Prediction Barrier in context switch x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable" x86/spectre: Report get_user mitigation for spectre_v1 nl80211: Sanitize array index in parse_txq_params vfs, fdtable: Prevent bounds-check bypass via speculative execution x86/syscall: Sanitize syscall table de-references under speculation x86/get_user: Use pointer masking to limit speculation ...
2018-01-30x86/asm: Move 'status' from thread_struct to thread_infoAndy Lutomirski
The TS_COMPAT bit is very hot and is accessed from code paths that mostly also touch thread_info::flags. Move it into struct thread_info to improve cache locality. The only reason it was in thread_struct is that there was a brief period during which arch-specific fields were not allowed in struct thread_info. Linus suggested further changing: ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED); to: if (unlikely(ti->status & (TS_COMPAT|TS_I386_REGS_POKED))) ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED); on the theory that frequently dirtying the cacheline even in pure 64-bit code that never needs to modify status hurts performance. That could be a reasonable followup patch, but I suspect it matters less on top of this patch. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Link: https://lkml.kernel.org/r/03148bcc1b217100e6e8ecf6a5468c45cf4304b6.1517164461.git.luto@kernel.org
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2017-12-17x86/entry/64: Make cpu_entry_area.tss read-onlyAndy Lutomirski
The TSS is a fairly juicy target for exploits, and, now that the TSS is in the cpu_entry_area, it's no longer protected by kASLR. Make it read-only on x86_64. On x86_32, it can't be RO because it's written by the CPU during task switches, and we use a task gate for double faults. I'd also be nervous about errata if we tried to make it RO even on configurations without double fault handling. [ tglx: AMD confirmed that there is no problem on 64-bit with TSS RO. So it's probably safe to assume that it's a non issue, though Intel might have been creative in that area. Still waiting for confirmation. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150606.733700132@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-17x86/entry/64: Separate cpu_current_top_of_stack from TSS.sp0Andy Lutomirski
On 64-bit kernels, we used to assume that TSS.sp0 was the current top of stack. With the addition of an entry trampoline, this will no longer be the case. Store the current top of stack in TSS.sp1, which is otherwise unused but shares the same cacheline. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150606.050864668@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-29x86/asm: Use register variable to get stack pointer valueAndrey Ryabinin
Currently we use current_stack_pointer() function to get the value of the stack pointer register. Since commit: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") ... we have a stack register variable declared. It can be used instead of current_stack_pointer() function which allows to optimize away some excessive "mov %rsp, %<dst>" instructions: -mov %rsp,%rdx -sub %rdx,%rax -cmp $0x3fff,%rax -ja ffffffff810722fd <ist_begin_non_atomic+0x2d> +sub %rsp,%rax +cmp $0x3fff,%rax +ja ffffffff810722fa <ist_begin_non_atomic+0x2a> Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer and use it instead of the removed function. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929141537.29167-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-08x86/syscalls: Check address limit on user-mode returnThomas Garnier
Ensure the address limit is a user-mode segment before returning to user-mode. Otherwise a process can corrupt kernel-mode memory and elevate privileges [1]. The set_fs function sets the TIF_SETFS flag to force a slow path on return. In the slow path, the address limit is checked to be USER_DS if needed. The addr_limit_user_check function is added as a cross-architecture function to check the address limit. [1] https://bugs.chromium.org/p/project-zero/issues/detail?id=990 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: kernel-hardening@lists.openwall.com Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Petr Mladek <pmladek@suse.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Will Drewry <wad@chromium.org> Cc: linux-api@vger.kernel.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/20170615011203.144108-1-thgarnie@google.com
2017-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces
2017-05-02Merge tag 'usercopy-v4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy updates from Kees Cook: "A couple hardened usercopy changes: - drop now unneeded is_vmalloc_or_module() check (Laura Abbott) - use enum instead of literals for stack frame API (Sahara)" * tag 'usercopy-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm/usercopy: Drop extra is_vmalloc_or_module() check usercopy: Move enum for arch_within_stack_frames()
2017-04-04usercopy: Move enum for arch_within_stack_frames()Sahara
This patch moves the arch_within_stack_frames() return value enum up in the header files so that per-architecture implementations can reuse the same return values. Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Signed-off-by: James Morse <james.morse@arm.com> [kees: adjusted naming and commit log] Signed-off-by: Kees Cook <keescook@chromium.org>
2017-03-20x86/arch_prctl: Add ARCH_[GET|SET]_CPUIDKyle Huey
Intel supports faulting on the CPUID instruction beginning with Ivy Bridge. When enabled, the processor will fault on attempts to execute the CPUID instruction with CPL>0. Exposing this feature to userspace will allow a ptracer to trap and emulate the CPUID instruction. When supported, this feature is controlled by toggling bit 0 of MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of https://bugzilla.kernel.org/attachment.cgi?id=243991 Implement a new pair of arch_prctls, available on both x86-32 and x86-64. ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting is enabled (and thus the CPUID instruction is not available) or 1 if CPUID faulting is not enabled. ARCH_SET_CPUID: Set the CPUID state to the second argument. If cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will be deactivated. Returns ENODEV if CPUID faulting is not supported on this system. The state of the CPUID faulting flag is propagated across forks, but reset upon exec. Signed-off-by: Kyle Huey <khuey@kylehuey.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Robert O'Callahan <robert@ocallahan.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jeff Dike <jdike@addtoit.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: user-mode-linux-user@lists.sourceforge.net Cc: David Matlack <dmatlack@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: linux-fsdevel@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-08livepatch/x86: add TIF_PATCH_PENDING thread flagJosh Poimboeuf
Add the TIF_PATCH_PENDING thread flag to enable the new livepatch per-task consistency model for x86_64. The bit getting set indicates the thread has a pending patch which needs to be applied when the thread exits the kernel. The bit is placed in the _TIF_ALLWORK_MASK macro, which results in exit_to_usermode_loop() calling klp_update_patch_state() when it's set. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-08x86/entry: define _TIF_ALLWORK_MASK flags explicitlyJosh Poimboeuf
The _TIF_ALLWORK_MASK macro automatically includes the least-significant 16 bits of the thread_info flags, which is less than obvious and tends to create confusion and surprises when reading or modifying the code. Define the flags explicitly. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-20sched/core, x86: Make struct thread_info arch specific againHeiko Carstens
The following commit: c65eacbe290b ("sched/core: Allow putting thread_info into task_struct") ... made 'struct thread_info' a generic struct with only a single ::flags member, if CONFIG_THREAD_INFO_IN_TASK_STRUCT=y is selected. This change however seems to be quite x86 centric, since at least the generic preemption code (asm-generic/preempt.h) assumes that struct thread_info also has a preempt_count member, which apparently was not true for x86. We could add a bit more #ifdefs to solve this problem too, but it seems to be much simpler to make struct thread_info arch specific again. This also makes the conversion to THREAD_INFO_IN_TASK_STRUCT a bit easier for architectures that have a couple of arch specific stuff in their thread_info definition. The arch specific stuff _could_ be moved to thread_struct. However keeping them in thread_info makes it easier: accessing thread_info members is simple, since it is at the beginning of the task_struct, while the thread_struct is at the end. At least on s390 the offsets needed to access members of the thread_struct (with task_struct as base) are too large for various asm instructions. This is not a problem when keeping these members within thread_info. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: keescook@chromium.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1476901693-8492-2-git-send-email-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-15x86: Move thread_info into task_structAndy Lutomirski
Now that most of the thread_info users have been cleaned up, this is straightforward. Most of this code was written by Linus. Originally-from: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a50eab40abeaec9cb9a9e3cbdeafd32190206654.1473801993.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-15x86/asm: Move the thread_info::status field to thread_structAndy Lutomirski
Because sched.h and thread_info.h are a tangled mess, I turned in_compat_syscall() into a macro. If we had current_thread_struct() or similar and we could use it from thread_info.h, then this would be a bit cleaner. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ccc8a1b2f41f9c264a41f771bb4a6539a642ad72.1473801993.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-24sched/x86: Rewrite the switch_to() codeBrian Gerst
Move the low-level context switch code to an out-of-line asm stub instead of using complex inline asm. This allows constructing a new stack frame for the child process to make it seamlessly flow to ret_from_fork without an extra test and branch in __switch_to(). It also improves code generation for __schedule() by using the C calling convention instead of clobbering all registers. Signed-off-by: Brian Gerst <brgerst@gmail.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471106302-10159-5-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-08Merge tag 'usercopy-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
2016-08-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes and a cleanup-fix, to the syscall entry code and to ptrace" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace x86/ptrace: Stop setting TS_COMPAT in ptrace code x86/vdso: Error out if the vDSO isn't a valid DSO
2016-08-02signal: consolidate {TS,TLF}_RESTORE_SIGMASK codeAndy Lutomirski
In general, there's no need for the "restore sigmask" flag to live in ti->flags. alpha, ia64, microblaze, powerpc, sh, sparc (64-bit only), tile, and x86 use essentially identical alternative implementations, placing the flag in ti->status. Replace those optimized implementations with an equally good common implementation that stores it in a bitfield in struct task_struct and drop the custom implementations. Additional architectures can opt in by removing their TIF_RESTORE_SIGMASK defines. Link: http://lkml.kernel.org/r/8a14321d64a28e40adfddc90e18a96c086a6d6f9.1468522723.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27x86/ptrace: Stop setting TS_COMPAT in ptrace codeAndy Lutomirski
Setting TS_COMPAT in ptrace is wrong: if we happen to do it during syscall entry, then we'll confuse seccomp and audit. (The former isn't a security problem: seccomp is currently entirely insecure if a malicious ptracer is attached.) As a minimal fix, this patch adds a new flag TS_I386_REGS_POKED that handles the ptrace special case. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5383ebed38b39fa37462139e337aff7f2314d1ca.1469599803.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 23:42:18 +0000