summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/hyperv.h
AgeCommit message (Collapse)Author
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499Thomas Gleixner
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 see the copying file in the top level directory extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUIDVitaly Kuznetsov
With every new Hyper-V Enlightenment we implement we're forced to add a KVM_CAP_HYPERV_* capability. While this approach works it is fairly inconvenient: the majority of the enlightenments we do have corresponding CPUID feature bit(s) and userspace has to know this anyways to be able to expose the feature to the guest. Add KVM_GET_SUPPORTED_HV_CPUID ioctl (backed by KVM_CAP_HYPERV_CPUID, "one cap to rule them all!") returning all Hyper-V CPUID feature leaves. Using the existing KVM_GET_SUPPORTED_CPUID doesn't seem to be possible: Hyper-V CPUID feature leaves intersect with KVM's (e.g. 0x40000000, 0x40000001) and we would probably confuse userspace in case we decide to return these twice. KVM_CAP_HYPERV_CPUID's number is interim: we're intended to drop KVM_CAP_HYPERV_STIMER_DIRECT and use its number instead. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14KVM: x86: Add requisite includes to hyperv.hSean Christopherson
Until this point vmx.c has been the only consumer and included the file after many others. Prepare for multiple consumers, i.e. the shattering of vmx.c Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17KVM: hyperv: define VP assist page helpersLadi Prosek
The state related to the VP assist page is still managed by the LAPIC code in the pv_eoi field. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06KVM: x86: ensure all MSRs can always be KVM_GET/SET_MSR'dPaolo Bonzini
Some of the MSRs returned by GET_MSR_INDEX_LIST currently cannot be sent back to KVM_GET_MSR and/or KVM_SET_MSR; either they can never be sent back, or you they are only accepted under special conditions. This makes the API a pain to use. To avoid this pain, this patch makes it so that the result of the get-list ioctl can always be used for host-initiated get and set. Since we don't have a separate way to check for read-only MSRs, this means some Hyper-V MSRs are ignored when written. Arguably they should not even be in the result of GET_MSR_INDEX_LIST, but I am leaving there in case userspace is using the outcome of GET_MSR_INDEX_LIST to derive the support for the corresponding Hyper-V feature. Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06kvm: x86: hyperv: guest->host event signaling via eventfdRoman Kagan
In Hyper-V, the fast guest->host notification mechanism is the SIGNAL_EVENT hypercall, with a single parameter of the connection ID to signal. Currently this hypercall incurs a user exit and requires the userspace to decode the parameters and trigger the notification of the potentially different I/O context. To avoid the costly user exit, process this hypercall and signal the corresponding eventfd in KVM, similar to ioeventfd. The association between the connection id and the eventfd is established via the newly introduced KVM_HYPERV_EVENTFD ioctl, and maintained in an (srcu-protected) IDR. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Reviewed-by: David Hildenbrand <david@redhat.com> [asm/hyperv.h changes approved by KY Srinivasan. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-06kvm: x86: factor out kvm.arch.hyperv (de)initRoman Kagan
Move kvm.arch.hyperv initialization and cleanup to separate functions. For now only a mutex is inited in the former, and the latter is empty; more stuff will go in there in a followup patch. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14kvm: x86: hyperv: make VP_INDEX managed by userspaceRoman Kagan
Hyper-V identifies vCPUs by Virtual Processor Index, which can be queried via HV_X64_MSR_VP_INDEX msr. It is defined by the spec as a sequential number which can't exceed the maximum number of vCPUs per VM. APIC ids can be sparse and thus aren't a valid replacement for VP indices. Current KVM uses its internal vcpu index as VP_INDEX. However, to make it predictable and persistent across VM migrations, the userspace has to control the value of VP_INDEX. This patch achieves that, by storing vp_index explicitly on vcpu, and allowing HV_X64_MSR_VP_INDEX to be set from the host side. For compatibility it's initialized to KVM vcpu index. Also a few variables are renamed to make clear distinction betweed this Hyper-V vp_index and KVM vcpu_id (== APIC id). Besides, a new capability, KVM_CAP_HYPERV_VP_INDEX, is added to allow the userspace to skip attempting msr writes where unsupported, to avoid spamming error logs. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-13kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2Roman Kagan
There is a flaw in the Hyper-V SynIC implementation in KVM: when message page or event flags page is enabled by setting the corresponding msr, KVM zeroes it out. This is problematic because on migration the corresponding MSRs are loaded on the destination, so the content of those pages is lost. This went unnoticed so far because the only user of those pages was in-KVM hyperv synic timers, which could continue working despite that zeroing. Newer QEMU uses those pages for Hyper-V VMBus implementation, and zeroing them breaks the migration. Besides, in newer QEMU the content of those pages is fully managed by QEMU, so zeroing them is undesirable even when writing the MSRs from the guest side. To support this new scheme, introduce a new capability, KVM_CAP_HYPERV_SYNIC2, which, when enabled, makes sure that the synic pages aren't zeroed out in KVM. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-09-20KVM: x86: Hyper-V tsc page setupPaolo Bonzini
Lately tsc page was implemented but filled with empty values. This patch setup tsc page scale and offset based on vcpu tsc, tsc_khz and HV_X64_MSR_TIME_REF_COUNT value. The valid tsc page drops HV_X64_MSR_TIME_REF_COUNT msr reads count to zero which potentially improves performance. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Peter Hornyack <peterhornyack@google.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> [Computation of TSC page parameters rewritten to use the Linux timekeeper parameters. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-16kvm/x86: Hyper-V SynIC timersAndrey Smetanin
Per Hyper-V specification (and as required by Hyper-V-aware guests), SynIC provides 4 per-vCPU timers. Each timer is programmed via a pair of MSRs, and signals expiration by delivering a special format message to the configured SynIC message slot and triggering the corresponding synthetic interrupt. Note: as implemented by this patch, all periodic timers are "lazy" (i.e. if the vCPU wasn't scheduled for more than the timer period the timer events are lost), regardless of the corresponding configuration MSR. If deemed necessary, the "catch up" mode (the timer period is shortened until the timer catches up) will be implemented later. Changes v2: * Use remainder to calculate periodic timer expiration time Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-16kvm/x86: Added Hyper-V vcpu_to_hv_vcpu()/hv_vcpu_to_vcpu() helpersAndrey Smetanin
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-16kvm/x86: Rearrange func's declarations inside Hyper-V headerAndrey Smetanin
This rearrangement places functions declarations together according to their functionality, so future additions will be simplier. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25kvm/x86: Hyper-V synthetic interrupt controllerAndrey Smetanin
SynIC (synthetic interrupt controller) is a lapic extension, which is controlled via MSRs and maintains for each vCPU - 16 synthetic interrupt "lines" (SINT's); each can be configured to trigger a specific interrupt vector optionally with auto-EOI semantics - a message page in the guest memory with 16 256-byte per-SINT message slots - an event flag page in the guest memory with 16 2048-bit per-SINT event flag areas The host triggers a SINT whenever it delivers a new message to the corresponding slot or flips an event flag bit in the corresponding area. The guest informs the host that it can try delivering a message by explicitly asserting EOI in lapic or writing to End-Of-Message (EOM) MSR. The userspace (qemu) triggers interrupts and receives EOM notifications via irqfd with resampler; for that, a GSI is allocated for each configured SINT, and irq_routing api is extended to support GSI-SINT mapping. Changes v4: * added activation of SynIC by vcpu KVM_ENABLE_CAP * added per SynIC active flag * added deactivation of APICv upon SynIC activation Changes v3: * added KVM_CAP_HYPERV_SYNIC and KVM_IRQ_ROUTING_HV_SINT notes into docs Changes v2: * do not use posted interrupts for Hyper-V SynIC AutoEOI vectors * add Hyper-V SynIC vectors into EOI exit bitmap * Hyper-V SyniIC SINT msr write logic simplified Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-23kvm/x86: added hyper-v crash msrs into kvm hyperv contextAndrey Smetanin
Added kvm Hyper-V context hv crash variables as storage of Hyper-V crash msrs. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Peter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-23kvm/x86: move Hyper-V MSR's/hypercall code into hyperv.c fileAndrey Smetanin
This patch introduce Hyper-V related source code file - hyperv.c and per vm and per vcpu hyperv context structures. All Hyper-V MSR's and hypercall code moved into hyperv.c. All Hyper-V kvm/vcpu fields moved into appropriate hyperv context structures. Copyrights and authors information copied from x86.c to hyperv.c. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Peter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>