summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2022-02-23arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610Christian Hewitt
[ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ] The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-g12: add ATF BL32 reserved-memory regionChristian Hewitt
[ Upstream commit 08982a1b3aa2611c9c711d24825c9002d28536f4 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-gx: add ATF BL32 reserved-memory regionChristian Hewitt
[ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_ofYe Guojin
[ Upstream commit 34596ba380b03d181e24efd50e2f21045bde3696 ] This was found by coccicheck: ./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function. Move the put_device() call before the if judgment. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ARM: OMAP2+: hwmod: Add of_node_put() before breakWan Jiabing
[ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAWJim Mattson
[ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf eventJim Mattson
[ Upstream commit b8bfee85f1307426e0242d654f3a14c06ef639c5 ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't drop the high nybble when setting up the config field of a perf_event_attr structure for a call to perf_event_create_kernel_counter(). Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-1-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: x86/pmu: Refactoring find_arch_event() to pmc_perf_hw_id()Like Xu
[ Upstream commit 7c174f305cbee6bdba5018aae02b84369e7ab995 ] The find_arch_event() returns a "unsigned int" value, which is used by the pmc_reprogram_counter() to program a PERF_TYPE_HARDWARE type perf_event. The returned value is actually the kernel defined generic perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler incoming parameters for better self-explanation. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-3-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: SVM: Never reject emulation due to SMAP errata for !SEV guestsSean Christopherson
commit 55467fcd55b89c622e62b4afe60ac0eb2fae91f2 upstream. Always signal that emulation is possible for !SEV guests regardless of whether or not the CPU provided a valid instruction byte stream. KVM can read all guest state (memory and registers) for !SEV guests, i.e. can fetch the code stream from memory even if the CPU failed to do so because of the SMAP errata. Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [jwang: adjust context for kernel 5.10.101] Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23powerpc/lib/sstep: fix 'ptesync' build errorAnders Roxell
commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23x86/Xen: streamline (and fix) PV CPU enumerationJan Beulich
[ Upstream commit e25a8d959992f61b64a58fc62fb7951dc6f31d1f ] This started out with me noticing that "dom0_max_vcpus=<N>" with <N> larger than the number of physical CPUs reported through ACPI tables would not bring up the "excess" vCPU-s. Addressing this is the primary purpose of the change; CPU maps handling is being tidied only as far as is necessary for the change here (with the effect of also avoiding the setting up of too much per-CPU infrastructure, i.e. for CPUs which can never come online). Noticing that xen_fill_possible_map() is called way too early, whereas xen_filter_cpu_maps() is called too late (after per-CPU areas were already set up), and further observing that each of the functions serves only one of Dom0 or DomU, it looked like it was better to simplify this. Use the .get_smp_config hook instead, uniformly for Dom0 and DomU. xen_fill_possible_map() can be dropped altogether, while xen_filter_cpu_maps() is re-purposed but not otherwise changed. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()Andy Shevchenko
commit 18a1d5e1945385d9b5adc3fe11427ce4a9d2826e upstream. It's a followup to the previous commit f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of the job. Add the rest, so we won't get a new kernel test robot reports. Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23parisc: Drop __init from map_pages declarationJohn David Anglin
commit 9129886b88185962538180625ca8051362b01327 upstream. With huge kernel pages, we randomly eat a SPARC in map_pages(). This is fixed by dropping __init from the declaration. However, map_pages references the __init routine memblock_alloc_try_nid via memblock_alloc. Thus, it needs to be marked with __ref. memblock_alloc is only called before the kernel text is set to readonly. The __ref on free_initmem is no longer needed. Comment regarding map_pages being in the init section is removed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23Revert "svm: Add warning message for AVIC IPI invalid target"Sean Christopherson
commit dd4589eee99db8f61f7b8f7df1531cad3f74a64d upstream. Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial to trigger from guest as it will fail on any destination APIC ID that doesn't exist from the guest's perspective. Don't bother recording anything in the kernel log, the common tracepoint for kvm_avic_incomplete_ipi() is sufficient for debugging. This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220204214205.3306634-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16arm64: dts: imx8mq: fix lcdif port nodeAlexander Stein
commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream. The port node does not have a unit-address, remove it. This fixes the warnings: lcd-controller@30320000: 'port' is a required property lcd-controller@30320000: 'port@0' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'Dongjin Kim
[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ] Typo in audio amplifier node, dioo2133 -> dio2133 Signed-off-by: Dongjin Kim <tobetter@gmail.com> Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi") Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typoRob Herring
[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ] The correct property name is 'assigned-clock-parents', not 'assigned-clocks-parents'. Though if the platform works with the typo, one has to wonder if the property is even needed. Signed-off-by: Rob Herring <robh@kernel.org> Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: imx6qdl-udoo: Properly describe the SD card detectFabio Estevam
[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ] GPIO7_IO00 is used as SD card detect. Properly describe this in the devicetree. Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson8b: Fix the UART device-tree schema validationMartin Blumenstingl
[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8b-uart", "amlogic,meson-ao-uart" - "amlogic,meson8b-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml bindings. Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson8: Fix the UART device-tree schema validationMartin Blumenstingl
[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8-uart", "amlogic,meson-ao-uart" - "amlogic,meson8-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml schema. Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson: Fix the UART compatible stringsMartin Blumenstingl
[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ] The dt-bindings for the UART controller only allow the following values for Meson6 SoCs: - "amlogic,meson6-uart", "amlogic,meson-ao-uart" - "amlogic,meson6-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: Fix timer regression for beagleboard revision cTony Lindgren
[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ] Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: socfpga: fix missing RESET_CONTROLLERKrzysztof Kozlowski
commit 3037b174b1876aae6b2d1a27a878c681c78ccadc upstream. The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA") uses reset controller, so it should select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER is not enough because it affects only default choice still allowing a non-buildable configuration: /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq': arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init' Reported-by: kernel test robot <lkp@intel.com> Cc: <stable@vger.kernel.org> Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16ARM: dts: Fix boot regression on SkomerLinus Walleij
commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream. The signal routing on the Skomer board was incorrect making it impossible to mount root from the SD card. Fix this up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Cc: Stefan Hansson <newbyte@disroot.org> Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog groupFabio Estevam
commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream. Currently, SD card fails to mount due to the following pinctrl error: [ 11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi [ 11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22 [ 11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0 on device 80018000.pinctrl [ 11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it is already been used by the mmc0-pins-fixup pinctrl group. With this change the rootfs can be mounted and the imx23-evk board can boot successfully. Cc: <stable@vger.kernel.org> Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16riscv: fix build with binutils 2.38Aurelien Jarno
commit 6df2a016c0c8a3d0933ef33dd192ea6606b115e3 upstream. From version 2.38, binutils default to ISA spec version 20191213. This means that the csr read/write (csrr*/csrw*) instructions and fence.i instruction has separated from the `I` extension, become two standalone extensions: Zicsr and Zifencei. As the kernel uses those instruction, this causes the following build failure: CC arch/riscv/kernel/vdso/vgettimeofday.o <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages: <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01' The fix is to specify those extensions explicitely in -march. However as older binutils version do not support this, we first need to detect that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadowSean Christopherson
[ Upstream commit b9bed78e2fa9571b7c983b20666efa0009030c71 ] Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or MOVSS blocking is active. Setting the flag is necessary to make VM-Entry consistency checks happy, as VMX has an invariant that if RFLAGS.TF is set and STI/MOVSS blocking is true, then the previous instruction must have been STI or MOV/POP, and therefore a single-step #DB must be pending since the RFLAGS.TF cannot have been set by the previous instruction, i.e. the one instruction delay after setting RFLAGS.TF must have already expired. Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately when recording guest state as part of a VM-Exit, but #DB VM-Exits intentionally do not treat the #DB as "guest state" as interception of the #DB effectively makes the #DB host-owned, thus KVM needs to manually set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest. Note, although this bug can be triggered by guest userspace, doing so requires IOPL=3, and guest userspace running with IOPL=3 has full access to all I/O ports (from the guest's perspective) and can crash/reboot the guest any number of ways. IOPL=3 is required because STI blocking kicks in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF. MOVSS blocking can be initiated by userspace, but can be coincident with a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is executed in the MOVSS shadow. MOV DR #GPs at CPL>0, thus MOVSS blocking is problematic only for CPL0 (and only if the guest is crazy enough to access a DR in a MOVSS shadow). All other sources of #DBs are either suppressed by MOVSS blocking (single-step, code fetch, data, and I/O), are mutually exclusive with MOVSS blocking (T-bit task switch), or are already handled by KVM (ICEBP, a.k.a. INT1). This bug was originally found by running tests[1] created for XSA-308[2]. Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is presumably why the Xen bug was deemed to be an exploitable DOS from guest userspace. KVM already handles ICEBP by skipping the ICEBP instruction and thus clears MOVSS blocking as a side effect of its "emulation". [1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html [2] https://xenbits.xen.org/xsa/advisory-308.html Reported-by: David Woodhouse <dwmw2@infradead.org> Reported-by: Alexander Graf <graf@amazon.de> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220120000624.655815-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermodeSean Christopherson
[ Upstream commit cdf85e0c5dc766fc7fc779466280e454a6d04f87 ] Inject a #GP instead of synthesizing triple fault to try to avoid killing the guest if emulation of an SEV guest fails due to encountering the SMAP erratum. The injected #GP may still be fatal to the guest, e.g. if the userspace process is providing critical functionality, but KVM should make every attempt to keep the guest alive. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCSVitaly Kuznetsov
[ Upstream commit f80ae0ef089a09e8c18da43a382c3caac9a424a7 ] Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS, MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair, MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely on 'true' MSR data. Note, none of the currently existing Windows/Hyper-V versions are known to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change is aimed at making the filtering future proof. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMERVitaly Kuznetsov
[ Upstream commit 7a601e2cf61558dfd534a9ecaad09f5853ad8204 ] Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field, PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too. Note, none of the currently existing Windows/Hyper-V versions are known to enable 'save VMX-preemption timer value' when eVMCS is in use, the change is aimed at making the filtering future proof. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16powerpc/fixmap: Fix VM debug warning on unmapChristophe Leroy
[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ] Unmapping a fixmap entry is done by calling __set_fixmap() with FIXMAP_PAGE_CLEAR as flags. Today, powerpc __set_fixmap() calls map_kernel_page(). map_kernel_page() is not happy when called a second time for the same page. WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8 CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682 NIP: c0017cd4 LR: c00187f0 CTR: 00000010 REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000 GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000 NIP [c0017cd4] set_pte_at+0xc/0x1e8 LR [c00187f0] map_kernel_page+0x9c/0x100 Call Trace: [e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable) [e1011e30] [c0165fec] __set_fixmap+0x30/0x44 [e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170 [e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0 [e1011e90] [c0c03634] do_one_initcall+0x80/0x178 [e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250 [e1011f20] [c0007e34] kernel_init+0x24/0x140 [e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010 4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030 Implement unmap_kernel_page() which clears an existing pte. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16x86/perf: Avoid warning for Arch LBR without XSAVEAndi Kleen
[ Upstream commit 8c16dc047b5dd8f7b3bf4584fa75733ea0dde7dc ] Some hypervisors support Arch LBR, but without the LBR XSAVE support. The current Arch LBR init code prints a warning when the xsave size (0) is unexpected. Avoid printing the warning for the "no LBR XSAVE" case. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211215204029.150686-1-ak@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-11KVM: s390: Return error on SIDA memop on normal guestJanis Schoetterl-Glausch
commit 2c212e1baedcd782b2535a3f86bc491977677c0e upstream. Refuse SIDA memops on guests which are not protected. For normal guests, the secure instruction data address designation, which determines the location we access, is not under control of KVM. Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08x86/perf: Default set FREEZE_ON_SMI for allPeter Zijlstra
commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream. Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3. Since this is a privilege violation, default disable SMM visibility where possible. Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file. [0] https://rr-project.org/ [1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5. Reported-by: Kyle Huey <me@kylehuey.com> Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08perf/x86/intel/pt: Fix crash with stop filters in single-range modeTristan Hume
commit 1d9093457b243061a9bba23543c38726e864a643 upstream. Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume <tristan@thume.ca> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPINTony Luck
commit e464121f2d40eabc7d11823fb26db807ce945df4 upstream. Missed adding the Icelake-D CPU to the list. It uses the same MSRs to control and read the inventory number as all the other models. Fixes: dc6b025de95b ("x86/mce: Add Xeon Icelake to list of CPUs that support PPIN") Reported-by: Ailin Xu <ailin.xu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220121174743.1875294-2-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05x86/mce: Add Xeon Sapphire Rapids to list of CPUs that support PPINTony Luck
commit a331f5fdd36dba1ffb0239a4dfaaf1df91ff1aab upstream. New CPU model, same MSRs to control and read the inventory number. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210319173919.291428-1-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05KVM: x86: Forcibly leave nested virt when SMM state is toggledSean Christopherson
commit f7e570780efc5cec9b2ed1e0472a7da14e864fdb upstream. Forcibly leave nested virtualization operation if userspace toggles SMM state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace forces the vCPU out of SMM while it's post-VMXON and then injects an SMI, vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both vmxon=false and smm.vmxon=false, but all other nVMX state allocated. Don't attempt to gracefully handle the transition as (a) most transitions are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't sufficient information to handle all transitions, e.g. SVM wants access to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede KVM_SET_NESTED_STATE during state restore as the latter disallows putting the vCPU into L2 if SMM is active, and disallows tagging the vCPU as being post-VMXON in SMM if SMM is not active. Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU in an architecturally impossible state. WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Modules linked in: CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00 Call Trace: <TASK> kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460 kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline] kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline] kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250 kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273 __fput+0x286/0x9f0 fs/file_table.c:311 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xb29/0x2a30 kernel/exit.c:806 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 get_signal+0x4b0/0x28c0 kernel/signal.c:2862 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Cc: stable@vger.kernel.org Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125220358.2091737-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Backported-by: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if ↵Athira Rajeev
PMI is pending [ Upstream commit fb6433b48a178d4672cb26632454ee0b21056eaa ] Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122033429.25395-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06Naveen N. Rao
[ Upstream commit 3f5f766d5f7f95a69a630da3544a1a0cee1cdddf ] Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc/32: Fix boot failure with GCC latent entropy pluginChristophe Leroy
commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Fix kasan_init_region() for KASANChristophe Leroy
commit d37823c3528e5e0705fc7746bcbc2afffb619259 upstream. It has been reported some configuration where the kernel doesn't boot with KASAN enabled. This is due to wrong BAT allocation for the KASAN area: ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m 3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m 4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m A BAT must have both virtual and physical addresses alignment matching the size of the BAT. This is not the case for BAT 4 above. Fix kasan_init_region() by using block_size() function that is in book3s32/mmu.c. To be able to reuse it here, make it non static and change its name to bat_block_size() in order to avoid name conflict with block_size() defined in <linux/blkdev.h> Also reuse find_free_bat() to avoid an error message from setbat() when no BAT is available. And allocate memory outside of linear memory mapping to avoid wasting that precious space. With this change we get correct alignment for BATs and KASAN shadow memory is allocated outside the linear memory space. ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw 3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw 4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()") Cc: stable@vger.kernel.org Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATsChristophe Leroy
commit 37eb7ca91b692e8e49e7dd50158349a6c8fb5b09 upstream. Today we have the following IBATs allocated: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m 5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m 6: - 7: - The two 128K should be a single 256K instead. When _etext is not aligned to 128Kbytes, the system will allocate all necessary BATs to the lower 128Kbytes boundary, then allocate an additional 128Kbytes BAT for the remaining block. Instead, align the top to 128Kbytes so that the function directly allocates a 256Kbytes last block: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m 5: - 6: - 7: - Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01x86/MCE/AMD: Allow thresholding interface updates after initYazen Ghannam
commit 1f52b0aba6fd37653416375cb8a1ca673acf8d5f upstream. Changes to the AMD Thresholding sysfs code prevents sysfs writes from updating the underlying registers once CPU init is completed, i.e. "threshold_banks" is set. Allow the registers to be updated if the thresholding interface is already initialized or if in the init path. Use the "set_lvt_off" value to indicate if running in the init path, since this value is only set during init. Fixes: a037f3ca0ea0 ("x86/mce/amd: Make threshold bank setting hotplug robust") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220117161328.19148-1-yazen.ghannam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01arm64: errata: Fix exec handling in erratum 1418040 workaroundD Scott Phillips
commit 38e0257e0e6f4fef2aa2966b089b56a8b1cfb75c upstream. The erratum 1418040 workaround enables CNTVCT_EL1 access trapping in EL0 when executing compat threads. The workaround is applied when switching between tasks, but the need for the workaround could also change at an exec(), when a non-compat task execs a compat binary or vice versa. Apply the workaround in arch_setup_new_exec(). This leaves a small window of time between SET_PERSONALITY and arch_setup_new_exec where preemption could occur and confuse the old workaround logic that compares TIF_32BIT between prev and next. Instead, we can just read cntkctl to make sure it's in the state that the next task needs. I measured cntkctl read time to be about the same as a mov from a general-purpose register on N1. Update the workaround logic to examine the current value of cntkctl instead of the previous task's compat state. Fixes: d49f7d7376d0 ("arm64: Move handling of erratum 1418040 into C code") Cc: <stable@vger.kernel.org> # 5.9.x Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211220234114.3926-1-scott@os.amperecomputing.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSSLike Xu
commit 4c282e51e4450b94680d6ca3b10f830483b1f243 upstream. Do a runtime CPUID update for a vCPU if MSR_IA32_XSS is written, as the size in bytes of the XSAVE area is affected by the states enabled in XSS. Fixes: 203000993de5 ("kvm: vmx: add MSR logic for XSAVES") Cc: stable@vger.kernel.org Signed-off-by: Like Xu <likexu@tencent.com> [sean: split out as a separate patch, adjust Fixes tag] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220126172226.2298529-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01perf/x86/intel/uncore: Fix CAS_COUNT_WRITE issue for ICXZhengjun Xing
commit 96fd2e89fba1aaada6f4b1e5d25a9d9ecbe1943d upstream. The user recently report a perf issue in the ICX platform, when test by perf event “uncore_imc_x/cas_count_write”,the write bandwidth is always very small (only 0.38MB/s), it is caused by the wrong "umask" for the "cas_count_write" event. When double-checking, find "cas_count_read" also is wrong. The public document for ICX uncore: 3rd Gen Intel® Xeon® Processor Scalable Family, Codename Ice Lake,Uncore Performance Monitoring Reference Manual, Revision 1.00, May 2021 On 2.4.7, it defines Unit Masks for CAS_COUNT: RD b00001111 WR b00110000 So corrected both "cas_count_read" and "cas_count_write" for ICX. Old settings: hswep_uncore_imc_events INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x03") INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x0c") New settings: snr_uncore_imc_events INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x0f") INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x30") Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support") Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211223144826.841267-1-zhengjun.xing@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01Revert "KVM: SVM: avoid infinite loop on NPF from bad address"Sean Christopherson
commit 31c25585695abdf03d6160aa6d829e855b256329 upstream. Revert a completely broken check on an "invalid" RIP in SVM's workaround for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously expects a gfn, i.e. operates in the guest physical address space, whereas RIP is a virtual (not even linear) address. The "fix" worked for the problematic KVM selftest because the test identity mapped RIP. Fully revert the hack instead of trying to translate RIP to a GPA, as the non-SEV case is now handled earlier, and KVM cannot access guest page tables to translate RIP. This reverts commit e72436bc3a5206f95bb384e741154166ddb3202e. Fixes: e72436bc3a52 ("KVM: SVM: avoid infinite loop on NPF from bad address") Reported-by: Liam Merwick <liam.merwick@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/hypfs: include z/VM guests with access control group setVasily Gorbik
commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream. Currently if z/VM guest is allowed to retrieve hypervisor performance data globally for all guests (privilege class B) the query is formed in a way to include all guests but the group name is left empty. This leads to that z/VM guests which have access control group set not being included in the results (even local vm). Change the query group identifier from empty to "any" to retrieve information about all guests from any groups (or without a group set). Cc: stable@vger.kernel.org Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/module: fix loading modules with a lot of relocationsIlya Leoshkevich
commit f3b7e73b2c6619884351a3a0a7468642f852b8a2 upstream. If the size of the PLT entries generated by apply_rela() exceeds 64KiB, the first ones can no longer reach __jump_r1 with brc. Fix by using brcl. An alternative solution is to add a __jump_r1 copy after every 64KiB, however, the space savings are quite small and do not justify the additional complexity. Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Cc: stable@vger.kernel.org Reported-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 04:58:28 +0000