summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2022-02-11KVM: s390: Return error on SIDA memop on normal guestJanis Schoetterl-Glausch
commit 2c212e1baedcd782b2535a3f86bc491977677c0e upstream. Refuse SIDA memops on guests which are not protected. For normal guests, the secure instruction data address designation, which determines the location we access, is not under control of KVM. Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08x86/perf: Default set FREEZE_ON_SMI for allPeter Zijlstra
commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream. Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3. Since this is a privilege violation, default disable SMM visibility where possible. Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file. [0] https://rr-project.org/ [1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5. Reported-by: Kyle Huey <me@kylehuey.com> Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08perf/x86/intel/pt: Fix crash with stop filters in single-range modeTristan Hume
commit 1d9093457b243061a9bba23543c38726e864a643 upstream. Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume <tristan@thume.ca> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08kvm/arm64: rework guest entry logicMark Rutland
[ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ] In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmasked IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_arm_enter_exit_vcpu() helper which is marked noinstr. Fixes: 1b3d546daf85ed2b ("arm/arm64: KVM: Properly account for guest CPU time") Reported-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Message-Id: <20220201132926.3301912-3-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08arm64: Add Cortex-A510 CPU part definitionAnshuman Khandual
commit 53960faf2b731dd2f9ed6e1334634b8ba6286850 upstream. Add the CPU Partnumbers for the new Arm designs. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1643120437-14352-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occursJames Morse
commit 1229630af88620f6e3a621a1ebd1ca14d9340df7 upstream. Prior to commit defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP"), when an SError is synchronised due to another exception, KVM handles the SError first. If the guest survives, the instruction that triggered the original exception is re-exectued to handle the first exception. HVC is treated as a special case as the instruction wouldn't normally be re-exectued, as its not a trap. Commit defe21f49bc9 didn't preserve the behaviour of the 'return 1' that skips the rest of handle_exit(). Since commit defe21f49bc9, KVM will try to handle the SError and the original exception at the same time. When the exception was an HVC, fixup_guest_exit() has already rolled back ELR_EL2, meaning if the guest has virtual SError masked, it will execute and handle the HVC twice. Restore the original behaviour. Fixes: defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127122052.1584324-4-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08KVM: arm64: Avoid consuming a stale esr value when SError occurJames Morse
commit 1c71dbc8a179d99dd9bb7e7fc1888db613cf85de upstream. When any exception other than an IRQ occurs, the CPU updates the ESR_EL2 register with the exception syndrome. An SError may also become pending, and will be synchronised by KVM. KVM notes the exception type, and whether an SError was synchronised in exit_code. When an exception other than an IRQ occurs, fixup_guest_exit() updates vcpu->arch.fault.esr_el2 from the hardware register. When an SError was synchronised, the vcpu esr value is used to determine if the exception was due to an HVC. If so, ELR_EL2 is moved back one instruction. This is so that KVM can process the SError first, and re-execute the HVC if the guest survives the SError. But if an IRQ synchronises an SError, the vcpu's esr value is stale. If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2, causing an unrelated guest instruction to be executed twice. Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't update this register so don't need to check. Fixes: defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP") Cc: stable@vger.kernel.org Reported-by: Steven Price <steven.price@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127122052.1584324-3-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RISC-V: KVM: make CY, TM, and IR counters accessible in VU modeMayuresh Chitale
commit de1d7b6a51dab546160d252e47baa54adf104d4a upstream. Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR. To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI). Fixes: a33c72faf2d73 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Cc: stable@vger.kernel.org Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: nVMX: Allow VMREAD when Enlightened VMCS is in useVitaly Kuznetsov
commit 6cbbaab60ff33f59355492c241318046befd9ffc upstream. Hyper-V TLFS explicitly forbids VMREAD and VMWRITE instructions when Enlightened VMCS interface is in use: "Any VMREAD or VMWRITE instructions while an enlightened VMCS is active is unsupported and can result in unexpected behavior."" Windows 11 + WSL2 seems to ignore this, attempts to VMREAD VMCS field 0x4404 ("VM-exit interruption information") are observed. Failing these attempts with nested_vmx_failInvalid() makes such guests unbootable. Microsoft confirms this is a Hyper-V bug and claims that it'll get fixed eventually but for the time being we need a workaround. (Temporary) allow VMREAD to get data from the currently loaded Enlightened VMCS. Note: VMWRITE instructions remain forbidden, it is not clear how to handle them properly and hopefully won't ever be needed. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()Vitaly Kuznetsov
commit 892a42c10ddb945d3a4dcf07dccdf9cb98b21548 upstream. In preparation to allowing reads from Enlightened VMCS from handle_vmread(), implement evmcs_field_offset() to get the correct read offset. get_evmcs_offset(), which is being used by KVM-on-Hyper-V, is almost what's needed but a few things need to be adjusted. First, WARN_ON() is unacceptable for handle_vmread() as any field can (in theory) be supplied by the guest and not all fields are defined in eVMCS v1. Second, we need to handle 'holes' in eVMCS (missing fields). It also sounds like a good idea to WARN_ON() if such fields are ever accessed by KVM-on-Hyper-V. Implement dedicated evmcs_field_offset() helper. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: nVMX: Rename vmcs_to_field_offset{,_table}Vitaly Kuznetsov
commit 2423a4c0d17418eca1ba1e3f48684cb2ab7523d5 upstream. vmcs_to_field_offset{,_table} may sound misleading as VMCS is an opaque blob which is not supposed to be accessed directly. In fact, vmcs_to_field_offset{,_table} are related to KVM defined VMCS12 structure. Rename vmcs_field_to_offset() to get_vmcs12_field_offset() for clarity. No functional change intended. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if ↵Athira Rajeev
PMI is pending [ Upstream commit fb6433b48a178d4672cb26632454ee0b21056eaa ] Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122033429.25395-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc/64s: Mask SRR0 before checking against the masked NIPNicholas Piggin
[ Upstream commit aee101d7b95a03078945681dd7f7ea5e4a1e7686 ] Commit 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against SRR0") masked off the low 2 bits of the NIP value in the interrupt stack frame in case they are non-zero and mis-compare against a SRR0 register value of a CPU which always reads back 0 from the 2 low bits which are reserved. This now causes the opposite problem that an implementation which does implement those bits in SRR0 will mis-compare against the masked NIP value in which they have been cleared. QEMU is one such implementation, and this is allowed by the architecture. This can be triggered by sigfuz by setting low bits of PT_NIP in the signal context. Fix this for now by masking the SRR0 bits as well. Cleaner is probably to sanitise these values before putting them in registers or stack, but this is the quick and backportable fix. Fixes: 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against SRR0") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220117134403.2995059-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06Naveen N. Rao
[ Upstream commit 3f5f766d5f7f95a69a630da3544a1a0cee1cdddf ] Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01KVM: arm64: pkvm: Use the mm_ops indirection for cache maintenanceMarc Zyngier
[ Upstream commit 094d00f8ca58c5d29b25e23b4daaed1ff1f13b41 ] CMOs issued from EL2 cannot directly use the kernel helpers, as EL2 doesn't have a mapping of the guest pages. Oops. Instead, use the mm_ops indirection to use helpers that will perform a mapping at EL2 and allow the CMO to be effective. Fixes: 25aa28691bb9 ("KVM: arm64: Move guest CMOs to the fault handlers") Reviewed-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220114125038.1336965-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01ARM: 9170/1: fix panic when kasan and kprobe are enabledsparkhuang
commit 8b59b0a53c840921b625378f137e88adfa87647e upstream. arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df43283 ("ARM kprobes: instruction single-stepping support") Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32: Fix boot failure with GCC latent entropy pluginChristophe Leroy
commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Fix kasan_init_region() for KASANChristophe Leroy
commit d37823c3528e5e0705fc7746bcbc2afffb619259 upstream. It has been reported some configuration where the kernel doesn't boot with KASAN enabled. This is due to wrong BAT allocation for the KASAN area: ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m 3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m 4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m A BAT must have both virtual and physical addresses alignment matching the size of the BAT. This is not the case for BAT 4 above. Fix kasan_init_region() by using block_size() function that is in book3s32/mmu.c. To be able to reuse it here, make it non static and change its name to bat_block_size() in order to avoid name conflict with block_size() defined in <linux/blkdev.h> Also reuse find_free_bat() to avoid an error message from setbat() when no BAT is available. And allocate memory outside of linear memory mapping to avoid wasting that precious space. With this change we get correct alignment for BATs and KASAN shadow memory is allocated outside the linear memory space. ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw 3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw 4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()") Cc: stable@vger.kernel.org Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATsChristophe Leroy
commit 37eb7ca91b692e8e49e7dd50158349a6c8fb5b09 upstream. Today we have the following IBATs allocated: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m 5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m 6: - 7: - The two 128K should be a single 256K instead. When _etext is not aligned to 128Kbytes, the system will allocate all necessary BATs to the lower 128Kbytes boundary, then allocate an additional 128Kbytes BAT for the remaining block. Instead, align the top to 128Kbytes so that the function directly allocates a 256Kbytes last block: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m 5: - 6: - 7: - Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPINTony Luck
commit e464121f2d40eabc7d11823fb26db807ce945df4 upstream. Missed adding the Icelake-D CPU to the list. It uses the same MSRs to control and read the inventory number as all the other models. Fixes: dc6b025de95b ("x86/mce: Add Xeon Icelake to list of CPUs that support PPIN") Reported-by: Ailin Xu <ailin.xu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220121174743.1875294-2-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01x86/MCE/AMD: Allow thresholding interface updates after initYazen Ghannam
commit 1f52b0aba6fd37653416375cb8a1ca673acf8d5f upstream. Changes to the AMD Thresholding sysfs code prevents sysfs writes from updating the underlying registers once CPU init is completed, i.e. "threshold_banks" is set. Allow the registers to be updated if the thresholding interface is already initialized or if in the init path. Use the "set_lvt_off" value to indicate if running in the init path, since this value is only set during init. Fixes: a037f3ca0ea0 ("x86/mce/amd: Make threshold bank setting hotplug robust") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220117161328.19148-1-yazen.ghannam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01PCI/sysfs: Find shadow ROM before static attribute initializationBjorn Helgaas
commit 66d28b21fe6b3da8d1e9f0a7ba38bc61b6c547e1 upstream. Ville reported that the sysfs "rom" file for VGA devices disappeared after 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute"). Prior to 527139d738d7, FINAL fixups, including pci_fixup_video() where we find shadow ROMs, were run before pci_create_sysfs_dev_files() created the sysfs "rom" file. After 527139d738d7, "rom" is a static attribute and is created before FINAL fixups are run, so we didn't create "rom" files for shadow ROMs: acpi_pci_root_add ... pci_scan_single_device pci_device_add pci_fixup_video # <-- new HEADER fixup device_add ... if (grp->is_visible()) pci_dev_rom_attr_is_visible # after 527139d738d7 pci_bus_add_devices pci_bus_add_device pci_fixup_device(pci_fixup_final) pci_fixup_video # <-- previous FINAL fixup pci_create_sysfs_dev_files if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) sysfs_create_bin_file("rom") # before 527139d738d7 Change pci_fixup_video() to be a HEADER fixup so it runs before sysfs static attributes are initialized. Rename the Loongson pci_fixup_radeon() to pci_fixup_video() and make its dmesg logging identical to the others since it is doing the same job. Link: https://lore.kernel.org/r/YbxqIyrkv3GhZVxx@intel.com Fixes: 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute") Link: https://lore.kernel.org/r/20220126154001.16895-1-helgaas@kernel.org Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.13+ Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01arm64: extable: fix load_unaligned_zeropad() reg indicesEvgenii Stepanov
commit 3758a6c74e08bdc15ccccd6872a6ad37d165239a upstream. In ex_handler_load_unaligned_zeropad() we erroneously extract the data and addr register indices from ex->type rather than ex->data. As ex->type will contain EX_TYPE_LOAD_UNALIGNED_ZEROPAD (i.e. 4): * We'll always treat X0 as the address register, since EX_DATA_REG_ADDR is extracted from bits [9:5]. Thus, we may attempt to dereference an arbitrary address as X0 may hold an arbitrary value. * We'll always treat X4 as the data register, since EX_DATA_REG_DATA is extracted from bits [4:0]. Thus we will corrupt X4 and cause arbitrary behaviour within load_unaligned_zeropad() and its caller. Fix this by extracting both values from ex->data as originally intended. On an MTE-enabled QEMU image we are hitting the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: fixup_exception+0xc4/0x108 __do_kernel_fault+0x3c/0x268 do_tag_check_fault+0x3c/0x104 do_mem_abort+0x44/0xf4 el1_abort+0x40/0x64 el1h_64_sync_handler+0x60/0xa0 el1h_64_sync+0x7c/0x80 link_path_walk+0x150/0x344 path_openat+0xa0/0x7dc do_filp_open+0xb8/0x168 do_sys_openat2+0x88/0x17c __arm64_sys_openat+0x74/0xa0 invoke_syscall+0x48/0x148 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0x88 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Code: f8695a69 71007d1f 540000e0 927df12a (f940014a) Fixes: 753b32368705 ("arm64: extable: add load_unaligned_zeropad() handler") Cc: <stable@vger.kernel.org> # 5.16.x Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Evgenii Stepanov <eugenis@google.com> Link: https://lore.kernel.org/r/20220125182217.2605202-1-eugenis@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: PPC: Book3S HV Nested: Fix nested HFSCR being clobbered with multiple vCPUsNicholas Piggin
commit 22f7ff0dea9491e90b6fe808ed40c30bd791e5c2 upstream. The L0 is storing HFSCR requested by the L1 for the L2 in struct kvm_nested_guest when the L1 requests a vCPU enter L2. kvm_nested_guest is not a per-vCPU structure. Hilarity ensues. Fix it by moving the nested hfscr into the vCPU structure together with the other per-vCPU nested fields. Fixes: 8b210a880b35 ("KVM: PPC: Book3S HV Nested: Make nested HFSCR state accessible") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122105530.3477250-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any timeLike Xu
commit 05a9e065059e566f218f8778c4d17ee75db56c55 upstream. XCR0 is reset to 1 by RESET but not INIT and IA32_XSS is zeroed by both RESET and INIT. The kvm_set_msr_common()'s handling of MSR_IA32_XSS also needs to update kvm_update_cpuid_runtime(). In the above cases, the size in bytes of the XSAVE area containing all states enabled by XCR0 or (XCRO | IA32_XSS) needs to be updated. For simplicity and consistency, existing helpers are used to write values and call kvm_update_cpuid_runtime(), and it's not exactly a fast path. Fixes: a554d207dc46 ("KVM: X86: Processor States following Reset or INIT") Cc: stable@vger.kernel.org Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220126172226.2298529-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSSLike Xu
commit 4c282e51e4450b94680d6ca3b10f830483b1f243 upstream. Do a runtime CPUID update for a vCPU if MSR_IA32_XSS is written, as the size in bytes of the XSAVE area is affected by the states enabled in XSS. Fixes: 203000993de5 ("kvm: vmx: add MSR logic for XSAVES") Cc: stable@vger.kernel.org Signed-off-by: Like Xu <likexu@tencent.com> [sean: split out as a separate patch, adjust Fixes tag] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220126172226.2298529-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Keep MSR_IA32_XSS unchanged for INITXiaoyao Li
commit be4f3b3f82271c3193ce200a996dc70682c8e622 upstream. It has been corrected from SDM version 075 that MSR_IA32_XSS is reset to zero on Power up and Reset but keeps unchanged on INIT. Fixes: a554d207dc46 ("KVM: X86: Processor States following Reset or INIT") Cc: stable@vger.kernel.org Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220126172226.2298529-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Check .flags in kvm_cpuid_check_equal() tooVitaly Kuznetsov
commit 033a3ea59a19df63edb4db6bfdbb357cd028258a upstream. kvm_cpuid_check_equal() checks for the (full) equality of the supplied CPUID data so .flags need to be checked too. Reported-by: Sean Christopherson <seanjc@google.com> Fixes: c6617c61e8fe ("KVM: x86: Partially allow KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220126131804.2839410-1-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Forcibly leave nested virt when SMM state is toggledSean Christopherson
commit f7e570780efc5cec9b2ed1e0472a7da14e864fdb upstream. Forcibly leave nested virtualization operation if userspace toggles SMM state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace forces the vCPU out of SMM while it's post-VMXON and then injects an SMI, vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both vmxon=false and smm.vmxon=false, but all other nVMX state allocated. Don't attempt to gracefully handle the transition as (a) most transitions are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't sufficient information to handle all transitions, e.g. SVM wants access to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede KVM_SET_NESTED_STATE during state restore as the latter disallows putting the vCPU into L2 if SMM is active, and disallows tagging the vCPU as being post-VMXON in SMM if SMM is not active. Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU in an architecturally impossible state. WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Modules linked in: CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00 Call Trace: <TASK> kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460 kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline] kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline] kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250 kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273 __fput+0x286/0x9f0 fs/file_table.c:311 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xb29/0x2a30 kernel/exit.c:806 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 get_signal+0x4b0/0x28c0 kernel/signal.c:2862 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Cc: stable@vger.kernel.org Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125220358.2091737-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}Sean Christopherson
commit 811f95ff95270e6048197821434d9301e3d7f07c upstream. Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c6617c61e8fe ("KVM: x86: Partially allow KVM_SET_CPUID{,2} after KVM_RUN") Cc: stable@vger.kernel.org Reported-by: syzbot+be576ad7655690586eec@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125210445.2053429-1-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: Move CPUID.(EAX=0x12,ECX=1) mangling to __kvm_update_cpuid_runtime()Vitaly Kuznetsov
commit 5c89be1dd5cfb697614bc13626ba3bd0781aa160 upstream. Full equality check of CPUID data on update (kvm_cpuid_check_equal()) may fail for SGX enabled CPUs as CPUID.(EAX=0x12,ECX=1) is currently being mangled in kvm_vcpu_after_set_cpuid(). Move it to __kvm_update_cpuid_runtime() and split off cpuid_get_supported_xcr0() helper as 'vcpu->arch.guest_supported_xcr0' update needs (logically) to stay in kvm_vcpu_after_set_cpuid(). Cc: stable@vger.kernel.org Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220124103606.2630588-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: x86: nSVM: skip eax alignment check for non-SVM instructionsDenis Valeev
commit 47c28d436f409f5b009dc82bd82d4971088aa391 upstream. The bug occurs on #GP triggered by VMware backdoor when eax value is unaligned. eax alignment check should not be applied to non-SVM instructions because it leads to incorrect omission of the instructions emulation. Apply the alignment check only to SVM instructions to fix. Fixes: d1cba6c92237 ("KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround") Signed-off-by: Denis Valeev <lemniscattaden@gmail.com> Message-Id: <Yexlhaoe1Fscm59u@q> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: SVM: Don't intercept #GP for SEV guestsSean Christopherson
commit 0b0be065b7563ac708aaa9f69dd4941c80b3446d upstream. Never intercept #GP for SEV guests as reading SEV guest private memory will return cyphertext, i.e. emulating on #GP can't work as intended. Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: SVM: Never reject emulation due to SMAP errata for !SEV guestsSean Christopherson
commit 55467fcd55b89c622e62b4afe60ac0eb2fae91f2 upstream. Always signal that emulation is possible for !SEV guests regardless of whether or not the CPU provided a valid instruction byte stream. KVM can read all guest state (memory and registers) for !SEV guests, i.e. can fetch the code stream from memory even if the CPU failed to do so because of the SMAP errata. Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: LAPIC: Also cancel preemption timer during SET_LAPICWanpeng Li
commit 35fe7cfbab2e81f1afb23fc4212210b1de6d9633 upstream. The below warning is splatting during guest reboot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1931 at arch/x86/kvm/x86.c:10322 kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] CPU: 0 PID: 1931 Comm: qemu-system-x86 Tainted: G I 5.17.0-rc1+ #5 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] Call Trace: <TASK> kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd39797350b This can be triggered by not exposing tsc-deadline mode and doing a reboot in the guest. The lapic_shutdown() function which is called in sys_reboot path will not disarm the flying timer, it just masks LVTT. lapic_shutdown() clears APIC state w/ LVT_MASKED and timer-mode bit is 0, this can trigger timer-mode switch between tsc-deadline and oneshot/periodic, which can result in preemption timer be cancelled in apic_update_lvtt(). However, We can't depend on this when not exposing tsc-deadline mode and oneshot/periodic modes emulated by preemption timer. Qemu will synchronise states around reset, let's cancel preemption timer under KVM_SET_LAPIC. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1643102220-35667-1-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01perf/x86/intel: Add a quirk for the calculation of the number of counters on ↵Kan Liang
Alder Lake commit 7fa981cad216e9f64f49e22112f610c0bfed91bc upstream. For some Alder Lake machine with all E-cores disabled in a BIOS, the below warning may be triggered. [ 2.010766] hw perf events fixed 5 > max(4), clipping! Current perf code relies on the CPUID leaf 0xA and leaf 7.EDX[15] to calculate the number of the counters and follow the below assumption. For a hybrid configuration, the leaf 7.EDX[15] (X86_FEATURE_HYBRID_CPU) is set. The leaf 0xA only enumerate the common counters. Linux perf has to manually add the extra GP counters and fixed counters for P-cores. For a non-hybrid configuration, the X86_FEATURE_HYBRID_CPU should not be set. The leaf 0xA enumerates all counters. However, that's not the case when all E-cores are disabled in a BIOS. Although there are only P-cores in the system, the leaf 7.EDX[15] (X86_FEATURE_HYBRID_CPU) is still set. But the leaf 0xA is updated to enumerate all counters of P-cores. The inconsistency triggers the warning. Several software ways were considered to handle the inconsistency. - Drop the leaf 0xA and leaf 7.EDX[15] CPUID enumeration support. Hardcode the number of counters. This solution may be a problem for virtualization. A hypervisor cannot control the number of counters in a Linux guest via changing the guest CPUID enumeration anymore. - Find another CPUID bit that is also updated with E-cores disabled. There may be a problem in the virtualization environment too. Because a hypervisor may disable the feature/CPUID bit. - The P-cores have a maximum of 8 GP counters and 4 fixed counters on ADL. The maximum number can be used to detect the case. This solution is implemented in this patch. Fixes: ee72a94ea4a6 ("perf/x86/intel: Fix fixed counter check warning for some Alder Lake") Reported-by: Damjan Marion (damarion) <damarion@cisco.com> Reported-by: Chan Edison <edison_chan_gz@hotmail.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Damjan Marion (damarion) <damarion@cisco.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1641925238-149288-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01perf/x86/intel/uncore: Fix CAS_COUNT_WRITE issue for ICXZhengjun Xing
commit 96fd2e89fba1aaada6f4b1e5d25a9d9ecbe1943d upstream. The user recently report a perf issue in the ICX platform, when test by perf event “uncore_imc_x/cas_count_write”,the write bandwidth is always very small (only 0.38MB/s), it is caused by the wrong "umask" for the "cas_count_write" event. When double-checking, find "cas_count_read" also is wrong. The public document for ICX uncore: 3rd Gen Intel® Xeon® Processor Scalable Family, Codename Ice Lake,Uncore Performance Monitoring Reference Manual, Revision 1.00, May 2021 On 2.4.7, it defines Unit Masks for CAS_COUNT: RD b00001111 WR b00110000 So corrected both "cas_count_read" and "cas_count_write" for ICX. Old settings: hswep_uncore_imc_events INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x03") INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x0c") New settings: snr_uncore_imc_events INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x0f") INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x30") Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support") Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211223144826.841267-1-zhengjun.xing@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/audit: Fix syscall_get_arch()Christophe Leroy
commit 252745240ba0ae774d2f80c5e185ed59fbc4fb41 upstream. Commit 770cec16cdc9 ("powerpc/audit: Simplify syscall_get_arch()") and commit 898a1ef06ad4 ("powerpc/audit: Avoid unneccessary #ifdef in syscall_get_arguments()") replaced test_tsk_thread_flag(task, TIF_32BIT)) by is_32bit_task(). But is_32bit_task() applies on current task while be want the test done on task 'task' So add a new macro is_tsk_32bit_task() to check any task. Fixes: 770cec16cdc9 ("powerpc/audit: Simplify syscall_get_arch()") Fixes: 898a1ef06ad4 ("powerpc/audit: Avoid unneccessary #ifdef in syscall_get_arguments()") Cc: stable@vger.kernel.org Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c55cddb8f65713bf5859ed675d75a50cb37d5995.1642159570.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01Revert "KVM: SVM: avoid infinite loop on NPF from bad address"Sean Christopherson
commit 31c25585695abdf03d6160aa6d829e855b256329 upstream. Revert a completely broken check on an "invalid" RIP in SVM's workaround for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously expects a gfn, i.e. operates in the guest physical address space, whereas RIP is a virtual (not even linear) address. The "fix" worked for the problematic KVM selftest because the test identity mapped RIP. Fully revert the hack instead of trying to translate RIP to a GPA, as the non-SEV case is now handled earlier, and KVM cannot access guest page tables to translate RIP. This reverts commit e72436bc3a5206f95bb384e741154166ddb3202e. Fixes: e72436bc3a52 ("KVM: SVM: avoid infinite loop on NPF from bad address") Reported-by: Liam Merwick <liam.merwick@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/bpf: Update ldimm64 instructions during extra passNaveen N. Rao
commit f9320c49993ca3c0ec0f9a7026b313735306bb8b upstream. These instructions are updated after the initial JIT, so redo codegen during the extra pass. Rename bpf_jit_fixup_subprog_calls() to clarify that this is more than just subprog calls. Fixes: 69c087ba6225b5 ("bpf: Add bpf_for_each_map_elem() helper") Cc: stable@vger.kernel.org # v5.15 Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7cc162af77ba918eb3ecd26ec9e7824bc44b1fae.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc32/bpf: Fix codegen for bpf-to-bpf callsNaveen N. Rao
commit fab07611fb2e6a15fac05c4583045ca5582fd826 upstream. Pad instructions emitted for BPF_CALL so that the number of instructions generated does not change for different function addresses. This is especially important for calls to other bpf functions, whose address will only be known during extra pass. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Cc: stable@vger.kernel.org # v5.13+ Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/52d8fe51f7620a6f27f377791564d79d75463576.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/nmi: handle vector validity failures for KVM guestsChristian Borntraeger
commit f094a39c6ba168f2df1edfd1731cca377af5f442 upstream. The machine check validity bit tells about the context. If a KVM guest was running the bit tells about the guest validity and the host state is not affected. As a guest can disable the guest validity this might result in unwanted host errors on machine checks. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/nmi: handle guarded storage validity failures for KVM guestsChristian Borntraeger
commit 1ea1d6a847d2b1d17fefd9196664b95f052a0775 upstream. machine check validity bits reflect the state of the machine check. If a guest does not make use of guarded storage, the validity bit might be off. We can not use the host CR bit to decide if the validity bit must be on. So ignore "invalid" guarded storage controls for KVM guests in the host and rely on the machine check being forwarded to the guest. If no other errors happen from a host perspective everything is fine and no process must be killed and the host can continue to run. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Reported-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Tested-by: Carsten Otte <cotte@de.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/hypfs: include z/VM guests with access control group setVasily Gorbik
commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream. Currently if z/VM guest is allowed to retrieve hypervisor performance data globally for all guests (privilege class B) the query is formed in a way to include all guests but the group name is left empty. This leads to that z/VM guests which have access control group set not being included in the results (even local vm). Change the query group identifier from empty to "any" to retrieve information about all guests from any groups (or without a group set). Cc: stable@vger.kernel.org Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/module: fix loading modules with a lot of relocationsIlya Leoshkevich
commit f3b7e73b2c6619884351a3a0a7468642f852b8a2 upstream. If the size of the PLT entries generated by apply_rela() exceeds 64KiB, the first ones can no longer reach __jump_r1 with brc. Fix by using brcl. An alternative solution is to add a __jump_r1 copy after every 64KiB, however, the space savings are quite small and do not justify the additional complexity. Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Cc: stable@vger.kernel.org Reported-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: arm64: vgic-v3: Restrict SEIS workaround to known broken systemsMarc Zyngier
commit d11a327ed95dbec756b99cbfef2a7fd85c9eeb09 upstream. Contrary to what df652bcf1136 ("KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors") was asserting, there is at least one other system out there (Cavium ThunderX2) implementing SEIS, and not in an obviously broken way. So instead of imposing the M1 workaround on an innocent bystander, let's limit it to the two known broken Apple implementations. Fixes: df652bcf1136 ("KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors") Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220122103912.795026-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01KVM: arm64: Use shadow SPSR_EL1 when injecting exceptions on !VHEMarc Zyngier
commit 278583055a237270fac70518275ba877bf9e4013 upstream. Injecting an exception into a guest with non-VHE is risky business. Instead of writing in the shadow register for the switch code to restore it, we override the CPU register instead. Which gets overriden a few instructions later by said restore code. The result is that although the guest correctly gets the exception, it will return to the original context in some random state, depending on what was there the first place... Boo. Fix the issue by writing to the shadow register. The original code is absolutely fine on VHE, as the state is already loaded, and writing to the shadow register in that case would actually be a bug. Fixes: bb666c472ca2 ("KVM: arm64: Inject AArch64 exceptions from HYP") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Fuad Tabba <tabba@google.com> Link: https://lore.kernel.org/r/20220121184207.423426-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01ARM: 9180/1: Thumb2: align ALT_UP() sections in modules sufficientlyArd Biesheuvel
commit 9f80ccda53b9417236945bc7ece4b519037df74d upstream. When building for Thumb2, the .alt.smp.init sections that are emitted by the ALT_UP() patching code may not be 32-bit aligned, even though the fixup_smp_on_up() routine expects that. This results in alignment faults at module load time, which need to be fixed up by the fault handler. So let's align those sections explicitly, and prevent this from occurring. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01ARM: 9179/1: uaccess: avoid alignment faults in copy_[from|to]_kernel_nofaultArd Biesheuvel
commit 15420269b02a63ed8c1841905d8b8b2403246004 upstream. The helpers that are used to implement copy_from_kernel_nofault() and copy_to_kernel_nofault() cast a void* to a pointer to a wider type, which may result in alignment faults on ARM if the compiler decides to use double-word or multiple-word load/store instructions. Only configurations that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y are affected, given that commit 2423de2e6f4d ("ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault") ensures that dst and src are sufficiently aligned otherwise. So use the unaligned accessors for accessing dst and src in cases where they may be misaligned. Cc: <stable@vger.kernel.org> # depends on 2423de2e6f4d Fixes: 2df4c9a741a0 ("ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29arm64/bpf: Remove 128MB limit for BPF JIT programsRussell King
commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream. Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory") restricts BPF JIT program allocation to a 128MB region to ensure BPF programs are still in branching range of each other. However this restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL are implemented as a 64-bit move into a register and then a BLR instruction - which has the effect of being able to call anything without proximity limitation. The practical reason to relax this restriction on JIT memory is that 128MB of JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one page is needed per program. In cases where seccomp filters are applied to multiple VMs on VM launch - such filters are classic BPF but converted to BPF - this can severely limit the number of VMs that can be launched. In a world where we support BPF JIT always on, turning off the JIT isn't always an option either. Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory") Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <russell.king@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/1636131046-5982-2-git-send-email-alan.maguire@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 10:24:42 +0000