summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-02-20perf/x86/intel/uncore: Add Node ID maskKan Liang
commit 9e63a7894fd302082cf3627fe90844421a6cbe7f upstream. Some PCI uncore PMUs cannot be registered on an 8-socket system (HPE Superdome Flex). To understand which Socket the PCI uncore PMUs belongs to, perf retrieves the local Node ID of the uncore device from CPUNODEID(0xC0) of the PCI configuration space, and the mapping between Socket ID and Node ID from GIDNIDMAP(0xD4). The Socket ID can be calculated accordingly. The local Node ID is only available at bit 2:0, but current code doesn't mask it. If a BIOS doesn't clear the rest of the bits, an incorrect Node ID will be fetched. Filter the Node ID by adding a mask. Reported-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # v3.7+ Fixes: 7c94ee2e0917 ("perf/x86: Add Intel Nehalem and Sandy Bridge-EP uncore support") Link: https://lkml.kernel.org/r/1548600794-33162-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20KVM: nVMX: unconditionally cancel preemption timer in free_nested ↵Peter Shier
(CVE-2019-7221) commit ecec76885bcfe3294685dc363fd1273df0d5d65f upstream. Bugzilla: 1671904 There are multiple code paths where an hrtimer may have been started to emulate an L1 VMX preemption timer that can result in a call to free_nested without an intervening L2 exit where the hrtimer is normally cancelled. Unconditionally cancel in free_nested to cover all cases. Embargoed until Feb 7th 2019. Signed-off-by: Peter Shier <pshier@google.com> Reported-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Message-Id: <20181011184646.154065-1-pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)Paolo Bonzini
commit 353c0956a618a07ba4bbe7ad00ff29fe70e8412a upstream. Bugzilla: 1671930 Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with memory operand, INVEPT, INVVPID) can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Embargoed until Feb 7th 2019. Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20um: Avoid marking pages with "changed protection"Anton Ivanov
[ Upstream commit 8892d8545f2d0342b9c550defbfb165db237044b ] Changing protection is a very high cost operation in UML because in addition to an extra syscall it also interrupts mmap merge sequences generated by the tlb. While the condition is not particularly common it is worth avoiding. Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20powerpc/uaccess: fix warning/error with access_ok()Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ] With the following piece of code, the following compilation warning is encountered: if (_IOC_DIR(ioc) != _IOC_NONE) { int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) { drivers/platform/test/dev.c: In function 'my_ioctl': drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable] int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; This patch fixes it by referencing 'type' in the macro allthough doing nothing with it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20arm64: KVM: Skip MMIO insn after emulationMark Rutland
[ Upstream commit 0d640732dbebed0f10f18526de21652931f0b2f2 ] When we emulate an MMIO instruction, we advance the CPU state within decode_hsr(), before emulating the instruction effects. Having this logic in decode_hsr() is opaque, and advancing the state before emulation is problematic. It gets in the way of applying consistent single-step logic, and it prevents us from being able to fail an MMIO instruction with a synchronous exception. Clean this up by only advancing the CPU state *after* the effects of the instruction are emulated. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20ARM: pxa: avoid section mismatch warningArnd Bergmann
[ Upstream commit 88af3209aa0881aa5ffd99664b6080a4be5f24e5 ] WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info() The function littleton_init_lcd() references the function __init pxa_set_fb_info(). This is often because littleton_init_lcd lacks a __init annotation or the annotation of pxa_set_fb_info is wrong. WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info() The function zeus_register_ohci() references the function __init pxa_set_ohci_info(). This is often because zeus_register_ohci lacks a __init annotation or the annotation of pxa_set_ohci_info is wrong. WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info() The function cm_x300_init_u2d() references the function __init pxa3xx_set_u2d_info(). This is often because cm_x300_init_u2d lacks a __init annotation or the annotation of pxa3xx_set_u2d_info is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20clk: imx6sl: ensure MMDC CH0 handshake is bypassedAnson Huang
[ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ] Same as other i.MX6 SoCs, ensure unused MMDC channel's handshake is bypassed, this is to make sure no request signal will be generated when periphe_clk_sel is changed or SRC warm reset is triggered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20mips: bpf: fix encoding bug for mm_srlv32_opJiong Wang
[ Upstream commit 17f6c83fb5ebf7db4fcc94a5be4c22d5a7bfe428 ] For micro-mips, srlv inside POOL32A encoding space should use 0x50 sub-opcode, NOT 0x90. Some early version ISA doc describes the encoding as 0x90 for both srlv and srav, this looks to me was a typo. I checked Binutils libopcode implementation which is using 0x50 for srlv and 0x90 for srav. v1->v2: - Keep mm_srlv32_op sorted by value. Fixes: f31318fdf324 ("MIPS: uasm: Add srlv uasm instruction") Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20ARM: dts: Fix OMAP4430 SDP Ethernet startupRussell King - ARM Linux
[ Upstream commit 84fb6c7feb1494ebb7d1ec8b95cfb7ada0264465 ] It was noticed that unbinding and rebinding the KSZ8851 ethernet resulted in the driver reporting "failed to read device ID" at probe. Probing the reset line with a 'scope while repeatedly attempting to bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is constantly held at zero, meaning the device is held in reset, and does not respond on the SPI bus. Experimentation with the startup delay on the regulator set to 50ms shows that the reset is positively released after 20ms. Schematics for this board are not available, and the traces are buried in the inner layers of the board which makes tracing where the RSTN pin extremely difficult. We can only guess that the RSTN pin is wired to a reset generator chip driven off the ethernet supply, which fits the observed behaviour. Include this delay in the regulator startup delay - effectively treating the reset as a "supply stable" indicator. This can not be modelled as a delay in the KSZ8851 driver since the reset generation is board specific - if the RSTN pin had been wired to a GPIO, reset could be released earlier via the already provided support in the KSZ8851 driver. This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based on Blaze schematics that should be very close to SDP4430: TPS22902YFPR is used as the regulator switch (gpio48 controlled): Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV. (SCH Note: Threshold set at 90%. Vsense: 0.405V). According to the TPS3808 data sheet the RESET delay time when Ct is open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated with notes from schematics from Peter] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20arm64: ftrace: don't adjust the LR valueMark Rutland
[ Upstream commit 6e803e2e6e367db9a0d6ecae1bd24bb5752011bd ] The core ftrace code requires that when it is handed the PC of an instrumented function, this PC is the address of the instrumented instruction. This is necessary so that the core ftrace code can identify the specific instrumentation site. Since the instrumented function will be a BL, the address of the instrumented function is LR - 4 at entry to the ftrace code. This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers, which acquire the PC of the instrumented function. The mcount_get_lr helper is used to acquire the LR of the instrumented function, whose value does not require this adjustment, and cannot be adjusted to anything meaningful. No adjustment of this value is made on other architectures, including arm. However, arm64 adjusts this value by 4. This patch brings arm64 in line with other architectures and removes the adjustment of the LR value. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20ARM: OMAP2+: hwmod: Fix some section annotationsNathan Chancellor
[ Upstream commit c10b26abeb53cabc1e6271a167d3f3d396ce0218 ] When building the kernel with Clang, the following section mismatch warnings appears: WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from the function _setup() to the function .init.text:_setup_iclk_autoidle() The function _setup() references the function __init _setup_iclk_autoidle(). This is often because _setup lacks a __init annotation or the annotation of _setup_iclk_autoidle is wrong. WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from the function _setup() to the function .init.text:_setup_reset() The function _setup() references the function __init _setup_reset(). This is often because _setup lacks a __init annotation or the annotation of _setup_reset is wrong. WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from the function _setup() to the function .init.text:_setup_postsetup() The function _setup() references the function __init _setup_postsetup(). This is often because _setup lacks a __init annotation or the annotation of _setup_postsetup is wrong. _setup is used in omap_hwmod_allocate_module, which isn't marked __init and looks like it shouldn't be, meaning to fix these warnings, those functions must be moved out of the init section, which this patch does. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20powerpc/pseries: add of_node_put() in dlpar_detach_node()Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ] The previous commit, "of: overlay: add missing of_node_get() in __of_attach_node_sysfs" added a missing of_node_get() to __of_attach_node_sysfs(). This results in a refcount imbalance for nodes attached with dlpar_attach_node(). The calling sequence from dlpar_attach_node() to __of_attach_node_sysfs() is: dlpar_attach_node() of_attach_node() __of_attach_node_sysfs() For more detailed description of the node refcount, see commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"). Tested-by: Alan Tull <atull@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)Colin Ian King
[ Upstream commit 53bb565fc5439f2c8c57a786feea5946804aa3e9 ] In the expression "word1 << 16", word1 starts as u16, but is promoted to a signed int, then sign-extended to resource_size_t, which is probably not what was intended. Cast to resource_size_t to avoid the sign extension. This fixes an identical issue as fixed by commit 0b2d70764bb3 ("x86/PCI: Fix Broadcom CNB20LE unintended sign extension") back in 2014. Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension") Fixes: 3f6ea84a3035 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20ARM: 8808/1: kexec:offline panic_smp_self_stop CPUYufen Wang
[ Upstream commit 82c08c3e7f171aa7f579b231d0abbc1d62e91974 ] In case panic() and panic() called at the same time on different CPUS. For example: CPU 0: panic() __crash_kexec machine_crash_shutdown crash_smp_send_stop machine_kexec BUG_ON(num_online_cpus() > 1); CPU 1: panic() local_irq_disable panic_smp_self_stop If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump fails. CPU1 can't receive the ipi irq, CPU1 will be always online. To fix this problem, this patch split out the panic_smp_self_stop() and add set_cpu_online(smp_processor_id(), false). Signed-off-by: Yufen Wang <wangyufen@huawei.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06x86/kaslr: Fix incorrect i8254 outb() parametersDaniel Drake
commit 7e6fc2f50a3197d0e82d1c0e86282976c9e6c8a4 upstream. The outb() function takes parameters value and port, in that order. Fix the parameters used in the kalsr i8254 fallback code. Fixes: 5bfce5ef55cb ("x86, kaslr: Provide randomness functions") Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: linux@endlessm.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190107034024.15005-1-drake@endlessm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06s390/smp: fix CPU hotplug deadlock with CPU rescanGerald Schaefer
commit b7cb707c373094ce4008d4a6ac9b6b366ec52da5 upstream. smp_rescan_cpus() is called without the device_hotplug_lock, which can lead to a dedlock when a new CPU is found and immediately set online by a udev rule. This was observed on an older kernel version, where the cpu_hotplug_begin() loop was still present, and it resulted in hanging chcpu and systemd-udev processes. This specific deadlock will not show on current kernels. However, there may be other possible deadlocks, and since smp_rescan_cpus() can still trigger a CPU hotplug operation, the device_hotplug_lock should be held. For reference, this was the deadlock with the old cpu_hotplug_begin() loop: chcpu (rescan) systemd-udevd echo 1 > /sys/../rescan -> smp_rescan_cpus() -> (*) get_online_cpus() (increases refcount) -> smp_add_present_cpu() (new CPU found) -> register_cpu() -> device_add() -> udev "add" event triggered -----------> udev rule sets CPU online -> echo 1 > /sys/.../online -> lock_device_hotplug_sysfs() (this is missing in rescan path) -> device_online() -> (**) device_lock(new CPU dev) -> cpu_up() -> cpu_hotplug_begin() (loops until refcount == 0) -> deadlock with (*) -> bus_probe_device() -> device_attach() -> device_lock(new CPU dev) -> deadlock with (**) Fix this by taking the device_hotplug_lock in the CPU rescan path. Cc: <stable@vger.kernel.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26clk: imx6q: reset exclusive gates on initLucas Stach
[ Upstream commit f7542d817733f461258fd3a47d77da35b2d9fc81 ] The exclusive gates may be set up in the wrong way by software running before the clock driver comes up. In that case the exclusive setup is locked in its initial state, as the complementary function can't be activated without disabling the initial setup first. To avoid this lock situation, reset the exclusive gates to the off state and allow the kernel to provide the proper setup. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSurMaciej W. Rozycki
[ Upstream commit e4849aff1e169b86c561738daf8ff020e9de1011 ] The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip DRAM controller that supports memory amounts of up to 16GiB, and due to how the address decoder has been wired in the SOC any memory beyond 1GiB is actually mapped starting from 4GiB physical up, that is beyond the 32-bit addressable limit[1]. Consequently if the maximum amount of memory has been installed, then it will span up to 19GiB. Many of the evaluation boards we support that are based on one of these SOCs have their memory soldered and the amount present fits in the 32-bit address range. The BCM91250A SWARM board however has actual DIMM slots and accepts, depending on the peripherals revision of the SOC, up to 4GiB or 8GiB of memory in commercially available JEDEC modules[2]. I believe this is also the case with the BCM91250C2 LittleSur board. This means that up to either 3GiB or 7GiB of memory requires 64-bit addressing to access. I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead, accepts at least as much memory, although I have no documentation or actual hardware available to verify that. Both systems have PCI slots installed for use by any PCI option boards, including ones that only support 32-bit addressing (additionally the 32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits addressing to 32-bits), and there is no IOMMU available. Therefore for PCI DMA to work in the presence of memory beyond enable swiotlb for the affected systems. All the other SOC onchip DMA devices use 40-bit addressing and therefore can address the whole memory, so only enable swiotlb if PCI support and support for DMA beyond 4GiB have been both enabled in the configuration of the kernel. This shows up as follows: Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2) Board type: SiByte BCM91250A (SWARM) Determined physical RAM map: memory: 000000000fe7fe00 @ 0000000000000000 (usable) memory: 000000001ffffe00 @ 0000000080000000 (usable) memory: 000000000ffffe00 @ 00000000c0000000 (usable) memory: 0000000087fffe00 @ 0000000100000000 (usable) software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB) in the bootstrap log and removes failures like these: defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi0: Receive buffer allocation failed fddi0: Adapter open failed! IP-Config: Failed to open fddi0 defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi1: Receive buffer allocation failed fddi1: Adapter open failed! IP-Config: Failed to open fddi1 when memory beyond 4GiB is handed out to devices that can only do 32-bit addressing. This updates commit cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32."). References: [1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R, Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview", "Memory Map", pp. 34-38 [2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom Corporation, 18 May 2004, Section 3: "Physical Description", "Supported DRAM", p. 23 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> [paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it] Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Patchwork: https://patchwork.linux-mips.org/patch/21108/ References: cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26Disable MSI also when pcie-octeon.pcie_disable onYunQiang Su
commit a214720cbf50cd8c3f76bbb9c3f5c283910e9d33 upstream. Octeon has an boot-time option to disable pcie. Since MSI depends on PCI-E, we should also disable MSI also with this option is on in order to avoid inadvertently accessing PCIe registers. Signed-off-by: YunQiang Su <ysu@wavecomp.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: pburton@wavecomp.com Cc: linux-mips@vger.kernel.org Cc: aaro.koskinen@iki.fi Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26sparc32: Fix inverted invalid_frame_pointer checks on sigreturnsAndreas Larsson
commit 07b5ab3f71d318e52c18cc3b73c1d44c908aacfa upstream. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13MIPS: Align kernel load address to 64KBHuacai Chen
commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21131/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: <stable@vger.kernel.org> # 2.6.36+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13MIPS: Ensure pmd_present() returns false after pmd_mknotpresent()Huacai Chen
commit 92aa0718c9fa5160ad2f0e7b5bffb52f1ea1e51a upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0ff9a6 ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21135/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixupSean Christopherson
commit e81434995081fd7efb755fd75576b35dbb0850b1 upstream. ____kvm_handle_fault_on_reboot() provides a generic exception fixup handler that is used to cleanly handle faults on VMX/SVM instructions during reboot (or at least try to). If there isn't a reboot in progress, ____kvm_handle_fault_on_reboot() treats any exception as fatal to KVM and invokes kvm_spurious_fault(), which in turn generates a BUG() to get a stack trace and die. When it was originally added by commit 4ecac3fd6dc2 ("KVM: Handle virtualization instruction #UD faults during reboot"), the "call" to kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value is the RIP of the faulting instructing. The PUSH+JMP trickery is necessary because the exception fixup handler code lies outside of its associated function, e.g. right after the function. An actual CALL from the .fixup code would show a slightly bogus stack trace, e.g. an extra "random" function would be inserted into the trace, as the return RIP on the stack would point to no known function (and the unwinder will likely try to guess who owns the RIP). Unfortunately, the JMP was replaced with a CALL when the macro was reworked to not spin indefinitely during reboot (commit b7c4145ba2eb "KVM: Don't spin on virt instruction faults during reboot"). This causes the aforementioned behavior where a bogus function is inserted into the stack trace, e.g. my builds like to blame free_kvm_area(). Revert the CALL back to a JMP. The changelog for commit b7c4145ba2eb ("KVM: Don't spin on virt instruction faults during reboot") contains nothing that indicates the switch to CALL was deliberate. This is backed up by the fact that the PUSH <insn RIP> was left intact. Note that an alternative to the PUSH+JMP magic would be to JMP back to the "real" code and CALL from there, but that would require adding a JMP in the non-faulting path to avoid calling kvm_spurious_fault() and would add no value, i.e. the stack trace would be the same. Using CALL: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0 R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000 FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0 Call Trace: free_kvm_area+0x1044/0x43ea [kvm_intel] ? vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace 9775b14b123b1713 ]--- Using JMP: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0 R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40 FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0 Call Trace: vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace f9daedb85ab3ddba ]--- Fixes: b7c4145ba2eb ("KVM: Don't spin on virt instruction faults during reboot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13x86/mtrr: Don't copy uninitialized gentry fields back to userspaceColin Ian King
commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream. Currently the copy_to_user of data in the gentry struct is copying uninitiaized data in field _pad from the stack to userspace. Fix this by explicitly memset'ing gentry to zero, this also will zero any compiler added padding fields that may be in struct (currently there are none). Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable") Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: security@kernel.org Link: https://lkml.kernel.org/r/20181218172956.1440-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handlingChris Cole
[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ] This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by: Chris Cole <chris@sageembedded.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21x86/earlyprintk/efi: Fix infinite loop on some screen widthsYiFei Zhu
[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ] An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21powerpc: Look for "stdout-path" when setting up legacy consolesBenjamin Herrenschmidt
commit bf3d6afbb234156749b640b6c50f714967a85964 upstream. Commit 78e5dfea84dc ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'") broke the default console on a number of embedded PowerPC systems, because it failed to also update the code in arch/powerpc/kernel/legacy_serial.c to look for that property in addition to the old one. This fixes it. Fixes: 78e5dfea84dc ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21powerpc/boot: Fix random libfdt related build errorsGuenter Roeck
[ Upstream commit 64c3f648c25d108f346fdc96c15180c6b7d250e9 ] Once in a while I see build errors similar to the following when building images from a clean tree. Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed ------------ Error log: arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error: libfdt.h: No such file or directory Building powerpc:bamboo:smpdev:44x/bamboo_defconfig ... failed ------------ Error log: arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error: libfdt.h: No such file or directory arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error: libfdt.h: No such file or directory Rebuilds will succeed. Turns out that several source files in arch/powerpc/boot/ include libfdt.h, but Makefile dependencies are incomplete. Let's fix that. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Backport to v4.4.y] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17KVM: x86: fix empty-body warningsYi Wang
[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ] We get the following warnings about empty statements when building with 'W=1': arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Rework the debug helper macro to get rid of these warnings. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17s390/cpum_cf: Reject request for sampling in event initializationThomas Richter
[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ] On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] # Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling. During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times: cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok. Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2). Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000. Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails: event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; } if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } } The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95). Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list. Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17ARM: OMAP1: ams-delta: Fix possible use of uninitialized fieldJanusz Krzysztofik
[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ] While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm(). Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeupNathan Chancellor
[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ] When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from the function omap44xx_prm_late_init() to the function .init.text:omap44xx_prm_enable_io_wakeup() The function omap44xx_prm_late_init() references the function __init omap44xx_prm_enable_io_wakeup(). This is often because omap44xx_prm_late_init lacks a __init annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong. Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there is no more mismatch. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13powerpc/vdso64: Use double word compare on pointersAnton Blanchard
[ Upstream commit 5045ea37377ce8cca6890d32b127ad6770e6dce5 ] __kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to check if the passed in pointer is non zero. cmpli maps to a 32 bit compare on binutils, so we ignore the top 32 bits. A simple test case can be created by passing in a bogus pointer with the bottom 32 bits clear. Using a clk_id that is handled by the VDSO, then one that is handled by the kernel shows the problem: printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000)); printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000)); And we get: 0 -1 The bigger issue is if we pass a valid pointer with the bottom 32 bits clear, in this case we will return success but won't write any data to the pointer. I stumbled across this issue because the LLVM integrated assembler doesn't accept cmpli with 3 arguments. Fix this by converting them to cmpldi. Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Cc: stable@vger.kernel.org # v2.6.15+ Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13mips: fix mips_get_syscall_arg o32 checkDmitry V. Levin
commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream. When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should use the task specified as its argument instead of the current task. This potentially affects all syscall_get_arguments() users who specify tasks different from the current. Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21185/ Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01arm64: remove no-op -p linker flagGreg Hackmann
(commit 1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 upstream) Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-01powerpc/numa: Suppress "VPHN is not supported" messagesSatheesh Rajendran
[ Upstream commit 437ccdc8ce629470babdda1a7086e2f477048cbd ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27s390/vdso: add missing FORCE to build targetsVasily Gorbik
[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27um: Give start_idle_thread() a return codeRichard Weinberger
[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ] Fixes: arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of non-void function [-Wreturn-type] longjmp() never returns but gcc still warns that the end of the function can be reached. Add a return code and debug aid to detect this impossible case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-22arch/alpha, termios: implement BOTHER, IBSHIFT and termios2H. Peter Anvin (Intel)
commit d0ffb805b729322626639336986bc83fc2e60871 upstream. Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags using arbitrary flags. Because BOTHER is not defined, the general Linux code doesn't allow setting arbitrary baud rates, and because CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037. Resolve both problems by #defining BOTHER to 037 on Alpha. However, userspace still needs to know if setting BOTHER is actually safe given legacy kernels (does anyone actually care about that on Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even though they use the same structure. Define struct termios2 just for compatibility; it is the exact same structure as struct termios. In a future patchset, this will be cleaned up so the uapi headers are usable from libc. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: <linux-alpha@vger.kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22xtensa: fix boot parameters address translationMax Filippov
commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream. The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22powerpc/boot: Ensure _zimage_start is a weak symbolJoel Stanley
[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ] When building with clang crt0's _zimage_start is not marked weak, which breaks the build when linking the kernel image: $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 g .text 0000000000000000 _zimage_start ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start': (.text+0x58): multiple definition of '_zimage_start'; arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here Clang requires the .weak directive to appear after the symbol is declared. The binutils manual says: This directive sets the weak attribute on the comma separated list of symbol names. If the symbols do not already exist, they will be created. So it appears this is different with clang. The only reference I could see for this was an OpenBSD mailing list post[1]. Changing it to be after the declaration fixes building with Clang, and still works with GCC. $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 w .text 0000000000000000 _zimage_start Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921 [1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22MIPS: kexec: Mark CPU offline before disabling local IRQDengcheng Zhu
[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ] After changing CPU online status, it will not be sent any IPIs such as in __flush_cache_all() on software coherency systems. Do this before disabling local IRQ. Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20571/ Cc: pburton@wavecomp.com Cc: ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: rachel.mozes@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22powerpc/nohash: fix undefined behaviour when testing page size supportDaniel Axtens
[ Upstream commit f5e284803a7206d43e26f9ffcae5de9626d95e37 ] When enumerating page size definitions to check hardware support, we construct a constant which is (1U << (def->shift - 10)). However, the array of page size definitions is only initalised for various MMU_PAGE_* constants, so it contains a number of 0-initialised elements with def->shift == 0. This means we end up shifting by a very large number, which gives the following UBSan splat: ================================================================================ UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21 shift exponent 4294967286 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6 Call Trace: [c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable) [c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64 [c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4 [c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0 [c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130 [c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80 ================================================================================ Fix this by first checking if the element exists (shift != 0) before constructing the constant. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22x86: boot: Fix EFI stub alignmentBen Hutchings
[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ] We currently align the end of the compressed image to a multiple of 16. However, the PE-COFF header included in the EFI stub says that the file alignment is 32 bytes, and when adding an EFI signature to the file it must first be padded to this alignment. sbsigntool commands warn about this: warning: file-aligned section .text extends beyond end of file warning: checksum areas are greater than image size. Invalid section table? Worse, pesign -at least when creating a detached signature- uses the hash of the unpadded file, resulting in an invalid signature if padding is required. Avoid both these problems by increasing alignment to 32 bytes when CONFIG_EFI_STUB is enabled. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22sparc: Throttle perf events properly.David S. Miller
[ Upstream commit 455adb3174d2c8518cef1a61140c211f6ac224d2 ] Like x86 and arm, call perf_sample_event_took() in perf event NMI interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22sparc: Fix single-pcr perf event counter management.David S. Miller
[ Upstream commit cfdc3170d214046b9509183fe9b9544dc644d40b ] It is important to clear the hw->state value for non-stopped events when they are added into the PMU. Otherwise when the event is scheduled out, we won't read the counter because HES_UPTODATE is still set. This breaks 'perf stat' and similar use cases, causing all the events to show zero. This worked for multi-pcr because we make explicit sparc_pmu_start() calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do this because the idea there is to accumulate all of the counter settings into the single pcr value. So we have to add explicit hw->state handling there. Like x86, we use the PERF_HES_ARCH bit to track truly stopped events so that we don't accidently start them on a reload. Related to all of this, sparc_pmu_start() is missing a userpage update so add it. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22x86/corruption-check: Fix panic in memory_corruption_check() when boot ↵He Zhe
option without value is provided commit ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream. memory_corruption_check[{_period|_size}]()'s handlers do not check input argument before passing it to kstrtoul() or simple_strtoull(). The argument would be a NULL pointer if each of the kernel parameters, without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2 [ 0.000000] RIP: 0010:kstrtoull+0x2/0x10 ... [ 0.000000] Call Trace [ 0.000000] ? set_corruption_check+0x21/0x49 [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds checks to prevent the panic. Signed-off-by: He Zhe <zhe.he@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: kstewart@linuxfoundation.org Cc: pombredanne@nexb.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARsPrarit Bhargava
[ Upstream commit da77b67195de1c65bef4908fa29967c4d0af2da2 ] Commit b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant BARs. Home Agent 1 also has non-compliant BARs. Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't touch them. The problem with these devices is documented in the Xeon v4 specification update: BDF2 PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration Problem: During system initialization the Operating System may access the standard PCI BARs (Base Address Registers). Due to this erratum, accesses to the Home Agent BAR registers (Bus 1; Device 18; Function 0,4; Offsets (0x14-0x24) will return non-zero values. Implication: The operating system may issue a warning. Intel has not observed any functional failures due to this erratum. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html Fixes: b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Andi Kleen <ak@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10x86/ldt: Fix small LDT allocation for XenJan Beulich
[ Upstream commit f454b478861325f067fd58ba7ee9f1b5c4a9d6a0 ] While the following commit: 37868fe113 ("x86/ldt: Make modify_ldt synchronous") added a nice comment explaining that Xen needs page-aligned whole page chunks for guest descriptor tables, it then nevertheless used kzalloc() on the small size path. As I'm unaware of guarantees for kmalloc(PAGE_SIZE, ) to return page-aligned memory blocks, I believe this needs to be switched back to __get_free_page() (or better get_zeroed_page()). Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/55E735D6020000780009F1E6@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 03:12:22 +0000