summaryrefslogtreecommitdiff
path: root/block/blk-sysfs.c
AgeCommit message (Collapse)Author
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-12-12mm: don't cap request size based on read-ahead settingJens Axboe
We ran into a funky issue, where someone doing 256K buffered reads saw 128K requests at the device level. Turns out it is read-ahead capping the request size, since we use 128K as the default setting. This doesn't make a lot of sense - if someone is issuing 256K reads, they should see 256K reads, regardless of the read-ahead setting, if the underlying device can support a 256K read in a single command. This patch introduces a bdi hint, io_pages. This is the soft max IO size for the lower level, I've hooked it up to the bdev settings here. Read-ahead is modified to issue the maximum of the user request size, and the read-ahead max size, but capped to the max request size on the device side. The latter is done to avoid reading ahead too much, if the application asks for a huge read. With this patch, the kernel behaves like the application expects. Link: http://lkml.kernel.org/r/1479498073-8657-1-git-send-email-axboe@fb.com Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28blk-wbt: allow wbt to be enabled always through sysfsJens Axboe
Currently there's no way to enable wbt if it's not enabled in the kernel config by default for a device. Allow a write to the 'wbt_lat_usec' queue sysfs file to enable wbt. This is useful for both the kernel config case, but also if the device is CFQ managed and it was turned off by default. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28blk-wbt: allow reset of default latency through sysfsJens Axboe
Allow a write of '-1' to reset the default latency target for a given device. This removes knowledge of the different default settings for rotational vs non-rotational from user space. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-17blk-mq: make the polling code adaptiveJens Axboe
The previous commit introduced the hybrid sleep/poll mode. Take that one step further, and use the completion latencies to automatically sleep for half the mean completion time. This is a good approximation. This changes the 'io_poll_delay' sysfs file a bit to expose the various options. Depending on the value, the polling code will behave differently: -1 Never enter hybrid sleep mode 0 Use half of the completion mean for the sleep delay >0 Use this specific value as the sleep delay Signed-off-by: Jens Axboe <axboe@fb.com> Tested-By: Stephen Bates <sbates@raithlin.com> Reviewed-By: Stephen Bates <sbates@raithlin.com>
2016-11-17blk-mq: implement hybrid poll mode for sync O_DIRECTJens Axboe
This patch enables a hybrid polling mode. Instead of polling after IO submission, we can induce an artificial delay, and then poll after that. For example, if the IO is presumed to complete in 8 usecs from now, we can sleep for 4 usecs, wake up, and then do our polling. This still puts a sleep/wakeup cycle in the IO path, but instead of the wakeup happening after the IO has completed, it'll happen before. With this hybrid scheme, we can achieve big latency reductions while still using the same (or less) amount of CPU. Signed-off-by: Jens Axboe <axboe@fb.com> Tested-By: Stephen Bates <sbates@raithlin.com> Reviewed-By: Stephen Bates <sbates@raithlin.com>
2016-11-11blk-wbt: remove stat opsJens Axboe
Again a leftover from when the throttling code was generic. Now that we just have the block user, get rid of the stat ops and indirections. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10block: hook up writeback throttlingJens Axboe
Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10block: add scalable completion tracking of requestsJens Axboe
For legacy block, we simply track them in the request queue. For blk-mq, we track them on a per-sw queue basis, which we can then sum up through the hardware queues and finally to a per device state. The stats are tracked in, roughly, 0.1s interval windows. Add sysfs files to display the stats. The feature is off by default, to avoid any extra overhead. In-kernel users of it can turn it on by setting QUEUE_FLAG_STATS in the queue flags. We currently don't turn it on if someone just reads any of the stats files, that is something we could add as well. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18blk-sysfs: Add 'chunk_sectors' to sysfs attributesHannes Reinecke
The queue limits already have a 'chunk_sectors' setting, so we should be presenting it via sysfs. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: Updated Documentation/ABI/testing/sysfs-block] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18block: Add 'zoned' queue limitDamien Le Moal
Add the zoned queue limit to indicate the zoning model of a block device. Defined values are 0 (BLK_ZONED_NONE) for regular block devices, 1 (BLK_ZONED_HA) for host-aware zone block devices and 2 (BLK_ZONED_HM) for host-managed zone block devices. The standards defined drive managed model is not defined here since these block devices do not provide any command for accessing zone information. Drive managed model devices will be reported as BLK_ZONED_NONE. The helper functions blk_queue_zoned_model and bdev_zoned_model return the zoned limit and the functions blk_queue_is_zoned and bdev_is_zoned return a boolean for callers to test if a block device is zoned. The zoned attribute is also exported as a string to applications via sysfs. BLK_ZONED_NONE shows as "none", BLK_ZONED_HA as "host-aware" and BLK_ZONED_HM as "host-managed". Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21blk-mq: register device instead of diskMatias Bjørling
Enable devices without a gendisk instance to register itself with blk-mq and expose the associated multi-queue sysfs entries. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: expose QUEUE_FLAG_DAX in sysfsYigal Korman
Provides the ability to identify DAX enabled devices in userspace. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: add ability to flag write back caching on a deviceJens Axboe
Add an internal helper and flag for setting whether a queue has write back caching, or write through (or none). Add a sysfs file to show this as well, and make it changeable from user space. This will replace the (awkward) blk_queue_flush() interface that drivers currently use to inform the block layer of write cache state and capabilities. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-17blk: fix overflow in queue_discard_max_hw_showAlan
We get this right for queue_discard_max_show but not max_hw_show. Follow the same pattern as queue_discard_max_show instead so that we don't truncate. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-03Merge branch 'mkp-fixes' into fixesJames Bottomley
2015-11-25block/sd: Fix device-imposed transfer length limitsMartin K. Petersen
Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-07block: add block polling supportJens Axboe
Add basic support for polling for specific IO to complete. This uses the cookie that blk-mq passes back, which enables the block layer to pass this cookie to the driver to spin for a specific request. This will be combined with request latency tracking, so we can make qualified decisions about when to poll and when not to. For now, for benchmark purposes, we add a sysfs file that controls whether polling is enabled or not. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-04Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
2015-10-21block: generic request_queue reference countingDan Williams
Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-15block: don't release bdi while request_queue has live referencesTejun Heo
bdi's are initialized in two steps, bdi_init() and bdi_register(), but destroyed in a single step by bdi_destroy() which, for a bdi embedded in a request_queue, is called during blk_cleanup_queue() which makes the queue invisible and starts the draining of remaining usages. A request_queue's user can access the congestion state of the embedded bdi as long as it holds a reference to the queue. As such, it may access the congested state of a queue which finished blk_cleanup_queue() but hasn't reached blk_release_queue() yet. Because the congested state was embedded in backing_dev_info which in turn is embedded in request_queue, accessing the congested state after bdi_destroy() was called was fine. The bdi was destroyed but the memory region for the congested state remained accessible till the queue got released. a13f35e87140 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback") changed the situation. Now, the root congested state which is expected to be pinned while request_queue remains accessible is separately reference counted and the base ref is put during bdi_destroy(). This means that the root congested state may go away prematurely while the queue is between bdi_dstroy() and blk_cleanup_queue(), which was detected by Andrey's KASAN tests. The root cause of this problem is that bdi doesn't distinguish the two steps of destruction, unregistration and release, and now the root congested state actually requires a separate release step. To fix the issue, this patch separates out bdi_unregister() and bdi_exit() from bdi_destroy(). bdi_unregister() is called from blk_cleanup_queue() and bdi_exit() from blk_release_queue(). bdi_destroy() is now just a simple wrapper calling the two steps back-to-back. While at it, the prototype of bdi_destroy() is moved right below bdi_setup_and_register() so that the counterpart operations are located together. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a13f35e87140 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback") Cc: stable@vger.kernel.org # v4.2+ Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com> Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.com Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: make generic_make_request handle arbitrarily sized biosKent Overstreet
The way the block layer is currently written, it goes to great lengths to avoid having to split bios; upper layer code (such as bio_add_page()) checks what the underlying device can handle and tries to always create bios that don't need to be split. But this approach becomes unwieldy and eventually breaks down with stacked devices and devices with dynamic limits, and it adds a lot of complexity. If the block layer could split bios as needed, we could eliminate a lot of complexity elsewhere - particularly in stacked drivers. Code that creates bios can then create whatever size bios are convenient, and more importantly stacked drivers don't have to deal with both their own bio size limitations and the limitations of the (potentially multiple) devices underneath them. In the future this will let us delete merge_bvec_fn and a bunch of other code. We do this by adding calls to blk_queue_split() to the various make_request functions that need it - a few can already handle arbitrary size bios. Note that we add the call _after_ any call to blk_queue_bounce(); this means that blk_queue_split() and blk_recalc_rq_segments() don't need to be concerned with bouncing affecting segment merging. Some make_request_fn() callbacks were simple enough to audit and verify they don't need blk_queue_split() calls. The skipped ones are: * nfhd_make_request (arch/m68k/emu/nfblock.c) * axon_ram_make_request (arch/powerpc/sysdev/axonram.c) * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c) * brd_make_request (ramdisk - drivers/block/brd.c) * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c) * loop_make_request * null_queue_bio * bcache's make_request fns Some others are almost certainly safe to remove now, but will be left for future patches. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Geoff Levand <geoff@infradead.org> Cc: Jim Paris <jim@jtan.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: skip more mq-based drivers, resolve merge conflicts, etc.] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: make /sys/block/<dev>/queue/discard_max_bytes writeableJens Axboe
Lots of devices support huge discard sizes these days. Depending on how the device handles them internally, huge discards can introduce massive latencies (hundreds of msec) on the device side. We have a sysfs file, discard_max_bytes, that advertises the max hardware supported discard size. Make this writeable, and split the settings into a soft and hard limit. This can be set from 'discard_granularity' and up to the hardware limit. Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw set limit. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-25Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
2015-06-02writeback: separate out include/linux/backing-dev-defs.hTejun Heo
With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02blkcg: move block/blk-cgroup.h to include/linux/blk-cgroup.hTejun Heo
cgroup aware writeback support will require exposing some of blkcg details. In preprataion, move block/blk-cgroup.h to include/linux/blk-cgroup.h. This patch is pure file move. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27block: destroy bdi before blockdev is unregistered.NeilBrown
Because of the peculiar way that md devices are created (automatically when the device node is opened), a new device can be created and registered immediately after the blk_unregister_region(disk_devt(disk), disk->minors); call in del_gendisk(). Therefore it is important that all visible artifacts of the previous device are removed before this call. In particular, the 'bdi'. Since: commit c4db59d31e39ea067c32163ac961e9c80198fd37 Author: Christoph Hellwig <hch@lst.de> fs: don't reassign dirty inodes to default_backing_dev_info moved the device_unregister(bdi->dev); call from bdi_unregister() to bdi_destroy() it has been quite easy to lose a race and have a new (e.g.) "md127" be created after the blk_unregister_region() call and before bdi_destroy() is ultimately called by the final 'put_disk', which must come after del_gendisk(). The new device finds that the bdi name is already registered in sysfs and complains > [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70() > [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127' We can fix this by moving the bdi_destroy() call out of blk_release_queue() (which can happen very late when a refcount reaches zero) and into blk_cleanup_queue() - which happens exactly when the md device driver calls it. Then it is only necessary for md to call blk_cleanup_queue() before del_gendisk(). As loop.c devices are also created on demand by opening the device node, we make the same change there. Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37 Reported-by: Azat Khuzhin <a3at.mail@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org (v4.0) Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-29blk-mq: release mq's kobjects in blk_release_queue()Ming Lei
The kobject memory inside blk-mq hctx/ctx shouldn't have been freed before the kobject is released because driver core can access it freely before its release. We can't do that in all ctx/hctx/mq_kobj's release handler because it can be run before blk_cleanup_queue(). Given mq_kobj shouldn't have been introduced, this patch simply moves mq's release into blk_release_queue(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-09blk-mq: Fix a use-after-freeBart Van Assche
blk-mq users are allowed to free the memory request_queue.tag_set points at after blk_cleanup_queue() has finished but before blk_release_queue() has started. This can happen e.g. in the SCSI core. The SCSI core namely embeds the tag_set structure in a SCSI host structure. The SCSI host structure is freed by scsi_host_dev_release(). This function is called after blk_cleanup_queue() finished but can be called before blk_release_queue(). This means that it is not safe to access request_queue.tag_set from inside blk_release_queue(). Hence remove the blk_sync_queue() call from blk_release_queue(). This call is not necessary - outstanding requests must have finished before blk_release_queue() is called. Additionally, move the blk_mq_free_queue() call from blk_release_queue() to blk_cleanup_queue() to avoid that struct request_queue.tag_set gets accessed after it has been freed. This patch avoids that the following kernel oops can be triggered when deleting a SCSI host for which scsi-mq was enabled: Call Trace: [<ffffffff8109a7c4>] lock_acquire+0xc4/0x270 [<ffffffff814ce111>] mutex_lock_nested+0x61/0x380 [<ffffffff812575f0>] blk_mq_free_queue+0x30/0x180 [<ffffffff8124d654>] blk_release_queue+0x84/0xd0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff81245895>] blk_put_queue+0x15/0x20 [<ffffffff8125c409>] disk_release+0x99/0xd0 [<ffffffff8133d056>] device_release+0x36/0xb0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff8125a78a>] put_disk+0x1a/0x20 [<ffffffff811d4cb5>] __blkdev_put+0x135/0x1b0 [<ffffffff811d56a0>] blkdev_put+0x50/0x160 [<ffffffff81199eb4>] kill_block_super+0x44/0x70 [<ffffffff8119a2a4>] deactivate_locked_super+0x44/0x60 [<ffffffff8119a87e>] deactivate_super+0x4e/0x70 [<ffffffff811b9833>] cleanup_mnt+0x43/0x90 [<ffffffff811b98d2>] __cleanup_mnt+0x12/0x20 [<ffffffff8107252c>] task_work_run+0xac/0xe0 [<ffffffff81002c01>] do_notify_resume+0x61/0xa0 [<ffffffff814d2c58>] int_signal+0x12/0x17 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robert Elliott <elliott@hp.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-18Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer changes from Jens Axboe: "This is the core block IO pull request for 3.18. Apart from the new and improved flush machinery for blk-mq, this is all mostly bug fixes and cleanups. - blk-mq timeout updates and fixes from Christoph. - Removal of REQ_END, also from Christoph. We pass it through the ->queue_rq() hook for blk-mq instead, freeing up one of the request bits. The space was overly tight on 32-bit, so Martin also killed REQ_KERNEL since it's no longer used. - blk integrity updates and fixes from Martin and Gu Zheng. - Update to the flush machinery for blk-mq from Ming Lei. Now we have a per hardware context flush request, which both cleans up the code should scale better for flush intensive workloads on blk-mq. - Improve the error printing, from Rob Elliott. - Backing device improvements and cleanups from Tejun. - Fixup of a misplaced rq_complete() tracepoint from Hannes. - Make blk_get_request() return error pointers, fixing up issues where we NULL deref when a device goes bad or missing. From Joe Lawrence. - Prep work for drastically reducing the memory consumption of dm devices from Junichi Nomura. This allows creating clone bio sets without preallocating a lot of memory. - Fix a blk-mq hang on certain combinations of queue depths and hardware queues from me. - Limit memory consumption for blk-mq devices for crash dump scenarios and drivers that use crazy high depths (certain SCSI shared tag setups). We now just use a single queue and limited depth for that" * 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits) block: Remove REQ_KERNEL blk-mq: allocate cpumask on the home node bio-integrity: remove the needless fail handle of bip_slab creating block: include func name in __get_request prints block: make blk_update_request print prefix match ratelimited prefix blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio block: fix alignment_offset math that assumes io_min is a power-of-2 blk-mq: Make bt_clear_tag() easier to read blk-mq: fix potential hang if rolling wakeup depth is too high block: add bioset_create_nobvec() block: use bio_clone_fast() in blk_rq_prep_clone() block: misplaced rq_complete tracepoint sd: Honor block layer integrity handling flags block: Replace strnicmp with strncasecmp block: Add T10 Protection Information functions block: Don't merge requests if integrity flags differ block: Integrity checksum flag block: Relocate bio integrity flags block: Add a disk flag to block integrity profile block: Add prefix to block integrity profile flags ...
2014-09-25blk-mq: support per-distpatch_queue flush machineryMing Lei
This patch supports to run one single flush machinery for each blk-mq dispatch queue, so that: - current init_request and exit_request callbacks can cover flush request too, then the buggy copying way of initializing flush request's pdu can be fixed - flushing performance gets improved in case of multi hw-queue In fio sync write test over virtio-blk(4 hw queues, ioengine=sync, iodepth=64, numjobs=4, bs=4K), it is observed that througput gets increased a lot over my test environment: - throughput: +70% in case of virtio-blk over null_blk - throughput: +30% in case of virtio-blk over SSD image The multi virtqueue feature isn't merged to QEMU yet, and patches for the feature can be found in below tree: git://kernel.ubuntu.com/ming/qemu.git v2.1.0-mq.4 And simply passing 'num_queues=4 vectors=5' should be enough to enable multi queue(quad queue) feature for QEMU virtio-blk. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: remove blk_init_flush() and its pairMing Lei
Now mission of the two helpers is over, and just call blk_alloc_flush_queue() and blk_free_flush_queue() directly. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-25block: introduce blk_init_flush and its pairMing Lei
These two temporary functions are introduced for holding flush initialization and de-initialization, so that we can introduce 'flush queue' easier in the following patch. And once 'flush queue' and its allocation/free functions are ready, they will be removed for sake of code readability. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-24blk-mq, percpu_ref: start q->mq_usage_counter in atomic modeTejun Heo
blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take above ten seconds when scsi-mq is used. [ 0.949892] scsi host0: Virtio SCSI HBA [ 1.007864] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.021299] scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz <stall> [ 16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 16.194099] osd: LOADED open-osd 0.2.1 [ 16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.208478] sd 0:0:0:0: [sda] Write Protect is off [ 16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.223264] sd 0:0:1:0: [sdb] Write Protect is off [ 16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA This is also the reason why request_queues start in bypass mode which is ended on blk_register_queue() as shutting down a fully functional queue also involves a RCU grace period and the queues for non-existent SCSI devices never reach registration. blk-mq basically needs to do the same thing - start the mq in a degraded mode which is faster to shut down and then make it fully functional only after the queue reaches registration. percpu_ref recently grew facilities to force atomic operation until explicitly switched to percpu mode, which can be used for this purpose. This patch makes blk-mq initialize q->mq_usage_counter in atomic mode and switch it to percpu mode only once blk_register_queue() is reached. Note that this issue was previously worked around by 0a30288da1ae ("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe") for v3.17. The temp fix was reverted in preparation of adding persistent atomic mode to percpu_ref by 9eca80461a45 ("Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe""). This patch and the prerequisite percpu_ref changes will be merged during v3.18 devel cycle. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-09Block: fix unbalanced bypass-disable in blk_register_queueAlan Stern
When a queue is registered, the block layer turns off the bypass setting (because bypass is enabled when the queue is created). This doesn't work well for queues that are unregistered and then registered again; we get a WARNING because of the unbalanced calls to blk_queue_bypass_end(). This patch fixes the problem by making blk_register_queue() call blk_queue_bypass_end() only the first time the queue is registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tejun Heo <tj@kernel.org> CC: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01block, blk-mq: draining can't be skipped even if bypass_depth was non-zeroTejun Heo
Currently, both blk_queue_bypass_start() and blk_mq_freeze_queue() skip queue draining if bypass_depth was already above zero. The assumption is that the one which bumped the bypass_depth should have performed draining already; however, there's nothing which prevents a new instance of bypassing/freezing from starting before the previous one finishes draining. The current code may allow the later bypassing/freezing instances to complete while there still are in-flight requests which haven't finished draining. Fix it by draining regardless of bypass_depth. We still skip draining from blk_queue_bypass_start() while the queue is initializing to avoid introducing excessive delays during boot. INIT_DONE setting is moved above the initial blk_queue_bypass_end() so that bypassing attempts can't slip inbetween. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27block: only allocate/free mq_usage_counter in blk-mqMing Lei
The percpu counter is only used for blk-mq, so move its allocation and free inside blk-mq, and don't allocate it for legacy queue device. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-20blk-mq: allow changing of queue depth through sysfsJens Axboe
For request_fn based devices, the block layer exports a 'nr_requests' file through sysfs to allow adjusting of queue depth on the fly. Currently this returns -EINVAL for blk-mq, since it's not wired up. Wire this up for blk-mq, so that it now also always dynamic adjustments of the allowed queue depth for any given block device managed by blk-mq. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-10blk-mq: rework flush sequencing logicChristoph Hellwig
Witch to using a preallocated flush_rq for blk-mq similar to what's done with the old request path. This allows us to set up the request properly with a tag from the actually allowed range and ->rq_disk as needed by some drivers. To make life easier we also switch to dynamic allocation of ->flush_rq for the old path. This effectively reverts most of "blk-mq: fix for flush deadlock" and "blk-mq: Don't reserve a tag for flush request" Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2013-12-31block: blk-mq: don't export blk_mq_free_queue()Ming Lei
blk_mq_free_queue() is called from release handler of queue kobject, so it needn't be called from drivers. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-15kernel: remove CONFIG_USE_GENERIC_SMP_HELPERSChristoph Hellwig
We've switched over every architecture that supports SMP to it, so remove the new useless config variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-25blk-mq: new multi-queue block IO queueing mechanismJens Axboe
Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-11block/blk-sysfs.c: replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-03block: avoid using uninitialized value in from queue_var_storeArnd Bergmann
As found by gcc-4.8, the QUEUE_SYSFS_BIT_FNS macro creates functions that use a value generated by queue_var_store independent of whether that value was set or not. block/blk-sysfs.c: In function 'queue_store_nonrot': block/blk-sysfs.c:244:385: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] Unlike most other such warnings, this one is not a false positive, writing any non-number string into the sysfs files indeed has an undefined result, rather than returning an error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-09block: RCU free request_queueTejun Heo
RCU free request_queue so that blkcg_gq->q can be dereferenced under RCU lock. This will be used to implement hierarchical stats. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-12-06block: Rename queue dead flagBart Van Assche
QUEUE_FLAG_DEAD is used to indicate that queuing new requests must stop. After this flag has been set queue draining starts. However, during the queue draining phase it is still safe to invoke the queue's request_fn, so QUEUE_FLAG_DYING is a better name for this flag. This patch has been generated by running the following command over the kernel source tree: git grep -lEw 'blk_queue_dead|QUEUE_FLAG_DEAD' | xargs sed -i.tmp -e 's/blk_queue_dead/blk_queue_dying/g' \ -e 's/QUEUE_FLAG_DEAD/QUEUE_FLAG_DYING/g'; \ sed -i.tmp -e "s/QUEUE_FLAG_DYING$(printf \\t)*5/QUEUE_FLAG_DYING$(printf \\t)5/g" \ include/linux/blkdev.h; \ sed -i.tmp -e 's/ DEAD/ DYING/g' -e 's/dead queue/a dying queue/' \ -e 's/Dead queue/A dying queue/' block/blk-core.c Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Chanho Min <chanho.min@lge.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-21block: lift the initial queue bypass mode on blk_register_queue() instead of ↵Tejun Heo
blk_init_allocated_queue() b82d4b197c ("blkcg: make request_queue bypassing on allocation") made request_queues bypassed on allocation to avoid switching on and off bypass mode on a queue being initialized. Some drivers allocate and then destroy a lot of queues without fully initializing them and incurring bypass latency overhead on each of them could add upto significant overhead. Unfortunately, blk_init_allocated_queue() is never used by queues of bio-based drivers, which means that all bio-based driver queues are in bypass mode even after initialization and registration complete successfully. Due to the limited way request_queues are used by bio drivers, this problem is hidden pretty well but it shows up when blk-throttle is used in combination with a bio-based driver. Trying to configure (echoing to cgroupfs file) blk-throttle for a bio-based driver hangs indefinitely in blkg_conf_prep() waiting for bypass mode to end. This patch moves the initial blk_queue_bypass_end() call from blk_init_allocated_queue() to blk_register_queue() which is called for any userland-visible queues regardless of its type. I believe this is correct because I don't think there is any block driver which needs or wants working elevator and blk-cgroup on a queue which isn't visible to userland. If there are such users, we need a different solution. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au> Cc: stable@vger.kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20block: Implement support for WRITE SAMEMartin K. Petersen
The WRITE SAME command supported on some SCSI devices allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O. This patch implements support for WRITE SAME in the block layer. The blkdev_issue_write_same() function can be used by filesystems and block drivers to replicate a buffer across a block range. This can be used to efficiently initialize software RAID devices, etc. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>