summaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)Author
2023-10-27crypto: xcbc - remove unnecessary alignment logicEric Biggers
The xcbc template is setting its alignmask to that of its underlying 'cipher'. Yet, it doesn't care itself about how its inputs and outputs are aligned, which is ostensibly the point of the alignmask. Instead, xcbc actually just uses its alignmask itself to runtime-align certain fields in its tfm and desc contexts appropriately for its underlying cipher. That is almost entirely pointless too, though, since xcbc is already using the cipher API functions that handle alignment themselves, and few ciphers set a nonzero alignmask anyway. Also, even without runtime alignment, an alignment of at least 4 bytes can be guaranteed. Thus, at best this code is optimizing for the rare case of ciphers that set an alignmask >= 7, at the cost of hurting the common cases. Therefore, this patch removes the manual alignment code from xcbc and makes it stop setting an alignmask. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: vmac - don't set alignmaskEric Biggers
The vmac template is setting its alignmask to that of its underlying 'cipher'. This doesn't actually accomplish anything useful, though, so stop doing it. (vmac_update() does have an alignment bug, where it assumes u64 alignment when it shouldn't, but that bug exists both before and after this patch.) This is a prerequisite for removing support for nonzero alignmasks from shash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: hmac - remove unnecessary alignment logicEric Biggers
The hmac template is setting its alignmask to that of its underlying unkeyed hash algorithm, and it is aligning the ipad and opad fields in its tfm context to that alignment. However, hmac does not actually need any sort of alignment itself, which makes this pointless except to keep the pads aligned to what the underlying algorithm prefers. But very few shash algorithms actually set an alignmask, and it is being removed from those remaining ones; also, after setkey, the pads are only passed to crypto_shash_import and crypto_shash_export which ignore the alignmask. Therefore, make the hmac template stop setting an alignmask and simply use natural alignment for ipad and opad. Note, this change also moves the pads from the beginning of the tfm context to the end, which makes much more sense; the variable-length fields should be at the end. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: cmac - remove unnecessary alignment logicEric Biggers
The cmac template is setting its alignmask to that of its underlying 'cipher'. Yet, it doesn't care itself about how its inputs and outputs are aligned, which is ostensibly the point of the alignmask. Instead, cmac actually just uses its alignmask itself to runtime-align certain fields in its tfm and desc contexts appropriately for its underlying cipher. That is almost entirely pointless too, though, since cmac is already using the cipher API functions that handle alignment themselves, and few ciphers set a nonzero alignmask anyway. Also, even without runtime alignment, an alignment of at least 4 bytes can be guaranteed. Thus, at best this code is optimizing for the rare case of ciphers that set an alignmask >= 7, at the cost of hurting the common cases. Therefore, this patch removes the manual alignment code from cmac and makes it stop setting an alignmask. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: cbcmac - remove unnecessary alignment logicEric Biggers
The cbcmac template is aligning a field in its desc context to the alignmask of its underlying 'cipher', at runtime. This is almost entirely pointless, since cbcmac is already using the cipher API functions that handle alignment themselves, and few ciphers set a nonzero alignmask anyway. Also, even without runtime alignment, an alignment of at least 4 bytes can be guaranteed. Thus, at best this code is optimizing for the rare case of ciphers that set an alignmask >= 7, at the cost of hurting the common cases. Therefore, remove the manual alignment code from cbcmac. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: shash - eliminate indirect call for default import and exportEric Biggers
Most shash algorithms don't have custom ->import and ->export functions, resulting in the memcpy() based default being used. Yet, crypto_shash_import() and crypto_shash_export() still make an indirect call, which is expensive. Therefore, change how the default import and export are called to make it so that crypto_shash_import() and crypto_shash_export() don't do an indirect call in this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27crypto: rsa - Add module alias for pkcs1padHerbert Xu
Add a module alias for pkcs1pas so that it can be auto-loaded by modprobe. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-27certs: Break circular dependency when selftest is modularHerbert Xu
The modular build fails because the self-test code depends on pkcs7 which in turn depends on x509 which contains the self-test. Split the self-test out into its own module to break the cycle. Fixes: 3cde3174eb91 ("certs: Add FIPS selftests") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: skcipher - fix weak key check for lskciphersEric Biggers
When an algorithm of the new "lskcipher" type is exposed through the "skcipher" API, calls to crypto_skcipher_setkey() don't pass on the CRYPTO_TFM_REQ_FORBID_WEAK_KEYS flag to the lskcipher. This causes self-test failures for ecb(des), as weak keys are not rejected anymore. Fix this. Fixes: 31865c4c4db2 ("crypto: skcipher - Add lskcipher") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: lskcipher - Return EINVAL when ecb_name fails sanity checksHerbert Xu
Set the error value to -EINVAL instead of zero when the underlying name (within "ecb()") fails basic sanity checks. Fixes: 8aee5d4ebd11 ("crypto: lskcipher - Add compatibility wrapper around ECB") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202310111323.ZjK7bzjw-lkp@intel.com/ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: mscode_parser - remove sha224 authenticode supportDimitri John Ledkov
It is possible to stand up own certificates and sign PE-COFF binaries using SHA-224. However it never became popular or needed since it has similar costs as SHA-256. Windows Authenticode infrastructure never had support for SHA-224, and all secureboot keys used fro linux vmlinuz have always been using at least SHA-256. Given the point of mscode_parser is to support interoperatiblity with typical de-facto hashes, remove support for SHA-224 to avoid posibility of creating interoperatibility issues with rhboot/shim, grub, and non-linux systems trying to sign or verify vmlinux. SHA-224 itself is not removed from the kernel, as it is truncated SHA-256. If requested I can write patches to remove SHA-224 support across all of the drivers. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: pkcs7 - remove sha1 supportDimitri John Ledkov
Removes support for sha1 signed kernel modules, importing sha1 signed x.509 certificates. rsa-pkcs1pad keeps sha1 padding support, which seems to be used by virtio driver. sha1 remains available as there are many drivers and subsystems using it. Note only hmac(sha1) with secret keys remains cryptographically secure. In the kernel there are filesystems, IMA, tpm/pcr that appear to be using sha1. Maybe they can all start to be slowly upgraded to something else i.e. blake3, ParallelHash, SHAKE256 as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: adiantum - add fast path for single-page messagesEric Biggers
When the source scatterlist is a single page, optimize the first hash step of adiantum to use crypto_shash_digest() instead of init/update/final, and use the same local kmap for both hashing the bulk part and loading the narrow part of the source data. Likewise, when the destination scatterlist is a single page, optimize the second hash step of adiantum to use crypto_shash_digest() instead of init/update/final, and use the same local kmap for both hashing the bulk part and storing the narrow part of the destination data. In some cases these optimizations improve performance significantly. Note: ideally, for optimal performance each architecture should implement the full "adiantum(xchacha12,aes)" algorithm and fully optimize the contiguous buffer case to use no indirect calls. That's not something I've gotten around to doing, though. This commit just makes a relatively small change that provides some benefit with the existing template-based approach. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: shash - fold shash_digest_unaligned() into crypto_shash_digest()Eric Biggers
Fold shash_digest_unaligned() into its only remaining caller. Also, avoid a redundant check of CRYPTO_TFM_NEED_KEY by replacing the call to crypto_shash_init() with shash->init(desc). Finally, replace shash_update_unaligned() + shash_final_unaligned() with shash_finup_unaligned() which does exactly that. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: shash - optimize the default digest and finupEric Biggers
For an shash algorithm that doesn't implement ->digest, currently crypto_shash_digest() with aligned input makes 5 indirect calls: 1 to shash_digest_unaligned(), 1 to ->init, 2 to ->update ('alignmask + 1' bytes, then the rest), then 1 to ->final. This is true even if the algorithm implements ->finup. This is caused by an unnecessary fallback to code meant to handle unaligned inputs. In fact, crypto_shash_digest() already does the needed alignment check earlier. Therefore, optimize the number of indirect calls for aligned inputs to 3 when the algorithm implements ->finup. It remains at 5 when the algorithm implements neither ->finup nor ->digest. Similarly, for an shash algorithm that doesn't implement ->finup, currently crypto_shash_finup() with aligned input makes 4 indirect calls: 1 to shash_finup_unaligned(), 2 to ->update, and 1 to ->final. Optimize this to 3 calls. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-20crypto: xts - use 'spawn' for underlying single-block cipherEric Biggers
Since commit adad556efcdd ("crypto: api - Fix built-in testing dependency failures"), the following warning appears when booting an x86_64 kernel that is configured with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y, even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y: alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable This is caused by an issue in the xts template where it allocates an "aes" single-block cipher without declaring a dependency on it via the crypto_spawn mechanism. This issue was exposed by the above commit because it reversed the order that the algorithms are tested in. Specifically, when "xts(ecb(aes-generic))" is instantiated and tested during the comparison tests for "xts-aes-aesni", the "xts" template allocates an "aes" crypto_cipher for encrypting tweaks. This resolves to "aes-aesni". (Getting "aes-aesni" instead of "aes-generic" here is a bit weird, but it's apparently intended.) Due to the above-mentioned commit, the testing of "aes-aesni", and the finalization of its registration, now happens at this point instead of before. At the end of that, crypto_remove_spawns() unregisters all algorithm instances that depend on a lower-priority "aes" implementation such as "aes-generic" but that do not depend on "aes-aesni". However, because "xts" does not use the crypto_spawn mechanism for its "aes", its dependency on "aes-aesni" is not recognized by crypto_remove_spawns(). Thus, crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))". Fix this issue by making the "xts" template use the crypto_spawn mechanism for its "aes" dependency, like what other templates do. Note, this fix could be applied as far back as commit f1c131b45410 ("crypto: xts - Convert to skcipher"). However, the issue only got exposed by the much more recent changes to how the crypto API runs the self-tests, so there should be no need to backport this to very old kernels. Also, an alternative fix would be to flip the list iteration order in crypto_start_tests() to restore the original testing order. I'm thinking we should do that too, since the original order seems more natural, but it shouldn't be relied on for correctness. Fixes: adad556efcdd ("crypto: api - Fix built-in testing dependency failures") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-18KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hashHerbert Xu
The new sign/verify code broke the case of pkcs1pad without a hash algorithm. Fix it by setting issig correctly for this case. Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists") Cc: stable@vger.kernel.org # v6.5 Reported-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: jitter - reuse allocated entropy collectorStephan Müller
In case a health test error occurs during runtime, the power-up health tests are rerun to verify that the noise source is still good and that the reported health test error was an outlier. For performing this power-up health test, the already existing entropy collector instance is used instead of allocating a new one. This change has the following implications: * The noise that is collected as part of the newly run health tests is inserted into the entropy collector and thus stirs the existing data present in there further. Thus, the entropy collected during the health test is not wasted. This is also allowed by SP800-90B. * The power-on health test is not affected by the state of the entropy collector, because it resets the APT / RCT state. The remainder of the state is unrelated to the health test as it is only applied to newly obtained time stamps. This change also fixes a bug report about an allocation while in an atomic lock (the lock is taken in jent_kcapi_random, jent_read_entropy is called and this can call jent_entropy_init). Fixes: 04597c8dd6c4 ("jitter - add RCT/APT support for different OSRs") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: xts - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: lrw - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: hctr2 - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: gcm - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: cts - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: ctr - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: chacha20poly1305 - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: ccm - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: authencesn - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: authenc - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: adiantum - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: cryptd - Only access common skcipher fields on spawnHerbert Xu
As skcipher spawns may be of the type lskcipher, only the common fields may be accessed. This was already the case but use the correct helpers to make this more obvious. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: essiv - Handle lskcipher spawnsHerbert Xu
Add code to handle an underlying lskcihper object when grabbing an skcipher spawn. Fixes: 31865c4c4db2 ("crypto: skcipher - Add lskcipher") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: arc4 - Convert from skcipher to lskcipherHerbert Xu
Replace skcipher implementation with lskcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-13crypto: skcipher - Add dependency on ecbHerbert Xu
As lskcipher requires the ecb wrapper for the transition add an explicit dependency on it so that it is always present. This can be removed once all simple ciphers have been converted to lskcipher. Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 705b52fef3c7 ("crypto: cbc - Convert from skcipher to lskcipher") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-12crypto: testmgr - Remove zlib-deflateHerbert Xu
Remove zlib-deflate test vectors as it no longer exists in the kernel. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-10-12crypto: deflate - Remove zlib-deflateHerbert Xu
Remove the implementation of zlib-deflate because it is completely unused in the kernel. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-10-05crypto: pkcs7 - remove md4 md5 x.509 supportDimitri John Ledkov
Remove support for md4 md5 hash and signatures in x.509 certificate parsers, pkcs7 signature parser, authenticode parser. All of these are insecure or broken, and everyone has long time ago migrated to alternative hash implementations. Also remove md2 & md3 oids which have already didn't have support. This is also likely the last user of md4 in the kernel, and thus crypto/md4.c and related tests in tcrypt & testmgr can likely be removed. Other users such as cifs smbfs ext modpost sumversions have their own internal implementation as needed. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-05X.509: Add missing IMPLICIT annotations to AKID ASN.1 moduleLukas Wunner
The ASN.1 module in RFC 5280 appendix A.1 uses EXPLICIT TAGS whereas the one in appendix A.2 uses IMPLICIT TAGS. The kernel's simplified asn1_compiler.c always uses EXPLICIT TAGS, hence definitions from appendix A.2 need to be annotated as IMPLICIT for the compiler to generate RFC-compliant code. In particular, GeneralName is defined in appendix A.2: GeneralName ::= CHOICE { otherName [0] OtherName, ... dNSName [2] IA5String, x400Address [3] ORAddress, directoryName [4] Name, ... } Because appendix A.2 uses IMPLICIT TAGS, the IA5String tag (0x16) of a dNSName is not rendered. Instead, the string directly succeeds the [2] tag (0x82). Likewise, the SEQUENCE tag (0x30) of an OtherName is not rendered. Instead, only the constituents of the SEQUENCE are rendered: An OID tag (0x06), a [0] tag (0xa0) and an ANY tag. That's three consecutive tags instead of a single encompassing tag. The situation is different for x400Address and directoryName choices: They reference ORAddress and Name, which are defined in appendix A.1, therefore use EXPLICIT TAGS. The AKID ASN.1 module is missing several IMPLICIT annotations, hence isn't RFC-compliant. In the unlikely event that an AKID contains other elements beside a directoryName, users may see parse errors. Add the missing annotations but do not tag this commit for stable as I am not aware of any issue reports. Fixes are only eligible for stable if they're "obviously correct" and with ASN.1 there's no such thing. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01crypto: engine - Make crypto_engine_exit() return voidUwe Kleine-König
All callers ignore the return value, so simplify by not providing one. Note that crypto_engine_exit() is typically called in a device driver's remove path (or the error path in probe), where errors cannot be handled anyhow. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01crypto: jitter - Allow configuration of oversampling rateStephan Müller
The oversampling rate used by the Jitter RNG allows the configuration of the heuristically implied entropy in one timing measurement. This entropy rate is (1 / OSR) bits of entropy per time stamp. Considering that the Jitter RNG now support APT/RCT health tests for different OSRs, allow this value to be configured at compile time to support systems with limited amount of entropy in their timer. The allowed range of OSR values complies with the APT/RCT cutoff health test values which range from 1 through 15. The default value of the OSR selection support is left at 1 which is the current default. Thus, the addition of the configuration support does not alter the default Jitter RNG behavior. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01crypto: jitter - Allow configuration of memory sizeStephan Müller
The memory size consumed by the Jitter RNG is one contributing factor in the amount of entropy that is gathered. As the amount of entropy directly correlates with the distance of the memory from the CPU, the caches that are possibly present on a given system have an impact on the collected entropy. Thus, the kernel compile time should offer a means to configure the amount of memory used by the Jitter RNG. Although this option could be turned into a runtime option (e.g. a kernel command line option), it should remain a compile time option as otherwise adminsitrators who may not have performed an entropy assessment may select a value that is inappropriate. The default value selected by the configuration is identical to the current Jitter RNG value. Thus, the patch should not lead to any change in the Jitter RNG behavior. To accommodate larger memory buffers, kvzalloc / kvfree is used. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01crypto: jitter - add RCT/APT support for different OSRsStephan Müller
The oversampling rate (OSR) value specifies the heuristically implied entropy in the recorded data - H_submitter = 1/osr. A different entropy estimate implies a different APT/RCT cutoff value. This change adds support for OSRs 1 through 15. This OSR can be selected by the caller of the Jitter RNG. For this patch, the caller still uses one hard-coded OSR. A subsequent patch allows this value to be configured. In addition, the power-up self test is adjusted as follows: * It allows the caller to provide an oversampling rate that should be tested with - commonly it should be the same as used for the actual runtime operation. This makes the power-up testing therefore consistent with the runtime operation. * It calls now jent_measure_jitter (i.e. collects the full entropy that can possibly be harvested by the Jitter RNG) instead of only jent_condition_data (which only returns the entropy harvested from the conditioning component). This should now alleviate reports where the Jitter RNG initialization thinks there is too little entropy. * The power-up test now solely relies on the (enhanced) APT and RCT test that is used as a health test at runtime. The code allowing the different OSRs as well as the power-up test changes are present in the user space version of the Jitter RNG 3.4.1 and thus was already in production use for some time. Reported-by "Ospan, Abylay" <aospan@amazon.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: cbc - Convert from skcipher to lskcipherHerbert Xu
Replace the existing skcipher CBC template with an lskcipher version. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: ecb - Convert from skcipher to lskcipherHerbert Xu
This patch adds two different implementations of ECB. First of all an lskcipher wrapper around existing ciphers is introduced as a temporary transition aid. Secondly a permanent lskcipher template is also added. It's simply a wrapper around the underlying lskcipher algorithm. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: testmgr - Add support for lskcipher algorithmsHerbert Xu
Test lskcipher algorithms using the same logic as cipher algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: lskcipher - Add compatibility wrapper around ECBHerbert Xu
As an aid to the transition from cipher algorithm implementations to lskcipher, add a temporary wrapper when creating simple lskcipher templates by using ecb(X) instead of X if an lskcipher implementation of X cannot be found. This can be reverted once all cipher implementations have switched over to lskcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: skcipher - Add lskcipherHerbert Xu
Add a new API type lskcipher designed for taking straight kernel pointers instead of SG lists. Its relationship to skcipher will be analogous to that between shash and ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: hash - Hide CRYPTO_ALG_TYPE_AHASH_MASKHerbert Xu
Move the macro CRYPTO_ALG_TYPE_AHASH_MASK out of linux/crypto.h and into crypto/ahash.c so that it's not visible to users of the Crypto API. Also remove the unused CRYPTO_ALG_TYPE_HASH_MASK macro. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: aead - Add crypto_has_aeadHerbert Xu
Add the helper crypto_has_aead. This is meant to replace the existing use of crypto_has_alg to locate AEAD algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: api - Remove unnecessary NULL initialisationLi zeming
tfm is assigned first, so it does not need to initialize the assignment. Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: sm2 - Fix crash caused by uninitialized contextTianjia Zhang
In sm2_compute_z_digest() function, the newly allocated structure mpi_ec_ctx is used, but forget to initialize it, which will cause a crash when performing subsequent operations. Fixes: e5221fa6a355 ("KEYS: asymmetric: Move sm2 code into x509_public_key") Cc: stable@vger.kernel.org # v6.5 Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>