summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2020-07-03Merge branch 'acpi-fan'Rafael J. Wysocki
* acpi-fan: ACPI: fan: Fix Tiger Lake ACPI device ID
2020-06-30ACPI: fan: Fix Tiger Lake ACPI device IDSumeet Pawnikar
Tiger Lake's new unique ACPI device ID for Fan is not valid because of missing 'C' in the ID. Use correct fan device ID. Fixes: c248dfe7e0ca ("ACPI: fan: Add Tiger Lake ACPI device ID") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-29ACPI: DPTF: Add battery participant for TigerLakeSrinivas Pandruvada
Add DPTF battery participant ACPI ID for platforms based on the Intel TigerLake SoC. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-26Merge branch 'acpi-sysfs'Rafael J. Wysocki
* acpi-sysfs: ACPI: sysfs: Fix pm_profile_attr type
2020-06-22ACPI: sysfs: Fix pm_profile_attr typeNathan Chancellor
When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051 Reported-by: yuu ichii <byahu140@heisei.be> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-22ACPI: configfs: Disallow loading ACPI tables when locked downJason A. Donenfeld
Like other vectors already patched, this one here allows the root user to load ACPI tables, which enables arbitrary physical address writes, which in turn makes it possible to disable lockdown. Prevents this by checking the lockdown status before allowing a new ACPI table to be installed. The link in the trailer shows a PoC of how this might be used. Link: https://git.zx2c4.com/american-unsigned-language/tree/american-unsigned-language-2.sh Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-13Merge tag 'libnvdimm-for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Small collection of cleanups to rework usage of ->queuedata and the GUID api" * tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using ->queuedata nvdimm/btt: stop using ->queuedata nvdimm/blk: stop using ->queuedata libnvdimm: Replace guid_copy() with import_guid() where it makes sense
2020-06-11Merge branch 'x86/entry' into ras/coreThomas Gleixner
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow up patches can be applied without creating a horrible merge conflict afterwards.
2020-06-10Merge tag 'acpi-5.8-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Update the ACPICA code in the kernel to upstream revision 20200528 with the following changes: - Remove some dead code from the acpidump utility (Bob Moore) - Add new OperationRegion subtype keyword PlatformRtMechanism to the compiler (Erik Kaneda)" * tag 'acpi-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Update version to 20200528 ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism ACPICA: acpidump: Removed dead code from oslinuxtbl.c
2020-06-10Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - virtio-mem: paravirtualized memory hotplug - support doorbell mapping for vdpa - config interrupt support in ifc - fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits) vhost/test: fix up after API change virtio_mem: convert device block size into 64bit virtio-mem: drop unnecessary initialization ifcvf: implement config interrupt in IFCVF vhost: replace -1 with VHOST_FILE_UNBIND in ioctls vhost_vdpa: Support config interrupt in vdpa ifcvf: ignore continuous setting same status value virtio-mem: Don't rely on implicit compiler padding for requests virtio-mem: Try to unplug the complete online memory block first virtio-mem: Use -ETXTBSY as error code if the device is busy virtio-mem: Unplug subblocks right-to-left virtio-mem: Drop manual check for already present memory virtio-mem: Add parent resource for all added "System RAM" virtio-mem: Better retry handling virtio-mem: Offline and remove completely unplugged memory blocks mm/memory_hotplug: Introduce offline_and_remove_memory() virtio-mem: Allow to offline partially unplugged memory blocks mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE virtio-mem: Paravirtualized memory hotunplug part 2 virtio-mem: Paravirtualized memory hotunplug part 1 ...
2020-06-10Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200528 ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism ACPICA: acpidump: Removed dead code from oslinuxtbl.c
2020-06-10Merge branches 'pm-cpufreq' and 'pm-acpi'Rafael J. Wysocki
* pm-cpufreq: cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag * pm-acpi: ACPI: PM: Avoid using power resources if there are none for D0
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08ACPI: PM: Avoid using power resources if there are none for D0Rafael J. Wysocki
As recently reported, some platforms provide a list of power resources for device power state D3hot, through the _PR3 object, but they do not provide a list of power resources for device power state D0. Among other things, this causes acpi_device_get_power() to return D3hot as the current state of the device in question if all of the D3hot power resources are "on", because it sees the power_resources flag set and calls acpi_power_get_inferred_state() which finds that D3hot is the shallowest power state with all of the associated power resources turned "on", so that's what it returns. Moreover, that value takes precedence over the acpi_dev_pm_explicit_get() return value, because it means a deeper power state. The device may very well be in D0 physically at that point, however. Moreover, the presence of _PR3 without _PR0 for a given device means that only one D3-level power state can be supported by it. Namely, because there are no power resources to turn "off" when transitioning the device from D0 into D3cold (which should be supported since _PR3 is present), the evaluation of _PS3 should be sufficient to put it straight into D3cold, but this means that the effect of turning "on" the _PR3 power resources is unclear, so it is better to avoid doing that altogether. Consequently, there is no practical way do distinguish D3cold from D3hot for the device in question and the power states of it can be labeled so that D3hot is the deepest supported one (and Linux assumes that putting a device into D3hot via ACPI may cause power to be removed from it anyway, for legacy reasons). To work around the problem described above modify the ACPI enumeration of devices so that power resources are only used for device power management if the list of D0 power resources is not empty and make it mart D3cold as supported only if that is the case and the D3hot list of power resources is not empty too. Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057 Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/ Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: youling257@gmail.com Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-05ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanismErik Kaneda
ACPICA commit 2c2eefa827bd37297f5f9ca4b263fcba829aaf3f Link: https://github.com/acpica/acpica/commit/2c2eefa8 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-04virtio-mem: Allow to specify an ACPI PXM as nidDavid Hildenbrand
We want to allow to specify (similar as for a DIMM), to which node a virtio-mem device (and, therefore, its memory) belongs. Add a new virtio-mem feature flag and export pxm_to_node, so it can be used in kernel module context. Acked-by: Michal Hocko <mhocko@suse.com> # for the export Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> # for the export Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Len Brown <lenb@kernel.org> Cc: linux-acpi@vger.kernel.org Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200507140139.17083-4-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-04Merge branch 'remotes/lorenzo/pci/host-generic'Bjorn Helgaas
- Constify struct pci_ecam_ops (Rob Herring) - Support building as modules (Rob Herring) - Eliminate wrappers for pci_host_common_probe() by using DT match table data (Rob Herring) * remotes/lorenzo/pci/host-generic: PCI: host-generic: Eliminate pci_host_common_probe wrappers PCI: host-generic: Support building as modules PCI: Constify struct pci_ecam_ops # Conflicts: # drivers/pci/controller/dwc/pcie-hisi.c
2020-06-04Merge branch 'pci/misc'Bjorn Helgaas
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas) - Check for platform_get_irq() failure consistently (Bjorn Helgaas) - Replace zero-length array with flexible-array (Gustavo A. R. Silva) - Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang) - Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun Lee) - Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang) - Rename _DSM constants to align with spec (Krzysztof Wilczyński) * pci/misc: PCI: Rename _DSM constants to align with spec PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove() x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port() PCI: Replace zero-length array with flexible-array PCI: Check for platform_get_irq() failure consistently driver core: platform: Clarify that IRQ 0 is invalid
2020-06-02Merge tag 'acpi-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20200430, fix several reference counting errors related to ACPI tables, add _Exx / _Lxx support to the GED driver, add a new acpi_evaluate_reg() helper, add new DPTF battery participant driver and extend the DPFT power participant driver, improve the handling of memory failures in the APEI code, add a blacklist entry to the backlight driver, update the PMIC driver and the processor idle driver, fix two kobject reference count leaks, and make a few janitory changes. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200430: - Move acpi_gbl_next_cmd_num definition (Erik Kaneda). - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing create operators (Erik Kaneda). - Add status checks to the dispatcher (Erik Kaneda). - Fix required parameters for _NIG and _NIH (Erik Kaneda). - Make acpi_protocol_lengths static (Yue Haibing). - Fix ACPI table reference counting errors in several places, mostly in error code paths (Hanjun Guo). - Extend the Generic Event Device (GED) driver to support _Exx and _Lxx handler methods (Ard Biesheuvel). - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug code to use it (Hans de Goede). - Add new DPTF battery participant driver and make the DPFT power participant driver create more sysfs device attributes (Srinivas Pandruvada). - Improve the handling of memory failures in APEI (James Morse). - Add new blacklist entry for Acer TravelMate 5735Z to the backlight driver (Paul Menzel). - Add i2c address for thermal control to the PMIC driver (Mauro Carvalho Chehab). - Allow the ACPI processor idle driver to work on platforms with only one ACPI C-state present (Zhang Rui). - Fix kobject reference count leaks in error code paths in two places (Qiushi Wu). - Delete unused proc filename macros and make some symbols static (Pascal Terjan, Zheng Zengkai, Zou Wei)" * tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile() ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver ACPI: video: Use native backlight on Acer TravelMate 5735Z arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() ACPI / PMIC: Add i2c address for thermal control ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper ACPI: debug: Make two functions static ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ...
2020-06-02Merge tag 'pm-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the system-wide PM driver flags, make runtime switching of cpuidle governors easier, improve the user space hibernation interface code, add intel-speed-select interface documentation, add more debug messages to the ACPI code handling suspend to idle, update the cpufreq core and drivers, fix a minor issue in the cpuidle core and update two cpuidle drivers, improve the PM-runtime framework, update the Intel RAPL power capping driver, update devfreq core and drivers, and clean up the cpupower utility. Specifics: - Rework the system-wide PM driver flags to make them easier to understand and use and update their documentation (Rafael Wysocki, Alan Stern). - Allow cpuidle governors to be switched at run time regardless of the kernel configuration and update the related documentation accordingly (Hanjun Guo). - Improve the resume device handling in the user space hibernarion interface code (Domenico Andreoli). - Document the intel-speed-select sysfs interface (Srinivas Pandruvada). - Make the ACPI code handing suspend to idle print more debug messages to help diagnose issues with it (Rafael Wysocki). - Fix a helper routine in the cpufreq core and correct a typo in the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang Wenhu). - Update cpufreq drivers: - Make the intel_pstate driver start in the passive mode by default on systems without HWP (Rafael Wysocki). - Add i.MX7ULP support to the imx-cpufreq-dt driver and add i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan). - Convert the qoriq cpufreq driver to a platform one, make the platform code create a suitable device object for it and add platform dependencies to it (Mian Yousaf Kaukab, Geert Uytterhoeven). - Fix wrong compatible binding in the qcom driver (Ansuel Smith). - Build the omap driver by default for ARCH_OMAP2PLUS (Anders Roxell). - Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar). - Update cpuidle core and drivers: - Fix three reference count leaks in error code paths in the cpuidle core (Qiushi Wu). - Convert Qualcomm SPM to a generic cpuidle driver (Stephan Gerhold). - Fix up the execution order when entering a domain idle state in the PSCI driver (Ulf Hansson). - Fix a reference counting issue related to clock management and clean up two oddities in the PM-runtime framework (Rafael Wysocki, Andy Shevchenko). - Add ElkhartLake support to the Intel RAPL power capping driver and remove an unused local MSR definition from it (Jacob Pan, Sumeet Pawnikar). - Update devfreq core and drivers: - Replace strncpy() with strscpy() in the devfreq core and use lockdep asserts instead of manual checks for a locked mutex in it (Dmitry Osipenko, Krzysztof Kozlowski). - Add a generic imx bus scaling driver and make it register an interconnect device (Leonard Crestez, Gustavo A. R. Silva). - Make the cpufreq notifier in the tegra30 driver take boosting into account and delete an unuseful error message from that driver (Dmitry Osipenko, Markus Elfring). - Remove unneeded semicolon from the cpupower code (Zou Wei)" * tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits) cpuidle: Fix three reference count leaks PM: runtime: Replace pm_runtime_callbacks_present() PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting PM: hibernate: Restrict writes to the resume device PM: runtime: clk: Fix clk_pm_runtime_get() error path cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver ACPI: EC: PM: s2idle: Extend GPE dispatching debug message ACPI: PM: s2idle: Print type of wakeup debug messages powercap: RAPL: remove unused local MSR define PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() Documentation: admin-guide: pm: Document intel-speed-select PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling Documentation: ABI: make current_governer_ro as a candidate for removal ...
2020-06-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ...
2020-06-02mm: remove vmalloc_sync_(un)mappings()Joerg Roedel
These functions are not needed anymore because the vmalloc and ioremap mappings are now synchronized when they are created or torn down. Remove all callers and function definitions. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200515140023.25469-7-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A sizeable pile of arm64 updates for 5.8. Summary below, but the big two features are support for Branch Target Identification and Clang's Shadow Call stack. The latter is currently arm64-only, but the high-level parts are all in core code so it could easily be adopted by other architectures pending toolchain support Branch Target Identification (BTI): - Support for ARMv8.5-BTI in both user- and kernel-space. This allows branch targets to limit the types of branch from which they can be called and additionally prevents branching to arbitrary code, although kernel support requires a very recent toolchain. - Function annotation via SYM_FUNC_START() so that assembly functions are wrapped with the relevant "landing pad" instructions. - BPF and vDSO updates to use the new instructions. - Addition of a new HWCAP and exposure of BTI capability to userspace via ID register emulation, along with ELF loader support for the BTI feature in .note.gnu.property. - Non-critical fixes to CFI unwind annotations in the sigreturn trampoline. Shadow Call Stack (SCS): - Support for Clang's Shadow Call Stack feature, which reserves platform register x18 to point at a separate stack for each task that holds only return addresses. This protects function return control flow from buffer overruns on the main stack. - Save/restore of x18 across problematic boundaries (user-mode, hypervisor, EFI, suspend, etc). - Core support for SCS, should other architectures want to use it too. - SCS overflow checking on context-switch as part of the existing stack limit check if CONFIG_SCHED_STACK_END_CHECK=y. CPU feature detection: - Removed numerous "SANITY CHECK" errors when running on a system with mismatched AArch32 support at EL1. This is primarily a concern for KVM, which disabled support for 32-bit guests on such a system. - Addition of new ID registers and fields as the architecture has been extended. Perf and PMU drivers: - Minor fixes and cleanups to system PMU drivers. Hardware errata: - Unify KVM workarounds for VHE and nVHE configurations. - Sort vendor errata entries in Kconfig. Secure Monitor Call Calling Convention (SMCCC): - Update to the latest specification from Arm (v1.2). - Allow PSCI code to query the SMCCC version. Software Delegated Exception Interface (SDEI): - Unexport a bunch of unused symbols. - Minor fixes to handling of firmware data. Pointer authentication: - Add support for dumping the kernel PAC mask in vmcoreinfo so that the stack can be unwound by tools such as kdump. - Simplification of key initialisation during CPU bringup. BPF backend: - Improve immediate generation for logical and add/sub instructions. vDSO: - Minor fixes to the linker flags for consistency with other architectures and support for LLVM's unwinder. - Clean up logic to initialise and map the vDSO into userspace. ACPI: - Work around for an ambiguity in the IORT specification relating to the "num_ids" field. - Support _DMA method for all named components rather than only PCIe root complexes. - Minor other IORT-related fixes. Miscellaneous: - Initialise debug traps early for KGDB and fix KDB cacheflushing deadlock. - Minor tweaks to early boot state (documentation update, set TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections). - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h KVM: arm64: Check advertised Stage-2 page size capability arm64/cpufeature: Add get_arm64_ftr_reg_nowarn() ACPI/IORT: Remove the unused __get_pci_rid() arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register arm64/cpufeature: Add remaining feature bits in ID_PFR0 register arm64/cpufeature: Introduce ID_MMFR5 CPU register arm64/cpufeature: Introduce ID_DFR1 CPU register arm64/cpufeature: Introduce ID_PFR2 CPU register arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register arm64: mm: Add asid_gen_match() helper firmware: smccc: Fix missing prototype warning for arm_smccc_version_init arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction ...
2020-06-01Merge branches 'acpi-apei', 'acpi-pmic', 'acpi-video' and 'acpi-dptf'Rafael J. Wysocki
* acpi-apei: arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() * acpi-pmic: ACPI / PMIC: Add i2c address for thermal control * acpi-video: ACPI: video: Use native backlight on Acer TravelMate 5735Z * acpi-dptf: ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver
2020-06-01Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-dbg', 'acpi-misc' and ↵Rafael J. Wysocki
'acpi-pci' * acpi-processor: ACPI: processor: idle: Allow probing on platforms with one ACPI C-state * acpi-cppc: ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: CPPC: Make some symbols static * acpi-dbg: ACPI: debug: Make two functions static * acpi-misc: ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros * acpi-pci: ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper
2020-06-01Merge branches 'acpica' and 'acpi-tables'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200430 ACPICA: Fix required parameters for _NIG and _NIH ACPICA: Dispatcher: add status checks ACPICA: Disassembler: ignore AE_ALREADY_EXISTS status when parsing create operators ACPICA: Move acpi_gbl_next_cmd_num definition to acglobal.h ACPICA: Make acpi_protocol_lengths static * acpi-tables: ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ACPI: APEI: Put the error injection table for error path and module exit ACPI: APEI: Put the boot error record table after parsing ACPI: watchdog: Put the watchdog action table after parsing ACPI: LPIT: Put the low power idle table after using it
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-05-28ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()Qiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-28ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()Qiushi Wu
kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: 3f8055c35836 ("ACPI / hotplug: Introduce user space interface for hotplug profiles") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-27PCI: Rename _DSM constants to align with specKrzysztof Wilczyński
Rename PCI-related _DSM constants to align them with the PCI Firmware Spec, r3.2, sec 4.6. No functional change intended. Link: https://lore.kernel.org/r/20200526213905.2479381-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-27ACPI: GED: use correct trigger type field in _Exx / _Lxx handlingArd Biesheuvel
Commit ea6f3af4c5e63f69 ("ACPI: GED: add support for _Exx / _Lxx handler methods") added a reference to the 'triggering' field of either the normal or the extended ACPI IRQ resource struct, but inadvertently used the wrong pointer in the latter case. Note that both pointers refer to the same union, and the 'triggering' field appears at the same offset in both struct types, so it currently happens to work by accident. But let's fix it nonetheless Fixes: ea6f3af4c5e63f69 ("ACPI: GED: add support for _Exx / _Lxx handler methods") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-26ACPI/IORT: Remove the unused __get_pci_rid()Zenghui Yu
Since commit bc8648d49a95 ("ACPI/IORT: Handle PCI aliases properly for IOMMUs"), __get_pci_rid() has become actually unused and can be removed. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20200509093430.1983-1-yuzenghui@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-25ACPI: EC: PM: s2idle: Extend GPE dispatching debug messageRafael J. Wysocki
Add the "ACPI" string to the "EC GPE dispatched" message as it is ACPI-related. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-25ACPI: PM: s2idle: Print type of wakeup debug messagesRafael J. Wysocki
Since acpi_s2idle_wake() knows the category of wakeup causing the system to resume from suspend-to-idle, make it print a unique message for each of them to help diagnose wakeup issues. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-25ACPI: DPTF: Add battery participant driverSrinivas Pandruvada
This driver adds support for Dynamic Platform and Thermal Framework battery participant device support. These attributes are presented via sysfs interface under the platform device for the battery participant: $ls /sys/bus/platform/devices/INT3532:00/dptf_battery current_discharge_capbility_ma max_platform_power_mw no_load_voltage_mv high_freq_impedance_mohm max_steady_state_power_mw Refer to the documentation at Documentation/ABI/testing/sysfs-platform-dptf for details. Here the implementation reuses existing dptf-power.c as the motivation and processing is same. It also shares one ACPI method. Here this change is using participant type, "PTYP" method to identify and do different processing. By using participant type, create/delete either "dptf_power" or "dptf_battery" attribute group and send notifications. The particpant type for for the battery participant is 0x0C. ACPI methods description: PMAX (Intel(R) Dynamic Tuning Platform Max Power Supplied by Battery): This object evaluates to the maximum platform power that can be supported by the battery in milli watts. PBSS (Intel(R) Dynamic Tuning Power Battery Steady State): This object returns the max sustained power for battery in milli watts. RBHF (Intel(R) Dynamic Tuning High Frequency Impedance): This object returns high frequency impedance value that can be obtained from battery fuel gauge. VBNL (Intel(R) Dynamic Tuning No-Load Voltage) This object returns battery instantaneous no-load voltage that can be obtained from battery fuel gauge in milli volts CMPP (Intel(R) Dynamic Tuning Current Discharge Capability) This object returns battery discharge current capability obtained from battery fuel gauge milli amps. Notifications: 0x80: PMAX change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the PMAX has changed by 250mw. 0x83: PBSS change. Used to notify Intel(R) Dynamic Tuning Battery participant driver when the power source has changed. 0x85: RBHF change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the RBHF has changed over a threshold by 5mOhm. 0x86: Battery Capability change. Used to notify Intel(R)Dynamic Tuning Battery participant driver when the battery capability has changed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-25ACPI: DPTF: Additional sysfs attributes for power participant driverSrinivas Pandruvada
Add two additional attributes to the existing power participant driver: rest_of_platform_power_mw: (RO) Shows the rest of worst case platform power in mW outside of S0C. This will help in power distribution to SoC and rest of the system. For example on a test system, this value is 2.5W with a 15W TDP SoC. Based on the adapter rating (adapter_rating_mw), user space software can decide on proper power allocation to SoC to improve short term performance via powercap/RAPL interface. prochot_confirm: (WO) Confirm EC about a prochot notification. Also userspace is notified via sysfs_notify(), whenever power source or rest of the platform power is changed. So user space can use poll() system call on those attributes. The ACPI methods used in this patch are as follows: PROP This object evaluates to the rest of worst case platform power in mW. Bits: 23:0 Worst case rest of platform power in mW. PBOK PBOK is a method designed to provide a mechanism for OSPM to change power setting before EC can de-assert a PROCHOT from a device. The EC may receive several PROCHOTs, so it has a sequence number attached to PSRC (read via existing attribute "platform_power_source"). Once OSPM takes action for a PSRC change notification, it can call PBOK method to confirm with the sequence number. Bits: 3:0 Power Delivery State Change Sequence number 30 Reserved 31 0 – Not OK to de-assert PROCHOT 1 – OK to de-assert PROCHOT PSRC (Platform Power Source): Not new in this patch but for documentation for new bits This object evaluates to an integer that represents the system power source as well as the power delivery state change sequence number. Bits: 3:0 The current power source as an integer for AC, DC, USB, Wireless. 0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging 7:4 Power Delivery State Change Sequence Number. Default value is 0 Notifications: 0x81: (Power State Change) Used to notify when the power source has changed. 0x84: (PROP change) Used to notify when the platform rest of power has changed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, minor ABI documentation edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-25ACPI: video: Use native backlight on Acer TravelMate 5735ZPaul Menzel
Currently, changing the brightness of the internal display of the Acer TravelMate 5735Z does not work. Pressing the function keys or changing the slider, GNOME Shell 3.36.2 displays the OSD (five steps), but the brightness does not change. The Acer TravelMate 5735Z shipped with Windows 7 and as such does not trigger our "win8 ready" heuristic for preferring the native backlight interface. Still ACPI backlight control doesn't work on this model, where as the native (intel_video) backlight interface does work by adding `acpi_backlight=native` or `acpi_backlight=none` to Linux’ command line. So, add a quirk to force using native backlight control on this model. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207835 Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-20ACPI/IORT: Fix PMCG node single ID mapping handlingTuan Phan
An IORT PMCG node can have no ID mapping if its overflow interrupt is wire based therefore the code that parses the PMCG node can not assume the node will always have a single mapping present at index 0. Fix iort_get_id_mapping_index() by checking for an overflow interrupt and mapping count. Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG") Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com> Reviewed-by: Hanjun Guo <guoahanjun@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/1589994787-28637-1-git-send-email-tuanphan@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-19ACPI: APEI: Kick the memory_failure() queue for synchronous errorsJames Morse
memory_failure() offlines or repairs pages of memory that have been discovered to be corrupt. These may be detected by an external component, (e.g. the memory controller), and notified via an IRQ. In this case the work is queued as not all of memory_failure()s work can happen in IRQ context. If the error was detected as a result of user-space accessing a corrupt memory location the CPU may take an abort instead. On arm64 this is a 'synchronous external abort', and on a firmware first system it is replayed using NOTIFY_SEA. This notification has NMI like properties, (it can interrupt IRQ-masked code), so the memory_failure() work is queued. If we return to user-space before the queued memory_failure() work is processed, we will take the fault again. This loop may cause platform firmware to exceed some threshold and reboot when Linux could have recovered from this error. For NMIlike notifications keep track of whether memory_failure() work was queued, and make task_work pending to flush out the queue. To save memory allocations, the task_work is allocated as part of the ghes_estatus_node, and free()ing it back to the pool is deferred. Signed-off-by: James Morse <james.morse@arm.com> Tested-by: Tyler Baicar <baicar@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-18ACPI: IORT: Add comments for not calling acpi_put_table()Hanjun Guo
The iort_table will be used at runtime after acpi_iort_init(), so add some comments to clarify this to make it less confusing. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1588910753-18543-2-git-send-email-guohanjun@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18ACPI: GTDT: Put GTDT table after parsingHanjun Guo
The mapped GTDT table needs to be released after the driver init. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1588910753-18543-1-git-send-email-guohanjun@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactiveRafael J. Wysocki
Flushing the EC work while suspended to idle when the EC GPE status is not set causes some EC wakeup events (notably power button and lid ones) to be missed after a series of spurious wakeups on the Dell XPS13 9360 in my office. If that happens, the machine cannot be woken up from suspend-to-idle by the power button or lid status change and it needs to be woken up in some other way (eg. by a key press). Flushing the EC work only after successful dispatching the EC GPE, which means that its status has been set, avoids the issue, so change the code in question accordingly. Fixes: 7b301750f7f8 ("ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()") Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Chris Chiu <chiu@endlessm.com>
2020-05-18ACPI / PMIC: Add i2c address for thermal controlMauro Carvalho Chehab
On Asus T101HA, we keep receiving those error messages: i915 0000:00:02.0: [drm] *ERROR* mipi_exec_pmic failed, error: -95 intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x5e reg-addr 0x4b value 0x59 mask 0xff Because the opregion is missing the I2C address. Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-15ACPI: GED: add support for _Exx / _Lxx handler methodsArd Biesheuvel
Per the ACPI spec, interrupts in the range [0, 255] may be handled in AML using individual methods whose naming is based on the format _Exx or _Lxx, where xx is the hex representation of the interrupt index. Add support for this missing feature to our ACPI GED driver. Cc: v4.9+ <stable@vger.kernel.org> # v4.9+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-14ACPI: Delete unused proc filename macrosPascal Terjan
Those were used to create files in /proc/acpi long ago and were missed when that code was deleted. Signed-off-by: Pascal Terjan <pterjan@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-11ACPI: IORT: Add extra message "applying workaround" for off-by-1 issueHanjun Guo
As we already applied a workaround for the off-by-1 issue, it's good to add extra message "applying workaround" to make people less uneasy to see FW_BUG message in the boot log. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/1588910198-8348-1-git-send-email-guohanjun@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-11ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()Rafael J. Wysocki
If the EC GPE status is not set after checking all of the other GPEs, acpi_s2idle_wake() returns 'false', to indicate that the SCI event that has just triggered is not a system wakeup one, but it does that without canceling the pending wakeup and re-arming the SCI for system wakeup which is a mistake, because it may cause s2idle_loop() to busy spin until the next valid wakeup event. [If that happens, the first spurious wakeup is still pending after acpi_s2idle_wake() has returned, so s2idle_enter() does nothing, acpi_s2idle_wake() is called again and it sees that the SCI has triggered, but no GPEs are active, so 'false' is returned again, and so on.] Fix that by moving all of the GPE checking logic from acpi_s2idle_wake() to acpi_ec_dispatch_gpe() and making the latter return 'true' only if a non-EC GPE has triggered and 'false' otherwise, which will cause acpi_s2idle_wake() to cancel the pending SCI wakeup and re-arm the SCI for system wakeup regardless of the EC GPE status. This also addresses a lockup observed on an Elitegroup EF20EA laptop after attempting to wake it up from suspend-to-idle by a key press. Fixes: d5406284ff80 ("ACPI: PM: s2idle: Refine active GPEs check") Link: https://bugzilla.kernel.org/show_bug.cgi?id=207603 Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Link: https://lore.kernel.org/linux-acpi/CAB4CAwdqo7=MvyG_PE+PGVfeA17AHF5i5JucgaKqqMX6mjArbQ@mail.gmail.com/ Reported-by: Chris Chiu <chiu@endlessm.com> Tested-by: Chris Chiu <chiu@endlessm.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>