| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for an issue that could causes users to inadvertantly reserve
too much capacity when debugging the KMSAN and persistent memory
namespace, a lockdep fix, and a kernel-doc build warning:
- Resolve the conflict between KMSAN and NVDIMM with respect to
reserving pmem namespace / volume capacity for larger sizeof(struct
page)
- Fix a lockdep warning in the the NFIT code
- Fix a kernel-doc build warning"
* tag 'libnvdimm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Support sizeof(struct page) > MAX_STRUCT_PAGE_SIZE
ACPI: NFIT: fix a potential deadlock during NFIT teardown
dax: super.c: fix kernel-doc bad line warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Start checking for -mindirect-branch-cs-prefix clang support too now
that LLVM 16 will support it
- Fix a NULL ptr deref when suspending with Xen PV
- Have a SEV-SNP guest check explicitly for features enabled by the
hypervisor and fail gracefully if some are unsupported by the guest
instead of failing in a non-obvious and hard-to-debug way
- Fix a MSI descriptor leakage under Xen
- Mark Xen's MSI domain as supporting MSI-X
- Prevent legacy PIC interrupts from being resent in software by
marking them level triggered, as they should be, which lead to a NULL
ptr deref
* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
acpi: Fix suspend with Xen PV
x86/sev: Add SEV-SNP guest feature negotiation support
x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"
* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native DMI quirk for Asus U46E
ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr
|
|
Lockdep reports that acpi_nfit_shutdown() may deadlock against an
opportune acpi_nfit_scrub(). acpi_nfit_scrub () is run from inside a
'work' and therefore has already acquired workqueue-internal locks. It
also acquiires acpi_desc->init_mutex. acpi_nfit_shutdown() first
acquires init_mutex, and was subsequently attempting to cancel any
pending workqueue items. This reversed locking order causes a potential
deadlock:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc3 #116 Tainted: G O N
------------------------------------------------------
libndctl/1958 is trying to acquire lock:
ffff888129b461c0 ((work_completion)(&(&acpi_desc->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x43/0x450
but task is already holding lock:
ffff888129b460e8 (&acpi_desc->init_mutex){+.+.}-{3:3}, at: acpi_nfit_shutdown+0x87/0xd0 [nfit]
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
*** DEADLOCK ***
Since the workqueue manipulation is protected by its own internal locking,
the cancellation of pending work doesn't need to be done under
acpi_desc->init_mutex. Move cancel_delayed_work_sync() outside the
init_mutex to fix the deadlock. Any work that starts after
acpi_nfit_shutdown() drops the lock will see ARS_CANCEL, and the
cancel_delayed_work_sync() will safely flush it out.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230112-acpi_nfit_lockdep-v1-1-660be4dd10be@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.
The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.
Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com
|
|
The Asus U46E backlight tables have a set of interesting problems:
1. Its ACPI tables do make _OSI ("Windows 2012") checks, so
acpi_osi_is_win8() should return true.
But the tables have 2 sets of _OSI calls, one from the usual global
_INI method setting a global OSYS variable and a second set of _OSI
calls from a MSOS method and the MSOS method is the only one calling
_OSI ("Windows 2012").
The MSOS method only gets called in the following cases:
1. From some Asus specific WMI methods
2. From _DOD, which only runs after acpi_video_get_backlight_type()
has already been called by the i915 driver
3. From other ACPI video bus methods which never run (see below)
4. From some EC query callbacks
So when i915 calls acpi_video_get_backlight_type() MSOS has never run
and acpi_osi_is_win8() returns false, so acpi_video_get_backlight_type()
returns acpi_video as the desired backlight type, which causes
the intel_backlight device to not register.
2. _DOD effectively does this:
Return (Package (0x01)
{
0x0400
})
causing acpi_video_device_in_dod() to return false, which causes
the acpi_video backlight device to not register.
Leaving the user with no backlight device at all. Note that before 6.1.y
the i915 driver would register the intel_backlight device unconditionally
and since that then was the only backlight device userspace would use that.
Add a backlight=native DMI quirk for this special laptop to restore
the old (and working) behavior of the intel_backlight device registering.
Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The HP EliteBook 8460p predates Windows 8, so it defaults to using
acpi_video# for backlight control.
Starting with the 6.1.y kernels the native radeon_bl0 backlight is hidden
in this case instead of relying on userspace preferring acpi_video# over
native backlight devices.
It turns out that for the acpi_video# interface to work on
the HP EliteBook 8460p, the brightness needs to be set at least once
through the native interface, which now no longer is done breaking
backlight control.
The native interface however always works without problems, so add
a quirk to use native backlight on the EliteBook 8460p to fix this.
Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2161428
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The HP Pavilion g6-1d80nr predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
* acpi-prm:
ACPI: PRM: Check whether EFI runtime is available
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
|
|
Commit f1e525009493 ("x86/boot: Skip realmode init code when running as
Xen PV guest") missed one code path accessing real_mode_header, leading
to dereferencing NULL when suspending the system under Xen:
[ 348.284004] PM: suspend entry (deep)
[ 348.289532] Filesystems sync: 0.005 seconds
[ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 348.292457] OOM killer disabled.
[ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done.
[ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug)
[ 348.749228] PM: suspend devices took 0.352 seconds
[ 348.769713] ACPI: EC: interrupt blocked
[ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c
[ 348.816080] #PF: supervisor read access in kernel mode
[ 348.816081] #PF: error_code(0x0000) - not-present page
[ 348.816083] PGD 0 P4D 0
[ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1
[ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022
[ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20
Fix that by adding an optional acpi callback allowing to skip setting
the wakeup address, as in the Xen PV case this will be handled by the
hypervisor anyway.
Fixes: f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20230117155724.22940-1-jgross%40suse.com
|
|
The ACPI PRM address space handler calls efi_call_virt_pointer() to
execute PRM firmware code, but doing so is only permitted when the EFI
runtime environment is available. Otherwise, such calls are guaranteed
to result in a crash, and must therefore be avoided.
Given that the EFI runtime services may become unavailable after a crash
occurring in the firmware, we need to check this each time the PRM
address space handler is invoked. If the EFI runtime services were not
available at registration time to being with, don't install the address
space handler at all.
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Acer Aspire 4810T predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge an ACPI resource management quirk and an ACPI backlight driver fix
for 6.2-rc4:
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan).
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
* acpi-video:
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
|
|
The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.
Specifically under the PCI root bridge there are these 2 ACPI Device()s :
Scope (_SB.PCI0)
{
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
...
Device (VID)
{
Name (_ADR, 0x00020000) // _ADR: Address
...
Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching
{
VDP8 = Arg0
VDP1 (One, VDP8)
}
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
...
}
...
}
}
The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.
This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.
However since commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device
and that is set on the wrong acpi_device because of the wrong
acpi_find_child_device() return. This breaks the ACPI video code,
leading to non working backlight control in some cases.
Add a type.backlight flag, mark ACPI video bus devices with this and make
find_child_checks() return a higher score for children with this flag set,
so that it picks the right companion-device.
Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cmdline
The patches adding NVidia-WMI-EC and Apple GMUX backlight detection
support to acpi_video_get_backlight_type(), forgot to update
acpi_video_parse_cmdline() to allow manually selecting these from
the commandline.
Add support for these to acpi_video_parse_cmdline().
Fixes: fe7aebb40d42 ("ACPI: video: Add Nvidia WMI EC brightness control detection (v3)")
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the Asus Expertbook B2502CBA and various Asus Vivobook laptops,
the Asus Expertbook B2402CBA has an ACPI DSDT table that describes IRQ 1
as ActiveLow while the kernel overrides it to Edge_High. This prevents the
keyboard from working. To fix this issue, add this laptop to the
skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864
Tested-by: zelenat <zelenat@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf30 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Reported-and-tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes: b5f9223a105d ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
added an override for Lenovo IdeaPad 5 16ALC7. The 14ALC7 variant also
suffers from a broken touchscreen and trackpad.
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216804
Signed-off-by: Adrian Freund <adrian@freund.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding
for the keyboard to work. Adding an entry for this laptop to the
override_table makes the internal keyboard functional again.
Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.
This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
Merge additional ACPI EC driver fixes for 6.2-rc1:
- Fix EC address space handler unregistration (Hans de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
* acpi-ec:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
|
|
Merge additional ACPICA changes for 6.2-rc1:
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
* acpica:
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop the forced built-in only configuration by disentangling it from
GHES (Jia He)
- The usual small cleanups and improvements all over EDAC land
* tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
EDAC/i5000: Mark as BROKEN
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
|
|
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI
cleanups and PNP updates for 6.2-rc1:
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
* acpi-fan:
ACPI: fan: Convert to use sysfs_emit_at() API
ACPI: fan: Bail out if extract package failed
* acpi-pcc:
mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure
ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available
* acpi-misc:
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: irq: Fix some kernel-doc issues
* pnp:
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
PNP: fix name memory leak in pnp_alloc_dev()
|
|
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver
fix and ACPI PFRU/T driver fixes for 6.2-rc1:
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
* acpi-apei:
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: APEI: Remove a useless include
ACPI: APEI: Silence missing prototype warnings
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
ACPI: APEI: Drop unsetting driver data on remove
* acpi-x86:
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
* acpi-battery:
ACPI: battery: Call power_supply_changed() when adding hooks
* acpi-pfrut:
ACPI: pfr_update: use ACPI_FREE() to free acpi_object
ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object
|
|
Make ACPI power management changes, ACPI processor driver updates, ACPI
EC driver quirk and ACPI backlight driver updates for 6.2-rc1:
- Print full name paths of ACPI power resources objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
* acpi-pm:
ACPI: PM: Silence missing prototype warning
ACPI: PM: Print full name path while adding power resource
* acpi-processor:
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: processor: throttling: remove variable count
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
* acpi-ec:
ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur
* acpi-video:
ACPI: video: Prefer native over vendor
ACPI: video: Simplify __acpi_video_get_backlight_type()
ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E
ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35
ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native
ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none
ACPI: video: Add a few bugtracker links to DMI quirks
|
|
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
|
|
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
|
|
ACPI-2.0 says that the EC OpRegion handler must be available immediately
(like the standard default OpRegion handlers):
Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ...
2. OSPM must make Embedded Controller operation regions, accessed via
the Embedded Controllers described in ECDT, available before executing
any control method. These operation regions may become inaccessible
after OSPM runs _REG(EmbeddedControl, 0)."
So acpi_bus_init() calls acpi_ec_ecdt_probe(), which calls
acpi_install_address_space_handler() to install the EC's OpRegion
handler, early on.
This not only installs the OpRegion handler, but also calls the EC's
_REG method. The _REG method call is a problem because it may rely on
initialization done by the _INI methods of one of the PCI / _SB root devs,
see for example: https://bugzilla.kernel.org/show_bug.cgi?id=214899 .
Generally speaking _REG methods are executed when the ACPI-device they
are part of has a driver bound to it. Where as _INI methods must be
executed at table load time (according to the spec). The problem here
is that the early acpi_install_address_space_handler() call causes
the _REG handler to run too early.
To allow fixing this the ACPICA code now allows to split the OpRegion
handler installation and the executing of _REG into 2 separate steps.
This commit uses this ACPICA functionality to fix the EC probe ordering
by delaying the executing of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() for it gets called.
This moves the calling of _REG for the EC on devices with an ECDT to
the same point in time where it is called on devices without an ECDT table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214899
Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When an ECDT table is present the EC address space handler gets registered
on the root node. So to unregister it properly the unregister call also
must be done on the root node.
Store the ACPI handle used for the acpi_install_address_space_handler()
call and use te same handle for the acpi_remove_address_space_handler()
call.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
steps
ACPI-2.0 says that the EC op_region handler must be available immediately
(like the standard default op_region handlers):
Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ...
2. OSPM must make Embedded Controller operation regions, accessed via
the Embedded Controllers described in ECDT, available before executing
any control method. These operation regions may become inaccessible
after OSPM runs _REG(EmbeddedControl, 0)."
So the OS must probe the ECDT described EC and install the OpRegion handler
before calling acpi_enable_subsystem() and acpi_initialize_objects().
This is a problem because calling acpi_install_address_space_handler()
does not just install the op_region handler, it also runs the EC's _REG
method. This _REG method may rely on initialization done by the _INI
methods of one of the PCI / _SB root devices.
For the other early/default op_region handlers the op_region handler
install and the _REG execution is split into 2 separate steps:
1. acpi_ev_install_region_handlers(), called early from acpi_load_tables()
2. acpi_ev_initialize_op_regions(), called from acpi_initialize_objects()
To fix the EC op_region issue, add 2 bew functions:
1. acpi_install_address_space_handler_no_reg()
2. acpi_execute_reg_methods()
to allow doing things in 2 steps for other op_region handlers,
like the EC handler, too.
Note that the comment describing acpi_ev_install_region_handlers() even has
an alinea describing this problem. Using the new methods allows users
to avoid this problem.
Link: https://github.com/acpica/acpica/pull/786
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214899
Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In our tests we get UBSAN warning coming from ACPI parser. This is
caused by trying to resolve operands when there is none.
[ 0.000000] Linux version 5.15.0-rc3chromeavsrel1.0.184+ (root@...) (gcc (Ubuntu 10.3.0-1ubuntu1~20.04) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Sat Oct 16 00:08:27 UTC 2021
...
[ 14.719508] ================================================================================
[ 14.719551] UBSAN: array-index-out-of-bounds in /.../linux/drivers/acpi/acpica/dswexec.c:401:12
[ 14.719594] index -1 is out of range for type 'acpi_operand_object *[9]'
[ 14.719621] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc3chromeavsrel1.0.184+ #1
[ 14.719657] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0214.B50.2009111159 09/11/2020
[ 14.719694] Call Trace:
[ 14.719712] dump_stack_lvl+0x38/0x49
[ 14.719749] dump_stack+0x10/0x12
[ 14.719775] ubsan_epilogue+0x9/0x45
[ 14.719801] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 14.719835] acpi_ds_exec_end_op+0x1d7/0x6b5
[ 14.719870] acpi_ps_parse_loop+0x942/0xb34
...
Problem happens because WalkState->NumOperands is 0 and it is used when
trying to access into operands table. Actual code is:
WalkState->Operands [WalkState->NumOperands -1]
which causes out of bound access. Improve the check before above access
to check if ACPI opcode should have any arguments (operands) at all.
Link: https://github.com/acpica/acpica/pull/745
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as
factory OS. The Android x86 kernel fork ignores I2C devices described in
the DSDT, except for the PMIC and Audio codecs.
As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to
the acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
