summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2018-07-02ata: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ata: Fix ZBC_OUT all bit handlingDamien Le Moal
If the ALL bit is set in the ZBC_OUT command, the command zone ID field (block) should be ignored. Reported-by: David Butterfield <david.butterfield@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ata: Fix ZBC_OUT command block checkDamien Le Moal
The block (LBA) specified must not exceed the last addressable LBA, which is dev->nr_sectors - 1. So fix the correct check is "if (block >= dev->n_sectors)" and not "if (block > dev->n_sectords)". Additionally, the asc/ascq to return for an LBA that is not a zone start LBA should be ILLEGAL REQUEST, regardless if the bad LBA is out of range. Reported-by: David Butterfield <david.butterfield@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ahci: Add Intel Ice Lake LP PCI IDMika Westerberg
This should also be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2018-07-02ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOSHans de Goede
There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02sata_nv: remove redundant pointers sdev0 and sdev1Colin Ian King
Pointers sdev0 and sdev1 are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'sdev0' set but not used [-Wunused-but-set-variable] warning: variable 'sdev1' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-19sata_fsl: remove dead code in tag retrievalJens Axboe
We can never pass in the internal tag to this helper, it'll always be the hardware tag. So there's no need to check and do an internal translation of that tag. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-19sata_fsl: convert to command iteratorJens Axboe
We need to iterate all commands, including the internal one, for ATAPI error handling. Fixes: 28361c403683 ("libata: add extra internal command") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-19libata: convert eh to command iteratorsJens Axboe
Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-18ata: ahci_mvebu: ahci_mvebu_stop_engine() can be staticWei Yongjun
Fixes the following sparse warning: drivers/ata/ahci_mvebu.c:85:5: warning: symbol 'ahci_mvebu_stop_engine' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-18libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()John Garry
Currently smatch warns of possible Spectre-V1 issue in ahci_led_store(): drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap) Userspace controls @pmp from following callchain: em_message->store() ->ata_scsi_em_message_store() -->ap->ops->em_store() --->ahci_led_store() After the mask+shift @pmp is effectively an 8b value, which is used to index into an array of length 8, so sanitize the array index. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-06-05Merge branch 'for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - libata has always been limiting the maximum queue depth to 31, with one entry set aside mostly for historical reasons. This didn't use to make much difference but Jens found out that modern hard drives can actually perform measurably better with the extra one queue depth. Jens updated libata core so that it can make use of full 32 queue depth - Damien updated command retry logic in error handling so that it doesn't unnecessarily retry when upper layer (SCSI) is gonna handle them - A couple misc changes * 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: use the right type for tag bitshift ahci: enable full queue depth of 32 libata: don't clamp queue depth to ATA_MAX_QUEUE - 1 libata: add extra internal command sata_nv: set host can_queue count appropriately libata: remove assumption that ATA_MAX_QUEUE - 1 is the max libata: use ata_tag_internal() consistently libata: bump ->qc_active to a 64-bit type libata: convert core and drivers to ->hw_tag usage libata: introduce notion of separate hardware tags libata: Fix command retry decision libata: Honor RQF_QUIET flag libata: Make ata_dev_set_mode() less verbose libata: Fix ata_err_string() libata: Fix comment typo in ata_eh_analyze_tf() sata_nv: don't use block layer bounce buffer ata: hpt37x: Convert to use match_string() helper
2018-06-05Merge branch 'for-4.17-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "These two are fixes which missed v4.17. One is to remove an incorrect power management blacklist entry and the other to fix a cdb buffer overrun which has been there for a very long time" * 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk libata: zpodd: small read overflow in eject_tray()
2018-06-04Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - clean up how we pass around gfp_t and blk_mq_req_flags_t (Christoph) - prepare us to defer scheduler attach (Christoph) - clean up drivers handling of bounce buffers (Christoph) - fix timeout handling corner cases (Christoph/Bart/Keith) - bcache fixes (Coly) - prep work for bcachefs and some block layer optimizations (Kent). - convert users of bio_sets to using embedded structs (Kent). - fixes for the BFQ io scheduler (Paolo/Davide/Filippo) - lightnvm fixes and improvements (Matias, with contributions from Hans and Javier) - adding discard throttling to blk-wbt (me) - sbitmap blk-mq-tag handling (me/Omar/Ming). - remove the sparc jsflash block driver, acked by DaveM. - Kyber scheduler improvement from Jianchao, making it more friendly wrt merging. - conversion of symbolic proc permissions to octal, from Joe Perches. Previously the block parts were a mix of both. - nbd fixes (Josef and Kevin Vigor) - unify how we handle the various kinds of timestamps that the block core and utility code uses (Omar) - three NVMe pull requests from Keith and Christoph, bringing AEN to feature completeness, file backed namespaces, cq/sq lock split, and various fixes - various little fixes and improvements all over the map * tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits) blk-mq: update nr_requests when switching to 'none' scheduler block: don't use blocking queue entered for recursive bio submits dm-crypt: fix warning in shutdown path lightnvm: pblk: take bitmap alloc. out of critical section lightnvm: pblk: kick writer on new flush points lightnvm: pblk: only try to recover lines with written smeta lightnvm: pblk: remove unnecessary bio_get/put lightnvm: pblk: add possibility to set write buffer size manually lightnvm: fix partial read error path lightnvm: proper error handling for pblk_bio_add_pages lightnvm: pblk: fix smeta write error path lightnvm: pblk: garbage collect lines with failed writes lightnvm: pblk: rework write error recovery path lightnvm: pblk: remove dead function lightnvm: pass flag on graceful teardown to targets lightnvm: pblk: check for chunk size before allocating it lightnvm: pblk: remove unnecessary argument lightnvm: pblk: remove unnecessary indirection lightnvm: pblk: return NVM_ error on failed submission lightnvm: pblk: warn in case of corrupted write buffer ...
2018-05-31libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirkHans de Goede
Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "Richard W.M. Jones" <rjones@redhat.com>
2018-05-29libata: remove ata_scsi_timed_outChristoph Hellwig
As far as I can tell this function can't even be called any more, given that ATA implements its own eh_strategy_handler with ata_scsi_error, which never calls ->eh_timed_out. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29libata: zpodd: small read overflow in eject_tray()Dan Carpenter
We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 213342053db5 ("libata: handle power transition of ODD") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2018-05-24ahci: Add PCI ID for Cannon Lake PCH-LP AHCIMika Westerberg
This one should be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported revices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2018-05-21libata: blacklist Micron 500IT SSD with MU01 firmwareSudip Mukherjee
While whitelisting Micron M500DC drives, the tweaked blacklist entry enabled queued TRIM from M500IT variants also. But these do not support queued TRIM. And while using those SSDs with the latest kernel we have seen errors and even the partition table getting corrupted. Some part from the dmesg: [ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133 [ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.741026] ata1.00: supports DRM functions and may not be fully accessible [ 6.759887] ata1.00: configured for UDMA/133 [ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5 and then for the error: [ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen [ 120.860338] ata1.00: irq_stat 0x40000008 [ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED [ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout) [ 120.860353] ata1.00: status: { DRDY } [ 120.860543] ata1: hard resetting link [ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 121.166376] ata1.00: supports DRM functions and may not be fully accessible [ 121.186238] ata1.00: supports DRM functions and may not be fully accessible [ 121.204445] ata1.00: configured for UDMA/133 [ 121.204454] ata1.00: device reported invalid CHS sector 0 [ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current] [ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4 [ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00 [ 121.204559] print_req_error: I/O error, dev sda, sector 272512 After few reboots with these errors, and the SSD is corrupted. After blacklisting it, the errors are not seen and the SSD does not get corrupted any more. Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC") Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-14libata: Apply NOLPM quirk for SAMSUNG PM830 CXM13D1Q.François Cami
Without this patch the drive errors out regularly: [ 1.090154] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 256GB, CXM13D1Q, max UDMA/133 (...) [ 345.154996] ata1.00: exception Emask 0x40 SAct 0x0 SErr 0xc0800 action 0x6 [ 345.155006] ata1.00: irq_stat 0x40000001 [ 345.155013] ata1: SError: { HostInt CommWake 10B8B } [ 345.155018] ata1.00: failed command: SET FEATURES [ 345.155032] ata1.00: cmd ef/05:e1:00:00:00/00:00:00:00:00/40 tag 7 res 51/04:e1:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error) [ 345.155038] ata1.00: status: { DRDY ERR } [ 345.155042] ata1.00: error: { ABRT } [ 345.155051] ata1: hard resetting link [ 345.465661] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 345.466955] ata1.00: configured for UDMA/133 [ 345.467085] ata1: EH complete Signed-off-by: François Cami <fcami@fedoraproject.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-14sata_fsl: use the right type for tag bitshiftJens Axboe
Since ATA_TAG_INTERNAL is now > 31 bits, we need to extend the type to ULL to cover 32/64-bit cases. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11ahci: enable full queue depth of 32Jens Axboe
This changes the AHCI queue depth from 31 to 32, as libata now fully supports it. Now regular IO requests can utilize the full tag space of SATA, not just 31. For IOPS constrained workloads, this can result in a ~3% bump in performance. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: don't clamp queue depth to ATA_MAX_QUEUE - 1Jens Axboe
Use what the driver provides, which will still be ATA_MAX_QUEUE - 1 at most anyway. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: add extra internal commandJens Axboe
Bump the internal tag to 32, instead of stealing the last tag in our regular command space. This works just fine, since we don't actually need a separate hardware tag for this. Internal commands cannot coexist with NCQ commands. As a bonus, we get rid of the special casing of what tag to use for the internal command. This is in preparation for utilizing all 32 commands for normal IO. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11sata_nv: set host can_queue count appropriatelyJens Axboe
libata limits the max limit for drivers to 31 anyway. We'll soon allow drivers to actually go to QD=32, but that might require some driver modifications. Before we do that, ensure that sata_nv limits the depth to 31. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: remove assumption that ATA_MAX_QUEUE - 1 is the maxJens Axboe
In a few spots we iterate to ATA_MAX_QUEUE -1, including internal knowledge that the last tag is the internal tag. Remove this assumption. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: use ata_tag_internal() consistentlyJens Axboe
Some check for the value directly, use the provided helper instead. Also make it return a bool, since that's what it does. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: bump ->qc_active to a 64-bit typeJens Axboe
This is in preparation for allowing full usage of the tag space, which means that our reserved error handling command will be using an internal tag value of 32. This doesn't fit in a u32, so move to a u64. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: convert core and drivers to ->hw_tag usageJens Axboe
Anything that goes to the hardware should use ->hw_tag, anything related to internal lookup should be using ->tag. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-11libata: introduce notion of separate hardware tagsJens Axboe
Rigth now these are the same, but drivers should be using ->hw_tag for their command setup and issue. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10libata: Fix command retry decisionDamien Le Moal
For failed commands with valid sense data (e.g. NCQ commands), scsi_check_sense() is used in ata_analyze_tf() to determine if the command can be retried. In such case, rely on this decision and ignore the command error mask based decision done in ata_worth_retry(). This fixes useless retries of commands such as unaligned writes on zoned disks (TYPE_ZAC). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10libata: Honor RQF_QUIET flagDamien Le Moal
Currently, libata ignores requests RQF_QUIET flag and print error messages for failed commands, regardless if this flag is set in the command request. Fix this by introducing the ata_eh_quiet() function and using this function in ata_eh_link_autopsy() to determine if the EH context should be quiet. This works by counting the number of failed commands and the number of commands with the quiet flag set. If both numbers are equal, the the EH context can be set to quiet and all error messages suppressed. Otherwise, only the error messages for the failed commands are suppressed and the link Emask and irq_stat messages printed. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10libata: Make ata_dev_set_mode() less verboseDamien Le Moal
For a successful setting of the device transfer speed mode in ata_dev_set_mode(), do not print the message "ataX.XX: configured for xxx" if the EH context has the quiet flag set, unless the device port is being reset. This preserves the output of the message during device scan but removes it in the case of a simple device revalidation such as trigerred by enabling the NCQ I/O priority feature of the device e.g. echo 1 > /sys/block/sdxx/device/ncq_iprio_enable Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10libata: Fix ata_err_string()Damien Le Moal
Add proper error string output for ATA_ERR_NCQ and ATA_ERR_NODEV_HINT instead of returning "unknown error". Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10libata: Fix comment typo in ata_eh_analyze_tf()Damien Le Moal
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10sata_nv: don't use block layer bounce bufferChristoph Hellwig
sata_nv sets the block bounce limit to the reduce dma mask for ATAPI devices, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-08libata: Blacklist some Sandisk SSDs for NCQTejun Heo
Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up regularly under sustained moderate load with NCQ enabled. Blacklist for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org
2018-05-07ata: hpt37x: Convert to use match_string() helperAndy Shevchenko
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-07driver core: add __printf verification to __ata_ehi_pushv_descMathieu Malaterre
__printf is useful to verify format and arguments. Remove the following warning (with W=1): drivers/ata/libata-eh.c:183:10: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-01ata: fix spelling mistake: "directon" -> "direction"Colin Ian King
Trivial fix to spelling mistake in sil24_cerr_info message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDsHans de Goede
Richard Jones has reported that using med_power_with_dipm on a T450s with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is causing the machine to hang. Switching the LPM to max_performance fixes this, so it seems that this Sandisk SSD does not handle LPM well. Note in the past there have been bug-reports about the following Sandisk models not working with min_power, so we may need to extend the quirk list in the future: name - firmware Sandisk SD6SB2M512G1022I - X210400 Sandisk SD6PP4M-256G-1006 - A200906 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSDHans de Goede
Kevin Shanahan reports the following repeating errors when using LPM, causing long delays accessing the disk: Apr 23 10:21:43 link kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen Apr 23 10:21:43 link kernel: ata1: SError: { PHYRdyChg CommWake } Apr 23 10:21:43 link kernel: ata1.00: failed command: WRITE DMA Apr 23 10:21:43 link kernel: ata1.00: cmd ca/00:08:60:5d:cd/00:00:00:00:00/e1 tag 9 dma 4096 out res 50/01:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 23 10:21:43 link kernel: ata1.00: status: { DRDY } Apr 23 10:21:43 link kernel: ata1.00: error: { AMNF } Apr 23 10:21:43 link kernel: ata1: hard resetting link Apr 23 10:21:43 link kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 23 10:21:43 link kernel: ata1.00: configured for UDMA/133 Apr 23 10:21:43 link kernel: ata1: EH complete These go away when switching from med_power_with_dipm to medium_power. This is somewhat weird as the PM830 datasheet explicitly mentions DIPM being supported and the idle power-consumption is specified with DIPM enabled. There are many OEM customized firmware versions for the PM830, so for now lets assume this is firmware version specific and blacklist LPM based on the firmware version. Cc: Kevin Shanahan <kevin@shanahan.id.au> Reported-by: Kevin Shanahan <kevin@shanahan.id.au> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCIEvan Wang
There is an issue(Errata Ref#226) that the SATA can not be detected via SATA Port-MultiPlayer(PMP) with following error log: ata1.15: PMP product ID mismatch ata1.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.15: Port Multiplier vendor mismatch '0x1b4b'!='0x0' ata1.15: PMP revalidation failed (errno=-19) After debugging, the reason is found that the value Port-x FIS-based Switching Control(PxFBS@0x40) become wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs a mvebu SATA WA to save the port PxFBS register before PxCMD ST write and restore it afterwards. This patch implements the WA in a separate function of ahci_mvebu_stop_engine to override ahci_stop_gngine. Signed-off-by: Evan Wang <xswang@marvell.com> Cc: Ofer Heifetz <oferh@marvell.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26libahci: Allow drivers to override stop_engineEvan Wang
Marvell armada37xx, armada7k and armada8k share the same AHCI sata controller IP, and currently there is an issue (Errata Ref#226)that the SATA can not be detected via SATA Port-MultiPlayer(PMP). After debugging, the reason is found that the value of Port-x FIS-based Switching Control (PxFBS@0x40) became wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs save the port PxFBS register before PxCMD ST write and restore the port PxFBS register afterwards in ahci_stop_engine(). This commit allows drivers to override ahci_stop_engine behavior for use by the Marvell AHCI driver(and potentially other drivers in the future). Signed-off-by: Evan Wang <xswang@marvell.com> Cc: Ofer Heifetz <oferh@marvell.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-18scsi: libsas: add transport class for ATA devicesJason Yan
Now ata devices attached with sas controller do not have transport class, so that we can not see any information of these ata devices in /sys/class/ata_port(or ata_link or ata_device). Add transport class for the ata devices attached with sas controller. The /sys/class directory will show the infomation of the ata devices as follows: localhost:/sys/class # ls ata* ata_device: dev1.0 dev2.0 ata_link: link1 link2 ata_port: ata1 ata2 No functional change of the device scanning and io path. The ata transport class was deleted when destroying the sas devices. Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09Revert "ata: ahci-platform: add reset control support"Kunihiko Hayashi
This reverts commit f0f56716fc3e5d547fd7811eb218a30ed0695605. According to Thierry's view, https://www.spinics.net/lists/linux-ide/msg55357.html some hardware-specific drivers already use their own resets, and the common reset might make a path to occur double controls of resets. For now, revert the commit that adds reset control support to ahci-platform, and hold until the solution is confirmed not be affect all hardware-specific drivers. Fixes: f0f56716fc3e ("ata: ahci-platform: add reset control support") Reported-by: Thierry Reding <thierry.reding@gmail.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-03Merge branch 'for-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. The biggest change is refcnting fix for ata_host - the bug is recent and can only be triggered on controller hotplug, so very few are hitting it. There also are a number of trivial license / error message changes and some hardware specific changes" * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits) ahci: imx: add the imx8qm ahci sata support libata: ensure host is free'd on error exit paths ata: ahci-platform: add reset control support ahci: imx: fix the build warning ata: add Amiga Gayle PATA controller driver ahci: imx: add the imx6qp ahci sata support ata: change Tegra124 to Tegra ata: ahci_tegra: Add AHCI support for Tegra210 ata: ahci_tegra: disable DIPM ata: ahci_tegra: disable devslp for Tegra124 ata: ahci_tegra: initialize regulators from soc struct ata: ahci_tegra: Update initialization sequence dt-bindings: Tegra210: add binding documentation libata: add refcounting to ata_host pata_bk3710: clarify license version and use SPDX header pata_falcon: clarify license version and use SPDX header pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command() pata_macio: Delete an error message for a failed memory allocation in two functions pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe() sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start() ...