summaryrefslogtreecommitdiff
path: root/drivers/atm
AgeCommit message (Collapse)Author
2022-08-08atm: idt77252: fix use-after-free bugs caused by tst_timerDuoming Zhou
There are use-after-free bugs caused by tst_timer. The root cause is that there are no functions to stop tst_timer in idt77252_exit(). One of the possible race conditions is shown below: (thread 1) | (thread 2) | idt77252_init_one | init_card | fill_tst | mod_timer(&card->tst_timer, ...) idt77252_exit | (wait a time) | tst_timer | | ... kfree(card) // FREE | | card->soft_tst[e] // USE The idt77252_dev is deallocated in idt77252_exit() and used in timer handler. This patch adds del_timer_sync() in idt77252_exit() in order that the timer handler could be stopped before the idt77252_dev is deallocated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11atm: he: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/7f795bd6d5b2a00f581175b7069b229c2e5a4192.1657379127.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17atm: iphase: Fix typo in commentXiang wangx
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220616164155.11686-1-wangxiang@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27net: atm: remove support for ZeitNet ZN122x ATM devicesJakub Kicinski
This driver received nothing but automated fixes in the last 15 years. Since it's using virt_to_bus it's unlikely to be used on any modern platform. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: atm: remove support for Madge Horizon ATM devicesJakub Kicinski
This driver received nothing but automated fixes since git era begun. Since it's using virt_to_bus it's unlikely to be used on any modern platform. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: atm: remove support for Fujitsu FireStream ATM devicesJakub Kicinski
This driver received nothing but automated fixes (mostly spelling and compiler warnings) since git era begun. Since it's using virt_to_bus it's unlikely to be used on any modern platform. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-26net: remove comments that mention obsolete __SLOW_DOWN_IOBjorn Helgaas
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do nothing, and the only mentions in networking are in comments. Remove these mentions. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08net: atm: remove the ambassador driverJakub Kicinski
The driver for ATM Ambassador devices spews build warnings on microblaze. The virt_to_bus() calls discard the volatile keyword. The right thing to do would be to migrate this driver to a modern DMA API but it seems unlikely anyone is actually using it. There had been no fixes or functional changes here since the git era begun. In fact it sounds like the FW loading was broken from 2008 'til 2012 - see commit fcdc90b025e6 ("atm: forever loop loading ambassador firmware"). Let's remove this driver, there isn't much changing in the APIs, if users come forward we can apologize and revert. Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15atm: eni: Add check for dma_map_singleJiasheng Jiang
As the potential failure of the dma_map_single(), it should be better to check it and return error if fails. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28atm: firestream: check the return value of ioremap() in fs_init()Jia-Ju Bai
The function ioremap() in fs_init() can fail, so its return value should be checked. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19atm: nicstar: Use kcalloc() to simplify codeChristophe JAILLET
Use kcalloc() instead of kmalloc_array() and a loop to set all the values of the array to NULL. While at it, remove a duplicated assignment to 'scq->num_entries'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-13atm: iphase: remove redundant pointer skbColin Ian King
The pointer skb is redundant, it is assigned a value that is never read and hence can be removed. Cleans up clang scan warning: drivers/atm/iphase.c:205:18: warning: Although the value stored to 'skb' is used in the enclosing expression, the value is never actually read from 'skb' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08atm: horizon: Fix spelling mistakes in TX commentJun Miao
It's "must not", not "musn't", meaning "shall not". Let's fix that. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jun Miao <jun.miao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20atm: idt77252: clean up trigraph warning on ??) stringColin Ian King
The character sequence ??) is a trigraph and causes the following clang warning: drivers/atm/idt77252.c:3544:35: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30Merge tag 'net-next-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-21atm: nicstar: register the interrupt handler in the right placeZheyu Ma
Because the error handling is sequential, the application of resources should be carried out in the order of error handling, so the operation of registering the interrupt handler should be put in front, so as not to free the unregistered interrupt handler during error handling. This log reveals it: [ 3.438724] Trying to free already-free IRQ 23 [ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480 [ 3.440039] Modules linked in: [ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.441561] RIP: 0010:free_irq+0xfb/0x480 [ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000 [ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.444994] Call Trace: [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Kernel panic - not syncing: panic_on_warn set ... [ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.444994] Call Trace: [ 3.444994] dump_stack+0xba/0xf5 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] panic+0x155/0x3ed [ 3.444994] ? __warn+0xed/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] __warn+0x103/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] report_bug+0x119/0x1c0 [ 3.444994] handle_bug+0x3b/0x80 [ 3.444994] exc_invalid_op+0x18/0x70 [ 3.444994] asm_exc_invalid_op+0x12/0x20 [ 3.444994] RIP: 0010:free_irq+0xfb/0x480 [ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] ? vprintk_func+0x71/0x110 [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Dumping ftrace buffer: [ 3.444994] (ftrace buffer empty) [ 3.444994] Kernel Offset: disabled [ 3.444994] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21atm: nicstar: use 'dma_free_coherent' instead of 'kfree'Zheyu Ma
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for error handling, but the correct memory free function should be used, otherwise it will cause an error. Since 'card->rsq.org' and 'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they should be freed using 'dma_free_coherent'. Fix this by using 'dma_free_coherent' instead of 'kfree' This log reveals it: [ 3.440294] kernel BUG at mm/slub.c:4206! [ 3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141 [ 3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.442780] RIP: 0010:kfree+0x26a/0x300 [ 3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.443396] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.443396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.443396] Call Trace: [ 3.443396] ns_init_card_error+0x12c/0x220 [ 3.443396] nicstar_init_one+0x10d2/0x1130 [ 3.443396] local_pci_probe+0x4a/0xb0 [ 3.443396] pci_device_probe+0x126/0x1d0 [ 3.443396] ? pci_device_remove+0x100/0x100 [ 3.443396] really_probe+0x27e/0x650 [ 3.443396] driver_probe_device+0x84/0x1d0 [ 3.443396] ? mutex_lock_nested+0x16/0x20 [ 3.443396] device_driver_attach+0x63/0x70 [ 3.443396] __driver_attach+0x117/0x1a0 [ 3.443396] ? device_driver_attach+0x70/0x70 [ 3.443396] bus_for_each_dev+0xb6/0x110 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] driver_attach+0x22/0x30 [ 3.443396] bus_add_driver+0x1e6/0x2a0 [ 3.443396] driver_register+0xa4/0x180 [ 3.443396] __pci_register_driver+0x77/0x80 [ 3.443396] ? uPD98402_module_init+0xd/0xd [ 3.443396] nicstar_init+0x1f/0x75 [ 3.443396] do_one_initcall+0x7a/0x3d0 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.443396] kernel_init_freeable+0x2a7/0x2f9 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] kernel_init+0x13/0x180 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ret_from_fork+0x1f/0x30 [ 3.443396] Modules linked in: [ 3.443396] Dumping ftrace buffer: [ 3.443396] (ftrace buffer empty) [ 3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]--- [ 3.458922] RIP: 0010:kfree+0x26a/0x300 [ 3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.463368] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.463949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.465860] Kernel panic - not syncing: Fatal exception [ 3.466370] Dumping ftrace buffer: [ 3.466616] (ftrace buffer empty) [ 3.466871] Kernel Offset: disabled [ 3.467122] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21atm: Fix typozuoqilin
Change 'contol' to 'control'. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17atm: fore200e: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough pseudo-keyword. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-12atm: nicstar: Fix possible use-after-free in nicstar_cleanup()Zou Wei
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11atm: iphase: fix possible use-after-free in ia_module_exit()Zou Wei
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10atm: Replace custom isprint() with generic analogueAndy Shevchenko
Custom isprint() definition may collide with one form ctype.h. In order to avoid this, replace it with a functional analogue which is isascii() && isprint() in this case. First appearance of the code is in the commit 636b38438001 ("Import 2.3.43"). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-07atm: firestream: Use fallthrough pseudo-keywordWei Ming Chen
Add pseudo-keyword macro fallthrough[1] [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-26Merge tag 'irq-core-2021-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual updates from the irq departement: Core changes: - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be cleaned up which either use a seperate mechanism to prevent auto-enable at request time or have a racy mechanism which disables the interrupt right after request. - Get rid of the last usage of irq_create_identity_mapping() and remove the interface. - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable() are in task context and usually in cleanup, teardown code pathes. tasklet_disable() spinwaits for a tasklet which is currently executed. That's not only a problem for PREEMPT_RT where this can lead to a live lock when the disabling task preempts the softirq thread. It's also problematic in context of virtualization when the vCPU which runs the tasklet is scheduled out and the disabling code has to spin wait until it's scheduled back in. There are a few code pathes which invoke tasklet_disable() from non-sleepable context. For these a new disable variant which still spinwaits is provided which allows to switch tasklet_disable() to a sleep wait mechanism. For the atomic use cases this does not solve the live lock issue on PREEMPT_RT. That is mitigated by blocking on the RT specific softirq lock. - The PREEMPT_RT specific implementation of softirq processing and local_bh_disable/enable(). On RT enabled kernels soft interrupt processing happens always in task context and all interrupt handlers, which are not explicitly marked to be invoked in hard interrupt context are forced into task context as well. This allows to protect against softirq processing with a per CPU lock, which in turn allows to make BH disabled regions preemptible. Most of the softirq handling code is still shared. The RT/non-RT specific differences are addressed with a set of inline functions which provide the context specific functionality. The local_bh_disable() / local_bh_enable() mechanism are obviously seperate. - The usual set of small improvements and cleanups Driver changes: - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers - Extended functionality for MStar, STM32 and SC7280 irq chips - Enhanced robustness for ARM GICv3/4.1 drivers - The usual set of cleanups and improvements all over the place" * tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP irqchip/gic-v3: Do not enable irqs when handling spurious interrups dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller irqchip: Add support for IDT 79rc3243x interrupt controller irqdomain: Drop references to recusive irqdomain setup irqdomain: Get rid of irq_create_strict_mappings() irqchip/jcore-aic: Kill use of irq_create_strict_mappings() ARM: PXA: Kill use of irq_create_strict_mappings() irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection irqchip/tb10x: Use 'fallthrough' to eliminate a warning genirq: Reduce irqdebug cacheline bouncing kernel: Initialize cpumask before parsing irqchip/wpcm450: Drop COMPILE_TEST irqchip/irq-mst: Support polarity configuration irqchip: Add driver for WPCM450 interrupt controller dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic dt-bindings: qcom,pdc: Add compatible for sc7280 irqchip/stm32: Add usart instances exti direct event support irqchip/gic-v3: Fix OF_BAD_ADDR error handling irqchip/sifive-plic: Mark two global variables __ro_after_init ...
2021-04-23net/atm: Fix spelling mistake "requed" -> "requeued"Colin Ian King
There is a spelling mistake in a printk message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14atm: idt77252: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/atm/idt77252.c:1787:1: warning: unused function 'idt77252_fbq_level' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17atm: eni: Use tasklet_disable_in_atomic() in the send() callbackSebastian Andrzej Siewior
The atmdev_ops::send callback which calls tasklet_disable() is invoked with bottom halfs disabled from net_device_ops::ndo_start_xmit(). All other invocations of tasklet_disable() in this driver happen in preemptible context. Change the send() call to use tasklet_disable_in_atomic() which allows tasklet_disable() to be made sleepable once the remaining atomic context usage sites are cleaned up. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210309084242.415583839@linutronix.de
2021-03-15atm: delete include/linux/atm_suni.hAlexey Dobriyan
This file has been effectively empty since 2.3.99-pre3 ! Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: idt77252: fix null-ptr-dereferenceTong Zhang
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference. fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: uPD98402: fix incorrect allocationTong Zhang
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference. I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: lanai: dont run lanai_dev_close if not openTong Zhang
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the pci device is disabled. The caller, lanai_init_one(), then tries to run atm_dev_deregister(). This will subsequently call lanai_dev_close() and use the already released MMIO area. To fix this issue, set the lanai->base to NULL if open fail, and test the flag in lanai_dev_close(). [ 8.324153] lanai: lanai_start() failed, err=19 [ 8.324819] lanai(itf 0): shutting down interface [ 8.325211] BUG: unable to handle page fault for address: ffffc90000180024 [ 8.325781] #PF: supervisor write access in kernel mode [ 8.326215] #PF: error_code(0x0002) - not-present page [ 8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0 [ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI [ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12 [ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.333077] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.334932] Call Trace: [ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm] [ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai] [ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai] [ 8.335831] local_pci_probe+0x6f/0xb0 [ 8.336039] pci_device_probe+0x171/0x240 [ 8.336255] ? pci_device_remove+0xe0/0xe0 [ 8.336475] ? kernfs_create_link+0xb6/0x110 [ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 8.336983] really_probe+0x161/0x420 [ 8.337181] driver_probe_device+0x6d/0xd0 [ 8.337401] device_driver_attach+0x82/0x90 [ 8.337626] ? device_driver_attach+0x90/0x90 [ 8.337859] __driver_attach+0x60/0x100 [ 8.338065] ? device_driver_attach+0x90/0x90 [ 8.338298] bus_for_each_dev+0xe1/0x140 [ 8.338511] ? subsys_dev_iter_exit+0x10/0x10 [ 8.338745] ? klist_node_init+0x61/0x80 [ 8.338956] bus_add_driver+0x254/0x2a0 [ 8.339164] driver_register+0xd3/0x150 [ 8.339370] ? 0xffffffffc0028000 [ 8.339550] do_one_initcall+0x84/0x250 [ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0 [ 8.340329] ? unpoison_range+0xf/0x30 [ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.340806] ? unpoison_range+0xf/0x30 [ 8.341014] ? unpoison_range+0xf/0x30 [ 8.341217] do_init_module+0xf8/0x350 [ 8.341419] load_module+0x3fe6/0x4340 [ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0 [ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.342101] ? module_frob_arch_sections+0x20/0x20 [ 8.342358] ? __do_sys_finit_module+0x108/0x170 [ 8.342604] __do_sys_finit_module+0x108/0x170 [ 8.342841] ? __ia32_sys_init_module+0x40/0x40 [ 8.343083] ? file_open_root+0x200/0x200 [ 8.343298] ? do_sys_open+0x85/0xe0 [ 8.343491] ? filp_open+0x50/0x50 [ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130 [ 8.343935] do_syscall_64+0x33/0x40 [ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.344401] RIP: 0033:0x7f08eb887cf7 [ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7 [ 8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003 [ 8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0 [ 8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001 [ 8.347836] Modules linked in: lanai(+) atm [ 8.348065] CR2: ffffc90000180024 [ 8.348244] ---[ end trace 7fdc1c668f2003e5 ]--- [ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.351918] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: eni: dont release is never initializedTong Zhang
label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen. In order to fix this issue, don't call phy->stop() in label err_eni_release [ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15atm: idt77252: fix build broken on amd64Tong Zhang
idt77252 is broken and wont load on amd64 systems modprobe idt77252 shows the following idt77252_init: skb->cb is too small (48 < 56) Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data so that the total size can be <= sizeof(skb->cb) Also convert runtime size check to buildtime size check in idt77252_init() Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-21atm: idt77252: call pci_disable_device() on error pathDan Carpenter
This error path needs to disable the pci device before returning. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: lanai: Remove in_interrupt() usageSebastian Andrzej Siewior
lanai_shutdown_tx_vci() uses in_interrupt() to issue a warning message if the function was used in context in which it is not safe to sleep. The usage of in_interrupt() in driver code is deprecated as it can not always detect all states where it is not allowed to sleep. msleep() has debug code which will trigger a warning if used in bad context. Remove in_interrupt(). Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: nicstar: Replace in_interrupt() usageSebastian Andrzej Siewior
push_scqe() uses in_interrupt() to figure out if it is allowed to sleep. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. ns_send() (the only caller of push_scqe()) has the following callers: - vcc_sendmsg() used as proto_ops::sendmsg is expected to be invoked in preemtible context. -> vcc->dev->ops->send() (ns_send()) - atm_vcc::send via atmdev_ops::send either directly (pointer copied by atm_init_aal34() or atm_init_aal5()) or via atm_send_aal0(). This is invoked by drivers (like br2684, clip, pppoatm, ...) which are called from net_device_ops::ndo_start_xmit with BH disabled. Add atmdev_ops::send_bh which is used by callers from BH context (atm_send_aal*()) and if this callback missing then ::send is used instead. Implement this callback in nicstar and use it to replace in_interrupt(). Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: nicstar: Unmap DMA on send errorSebastian Andrzej Siewior
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case push_scqe() fails to submit the `skb'. The memory of the `skb' is released so only the DMA mapping is leaking. Unmap the DMA mapping in case push_scqe() failed. Fixes: 864a3ff635fa7 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28atm: atmtcp: Constify atmtcp_v_dev_opsRikard Falkeborn
The only usage of atmtcp_v_dev_ops is to pass its address to atm_dev_register() which takes a pointer to const, and comparing its address to another address, which does not modify it. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04atm: eni: fix the missed pci_disable_device() for eni_init_one()Jing Xiangfeng
eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-08-24firestream: Fix memleak in fs_openDinghao Liu
When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...