summaryrefslogtreecommitdiff
path: root/drivers/atm
AgeCommit message (Collapse)Author
2021-04-26Merge tag 'irq-core-2021-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual updates from the irq departement: Core changes: - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be cleaned up which either use a seperate mechanism to prevent auto-enable at request time or have a racy mechanism which disables the interrupt right after request. - Get rid of the last usage of irq_create_identity_mapping() and remove the interface. - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable() are in task context and usually in cleanup, teardown code pathes. tasklet_disable() spinwaits for a tasklet which is currently executed. That's not only a problem for PREEMPT_RT where this can lead to a live lock when the disabling task preempts the softirq thread. It's also problematic in context of virtualization when the vCPU which runs the tasklet is scheduled out and the disabling code has to spin wait until it's scheduled back in. There are a few code pathes which invoke tasklet_disable() from non-sleepable context. For these a new disable variant which still spinwaits is provided which allows to switch tasklet_disable() to a sleep wait mechanism. For the atomic use cases this does not solve the live lock issue on PREEMPT_RT. That is mitigated by blocking on the RT specific softirq lock. - The PREEMPT_RT specific implementation of softirq processing and local_bh_disable/enable(). On RT enabled kernels soft interrupt processing happens always in task context and all interrupt handlers, which are not explicitly marked to be invoked in hard interrupt context are forced into task context as well. This allows to protect against softirq processing with a per CPU lock, which in turn allows to make BH disabled regions preemptible. Most of the softirq handling code is still shared. The RT/non-RT specific differences are addressed with a set of inline functions which provide the context specific functionality. The local_bh_disable() / local_bh_enable() mechanism are obviously seperate. - The usual set of small improvements and cleanups Driver changes: - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers - Extended functionality for MStar, STM32 and SC7280 irq chips - Enhanced robustness for ARM GICv3/4.1 drivers - The usual set of cleanups and improvements all over the place" * tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP irqchip/gic-v3: Do not enable irqs when handling spurious interrups dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller irqchip: Add support for IDT 79rc3243x interrupt controller irqdomain: Drop references to recusive irqdomain setup irqdomain: Get rid of irq_create_strict_mappings() irqchip/jcore-aic: Kill use of irq_create_strict_mappings() ARM: PXA: Kill use of irq_create_strict_mappings() irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection irqchip/tb10x: Use 'fallthrough' to eliminate a warning genirq: Reduce irqdebug cacheline bouncing kernel: Initialize cpumask before parsing irqchip/wpcm450: Drop COMPILE_TEST irqchip/irq-mst: Support polarity configuration irqchip: Add driver for WPCM450 interrupt controller dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic dt-bindings: qcom,pdc: Add compatible for sc7280 irqchip/stm32: Add usart instances exti direct event support irqchip/gic-v3: Fix OF_BAD_ADDR error handling irqchip/sifive-plic: Mark two global variables __ro_after_init ...
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17atm: eni: Use tasklet_disable_in_atomic() in the send() callbackSebastian Andrzej Siewior
The atmdev_ops::send callback which calls tasklet_disable() is invoked with bottom halfs disabled from net_device_ops::ndo_start_xmit(). All other invocations of tasklet_disable() in this driver happen in preemptible context. Change the send() call to use tasklet_disable_in_atomic() which allows tasklet_disable() to be made sleepable once the remaining atomic context usage sites are cleaned up. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210309084242.415583839@linutronix.de
2021-03-08atm: idt77252: fix null-ptr-dereferenceTong Zhang
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference. fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: uPD98402: fix incorrect allocationTong Zhang
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference. I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: lanai: dont run lanai_dev_close if not openTong Zhang
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the pci device is disabled. The caller, lanai_init_one(), then tries to run atm_dev_deregister(). This will subsequently call lanai_dev_close() and use the already released MMIO area. To fix this issue, set the lanai->base to NULL if open fail, and test the flag in lanai_dev_close(). [ 8.324153] lanai: lanai_start() failed, err=19 [ 8.324819] lanai(itf 0): shutting down interface [ 8.325211] BUG: unable to handle page fault for address: ffffc90000180024 [ 8.325781] #PF: supervisor write access in kernel mode [ 8.326215] #PF: error_code(0x0002) - not-present page [ 8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0 [ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI [ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12 [ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.333077] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.334932] Call Trace: [ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm] [ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai] [ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai] [ 8.335831] local_pci_probe+0x6f/0xb0 [ 8.336039] pci_device_probe+0x171/0x240 [ 8.336255] ? pci_device_remove+0xe0/0xe0 [ 8.336475] ? kernfs_create_link+0xb6/0x110 [ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 8.336983] really_probe+0x161/0x420 [ 8.337181] driver_probe_device+0x6d/0xd0 [ 8.337401] device_driver_attach+0x82/0x90 [ 8.337626] ? device_driver_attach+0x90/0x90 [ 8.337859] __driver_attach+0x60/0x100 [ 8.338065] ? device_driver_attach+0x90/0x90 [ 8.338298] bus_for_each_dev+0xe1/0x140 [ 8.338511] ? subsys_dev_iter_exit+0x10/0x10 [ 8.338745] ? klist_node_init+0x61/0x80 [ 8.338956] bus_add_driver+0x254/0x2a0 [ 8.339164] driver_register+0xd3/0x150 [ 8.339370] ? 0xffffffffc0028000 [ 8.339550] do_one_initcall+0x84/0x250 [ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0 [ 8.340329] ? unpoison_range+0xf/0x30 [ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.340806] ? unpoison_range+0xf/0x30 [ 8.341014] ? unpoison_range+0xf/0x30 [ 8.341217] do_init_module+0xf8/0x350 [ 8.341419] load_module+0x3fe6/0x4340 [ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0 [ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.342101] ? module_frob_arch_sections+0x20/0x20 [ 8.342358] ? __do_sys_finit_module+0x108/0x170 [ 8.342604] __do_sys_finit_module+0x108/0x170 [ 8.342841] ? __ia32_sys_init_module+0x40/0x40 [ 8.343083] ? file_open_root+0x200/0x200 [ 8.343298] ? do_sys_open+0x85/0xe0 [ 8.343491] ? filp_open+0x50/0x50 [ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130 [ 8.343935] do_syscall_64+0x33/0x40 [ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.344401] RIP: 0033:0x7f08eb887cf7 [ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7 [ 8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003 [ 8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0 [ 8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001 [ 8.347836] Modules linked in: lanai(+) atm [ 8.348065] CR2: ffffc90000180024 [ 8.348244] ---[ end trace 7fdc1c668f2003e5 ]--- [ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.351918] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01atm: eni: dont release is never initializedTong Zhang
label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen. In order to fix this issue, don't call phy->stop() in label err_eni_release [ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15atm: idt77252: fix build broken on amd64Tong Zhang
idt77252 is broken and wont load on amd64 systems modprobe idt77252 shows the following idt77252_init: skb->cb is too small (48 < 56) Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data so that the total size can be <= sizeof(skb->cb) Also convert runtime size check to buildtime size check in idt77252_init() Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-21atm: idt77252: call pci_disable_device() on error pathDan Carpenter
This error path needs to disable the pci device before returning. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: lanai: Remove in_interrupt() usageSebastian Andrzej Siewior
lanai_shutdown_tx_vci() uses in_interrupt() to issue a warning message if the function was used in context in which it is not safe to sleep. The usage of in_interrupt() in driver code is deprecated as it can not always detect all states where it is not allowed to sleep. msleep() has debug code which will trigger a warning if used in bad context. Remove in_interrupt(). Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: nicstar: Replace in_interrupt() usageSebastian Andrzej Siewior
push_scqe() uses in_interrupt() to figure out if it is allowed to sleep. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. ns_send() (the only caller of push_scqe()) has the following callers: - vcc_sendmsg() used as proto_ops::sendmsg is expected to be invoked in preemtible context. -> vcc->dev->ops->send() (ns_send()) - atm_vcc::send via atmdev_ops::send either directly (pointer copied by atm_init_aal34() or atm_init_aal5()) or via atm_send_aal0(). This is invoked by drivers (like br2684, clip, pppoatm, ...) which are called from net_device_ops::ndo_start_xmit with BH disabled. Add atmdev_ops::send_bh which is used by callers from BH context (atm_send_aal*()) and if this callback missing then ::send is used instead. Implement this callback in nicstar and use it to replace in_interrupt(). Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atm: nicstar: Unmap DMA on send errorSebastian Andrzej Siewior
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case push_scqe() fails to submit the `skb'. The memory of the `skb' is released so only the DMA mapping is leaking. Unmap the DMA mapping in case push_scqe() failed. Fixes: 864a3ff635fa7 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28atm: atmtcp: Constify atmtcp_v_dev_opsRikard Falkeborn
The only usage of atmtcp_v_dev_ops is to pass its address to atm_dev_register() which takes a pointer to const, and comparing its address to another address, which does not modify it. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04atm: eni: fix the missed pci_disable_device() for eni_init_one()Jing Xiangfeng
eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-08-24firestream: Fix memleak in fs_openDinghao Liu
When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-03atm: idt77252: avoid accessing the data mapped to streaming DMAJia-Ju Bai
In queue_skb(), skb->data is mapped to streaming DMA on line 850: dma_map_single(..., skb->data, ...); Then skb->data is accessed on lines 862 and 863: tbd->word_4 = (skb->data[0] << 24) | (skb->data[1] << 16) | (skb->data[2] << 8) | (skb->data[3] << 0); and on lines 893 and 894: tbd->word_4 = (skb->data[0] << 24) | (skb->data[1] << 16) | (skb->data[2] << 8) | (skb->data[3] << 0); These accesses may cause data inconsistency between CPU cache and hardware. To fix this problem, the calculation result of skb->data is stored in a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data. Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03atm: eni: avoid accessing the data mapped to streaming DMAJia-Ju Bai
In do_tx(), skb->data is mapped to streaming DMA on line 1111: paddr = dma_map_single(...,skb->data,DMA_TO_DEVICE); Then skb->data is accessed on line 1153: (skb->data[3] & 0xf) This access may cause data inconsistency between CPU cache and hardware. To fix this problem, skb->data[3] is assigned to a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data[3]. Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30atm: fix atm_dev refcnt leaks in atmtcp_remove_persistentXin Xiong
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a reference of atm_dev with increased refcount or NULL if fails. The refcount leaks issues occur in two error handling paths. If dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function returns 0 without decreasing the refcount kept by a local variable, resulting in refcount leaks. Fix the issue by adding atm_dev_put() before returning 0 both when dev_data->persist is zero or PRIV(dev)->vcc isn't NULL. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/atm: remove the atmdev_ops {get, set}sockopt methodsChristoph Hellwig
All implementations of these two methods are dummies that always return -EINVAL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-13atm: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26docs: networking: move ATM drivers to the hw driver sectionJakub Kicinski
Move docs for cxacru, fore200e and iphase under device_drivers/atm. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-28docs: networking: convert iphase.txt to ReSTMauro Carvalho Chehab
- add SPDX header; - adjust title using the proper markup; - mark code blocks and literals as such; - mark tables as such; - mark lists as such; - adjust identation, whitespaces and blank lines; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-28docs: networking: convert fore200e.txt to ReSTMauro Carvalho Chehab
- add SPDX header; - adjust title markup; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25.gitignore: remove too obvious commentsMasahiro Yamada
Some .gitignore files have comments like "Generated files", "Ignore generated files" at the header part, but they are too obvious. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-29atm: nicstar: fix if-statement empty body warningRandy Dunlap
When debugging via PRINTK() is not enabled, make the PRINTK() macro be an empty do-while block. Thix fixes a gcc warning when -Wextra is set: ../drivers/atm/nicstar.c:1819:23: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] I have verified that there is no object code change (with gcc 7.5.0). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chas Williams <3chas3@gmail.com> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25firestream: fix memory leaksWenwen Wang
In fs_open(), 'vcc' is allocated through kmalloc() and assigned to 'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g., there is no more free channel, an error code EBUSY or ENOMEM will be returned. However, 'vcc' is not deallocated, leading to memory leaks. Note that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated in fs_close(). But, if fs_open() fails, there is no guarantee that fs_close() will be invoked. To fix this issue, deallocate 'vcc' before the error code is returned. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08atm: eni: fix uninitialized variable warningArnd Bergmann
With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances: drivers/atm/eni.c: In function 'discard': drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized] writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4); ^ drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized] Change the code to always write zeroes instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-16fore200e: Fix incorrect checks of NULL pointer dereferenceAditya Pakki
In fore200e_send and fore200e_close, the pointers from the arguments are dereferenced in the variable declaration block and then checked for NULL. The patch fixes these issues by avoiding NULL pointer dereferences. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28atm: remove unneeded semicolonYueHaibing
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25atm: he: clean up an indentation issueColin Ian King
There is a statement that is indented one level too many, remove the extraneous tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ↵Christophe JAILLET
ATM_NICSTAR_USE_IDT77105 This should be IDT77105, not IDT77015. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02atm: iphase: Fix Spectre v1 vulnerabilityGustavo A. R. Silva
board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 02:24:56 +0000