| Age | Commit message (Collapse) | Author |
|---|
|
Use platform_get_resource() to fetch the memory resource and
platform_get_irq_optional() to get optional IRQ instead of
open-coded variants.
IRQ is not supposed to be changed at runtime, so there is
no functional change in ace_fsm_yieldirq().
On the other hand we now take first resources instead of last ones
to proceed. I can't imagine how broken should be firmware to have
a garbage in the first resource slots. But if it the case, it needs
to be documented.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the zoned mode is enabled in null_blk, Serializing read, write
and zone management operations for each zone is necessary to protect
device level information for managing zone resources (zone open and
closed counters) as well as each zone condition and write pointer
position. Commit 35bc10b2eafb ("null_blk: synchronization fix for
zoned device") introduced a spinlock to implement this serialization.
However, when memory backing is also enabled, GFP_NOIO memory
allocations are executed under the spinlock, resulting in might_sleep()
warnings. Furthermore, the zone_lock spinlock is locked/unlocked using
spin_lock_irq/spin_unlock_irq, similarly to the memory backing code with
the nullb->lock spinlock. This nested use of irq locks wrecks the irq
enabled/disabled state.
Fix all this by introducing a bitmap for per-zone lock, with locking
implemented using wait_on_bit_lock_io() and clear_and_wake_up_bit().
This locking mechanism allows keeping a zone locked while executing
null_process_cmd(), serializing all operations to the zone while
allowing to sleep during memory backing allocation with GFP_NOIO.
Device level zone resource management information is protected using
a spinlock which is not held while executing null_process_cmd();
Fixes: 35bc10b2eafb ("null_blk: synchronization fix for zoned device")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the cae of the REQ_OP_ZONE_RESET_ALL operation, the command sector is
ignored and the operation is applied to all sequential zones. For these
commands, tracing the effect of the command using the command sector to
determine the target zone is thus incorrect.
Fix null_zone_mgmt() zone condition tracing in the case of
REQ_OP_ZONE_RESET_ALL to apply tracing to all sequential zones that are
not already empty.
Fixes: 766c3297d7e1 ("null_blk: add trace in null_blk_zoned.c")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mounted NBD device can be resized, one use case is rbd-nbd.
Fix the issue by setting up default block size, then not touch it
in nbd_size_update() any more. This kind of usage is aligned with loop
which has same use case too.
Cc: stable@vger.kernel.org
Fixes: c8a83a6b54d0 ("nbd: Use set_blocksize() to set device blocksize")
Reported-by: lining <lining2020x@163.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jan Kara <jack@suse.cz>
Tested-by: lining <lining2020x@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Parallel write,read,zone-mgmt operations accessing/altering zone state
and write-pointer may get into race. Avoid the situation by using a new
spinlock for zoned device.
Concurrent zone-appends (on a zone) returning same write-pointer issue
is also avoided using this lock.
Cc: stable@vger.kernel.org
Fixes: e0489ed5daeb ("null_blk: Support REQ_OP_ZONE_APPEND")
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
|
|
The block layer provides special status codes when requests go beyond
the zone resource limits. Use these codes instead of the generic IOERR
for requests that exceed the max active or open limits the null_blk
device was configured with so that applications know how these special
conditions should be handled.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ceph updates from Ilya Dryomov:
- a patch that removes crush_workspace_mutex (myself). CRUSH
computations are no longer serialized and can run in parallel.
- a couple new filesystem client metrics for "ceph fs top" command
(Xiubo Li)
- a fix for a very old messenger bug that affected the filesystem,
marked for stable (myself)
- assorted fixups and cleanups throughout the codebase from Jeff and
others.
* tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits)
libceph: clear con->out_msg on Policy::stateful_server faults
libceph: format ceph_entity_addr nonces as unsigned
libceph: fix ENTITY_NAME format suggestion
libceph: move a dout in queue_con_delay()
ceph: comment cleanups and clarifications
ceph: break up send_cap_msg
ceph: drop separate mdsc argument from __send_cap
ceph: promote to unsigned long long before shifting
ceph: don't SetPageError on readpage errors
ceph: mark ceph_fmt_xattr() as printf-like for better type checking
ceph: fold ceph_update_writeable_page into ceph_write_begin
ceph: fold ceph_sync_writepages into writepage_nounlock
ceph: fold ceph_sync_readpages into ceph_readpage
ceph: don't call ceph_update_writeable_page from page_mkwrite
ceph: break out writeback of incompatible snap context to separate function
ceph: add a note explaining session reject error string
libceph: switch to the new "osd blocklist add" command
libceph, rbd, ceph: "blacklist" -> "blocklist"
ceph: have ceph_writepages_start call pagevec_lookup_range_tag
ceph: use kill_anon_super helper
...
|
|
Persistent grants feature provides high scalability. On some small
systems, however, it could incur data copy overheads[1] and thus it is
required to be disabled. It can be disabled from blkback side using a
module parameter, 'feature_persistent'. But, it is impossible from
blkfront side. For the reason, this commit adds a blkfront module
parameter for disabling of the feature.
[1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200923061841.20531-3-sjpark@amazon.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Persistent grants feature provides high scalability. On some small
systems, however, it could incur data copy overheads[1] and thus it is
required to be disabled. But, there is no option to disable it. For
the reason, this commit adds a module parameter for disabling of the
feature.
[1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200923061841.20531-2-sjpark@amazon.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- A single patch to fix the Xen security issue XSA-331 (malicious
guests can DoS dom0 by triggering NULL-pointer dereferences or access
to stale data).
- A larger series to fix the Xen security issue XSA-332 (malicious
guests can DoS dom0 by sending events at high frequency leading to
dom0's vcpus being busy in IRQ handling for elongated times).
* tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: block rogue events for some time
xen/events: defer eoi in case of excessive number of events
xen/events: use a common cpu hotplug hook for event channels
xen/events: switch user event channels to lateeoi model
xen/pciback: use lateeoi irq binding
xen/pvcallsback: use lateeoi irq binding
xen/scsiback: use lateeoi irq binding
xen/netback: use lateeoi irq binding
xen/blkback: use lateeoi irq binding
xen/events: add a new "late EOI" evtchn framework
xen/events: fix race in evtchn_fifo_unmask()
xen/events: add a proper barrier to 2-level uevent unmasking
xen/events: avoid removing an event channel while handling it
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving blkfront use the lateeoi
irq binding for blkback and unmask the event channel only after
processing all pending requests.
As the thread processing requests is used to do purging work in regular
intervals an EOI may be sent only after having received an event. If
there was no pending I/O request flag the EOI as spurious.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Mikhail reported a lockdep spat detailing how __zram_bvec_read() and
__zram_bvec_write() use zstrm->lock and zspage->lock in opposite order.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
|
|
If we fail to decompress in zram it's a pretty serious problem. We were
entrusted to be able to decompress the old data but we failed. Either
we've got some crazy bug in the compression code or we've got memory
corruption.
At the moment, when this happens the log looks like this:
ERR kernel: [ 1833.099861] zram: Decompression failed! err=-22, page=336112
ERR kernel: [ 1833.099881] zram: Decompression failed! err=-22, page=336112
ALERT kernel: [ 1833.099886] Read-error on swap-device (253:0:2688896)
It is true that we have an "ALERT" level log in there, but (at least to
me) it feels like even this isn't enough to impart the seriousness of this
error. Let's convert to a WARN_ON. Note that WARN_ON is automatically
"unlikely" so we can simply replace the old annotation with the new one.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.kernel.org/r/20200917174059.1.If09c882545dbe432268f7a67a4d4cfcb6caace4f@changeid
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
There has one race case for ceph's rbd-nbd tool. When do mapping
it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually
the nbd device has already unmaped.
It dues to if just after the wake_up(), the recv_work() is scheduled
out and defers calling the nbd_config_put(), though the map process
has exited the "nbd->recv_task" is not cleared.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After send_msg_open is done, send_msg_close should be done
if any error occurs and it is necessary to recover
what has been done.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The max_hw_secotrs is only limited by the transport, not remote device,
block layer on server side will split to the device limit if it's too
big.
The max_segments, similar, and rtrs server will submit single buffer, so
no need to cap.
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The argument is not needed since all callers pass 1 for it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
|
|
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
|
|
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DRBD keeps a block device open just to get and set the capacity from
it. Switch to primarily using the disk capacity as intended by the
block layer, and sync it to the bdev using revalidate_disk_size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace /* Fall through. */ comment with the new pseudo-keyword macro
fallthrough[1].
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In _drbd_send_page() a page is checked by following code before sending
it by kernel_sendpage(),
(page_count(page) < 1) || PageSlab(page)
If the check is true, this page won't be send by kernel_sendpage() and
handled by sock_no_sendpage().
This kind of check is exactly what macro sendpage_ok() does, which is
introduced into include/linux/net.h to solve a similar send page issue
in nvme-tcp code.
This patch uses macro sendpage_ok() to replace the open coded checks to
page type and refcount in _drbd_send_page(), as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for user space to set a max open zone and a max active zone
limit via configfs. By default, the default values are 0 == no limit.
Call the block layer API functions used for exposing the configured
limits to sysfs.
Add accounting in null_blk_zoned so that these new limits are respected.
Performing an operation that would exceed these limits results in a
standard I/O error.
A max open zone limit exists in the ZBC standard.
While null_blk_zoned is used to test the Zoned Block Device model in
Linux, when it comes to differences between ZBC and ZNS, null_blk_zoned
mostly follows ZBC.
Therefore, implement the manage open zone resources function from ZBC,
but additionally add support for max active zones.
This enables user space not only to test against a device with an open
zone limit, but also to test against a device with an active zone limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ->bd_contains field is set by __blkdev_get and drivers have no
business manipulating it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bd_disk is set on all block devices, including those for partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support a shared tag bitmap, whereby request tags are unique over all
submission queues, and not just per submission queue.
As such, per device total queue depth is normally hw_queue_depth *
submit_queues, but hw_queue_depth when set. And a similar story for when
shared_tags is set, where that is the queue depth over all null blk
devices.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
|
|
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
decided if ->rw_page can be used on a block device. Just check up for
the method instead. The only complication is that zram needs a second
set of block_device_operations as it can switch between modes that
actually support ->rw_page and those who don't.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
aoe forces a larger readahead size, but any reason to do larger I/O
is not limited to readahead. Also set the optimal I/O size, and
remove the local constants in favor of just using SZ_2G.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ever since the switch to blk-mq, a lower device not used for VM
writeback will not be marked congested, so the check will never
trigger.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use blkdev_get_by_dev instead of bdgrab + blkdev_get.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace bdget + blkdev_get by blkdev_get_by_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove code which has been dead since the initial commit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The pcd driver does not have a ->revalidate_disk method, so it can just
use bdev_check_media_change without any additional changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a struct ace_device to ace_revalidate_disk, move the media changed
check into the one caller that needs it, and give the routine a better
name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to use bdev_check_media_change instead of check_disk_change and
call ace_revalidate_disk manually. Given that ace_revalidate_disk only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to use bdev_check_media_changed instead of check_disk_change and
call floppy_revalidate manually. Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
floppy_revalidate mostly duplicates work already done in floppy_open
despite only beeing called from floppy_open. Remove the function and
just clear the ->ejected flag directly under the right condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to use bdev_check_media_change instead of check_disk_change and
call floppy_revalidate manually. Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
