summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2011-02-17tpm_tis: Use timeouts returned from TPMStefan Berger
commit 9b29050f8f75916f974a2d231ae5d3cd59792296 upstream. The current TPM TIS driver in git discards the timeout values returned from the TPM. The check of the response packet needs to consider that the return_code field is 0 on success and the size of the expected packet is equivalent to the header size + u32 length indicator for the TPM_GetCapability() result + 3 timeout indicators of type u32. I am also adding a sysfs entry 'timeouts' showing the timeouts that are being used. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17TPM: Long default timeout fixRajiv Andrade
commit c4ff4b829ef9e6353c0b133b7adb564a68054979 upstream. If duration variable value is 0 at this point, it's because chip->vendor.duration wasn't filled by tpm_get_timeouts() yet. This patch sets then the lowest timeout just to give enough time for tpm_get_timeouts() to further succeed. This fix avoids long boot times in case another entity attempts to send commands to the TPM when the TPM isn't accessible. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17hvc_iucv: allocate memory buffers for IUCV in zone DMAHendrik Brueckner
commit 91a970d9889c7d6f451ee91ed361d0f0119d3778 upstream. The device driver must allocate memory for IUCV buffers with GFP_DMA, because IUCV cannot address memory above 2GB (31bit addresses only). Because the IUCV ignores the higher bits of the address, sending and receiving IUCV data with this driver might cause memory corruptions. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: maximilian attems <max@stro.at>
2011-01-07hvc_console: Fix race between hvc_close and hvc_remove, againAnton Blanchard
commit 320718ee074acce5ffced6506cb51af1388942aa upstream. I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07hvc_console: Fix race between hvc_close and hvc_removeAmit Shah
commit e74d098c66543d0731de62eb747ccd5b636a6f4c upstream. Alan pointed out a race in the code where hvc_remove is invoked. The recent virtio_console work is the first user of hvc_remove(). Alan describes it thus: The hvc_console assumes that a close and remove call can't occur at the same time. In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous itself.... So this can happen hvc_close hvc_remove hung up ? - no lock tty = hp->tty unlock lock hp->tty = NULL unlock notify del kref_put the hvc struct close completes tty is destroyed tty_hangup dead tty tty->ops will be NULL NULL->... This patch adds some tty krefs and also converts to using tty_vhangup(). Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linuxppc-dev@ozlabs.org CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07TTY: Fix error return from tty_ldisc_open()Ben Hutchings
The backported version of "TTY: ldisc, fix open flag handling" in 2.6.32.27 causes tty_ldisc_open() to return 0 on error. Fix that. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09TTY: ldisc, fix open flag handlingJiri Slaby
commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream. When a concrete ldisc open fails in tty_ldisc_open, we forget to clear TTY_LDISC_OPEN. This causes a false warning on the next ldisc open: WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38() Hardware name: System Product Name Modules linked in: ... Pid: 5251, comm: a.out Tainted: G W 2.6.32-5-686 #1 Call Trace: [<c1030321>] ? warn_slowpath_common+0x5e/0x8a [<c1030357>] ? warn_slowpath_null+0xa/0xc [<c119311c>] ? tty_ldisc_open+0x26/0x38 [<c11936c5>] ? tty_set_ldisc+0x218/0x304 ... So clear the bit when failing... Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in 2.6.31-rc1. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Reported-by: Sergey Lapin <slapin@ossfans.org> Tested-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09tty_ldisc: Fix BUG() on hangupPhilippe Rétornaz
commit 1c95ba1e1de7edffc0c4e275e147f1a9eb1f81ae upstream. A kernel BUG when bluetooth rfcomm connection drop while the associated serial port is open is sometime triggered. It seems that the line discipline can disappear between the tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line discipline if the previous discipline is not available anymore. Signed-off-by: Philippe Retornaz <philippe.retornaz@epfl.ch> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09TTY: restore tty_ldisc_wait_idleJiri Slaby
commit 100eeae2c5ce23b4db93ff320ee330ef1d740151 upstream. It was removed in 65b770468e98 (tty-ldisc: turn ldisc user count into a proper refcount), but we need to wait for last user to quit the ldisc before we close it in tty_set_ldisc. Otherwise weird things start to happen. There might be processes waiting in tty_read->n_tty_read on tty->read_wait for input to appear and at that moment, a change of ldisc is fatal. n_tty_close is called, it frees read_buf and the waiting process is still in the middle of reading and goes nuts after it is woken. Previously we prevented close to happen when others are in ldisc ops by tty_ldisc_wait_idle in tty_set_ldisc. But the commit above removed that. So revoke the change and test whether there is 1 user (=we), and allow the close then. We can do that without ldisc/tty locks, because nobody else can open the device due to TTY_LDISC_CHANGING bit set, so we in fact wait for everybody to leave. I don't understand why tty_ldisc_lock would be needed either when the counter is an atomic variable, so this is a lockless tty_ldisc_wait_idle. On the other hand, if we fail to wait (timeout or signal), we have to reenable the halted ldiscs, so we take ldisc lock and reuse the setup path at the end of tty_set_ldisc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> LKML-Reference: <20101031104136.GA511@Chamillionaire.breakpoint.cc> LKML-Reference: <1287669539-22644-1-git-send-email-jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09tty: prevent DOS in the flush_to_ldiscJiri Olsa
commit e045fec48970df84647a47930fcf7a22ff7229c0 upstream. There's a small window inside the flush_to_ldisc function, where the tty is unlocked and calling ldisc's receive_buf function. If in this window new buffer is added to the tty, the processing might never leave the flush_to_ldisc function. This scenario will hog the cpu, causing other tty processing starving, and making it impossible to interface the computer via tty. I was able to exploit this via pty interface by sending only control characters to the master input, causing the flush_to_ldisc to be scheduled, but never actually generate any output. To reproduce, please run multiple instances of following code. - SNIP #define _XOPEN_SOURCE #include <stdlib.h> #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> int main(int argc, char **argv) { int i, slave, master = getpt(); char buf[8192]; sprintf(buf, "%s", ptsname(master)); grantpt(master); unlockpt(master); slave = open(buf, O_RDWR); if (slave < 0) { perror("open slave failed"); return 1; } for(i = 0; i < sizeof(buf); i++) buf[i] = rand() % 32; while(1) { write(master, buf, sizeof(buf)); } return 0; } - SNIP The attached patch (based on -next tree) fixes this by checking on the tty buffer tail. Once it's reached, the current work is rescheduled and another could run. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drivers/char/vt_ioctl.c: fix VT_OPENQRY error valueGraham Gower
commit 1e0ad2881d50becaeea70ec696a80afeadf944d2 upstream. When all VT's are in use, VT_OPENQRY casts -1 to unsigned char before returning it to userspace as an int. VT255 is not the next available console. Signed-off-by: Graham Gower <graham.gower@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09hpet: unmap unused I/O spaceJiri Slaby
commit a56d5318716d120e040294bb258901ba89fb9c90 upstream. When the initialization code in hpet finds a memory resource and does not find an IRQ, it does not unmap the memory resource previously mapped. There are buggy BIOSes which report resources exactly like this and what is worse the memory region bases point to normal RAM. This normally would not matter since the space is not touched. But when PAT is turned on, ioremap causes the page to be uncached and sets this bit in page->flags. Then when the page is about to be used by the allocator, it is reported as: BUG: Bad page state in process md5sum pfn:3ed00 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 page flags: 0x20000001000000(uncached) Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1 Call Trace: [<ffffffff810df851>] bad_page+0xb1/0x100 [<ffffffff810dfa45>] prep_new_page+0x1a5/0x1c0 [<ffffffff810dfe01>] get_page_from_freelist+0x3a1/0x640 [<ffffffff810e01af>] __alloc_pages_nodemask+0x10f/0x6b0 ... In this particular case: 1) HPET returns 3ed00000 as memory region base, but it is not in reserved ranges reported by the BIOS (excerpt): BIOS-e820: 0000000000100000 - 00000000af6cf000 (usable) BIOS-e820: 00000000af6cf000 - 00000000afdcf000 (reserved) 2) there is no IRQ resource reported by HPET method. On the other hand, the Intel HPET specs (1.0a) says (3.2.5.1): _CRS ( // Report 1K of memory consumed by this Timer Block memory range consumed // Optional: only used if BIOS allocates Interrupts [1] IRQs consumed ) [1] For case where Timer Block is configured to consume IRQ0/IRQ8 AND Legacy 8254/Legacy RTC hardware still exists, the device objects associated with 8254 & RTC devices should not report IRQ0/IRQ8 as "consumed resources". So in theory we should check whether if it is the case and use those interrupts instead. Anyway the address reported by the BIOS here is bogus, so non-presence of IRQ doesn't mean the "optional" part in point 2). Since I got no reply previously, fix this by simply unmapping the space when IRQ is not found and memory region was mapped previously. It would be probably more safe to walk the resources again and unmap appropriately depending on type. But as we now use only ioremap for both 2 memory resource types, it is not necessarily needed right now. Addresses https://bugzilla.novell.com/show_bug.cgi?id=629908 Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09hpet: fix unwanted interrupt due to stale irq status bitClemens Ladisch
commit 96e9694df446d1154ec2f4fdba8908588b9cba38 upstream. Jaswinder Singh Rajput wrote: > By executing Documentation/timers/hpet_example.c > > for polling, I requested for 3 iterations but it seems iteration work > for only 2 as first expired time is always very small. > > # ./hpet_example poll /dev/hpet 10 3 > -hpet: executing poll > hpet_poll: info.hi_flags 0x0 > hpet_poll: expired time = 0x13 > hpet_poll: revents = 0x1 > hpet_poll: data 0x1 > hpet_poll: expired time = 0x1868c > hpet_poll: revents = 0x1 > hpet_poll: data 0x1 > hpet_poll: expired time = 0x18645 > hpet_poll: revents = 0x1 > hpet_poll: data 0x1 Clearing the HPET interrupt enable bit disables interrupt generation but does not disable the timer, so the interrupt status bit will still be set when the timer elapses. If another interrupt arrives before the timer has been correctly programmed (due to some other device on the same interrupt line, or CONFIG_DEBUG_SHIRQ), this results in an extra unwanted interrupt event because the status bit is likely to be set from comparator matches that happened before the device was opened. Therefore, we have to ensure that the interrupt status bit is and stays cleared until we actually program the timer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Bob Picco <bpicco@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22pcmcia: synclink_cs: fix information leak to userlandVasiliy Kulikov
commit 5b917a1420d3d1a9c8da49fb0090692dc9aaee86 upstream. Structure new_line is copied to userland with some padding fields unitialized. It leads to leaking of stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-26sis-agp: Remove SIS 760, handled by amd64-agpBen Hutchings
commit d831692a1a8e9ceaaa9bb16bb3fc503b7e372558 upstream. SIS 760 is listed in the device tables for both amd64-agp and sis-agp. amd64-agp is apparently preferable since it has workarounds for some BIOS misconfigurations that sis-agp doesn't handle. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-26char: Mark /dev/zero and /dev/kmem as not capable of writebackJan Kara
commit 371d217ee1ff8b418b8f73fb2a34990f951ec2d4 upstream. These devices don't do any writeback but their device inodes still can get dirty so mark bdi appropriately so that bdi code does the right thing and files inodes to lists of bdi carrying the device inodes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13nvram: Fix write beyond end condition; prove to gcc copy is safeH. Peter Anvin
commit a01c7800420d2c294ca403988488a635d4087a6d upstream. In nvram_write, first of all, correctly handle the case where the file pointer is already beyond the end; we should return EOF in that case. Second, make the logic a bit more explicit so that gcc can statically prove that the copy_from_user() is safe. Once the condition of the beyond-end filepointer is eliminated, the copy is safe but gcc can't prove it, causing build failures for i386 allyesconfig. Third, eliminate the entirely superfluous variable "len", and just use the passed-in variable "count" instead. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <tip-*@git.kernel.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02amd64-agp: Probe unknown AGP devices the right wayBen Hutchings
commit 6fd024893911dcb51b4a0aa71971db5ba38f7071 upstream. The current initialisation code probes 'unsupported' AGP devices simply by calling its own probe function. It does not lock these devices or even check whether another driver is already bound to them. We must use the device core to manage this. So if the specific device id table didn't match anything and agp_try_unsupported=1, switch the device id table and call driver_attach() again. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02tpm_tis: fix subsequent suspend failuresRajiv Andrade
commit 59f6fbe4291fcc078ba26ce4edf8373a7620a13a upstream. Fix subsequent suspends by issuing tpm_continue_selftest during resume. Otherwise, the tpm chip seems to be not fully initialized and will reject the save state command during suspend, thus preventing the whole system to suspend. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: David Safford <safford@watson.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02TPM: ReadPubEK output struct fixRajiv Andrade
commit 02a077c52ef7631275a79862ffd9f3dbe9d38bc2 upstream. This patch adds a missing element of the ReadPubEK command output, that prevents future overflow of this buffer when copying the TPM output result into it. Prevents a kernel panic in case the user tries to read the pubek from sysfs. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-05ipmi: handle run_to_completion properly in deliver_recv_msg()Jiri Kosina
commit a747c5abc329611220f16df0bb4cf0ca4a7fdf0c upstream. If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-12x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD ↵Borislav Petkov
systems commit 0e152cd7c16832bd5cadee0c2e41d9959bc9b6f9 upstream. de957628ce7c84764ff41331111036b3ae5bad0f changed setting of the x86_init.iommu.iommu_init function ptr only when GART IOMMU is found. One side effect of it is that num_k8_northbridges is not initialized anymore if not explicitly called. This resulted in uninitialized pointers in <arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>, for example, which uses the num_k8_northbridges thing through node_to_k8_nb_misc(). Fix that through an initcall that runs right after the PCI subsystem and does all the scanning. Then, remove initialization in gart_iommu_init() which is a rootfs_initcall and we're running before that. What is more, since num_k8_northbridges is being used in other places beside GART IOMMU, include it whenever we add AMD CPU support. The previous dependency chain in kconfig contained K8_NB depends on AGP_AMD64|GART_IOMMU which was clearly incorrect. The more natural way in terms of hardware dependency should be AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD && PCI. Make it so Number One! Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Joerg Roedel <joerg.roedel@amd.com> LKML-Reference: <20100312144303.GA29262@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26tpm: autoload tpm_tis based on system PnP IDsMatt Domsch
commit 31bde71c202722a76686c3cf69a254c8a912275a upstream. The tpm_tis driver already has a list of supported pnp_device_ids. This patch simply exports that list as a MODULE_DEVICE_TABLE() so that the module autoloader will discover and load the module at boottime. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26agp/hp: fixup hp agp after ACPI changesBjorn Helgaas
commit 67fe63b0715ccfaefa0af8a6e705c5470ee5cada upstream. Commit 15b8dd53f5ffa changed the string in info->hardware_id from a static array to a pointer and added a length field. But instead of changing "sizeof(array)" to "length", we changed it to "sizeof(length)" (== 4), which corrupts the string we're trying to null-terminate. We no longer even need to null-terminate the string, but we *do* need to check whether we found a HID. If there's no HID, we used to have an empty array, but now we have a null pointer. The combination of these defects causes this oops: Unable to handle kernel NULL pointer dereference (address 0000000000000003) modprobe[895]: Oops 8804682956800 [1] ip is at zx1_gart_probe+0xd0/0xcc0 [hp_agp] http://marc.info/?l=linux-ia64&m=126264484923647&w=2 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: Émeric Maschino <emeric.maschino@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26intel-agp: Switch to wbinvd_on_all_cpusBorislav Petkov
commit 48a719c238bcbb72d6da79de9c5b3b93ab472107 upstream. Simplify if-statement while at it. [ hpa: we need to #include <asm/smp.h> ] Cc: Dave Jones <davej@redhat.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1264172467-25155-3-git-send-email-bp@amd64.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26raw: fsync method is now requiredAnton Blanchard
commit 55ab3a1ff843e3f0e24d2da44e71bffa5d853010 upstream. Commit 148f948ba877f4d3cdef036b1ff6d9f68986706a (vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke the raw driver. We now call through generic_file_aio_write -> generic_write_sync -> vfs_fsync_range. vfs_fsync_range has: if (!fop || !fop->fsync) { ret = -EINVAL; goto out; } But drivers/char/raw.c doesn't set an fsync method. We have two options: fix it or remove the raw driver completely. I'm happy to do either, the fact this has been broken for so long suggests it is rarely used. The patch below adds an fsync method to the raw driver. My knowledge of the block layer is pretty sketchy so this could do with a once over. If we instead decide to remove the raw driver, this patch might still be useful as a backport to 2.6.33 and 2.6.32. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26tty: release_one_tty() forgets to put pidsOleg Nesterov
commit 6da8d866d0d39e9509ff826660f6a86a6757c966 upstream. release_one_tty(tty) can be called when tty still has a reference to pgrp/session. In this case we leak the pid. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01tty: Keep the default buffering to sub-page unitsAlan Cox
commit d9661adfb8e53a7647360140af3b92284cbe52d4 upstream. We allocate during interrupts so while our buffering is normally diced up small anyway on some hardware at speed we can pressure the VM excessively for page pairs. We don't really need big buffers to be linear so don't try so hard. In order to make this work well we will tidy up excess callers to request_room, which cannot itself enforce this break up. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15tty: Fix the ldisc hangup raceAlan Cox
commit 638b9648ab51c9c549ff5735d3de519ef6199df3 upstream. This was noticed by Matthias Urlichs and he proposed a fix. This patch does the fixing a different way to avoid introducing several new race conditions into the code. The problem case is TTY_DRIVER_RESET_TERMIOS = 0. In that case while we abort the ldisc change, the hangup processing has not cleaned up and restarted the ldisc either. We can't restart the ldisc stuff in the set_ldisc as we don't know what the hangup did and may touch stuff we shouldn't as we are no longer supposed to influence the tty at that point in case it has been re-opened before we get rescheduled. Instead do it the simple way. Always re-init the ldisc on the hangup, but use TTY_DRIVER_RESET_TERMIOS to indicate that we should force N_TTY. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15tpm_tis: TPM_STS_DATA_EXPECT workaroundRajiv Andrade
commit 3507d612366a4e81226295f646410130a1f62a5c upstream. Some newer Lenovo models are shipped with a TPM that doesn't seem to set the TPM_STS_DATA_EXPECT status bit when sending it a burst of data, so the code understands it as a failure and doesn't proceed sending the chip the intended data. In this patch we bypass this bit check in case the itpm module parameter was set. This patch is based on Andy Isaacson's one: http://marc.info/?l=linux-kernel&m=124650185023495&w=2 It was heavily discussed how should we deal with identifying the chip in kernel space, but the required patch to do so was NACK'd: http://marc.info/?l=linux-kernel&m=124650186423711&w=2 This way we let the user choose using this workaround or not based on his observations on this code behavior when trying to use the TPM. Fixed a checkpatch issue present on the previous patch, thanks to Daniel Walker. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Tested-by: Seiji Munetoh <seiji.munetoh@gmail.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-23devmem: fix kmem write bug on memory holesWu Fengguang
commit c85e9a97c4102ce2e83112da850d838cfab5ab13 upstream devmem: fix kmem write bug on memory holes [ cebbert@redhat.com : backport to 2.6.32 ] write_kmem() used to assume vwrite() always return the full buffer length. However now vwrite() could return 0 to indicate memory hole. This creates a bug that "buf" is not advanced accordingly. Fix it to simply ignore the return value, hence the memory hole. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-23devmem: check vmalloc address on kmem read/writeKAMEZAWA Hiroyuki
commit 325fda71d0badc1073dc59f12a948f24ff05796a [ cebbert@redhat.com : backport to 2.6.32 ] devmem: check vmalloc address on kmem read/write Otherwise vmalloc_to_page() will BUG(). This also makes the kmem read/write implementation aligned with mem(4): "References to nonexistent locations cause errors to be returned." Here we return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from user space, otherwise return partial read/write results. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-23/dev/mem: introduce size_inside_page()Wu Fengguang
commit f222318e9c3a315723e3524fb9d6566b2430db44 upstream /dev/mem: introduce size_inside_page() [ cebbert@redhat.com : backport to 2.6.32 ] [ subset of original patch, for just /dev/kmem ] Introduce size_inside_page() to replace duplicate /dev/mem code. Also apply it to /dev/kmem, whose alignment logic was buggy. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-23tpm_infineon: fix suspend/resume handler for pnp_driverMarcel Selhorst
commit 93716b9470fbfd9efdc7d0f2445cb34635de3f6d upstream. When suspending, tpm_infineon calls the generic suspend function of the TPM framework. However, the TPM framework does not return and the system hangs upon suspend. When sending the necessary command "TPM_SaveState" directly within the driver, suspending and resuming works fine. Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-23Fix race in tty_fasync() properlyLinus Torvalds
commit 80e1e823989ec44d8e35bdfddadbddcffec90424 upstream. This reverts commit 703625118069 ("tty: fix race in tty_fasync") and commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/ restore") that tried to fix up some of the fallout but was incomplete. It turns out that we really cannot hold 'tty->ctrl_lock' over calling __f_setown, because not only did that cause problems with interrupt disables (which the second commit fixed), it also causes a potential ABBA deadlock due to lock ordering. Thanks to Tetsuo Handa for following up on the issue, and running lockdep to show the problem. It goes roughly like this: - f_getown gets filp->f_owner.lock for reading without interrupts disabled, so an interrupt that happens while that lock is held can cause a lockdep chain from f_owner.lock -> sighand->siglock. - at the same time, the tty->ctrl_lock -> f_owner.lock chain that commit 703625118069 introduced, together with the pre-existing sighand->siglock -> tty->ctrl_lock chain means that we have a lock dependency the other way too. So instead of extending tty->ctrl_lock over the whole __f_setown() call, we now just take a reference to the 'pid' structure while holding the lock, and then release it after having done the __f_setown. That still guarantees that 'struct pid' won't go away from under us, which is all we really ever needed. Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Américo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-09random: Remove unused inode variableHerbert Xu
commit cd1510cb5f892907fe1a662f90b41fb3a42954e0 upstream. The previous changeset left behind an unused inode variable. This patch removes it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-09random: drop weird m_time/a_time manipulationMatt Mackall
commit a996996dd75a9086b12d1cb4010f26e1748993f0 upstream. No other driver does anything remotely like this that I know of except for the tty drivers, and I can't see any reason for random/urandom to do it. In fact, it's a (trivial, harmless) timing information leak. And obviously, it generates power- and flash-cycle wasting I/O, especially if combined with something like hwrngd. Also, it breaks ubifs's expectations. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25nozomi: quick fix for the close/close bugAlan Cox
commit eeec32a731631a9bad9abb21c626b9f2840bee0d upstream. Nozomi goes wrong if you get the sequence open open close [stuff] close which turns out to occur on some ppp type setups. This is a quick patch up for the problem. It's not really fixing Nozomi which completely fails to implement tty open/close semantics and all the other needed stuff. Doing it right is a rather more invasive patch set and not one that will backport. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25tty: fix race in tty_fasyncGreg Kroah-Hartman
commit 703625118069f9f8960d356676662d3db5a9d116 upstream. We need to keep the lock held over the call to __f_setown() to prevent a PID race. Thanks to Al Viro for pointing out the problem, and to Travis for making us look here in the first place. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Julien Tinnes <jln@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-18agp/intel-agp: Clear entire GTT on startupDavid Woodhouse
commit fc61901373987ad61851ed001fe971f3ee8d96a3 upstream. Some BIOSes fail to initialise the GTT, which will cause DMA faults when the IOMMU is enabled. We need to clear the whole thing to point at the scratch page, not just the part that Linux is going to use. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> [anholt: Note that this may also help with stability in the presence of driver bugs, by not drawing to memory we don't own] Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30tty_port: handle the nonblocking open of a dead port corner caseAlan Cox
Some drivers allow O_NDELAY of a dead port (eg for setserial to work). In that situation we must not try to raise the carrier. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: keyboard - fix braille keyboard keysym generation
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Select CONFIG_SHMEM drm/i915: Fix CRT hotplug detect by checking really no channels attached agp/intel: new host bridge support drm/i915: Add more registers save/restore for Ironlake suspend drm/i915: Fix IRQ stall issue on Ironlake drm/i915: HDMI hardware workaround for Ironlake drm/i915: Fix and cleanup DPLL calculation for Ironlake drm/i915: Avoid potential sleep whilst holding spinlock
2009-11-25Input: keyboard - fix braille keyboard keysym generationSamuel Thibault
Keysyms stored in key_map[] are not simply K() values, but U(K()) values, as can be seen in the KDSKBENT ioctl handler. The kernel-generated braille keysyms thus need a U() call too. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-19vt: Fix use of "new" in a struct fieldAlan Cox
As this struct is exposed to user space and the API was added for this release it's a bit of a pain for the C++ world and we still have time to fix it. Rename the fields before we end up with that pain in an actual release. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Olivier Goffart Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-18Merge branch 'agp-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()
2009-11-19agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()David Woodhouse
We should set this before calling agp_add_bridge() so that it's done before we map the scratch page too. This should probably fix the regression reported as k.o. bug #14627. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-17tty_port: If we are opened non blocking we still need to raise the carrierAlan Cox
Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate. (There is a second question here about whether we should do so if CLOCAL is set but that can wait) Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-12agp/intel: new host bridge supportZhenyu Wang
Add new CPU host bridge id, needed for support Ironlake graphics device with it. No change for graphics device itself, so no need to update drm/i915. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05Merge branch 'bugfix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: mask extended topology info in cpuid xen/hvc: make sure console output is always emitted, with explicit polling
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 18:51:36 +0000