summaryrefslogtreecommitdiff
path: root/drivers/clk/mediatek
AgeCommit message (Collapse)Author
2018-06-04Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', ↵Stephen Boyd
'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next * clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR
2018-05-15clk: mediatek: add g3dsys support for MT2701 and MT7623Sean Wang
Add clock driver support for g3dsys on MT2701 and MT7623, which is providing essential clock gate and reset controller to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: mediatek: correct the clocks for MT2701 HDMI PHY moduleRyder Lee
The hdmitx_dig_cts clock signal is not a child of clk26m, and the actual output of the PLL block is derived from the tvdpll via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and ↵Stephen Boyd
'clk-renesas' into clk-next * clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
2018-03-20clk: mediatek: add audsys support for MT2701Ryder Lee
Add clock driver support for MT2701 audsys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: mediatek: add devm_of_platform_populate() for MT7622 audsysRyder Lee
Add devm_of_platform_populate() to populate devices which are children of the root node. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: update clock driver of MT2712Weiyi Lu
According to ECO design change, 1. add new clock mux data and change some 2. add new clock gate data and clock factor data 3. change status register offset of infra subsystem Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: update missing clock data for MT7622 audsysRyder Lee
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: fix PWM clock source by adding a fixed-factor clockSean Wang
The clock for which all PWM devices on MT7623 or MT2701 actually depending on has to be divided by four from its parent clock axi_sel in the clock path prior to PWM devices. Consequently, adding a fixed-factor clock axisel_d4 as one-fourth of clock axi_sel allows that PWM devices can have the correct resolution calculation. Cc: stable@vger.kernel.org Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-01-10clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being builtSean Wang
Changes from v1->v2: Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should be quite reasonable because the reset controller is tightly embedded inside and exported from these clock subsystems. At least it can be found on infracfg and pericfg subsystem that both are really fundamental block lots of devices must depend on. commit 74cb0d6dde8 ("clk: mediatek: fixup test-building of MediaTek clock drivers") can let the build system looking into the directory where the clock drivers resides and then allow test-building the drivers. But the change also gives rise to certain incorrect behavior which is reset.c being built even not depending on either COMPILE_TEST or ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built unexpectedly on the other platforms, it would be a good change that the file should be built depending on its own specific configuration rather than just on generic RESET_CONTROLLER one. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-26clk: mediatek: Fix all warnings for missing struct clk_onecell_dataSean Wang
Even though the header file linux/clk-provider.h is already being properly included in clk-mtk.h, the definition of struct clk_onecell_data still must depend on CONFIG_COMMON_CLK defined and thus it's possible that below build warnings occur when CONFIG_COMMON_CLK is not being selected. Therefore, these functions which need struct clk_onecell_data without declaring that structure first requires simply declaring that this struct exists prior to referencing it in clk-mtk.h Changes from v1->v2: enhance v1 based on two useful solutions Jean Delvare kindly suggested. All warnings (new ones prefixed by >>): In file included from drivers/clk/mediatek/reset.c:22:0: >>drivers/clk/mediatek/clk-mtk.h:44:19: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration int num, struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:63:19: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration int num, struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:145:10: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:164:11: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:190:12: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: kbuild-all@01.org Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Jean Delvare <jdelvare@suse.de> Cc: linux-clk@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: mediatek: group drivers under indpendent menuSean Wang
Getting much MediaTek clock driver have been added to CCF, so it's better adding the cleanup for grouping drivers under the independent menu to simplify configuration selection. In addition, really trivial fixups for typos are added in the same patch. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02clk: mediatek: add clock support for MT7622 SoCSean Wang
Add all supported clocks exported from every susbystem found on MT7622 SoC such as topckgen, apmixedsys, infracfg, pericfg , pciessys, ssusbsys, ethsys and audsys. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: add the option for determining PLL source clockChen Zhong
Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: mark mtk_infrasys_init_early __initArnd Bergmann
On gcc-4.6, we get a harmless link-time warning: WARNING: vmlinux.o(.text.unlikely+0x196a0): Section mismatch in reference from the function mtk_infrasys_init_early() to the function .init.text:mtk_clk_register_cpumuxes() The function mtk_infrasys_init_early() references the function __init mtk_clk_register_cpumuxes(). This is often because mtk_infrasys_init_early lacks a __init annotation or the annotation of mtk_clk_register_cpumuxes is wrong. Newer compilers inline this function so they don't warn, but marking it __init is the right solution for all versions. Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: Add MT2712 clock supportweiyi.lu@mediatek.com
Add MT2712 clock support, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> [sboyd@codeaurora.org: Static on top_clk_data] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-21clk: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-17clk: mediatek: fixed static checker warning in clk_cpumux_get_parent callSean Wang
Fixed the signedness bug returning '(-22)' on the return type as u8 with removing the sanity checker in clk_cpumux_get_parent() since clk_cpumux_set_parent() always ensures validity in clk_cpumux_get_parent() got called. Fixes: 1e17de9049da ("clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: mediatek: export cpu multiplexer clock for MT8173 SoCsSean Wang
The patch enables CPU multiplexer clock on MT8173 SoC which fixes up cpufreq driver fails at acquiring intermediate clock source when driver probe is called. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCsSean Wang
The patch enables CPU multiplexer clock on MT2701/MT7623 SoC which fixes up cpufreq driver fails at acquiring intermediate clock source when driver probe is called. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't workSean Wang
This patch adds CPU multiplexer clocks which are essential for Mediatek cpufreq driver. It would use the CPU clock multiplexer to switch to the intermediate clock source temporarily and then wait for the primary clock changing getting stable. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-21clk: mediatek: add mt2701 ethernet resetJohn Crispin
The ethernet clock core has a reset register that is currently not exposed to the user. Fix this by adding the missing registration code. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-19clk: mediatek: add clk support for MT6797Kevin-CW Chen
Add MT6797 clock support, include topckgen, apmixedsys, infracfg and subsystem clocks Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com> Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26clk: mediatek: Fix MT8135 dependenciesJean Delvare
The MT8135 is a 32-bit SoC, so only propose it on ARM architecture, not ARM64. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 234d511d8c15 ("clk: mediatek: Add hardware dependency") Cc: Andreas Färber <afaerber@suse.de> Acked-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26clk: mediatek: Fix MT2701 dependenciesJean Delvare
If I say "no" to "Clock driver for Mediatek MT2701", I don't want to be asked individually about each sub-driver. No means no. Additionally, this driver shouldn't be proposed at all on non-mediatek builds, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Cc: Shunli Wang <shunli.wang@mediatek.com> Cc: Erin Lo <erin.lo@mediatek.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08reset: mediatek: Add MT2701 reset driverShunli Wang
In infrasys and perifsys, there are many reset control bits for kinds of modules. These bits are used as actual reset controllers to be registered into kernel's generic reset controller framework. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08clk: mediatek: Add MT2701 clock supportShunli Wang
Add MT2701 clock support, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mediatek: Add hardware dependencyJean Delvare
Only propose the mediatek clock drivers on this platform, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Shunli Wang <shunli.wang@mediatek.com> Cc: James Liao <jamesjj.liao@mediatek.com> Cc: Erin Lo <erin.lo@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-21clk: mediatek: clk-mt8173: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping if init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19clk: mediatek: Refine the makefile to support multiple clock driversJames Liao
Add a Kconfig to define clock configuration for each SoC, and modify the Makefile to build drivers that only selected in config. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-18clk: mediatek: remove __init from clk registration functionsJames Liao
Remove __init from functions that will be used by init functions that support probe deferral. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06clk: mediatek: remove hdmitx_dig_cts from TOP clocksPhilipp Zabel
The hdmitx_dig_cts clock signal is not a child of tvdpll_445p5m, but is routed out of the HDMI PHY module. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06clk: mediatek: Add hdmi_ref HDMI PHY PLL reference clock outputPhilipp Zabel
The configurable hdmi_ref output of the PLL block is derived from the tvdpll_594m clock signal via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06clk: mediatek: make dpi0_sel propagate rate changesPhilipp Zabel
This mux is supposed to select a fitting divider after the PLL is already set to the correct rate. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-29clk: mediatek: Make reset_control_ops constPhilipp Zabel
The mtk_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02clk: mediatek: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now. Remove usage of the flag. Acked-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: mediatek: Fix memory leak on clock init failJames Liao
mtk_clk_register_composite() may leak memory due to some error handling path don't free all allocated memory. This patch free all pointers that may allocate memory before error return. And it's safe because kfree() can handle NULL pointers. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: move the common clock's to_clk_*(_hw) macros to clk-provider.hGeliang Tang
to_clk_*(_hw) macros have been repeatedly defined in many places. This patch moves all the to_clk_*(_hw) definitions in the common clock framework to public header clk-provider.h, and drop the local definitions. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: mediatek: Add USB clock support in MT8173 APMIXEDSYSJames Liao
Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock is needed by USB 3.0. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Add subsystem clocks of MT8173James Liao
Most multimedia subsystem clocks will be accessed by multiple drivers, so it's a better way to manage these clocks in CCF. This patch adds clock support for MM, IMG, VDEC, VENC and VENC_LT subsystems. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Fix rate and dependency of MT8173 clocksJames Liao
Remove the dependency from clk_null, and give all root clocks a typical rate, include clkph_mck_o, usb_syspll_125m and hdmitx_dig_cts. dpi_ck was removed due to no clock reference to it. Replace parent clock of infra_cpum with cpum_ck, which is an external clock and can be defined in the device tree. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Add fixed clocks support for Mediatek SoC.James Liao
This patch adds fixed clocks support by using CCF fixed-rate clock implementation. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Add __initdata and __init for data and functionsJames Liao
Add __init for clock registration functions, and add __initdata for mtk_gate_regs initial structures. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Remove unused code from MT8173.James Liao
Remove unused header files from MT8173, and remove unused keywords from function declaration. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: Removed unused dpi_ck clock from MT8173James Liao
The dpi_ck clock can be removed because it not actually used in topckgen and subsystems. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01clk: mediatek: add 13mhz clock for MT8173Joe.C
Add 13mhz clock used by GPT timer in infracfg. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-28clk: mediatek: Add MT8173 MMPLL change rate supportJames Liao
MT8173 MMPLL frequency settings are different from common PLLs. It needs different post divider settings for some ranges of frequency. This patch add support for MT8173 MMPLL frequency setting by adding div-rate table to lookup suitable post divider setting under a specified frequency. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>