summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2022-09-28clk: imx93: drop of_match_ptrPeng Fan
There is build warning when CONFIG_OF is not selected. >> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match' >> defined but not used [-Wunused-const-variable=] 324 | static const struct of_device_id imx93_clk_of_match[] = { | ^~~~~~~~~~~~~~~~~~ The driver only support DT table, no sense to use of_match_ptr. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28clk: iproc: Do not rely on node name for correct PLL setupFlorian Fainelli
After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block description") a warning from clk-iproc-pll.c was generated due to a duplicate PLL name as well as the console stopped working. Upon closer inspection it became clear that iproc_pll_clk_setup() used the Device Tree node unit name as an unique identifier as well as a parent name to parent all clocks under the PLL. BCM5301X was the first platform on which that got noticed because of the DT node unit name renaming but the same assumptions hold true for any user of the iproc_pll_clk_setup() function. The first 'clock-output-names' property is always guaranteed to be unique as well as providing the actual desired PLL clock name, so we utilize that to register the PLL and as a parent name of all children clock. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28clk: sunxi-ng: h6: Fix default PLL GPU rateJernej Skrabec
In commit 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS") divider M0 was forced to be 1 in order to support DFS. However, that left N as it is, at high value of 36. On boards without devfreq enabled (all of them in kernel 6.0), this effectively sets GPU frequency to 864 MHz. This is about 100 MHz above maximum supported frequency. In order to fix this, let's set N to 18 (register value 17). That way default frequency of 432 MHz is preserved. Fixes: 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220928200122.3963509-1-jernej.skrabec@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocksHan Xu
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28Merge tag 'clk-microchip-fixes-6.0' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes Pull Microchip clock fixes for Polarfire SoCs: - fix panic at boot in clock initialization when building with clang-15 - make RTC's AHB clock critical as rtc will stop if the AHB interface clock is disabled * tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation
2022-09-14clk: microchip: mpfs: make the rtc's ahb clock criticalConor Dooley
The onboard RTC's AHB bus clock must be kept running as the RTC will stop & lose track of time if the AHB interface clock is disabled. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-3-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: fix clk_cfg array bounds violationConor Dooley
There is an array bounds violation present during clock registration, triggered by current code by only specific toolchains. This seems to fail gracefully in v6.0-rc1, using a toolchain build from the riscv- gnu-toolchain repo and with clang-15, and life carries on. While converting the driver to use standard clock structs/ops, kernel panics were seen during boot when built with clang-15: [ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1 [ 0.591520] Oops [#1] [ 0.594045] Modules linked in: [ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1 [ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) [ 0.613012] epc : __clk_register+0x4a6/0x85c [ 0.617759] ra : __clk_register+0x49e/0x85c [ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720 [ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800 [ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0 [ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000 [ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006 [ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028 [ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100 [ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008 [ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007 [ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0 [ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d [ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa [ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244 In v6.0-rc1 and later, this issue is visible without the follow on patches doing the conversion using toolchains provided by our Yocto meta layer too. It fails on "clk_periph_timer" - which uses a different parent, that it tries to find using the macro: \#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw) If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw which is well beyond the end of the array. Amazingly, builds with GCC 11.1 see no problem here, booting correctly and hooking the parent up etc. Builds with clang-15 do not, with the above panic. Change the macro to use specific offsets depending on the parent rather than the dt-binding's clock IDs. Fixes: 1c6a7ea32b8c ("clk: microchip: mpfs: add RTCREF clock control") CC: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
2022-08-31clk: ingenic-tcu: Properly enable registers before accessing timersAidan MacDonald
Access to registers is guarded by ingenic_tcu_{enable,disable}_regs() so the stop bit can be cleared before accessing a timer channel, but those functions did not clear the stop bit on SoCs with a global TCU clock gate. Testing on the X1000 has revealed that the stop bits must be cleared _and_ the global TCU clock must be ungated to access timer registers. This appears to be the norm on Ingenic SoCs, and is specified in the documentation for the X1000 and numerous JZ47xx SoCs. If the stop bit isn't cleared, register writes don't take effect and the system can be left in a broken state, eg. the watchdog timer may not run. The bug probably went unnoticed because stop bits are zeroed when the SoC is reset, and the kernel does not set them unless a timer gets disabled at runtime. However, it is possible that a bootloader or a previous kernel (if using kexec) leaves the stop bits set and we should not rely on them being cleared. Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always clear the stop bit, regardless of the presence of a global TCU gate. Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Paul Cercueil <paul@crapouillou.net> Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks") Cc: stable@vger.kernel.org Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"Stephen Boyd
This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander reports that it causes boot failures on i.MX8M Plus based boards (specifically imx8mp-tqma8mpql-mba8mpxl.dts). Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Chen-Yu Tsai <wenst@chromium.org> Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops") Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org
2022-08-23clk: bcm: rpi: Show clock id limit in error caseStefan Wahren
The clock id limit will be extended in the future, so it would be helpful to see the actual clock id limit in case the firmware response has been rejected. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220713154953.3336-4-stefan.wahren@i2se.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-23clk: bcm: rpi: Add missing newlineStefan Wahren
Some log messages lacks the final newline. So add them. Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220713154953.3336-3-stefan.wahren@i2se.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-23clk: bcm: rpi: Prevent out-of-bounds accessStefan Wahren
The while loop in raspberrypi_discover_clocks() relies on the assumption that the id of the last clock element is zero. Because this data comes from the Videocore firmware and it doesn't guarantuee such a behavior this could lead to out-of-bounds access. So fix this by providing a sentinel element. Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks") Link: https://github.com/raspberrypi/firmware/issues/1688 Suggested-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220713154953.3336-2-stefan.wahren@i2se.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-22clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rateStefan Wahren
The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate hook) can fail to get the clock rate from the firmware. In this case we cannot return a signed error value, which would be casted to unsigned long. Fix this by returning 0 instead. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com Fixes: 4e85e535e6cc ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-22clk: core: Fix runtime PM sequence in clk_core_unprepare()Chen-Yu Tsai
In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"), the commit message mentioned that pm_runtime_put_sync() would be done at the end of clk_core_unprepare(). This mirrors the operations in clk_core_prepare() in the opposite order. However, the actual code that was added wasn't in the order the commit message described. Move clk_pm_runtime_put() to the end of clk_core_unprepare() so that it is in the correct order. Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-22clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate opsChen-Yu Tsai
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-19clk: ti: Fix missing of_node_get() ti_find_clock_provider()Tony Lindgren
For ti_find_clock_provider() we want to return the np with refcount incremented. However we are missing of_node_get() for the clock-output-names case that causes refcount warnings. Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220621091118.33930-1-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-04Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire clks and prepare and enable them at the same time. This also comes with devm support so that drivers can make a single call to get and prepare and enable the clk and have that all undone when their driver is removed. Many folks have requested this feature over the years, but we've had disagreements about how to implement it and if it was worthwhile to encourage drivers to use such an API. Now it's here, so let's see how it goes. I hope that by introducing this API we can identify drivers that would benefit from further consolidation of clk API usage, possibly by moving such logic to the bus layer and out of drivers altogether. Outside of that major API update, we have the usual collection of driver updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time around. Then we have the long tail of non-critical fixes and minor feature additions to various clk drivers. And finally more clk provider migration to struct clk_parent_data, reducing boot times in the process. Summary: Core: - devm helpers for clk_get() + clk_prepare() and clk_enable() New Drivers: - Support for the camera clock controller in Qualcomm SM8450 and the display and gpu clock controllers in Qualcomm SM8350 - Add support for the Renesas RZ/Five SoC Updates: - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074 - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916 GCC driver - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe GDSCs - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are migrated to use clk_parent_data - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and SM8250 - Qualcomm MSM8916 gains more possible frequencies for its GP clocks. - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the design in IPQ8074 to allow the GCC driver to probe earlier. - The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago - Qualcomm GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously - Correct adc1, nic_media and edma1's parents for NXP i.MX93 - rdiv, mfd values, the return rate in recalc_rate and add more frequencies in the table for fracn-gppll on i.MX - Remove Allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - deduplicate Allwinner ccu_clks arrays - Allwinner H6 GPU DFS support - Adjust Allwinner Kconfig to limit choice - Fix initconst confusion on Renesas R-Car Gen4 - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L - Add PFC and WDT clocks and resets on Renesas RZ/V2M - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on Renesas R-Car S4-8" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits) clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC ...
2022-08-04Merge tag 'platform-drivers-x86-v6.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - Microsoft Surface: - SSAM hot unplug support - Surface Pro 8 keyboard cover support - Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio - thinkpad_acpi: - AMD Automatice Mode Transitions (AMT) support - Mellanox: - Vulcan chassis COMe NVSwitch management support - XH3000 support - New generic/shared Intel P2SB (Primary to Sideband) support - Lots of small cleanups - Various small bugfixes - Various new hardware ids / quirks additions * tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits) platform/x86/intel/vsec: Fix wrong type for local status variables platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency platform/x86: pmc_atom: Fix comment typo platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4 platform/olpc: Fix uninitialized data in debugfs write platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource() tools/power/x86/intel-speed-select: Remove unneeded semicolon tools/power/x86/intel-speed-select: Fix off by one check platform/surface: tabletsw: Fix __le32 integer access Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces Documentation/ABI: mlxreg-io: Fix contact info platform/mellanox: mlxreg-io: Add locking for io operations platform/x86: mlx-platform: Add COME board revision register platform/x86: mlx-platform: Add support for new system XH3000 platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis platform/x86: mlx-platform: Add support for systems equipped with two ASICs platform/x86: mlx-platform: Add cosmetic changes for alignment platform/x86: mlx-platform: Make activation of some drivers conditional ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-02Merge tag 'linux-kselftest-kunit-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and an important feature to discourage running KUnit tests on production systems. Running tests on a production system could leave the system in a bad state. Summary: - Add a new taint type, TAINT_TEST to signal that a test has been run. This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc) - Several documentation and tool enhancements and fixes" * tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: KUnit: Fix example with compilation error Documentation: kunit: Add CLI args for kunit_tool kcsan: test: Add a .kunitconfig to run KCSAN tests kunit: executor: Fix a memory leak on failure in kunit_filter_tests clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro thunderbolt: test: Use kunit_test_suite() macro kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites kunit: unify module and builtin suite definitions selftest: Taint kernel when test module loaded module: panic: Taint the kernel when selftest modules load Documentation: kunit: fix example run_kunit func to allow spaces in args Documentation: kunit: Cleanup run_wrapper, fix x-ref kunit: test.h: fix a kernel-doc markup kunit: tool: Enable virtio/PCI by default on UML kunit: tool: make --kunitconfig repeatable, blindly concat kunit: add coverage_uml.config to enable GCOV on UML kunit: tool: refactor internal kconfig handling, allow overriding kunit: tool: introduce --qemu_args ...
2022-08-02Merge branch 'clk-allwinner' into clk-nextStephen Boyd
* clk-allwinner: clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS clk: sunxi: Do not select the PRCM MFD clk: sunxi: Limit legacy clocks to 32-bit ARM clk: sunxi-ng: Deduplicate ccu_clks arrays
2022-08-02Merge branches 'clk-renesas', 'clk-spreadtrum', 'clk-imx' and 'clk-qcom' ↵Stephen Boyd
into clk-next * clk-renesas: (22 commits) clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_config clk: renesas: r9a07g043: Add support for RZ/Five SoC dt-bindings: clock: r9a07g043-cpg: Add Renesas RZ/Five CPG Clock and Reset Definitions clk: renesas: r8a779f0: Add HSCIF clocks clk: renesas: r8a779f0: Add PCIe clocks clk: renesas: r8a779f0: Add Z0 and Z1 clock support dt-bindings: clock: renesas,rzg2l: Simplify header file references clk: renesas: rza1: Remove struct rz_cpg clk: renesas: r8a7779: Remove struct r8a7779_cpg clk: renesas: r8a7778: Remove struct r8a7778_cpg clk: renesas: sh73a0: Remove sh73a0_cpg.reg clk: renesas: r8a7740: Remove r8a7740_cpg.reg clk: renesas: r8a73a4: Remove r8a73a4_cpg.reg clk: renesas: r8a779f0: Add SDHI0 clock clk: renesas: r8a779f0: Add thermal clock clk: renesas: rzg2l: Fix reset status function clk: renesas: r9a06g032: Fix UART clkgrp bitsel clk: renesas: r9a06g032: Drop some unused fields clk: renesas: r9a09g011: Add WDT clock and reset entries clk: renesas: r9a09g011: Add PFC clock and reset entries ... * clk-spreadtrum: clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller * clk-imx: clk: imx: clk-fracn-gppll: Add more freq config for video pll clk: imx: clk-fracn-gppll: correct rdiv clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate() clk: imx: clk-fracn-gppll: fix mfd value clk: imx93: Correct the edma1's parent clock clk: imx93: correct nic_media parent clk: imx93: use adc_root as the parent clock of adc1 * clk-qcom: (62 commits) clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC clk: qcom: add support for SM8350 GPUCC clk: qcom: add camera clock controller driver for SM8450 SoC clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description ...
2022-08-02Merge branches 'clk-basic', 'clk-mtk', 'clk-devm-enable' and 'clk-ti-dt' ↵Stephen Boyd
into clk-next - Remove allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - devm helpers for clk_get() + clk_prepare() and clk_enable() * clk-basic: clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() dt-bindings: clock: fixed-factor: Drop Allwinner A10 compatible clk: fixed: Remove Allwinner A10 special-case logic * clk-mtk: clk: mediatek: reset: Add infra_ao reset support for MT8186 dt-bindings: arm: mediatek: Add #reset-cells property for MT8186 dt-bindings: reset: mediatek: Add infra_ao reset index for MT8186 clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195 dt-bindings: reset: mediatek: Add infra_ao reset index for MT8192/MT8195 dt-bindings: arm: mediatek: Add #reset-cells property for MT8192/MT8195 clk: mediatek: reset: Add reset support for simple probe clk: mediatek: reset: Add new register reset function with device clk: mediatek: reset: Change return type for clock reset register function clk: mediatek: reset: Support inuput argument index mode clk: mediatek: reset: Support nonsequence base offsets of reset registers clk: mediatek: reset: Revise structure to control reset register clk: mediatek: reset: Merge and revise reset register function clk: mediatek: reset: Extract common drivers to update function clk: mediatek: reset: Refine and reorder functions in reset.c clk: mediatek: reset: Fix written reset bit offset clk: mediatek: reset: Add reset.h clk: mediatek: Delete MT8192 msdc gate dt-bindings: ARM: Mediatek: Remove msdc binding of MT8192 clock * clk-devm-enable: clk: Remove never used devm_clk_*unregister() clk: Fix pointer casting to prevent oops in devm_clk_release() clk: meson: axg-audio: Don't duplicate devm_clk_get_enabled() clk: Provide new devm_clk helpers for prepared and enabled clocks clk: generalize devm_clk_get() a bit clk: Improve documentation for devm_clk_get() and its optional variant * clk-ti-dt: clk: ti: Stop using legacy clkctrl names for omap4 and 5
2022-08-02Merge tag 'arm-drivers-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ...
2022-07-29clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()Marijn Suijten
Add the devres and non-devres variant of clk_hw_register_fixed_factor_parent_hw() for registering a fixed factor clock with clk_hw parent pointer instead of parent name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20220629225331.357308-4-marijn.suijten@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-27clk: sunxi-ng: Fix H6 RTC clock definitionJernej Skrabec
While RTC clock was added in H616 ccu_common list, it was not in H6 list. That caused invalid pointer dereference like this: Unable to handle kernel NULL pointer dereference at virtual address 000000000000020c Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004d574000 [000000000000020c] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 339 Comm: cat Tainted: G B 5.18.0-rc1+ #1352 Hardware name: Tanix TX6 (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ccu_gate_is_enabled+0x48/0x74 lr : ccu_gate_is_enabled+0x40/0x74 sp : ffff80000c0b76d0 x29: ffff80000c0b76d0 x28: 00000000016e3600 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000002 x24: ffff00000952fe08 x23: ffff800009611400 x22: ffff00000952fe79 x21: 0000000000000000 x20: 0000000000000001 x19: ffff80000aad6f08 x18: 0000000000000000 x17: 2d2d2d2d2d2d2d2d x16: 2d2d2d2d2d2d2d2d x15: 2d2d2d2d2d2d2d2d x14: 0000000000000000 x13: 00000000f2f2f2f2 x12: ffff700001816e89 x11: 1ffff00001816e88 x10: ffff700001816e88 x9 : dfff800000000000 x8 : ffff80000c0b7447 x7 : 0000000000000001 x6 : ffff700001816e88 x5 : ffff80000c0b7440 x4 : 0000000000000001 x3 : ffff800008935c50 x2 : dfff800000000000 x1 : 0000000000000000 x0 : 000000000000020c Call trace: ccu_gate_is_enabled+0x48/0x74 clk_core_is_enabled+0x7c/0x1c0 clk_summary_show_subtree+0x1dc/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show+0x90/0xdc seq_read_iter+0x248/0x6d4 seq_read+0x17c/0x1fc full_proxy_read+0x90/0xf0 vfs_read+0xdc/0x28c ksys_read+0xc8/0x174 __arm64_sys_read+0x44/0x5c invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x38/0xa0 el0_svc+0x68/0x160 el0t_64_sync_handler+0x10c/0x140 el0t_64_sync+0x18c/0x190 Code: d1006260 97e5c981 785e8260 8b0002a0 (b9400000) ---[ end trace 0000000000000000 ]--- Fix that by adding rtc clock to H6 ccu_common list too. Fixes: 38d321b61bda ("clk: sunxi-ng: h6-r: Add RTC gate clock") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220719183725.2605141-1-jernej.skrabec@gmail.com Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-19clk: lan966x: Fix the lan966x clock gate register addressHerve Codina
The register address used for the clock gate register is the base register address coming from first reg map (ie. the generic clock registers) instead of the second reg map defining the clock gate register. Use the correct clock gate register address. Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-18clk: qcom: gcc-msm8994: use parent_hws for gpll0/4Dmitry Baryshkov
Use parent_hws for two remaining clocks in gcc-msm8994 that used parent_names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220620080505.1573948-1-dmitry.baryshkov@linaro.org
2022-07-18clk: qcom: clk-rpm: convert to parent_data APIChristian Marangi
Convert clk-rpm driver to parent_data API. We keep the old pxo/cxo_board parent naming to keep compatibility with old DT and we use the new pxo/cxo for new implementation where these clock are defined in DTS. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220706225321.26215-4-ansuelsmth@gmail.com
2022-07-18clk: qcom: gcc-msm8939: Add missing USB HS system clock frequenciesBryan O'Donoghue
The shipped qcom driver defines: static struct clk_freq_tbl ftbl_gcc_usb_hs_system_clk[] = { F( 57140000, gpll0_out_main, 14, 0, 0), F( 80000000, gpll0_out_main, 10, 0, 0), F( 100000000, gpll0_out_main, 8, 0, 0), F_END }; In the upstream code we omit 57.14 MHz and 100 MHz. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-7-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequenciesBryan O'Donoghue
Again the msm8936/msm8939 supports a wider range of operating frequencies to the antecedent msm8916 from which the msm8939.c driver is derived. static struct clk_freq_tbl ftbl_gcc_mdss_mdp_clk[] = { F( 50000000, gpll0_out_aux, 16, 0, 0), F( 80000000, gpll0_out_aux, 10, 0, 0), F( 100000000, gpll0_out_aux, 8, 0, 0), F( 145500000, gpll0_out_aux, 5.5, 0, 0), F( 153600000, gpll1_out_main, 4, 0, 0), F( 160000000, gpll0_out_aux, 5, 0, 0), F( 177780000, gpll0_out_aux, 4.5, 0, 0), F( 200000000, gpll0_out_aux, 4, 0, 0), F( 266670000, gpll0_out_aux, 3, 0, 0), F( 307200000, gpll1_out_main, 2, 0, 0), F( 366670000, gpll3_out_aux, 3, 0, 0), F_END }; We are missing 145.5 MHz and 153.6 MHz. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-6-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequenciesBryan O'Donoghue
Reviewing the qcom msm8936.c clock frequency tables we see static struct clk_freq_tbl ftbl_gcc_camss_cpp_clk[] = { F( 160000000, gpll0_out_main, 5, 0, 0), F( 200000000, gpll0_out_main, 4, 0, 0), F( 228570000, gpll0_out_main, 3.5, 0, 0), F( 266670000, gpll0_out_main, 3, 0, 0), F( 320000000, gpll0_out_main, 2.5, 0, 0), F( 465000000, gpll2_out_main, 2, 0, 0), F_END }; which is a super-set of the msm8916 original definitions. Add in the missing frequency definitions now. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-5-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitionsBryan O'Donoghue
The Venus clock frequencies are a copy/paste error from msm8916. Looking at the original clock-gcc-8936.c ftbl_gcc_venus0_vcodec0_clk defines we have: - 133 MHz - 200 MHz - 266 MHz These values are born out by the relevant qualcomm documentation for the msm8936/msm8939 Venus core performance levels. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-4-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clockBryan O'Donoghue
Standard CCI bus clock clocks are 19.2 MHz and 37.5 MHz. We already define the 19.2 MHz but are missing the 37.5 MHz. See qcom kernel drivers/clk/qcom/clock-gcc-8936.c::ftbl_gcc_camss_cci_clk[] Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-3-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clkBryan O'Donoghue
Adding a new item to this frequency table I see the existing indentation is incorrect. Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712125922.3461675-2-bryan.odonoghue@linaro.org
2022-07-18clk: qcom: gdsc: Bump parent usage count when GDSC is found enabledBjorn Andersson
When a GDSC is found to be enabled at boot the pm_runtime state will be unbalanced as the GDSC is later turned off. Fix this by increasing the usage counter on the power-domain, in line with how we handled the regulator state. Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220713212818.130277-1-bjorn.andersson@linaro.org
2022-07-18clk: qcom: Drop mmcx gdsc supply for dispcc and videoccAbel Vesa
Both dispcc and videocc use mmcx power domain now. Lets drop the supply mmcx from every gdsc. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 266e5cf39a0f ("arm64: dts: qcom: sm8250: remove mmcx regulator") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220713143200.3686765-1-abel.vesa@linaro.org
2022-07-16clk: qcom: fix build error initializer element is not constantRen Zhijie
CONFIG_CC_VERSION_TEXT="x86_64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0" make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this: drivers/clk/qcom/gpucc-sm8350.c:111:2: error: initializer element is not constant gpu_cc_parent, ^~~~~~~~~~~~~ drivers/clk/qcom/gpucc-sm8350.c:111:2: note: (near initialization for ‘gpu_cc_parent_data_0[0]’) drivers/clk/qcom/gpucc-sm8350.c:126:2: error: initializer element is not constant gpu_cc_parent, ^~~~~~~~~~~~~ drivers/clk/qcom/gpucc-sm8350.c:126:2: note: (near initialization for ‘gpu_cc_parent_data_1[0]’) make[3]: *** [drivers/clk/qcom/gpucc-sm8350.o] Error 1 It seems that nested constant initializer is not supported in GCC 7.4.0. For portability resons, we should fix it. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 160758b05ab1 ("clk: qcom: add support for SM8350 GPUCC") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220714121144.71062-1-renzhijie2@huawei.com
2022-07-14clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfigDaniel Latypov
CONFIG_UML_PCI_OVER_VIRTIO=y is needed to enable CONFIG_PCI=y on UML. However, this causes test failures when running the clk tests, i.e. $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk A snippet of the particular error is: > ok 1 - clk_gate_test_parent_rate > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 45 at lib/logic_iomem.c:141 __raw_readl+0x9f/0xd0 This is triggered by this cast in the test: 143 ctx->fake_mem = (void __force __iomem *)&ctx->fake_reg; this seems to work except when logic iomem is enabled, i.e. CONFIG_INDIRECT_IOMEM=y. As a short-term fix, explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in drivers/clk/.kunitconfig so we can enable it for everyone else by default in kunit.py. The long-term fix probably requires something more complicated, like #ifdef CONFIG_INDIRECT_IOMEM logic_iomem_add_region(...); #endif Signed-off-by: Daniel Latypov <dlatypov@google.com> Reported-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: David Gow <davidgow@google.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-10clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make CLK_BCM_63XX depending and setting default on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-08clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFSRoman Stratiienko
Using simple bash script it was discovered that not all CCU registers can be safely used for DFS, e.g.: while true do devmem 0x3001030 4 0xb0003e02 devmem 0x3001030 4 0xb0001e02 done Script above changes the GPU_PLL multiplier register value. While the script is running, the user should interact with the user interface. Using this method the following results were obtained: | Register | Name | Bits | Values | Result | | -- | -- | -- | -- | -- | | 0x3001030 | GPU_PLL.MULT | 15..8 | 20-62 | OK | | 0x3001030 | GPU_PLL.INDIV | 1 | 0-1 | OK | | 0x3001030 | GPU_PLL.OUTDIV | 0 | 0-1 | FAIL | | 0x3001670 | GPU_CLK.DIV | 3..0 | ANY | FAIL | DVFS started to work seamlessly once dividers which caused the glitches were set to fixed values. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220705075226.359475-1-r.stratiienko@gmail.com
2022-07-06clk: qcom: add support for SM8350 DISPCCJonathan Marek
Add support to the SM8350 display clock controller by extending the SM8250 display clock controller, which is almost identical but has some minor differences. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220706154337.2026269-5-robert.foss@linaro.org
2022-07-06clk: qcom: add support for SM8350 GPUCCRobert Foss
The GPUCC manages the clocks for the Adreno GPU found on the sm8350 SoCs. Signed-off-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220706154337.2026269-3-robert.foss@linaro.org
2022-07-06clk: qcom: add camera clock controller driver for SM8450 SoCVladimir Zapolskiy
Add camera clock controller driver found on Qualcomm SM8450 SoC. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062744.2757931-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfacesVladimir Zapolskiy
Add and export Rivian EVO PLL configuration and control functions to clock controller drivers, the PLL is used by SM8450 camera clock controller. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062739.2757912-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfacesVladimir Zapolskiy
Add controls for Lucid EVO PLL configuration and export control functions to clock controller drivers, the PLL is used by Qualcomm SM8450 camera and display clock controllers. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062729.2757893-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed codeVladimir Zapolskiy
Unify all exported PLL clock configuration functions and data structures as GPL symbols. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062720.2757874-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure descriptionVladimir Zapolskiy
After merging lucid and trion pll functions in commit 0b01489475c6 ("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid") the function clk_trion_pll_configure() is left with an old description header, which results in a W=2 compile time warning, fix it. Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
2022-07-05clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_configAndi Kleen
A variable pointing to const isn't const itself. It'd have to contain "const" keyword after "*" too. Therefore, cpg_pll_config cannot be put to "rodata". Hence use __initdata instead of __initconst to fix this. Signed-off-by: Andi Kleen <ak@linux.intel.com> [js] more explanatory commit message. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220623083217.26433-2-jslaby@suse.cz Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05clk: renesas: r9a07g043: Add support for RZ/Five SoCLad Prabhakar
Renesas RZ/Five SoC has almost the same clock structure compared to the Renesas RZ/G2UL SoC, re-use the r9a07g043-cpg.c file to add support for RZ/Five SoC. This patch splits up the clocks and reset arrays for RZ/G2UL and RZ/Five SoC using #ifdef CONFIG_ARM64 and #ifdef CONFIG_RISCV checks. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220622181723.13033-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 10:45:17 +0000