summaryrefslogtreecommitdiff
path: root/drivers/clocksource/timer-imx-gpt.c
AgeCommit message (Collapse)Author
2020-02-27clocksource: Replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot <lkp@intel.com> in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2018-12-18clocksource/drivers/imx-gpt: Remove unnecessary irq protectionClément Péron
shutdown and oneshot are already protected against irq interruptions Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/imx-gpt: Add support for ARM64Anson Huang
This patch allows building and compile-testing the i.MX GPT driver also for ARM64. The delay_timer is only supported on ARMv7. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Remove outdated file pathFabio Estevam
imx gpt timer driver has been moved from arch/arm/mach-imx to drivers/clocksource/ a long time ago, so remove the reference to the old file path. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLAREDaniel Lezcano
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-28clocksources: Switch back to the clksrc tableDaniel Lezcano
All the clocksource drivers's init function are now converted to return an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the clksrc-of table. Let's convert back the names: - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE - clksrc-of-ret => clksrc-of Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> For exynos_mct and samsung_pwm_timer: Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> For arch/arc: Acked-by: Vineet Gupta <vgupta@synopsys.com> For mediatek driver: Acked-by: Matthias Brugger <matthias.bgg@gmail.com> For the Rockchip-part Acked-by: Heiko Stuebner <heiko@sntech.de> For STi : Acked-by: Patrice Chotard <patrice.chotard@st.com> For the mps2-timer.c and versatile.c changes: Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> For the OXNAS part : Acked-by: Neil Armstrong <narmstrong@baylibre.com> For LPC32xx driver: Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> For Broadcom Kona timer change: Acked-by: Ray Jui <ray.jui@broadcom.com> For Sun4i and Sun5i: Acked-by: Chen-Yu Tsai <wens@csie.org> For Meson6: Acked-by: Carlo Caione <carlo@caione.org> For Keystone: Acked-by: Santosh Shilimkar <ssantosh@kernel.org> For NPS: Acked-by: Noam Camus <noamca@mellanox.com> For bcm2835: Acked-by: Eric Anholt <eric@anholt.net>
2016-06-28clocksource/drivers/imx-gpt: Convert init function to return errorDaniel Lezcano
The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-15clocksource/drivers/imx: Allow timer irq affinity changeLucas Stach
Allow the timer core to change the smp affinity of the broadcast timer irq by setting CLOCK_EVT_FEAT_DYNIRQ flag. For this to work the timer core needs to be told about the used irq. This reduces interrupt pressure and wakeups on CPU0 as well as vastly reducing the number of timer broadcast IPIs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Rather large, but nothing exiting: - new range check for settimeofday() to prevent that boot time becomes negative. - fix for file time rounding - a few simplifications of the hrtimer code - fix for the proc/timerlist code so the output of clock realtime timers is accurate - more y2038 work - tree wide conversion of clockevent drivers to the new callbacks" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits) hrtimer: Handle failure of tick_init_highres() gracefully hrtimer: Unconfuse switch_hrtimer_base() a bit hrtimer: Simplify get_target_base() by returning current base hrtimer: Drop return code of hrtimer_switch_to_hres() time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64() time: Introduce current_kernel_time64() time: Introduce struct itimerspec64 time: Add the common weak version of update_persistent_clock() time: Always make sure wall_to_monotonic isn't positive time: Fix nanosecond file time rounding in timespec_trunc() timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers cris/time: Migrate to new 'set-state' interface kernel: broadcast-hrtimer: Migrate to new 'set-state' interface xtensa/time: Migrate to new 'set-state' interface unicore/time: Migrate to new 'set-state' interface um/time: Migrate to new 'set-state' interface sparc/time: Migrate to new 'set-state' interface sh/localtimer: Migrate to new 'set-state' interface score/time: Migrate to new 'set-state' interface s390/time: Migrate to new 'set-state' interface ...
2015-08-20clocksource/imx: Fix boot with non-DT systemsGuenter Roeck
Commit 6dd747825b20 ("ARM: imx: move timer resources into a structure") moved initialization parameters into a data structure, but neglected to set the irq field in that data structure for non-DT boots. This causes the system to hang if a non-DT boot is attempted. Fixes: 6dd747825b20 ("ARM: imx: move timer resources into a structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-10clockevents/drivers/timer-imx-gpt: Migrate to new 'set-state' interfaceViresh Kumar
Migrate timer-imx-gpt driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'imx_timer.cem': It was caching the last state of the clockevent device. The same behavior can be achieved by using clockevents state helpers. These helpers are only required for oneshot mode as shutdown/resume wouldn't be done twice by the core. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers. The prints are modified to print the set-state functions name now to debug the driver. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-07-07clocksource/imx: Define clocksource for mx27Philippe Reynes
The rework of the imx clocksource driver missed to add an entry for imx27 which results in a boot failure on those machines. Add the proper CLOCKSOURCE_OF_DECLARE() entry for imx27 and map it to the imx21 init. Fixes: bef11c881ba5 'ARM: imx: initialize gpt device type for DT boot' Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: daniel.lezcano@linaro.org Cc: fabio.estevam@freescale.com Cc: shawnguo@kernel.org Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1435439504-406-1-git-send-email-tremyfr@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-03clocksource: timer-imx-gpt: remove include of <asm/mach/time.h>Shawn Guo
The include of <asm/mach/time.h> is not needed at all, and causes build error in some cases. Remove it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-03ARM: imx: move timer driver into drivers/clocksourceShawn Guo
After the cleanup on imx timer driver, now it's ready to be moved into drivers/clocksource/. Let's do it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>