summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2021-09-26dmaengine: xilinx_dma: Set DMA mask for coherent APIsRadhey Shyam Pandey
[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ] The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory. Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]--- Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Harini Katakam <harini.katakam@xilinx.com> Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: ioat: depends on !UMLJohannes Berg
[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: sprd: Add missing MODULE_DEVICE_TABLEZou Wei
[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: depends on !UMLJohannes Berg
[ Upstream commit b2296eeac91555bd13f774efa7ab7d4b12fb71ef ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: clear block on fault flag when clear wqDave Jiang
[ Upstream commit bd2f4ae5e019efcfadd6b491204fd60adf14f4a3 ] The block on fault flag is not cleared when we disable or reset wq. This causes it to remain set if the user does not clear it on the next configuration load. Add clear of flag in dxd_wq_disable_cleanup() routine. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162803023553.3086015.8158952172068868803.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: fix abort status checkDave Jiang
[ Upstream commit b60bb6e2bfc192091b8f792781b83b5e0f9324f6 ] Coverity static analysis of linux-next found issue. The check (status == IDXD_COMP_DESC_ABORT) is always false since status was previously masked with 0x7f and IDXD_COMP_DESC_ABORT is 0xff. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162698465160.3560828.18173186265683415384.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: fix wq slot allocation index checkDave Jiang
[ Upstream commit 673d812d30be67942762bb9e8548abb26a3ba4a7 ] The sbitmap wait and allocate routine checks the index that is returned from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid index. This fixes issue where submission path hangs when WQ size is 1. Fixes: 0705107fcc80 ("dmaengine: idxd: move submission to sbitmap_queue") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: idxd: have command status always setDave Jiang
[ Upstream commit 53499d1fc11267e078557fc68ce943c1eb3b7a37 ] The cached command status is only set when the write back status is is passed in. Move the variable set outside of the check so it is always set. Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support") Reported-by: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162274329740.1822314.3443875665504707588.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmanegine: idxd: cleanup all device related bits after disabling deviceDave Jiang
[ Upstream commit 0dcfe41e9a4ca759ccc87a48e3bb9cc3b08ff1e8 ] The previous state cleanup patch only performed wq state cleanups. This does not go far enough as when device is disabled or reset, the state for groups and engines must also be cleaned up. Add additional state cleanup beyond wq cleanup. Tie those cleanups directly to device disable and reset, and wq disable and reset. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162285154108.2096632.5572805472362321307.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: acpi: Avoid comparison GSI with Linux vIRQAndy Shevchenko
commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream. Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it. Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-18dmaengine: imx-sdma: remove duplicated sdma_load_contextRobin Gong
commit e555a03b112838883fdd8185d613c35d043732f2 upstream. Since sdma_transfer_init() will do sdma_load_context before any sdma transfer, no need once more in sdma_config_channel(). Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Cc: <stable@vger.kernel.org> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Vinod Koul <vkoul@kernel.org> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-18Revert "dmaengine: imx-sdma: refine to load context only once"Robin Gong
commit 8592f02464d52776c5cfae4627c6413b0ae7602d upstream. This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because in spi-imx case, burst length may be changed dynamically. Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Cc: <stable@vger.kernel.org> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-06Merge tag 'dmaengine-fix-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes, notably: - idxd driver fixes for submission race, driver remove sequence, setup sequence for MSIXPERM, array index and updating descriptor vector - usb-dmac, pm reference leak fix - xilinx_dma, read-after-free fix - uniphier-xdmac fix for using atomic readl_poll_timeout_atomic() - of-dma, router_xlate to return - imx-dma, generic dma fix" * tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: imx-dma: configure the generic DMA type to make it work dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state dmaengine: idxd: fix submission race window dmaengine: idxd: fix sequence for pci driver remove() and shutdown() dmaengine: idxd: fix desc->vector that isn't being updated dmaengine: idxd: fix setup sequence for MSIXPERM table dmaengine: idxd: fix array index when int_handles are being used dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe() dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
2021-08-02dmaengine: imx-dma: configure the generic DMA type to make it workJuergen Borleis
Commit dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") changes the method from a "configuration when called" to an "configuration when used". Due to this, only the cyclic DMA type gets configured correctly, while the generic DMA type is left non-configured. Without this additional call, the struct imxdma_channel::word_size member is stuck at DMA_SLAVE_BUSWIDTH_UNDEFINED and imxdma_prep_slave_sg() always returns NULL. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Fixes: dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") Link: https://lore.kernel.org/r/20210729071821.9857-1-jbe@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not ↵Peter Ujfalusi
yet available If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does. The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux opsZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 4f3ceca254e0f ("dmaengine: stm32-dmamux: Add PM Runtime support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-3-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-28dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma opsZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 48bc73ba14bcd ("dmaengine: stm32-dma: Add PM Runtime support") Fixes: 05f8740a0e6fc ("dmaengine: stm32-dma: add suspend/resume power management support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-2-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-27dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic stateKunihiko Hayashi
The function uniphier_xdmac_chan_stop() is only called in atomic state. Should use readl_poll_timeout_atomic() there instead of readl_poll_timeout(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1627364852-28432-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20dmaengine: idxd: fix submission race windowDave Jiang
Konstantin observed that when descriptors are submitted, the descriptor is added to the pending list after the submission. This creates a race window with the slight possibility that the descriptor can complete before it gets added to the pending list and this window would cause the completion handler to miss processing the descriptor. To address the issue, the addition of the descriptor to the pending list must be done before it gets submitted to the hardware. However, submitting to swq with ENQCMDS instruction can cause a failure with the condition of either wq is full or wq is not "active". With the descriptor allocation being the gate to the wq capacity, it is not possible to hit a retry with ENQCMDS submission to the swq. The only possible failure can happen is when wq is no longer "active" due to hw error and therefore we are moving towards taking down the portal. Given this is a rare condition and there's no longer concern over I/O performance, the driver can walk the completion lists in order to retrieve and abort the descriptor. The error path will set the descriptor to aborted status. It will take the work list lock to prevent further processing of worklist. It will do a delete_all on the pending llist to retrieve all descriptors on the pending llist. The delete_all action does not require a lock. It will walk through the acquired llist to find the aborted descriptor while add all remaining descriptors to the work list since it holds the lock. If it does not find the aborted descriptor on the llist, it will walk through the work list. And if it still does not find the descriptor, then it means the interrupt handler has removed the desc from the llist but is pending on the work list lock and will process it once the error path releases the lock. Fixes: eb15e7154fbf ("dmaengine: idxd: add interrupt handle request and release support") Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162628855747.360485.10101925573082466530.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20dmaengine: idxd: fix sequence for pci driver remove() and shutdown()Dave Jiang
->shutdown() call should only be responsible for quiescing the device. Currently it is doing PCI device tear down. This causes issue when things like MMIO mapping is removed while idxd_unregister_devices() will trigger removal of idxd device sub-driver and still initiates MMIO writes to the device. Another issue is with the unregistering of idxd 'struct device', the memory context gets freed. So the teardown calls are accessing freed memory and can cause kernel oops. Move all the teardown bits that doesn't belong in shutdown to ->remove() call. Move unregistering of the idxd conf_dev 'struct device' to after doing all the teardown to free all the memory that's no longer needed. Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20dmaengine: idxd: fix desc->vector that isn't being updatedDave Jiang
Missing update for desc->vector when the wq vector gets updated. This causes the desc->vector to always be at 0. Fixes: da435aedb00a ("dmaengine: idxd: fix array index when int_handles are being used") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162628784374.353761.4736602409627820431.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: mpc512x: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warning (powerpc-randconfig): drivers/dma/mpc512x_dma.c:816:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60ef0750.I8J+C6KAtb0xVOAa%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-14dmaengine: idxd: fix setup sequence for MSIXPERM tableDave Jiang
The MSIX permission table should be programmed BEFORE request_irq() happens. This prevents any possibility of an interrupt happening before the MSIX perm table is setup, however slight. Fixes: 6df0e6c57dfc ("dmaengine: idxd: clear MSIX permission entry on shutdown") Sign-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162456741222.1138073.1298447364671237896.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: idxd: fix array index when int_handles are being usedDave Jiang
The index to the irq vector should be local and has no relation to the assigned interrupt handle. Assign the MSIX interrupt index that is programmed for the descriptor. The interrupt handle only matters when it comes to hardware descriptor programming. Fixes: eb15e7154fbf ("dmaengine: idxd: add interrupt handle request and release support") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162456176939.1121476.3366256009925001897.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()Yu Kuai
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfersAdrian Larumbe
When user calls dmaengine_terminate_sync, the driver will clean up any remaining descriptors for all the pending or active transfers that had previously been submitted. However, this might happen whilst the tasklet is invoking the DMA callback for the last finished transfer, so by the time it returns and takes over the channel's spinlock, the list of completed descriptors it was traversing is no longer valid. This leads to a read-after-free situation. Fix it by signalling whether a user-triggered termination has happened by means of a boolean variable. Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com> Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-13dmaengine: ti: k3-udma: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warning: drivers/dma/ti/k3-udma.c:4951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-13dmaengine: ipu: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warnings (arm64-randconfig): drivers/dma/ipu/ipu_idmac.c:621:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] rivers/dma/ipu/ipu_idmac.c:981:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-05Merge tag 'driver-core-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg KH: "Here is the small set of driver core and debugfs updates for 5.14-rc1. Included in here are: - debugfs api cleanups (touched some drivers) - devres updates - tiny driver core updates and tweaks Nothing major in here at all, and all have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) docs: ABI: testing: sysfs-firmware-memmap: add some memmap types. devres: Enable trace events devres: No need to call remove_nodes() when there none present devres: Use list_for_each_safe_from() in remove_nodes() devres: Make locking straight forward in release_nodes() kernfs: move revalidate to be near lookup drivers/base: Constify static attribute_group structs firmware_loader: remove unneeded 'comma' macro devcoredump: remove contact information driver core: Drop helper devm_platform_ioremap_resource_wc() component: Rename 'dev' to 'parent' component: Drop 'dev' argument to component_match_realloc() device property: Don't check for NULL twice in the loops driver core: auxiliary bus: Fix typo in the docs drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO debugfs: remove return value of debugfs_create_ulong() debugfs: remove return value of debugfs_create_bool() scsi: snic: debugfs: remove local storage of debugfs files b43: don't save dentries for debugfs b43legacy: don't save dentries for debugfs ...
2021-07-05Merge tag 'dmaengine-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "This time around we have a smaller pull request than usual and this includes code removal, so should be good! New drivers/devices - Support for QCOM SM8250 GPI DMA - removal of shdma-of driver and binding Updates: - arm-pl08x yaml binding move - altera-msgdma gained DT support - removal of imx-sdma platform data support - idxd and xilinx driver updates" * tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits) dmaengine: imx-sdma: Remove platform data header dmaengine: xilinx: dpdma: Fix spacing around addr[i-1] dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t dmaengine: altera-msgdma: add OF support MAINTAINERS: add entry for Altera mSGDMA dt-bindings: dma: add schema for altera-msgdma dmaengine: xilinx: dpdma: fix kernel-doc dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy() dmaengine: sh: Remove unused shdma-of driver dt-bindings: dmaengine: Remove SHDMA Device Tree bindings dmaengine: qcom: gpi: Add SM8250 compatible dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors dmaengine: hsu: Account transferred bytes dmaengine: Move kdoc description of struct dma_chan_percpu closer to it dmaengine: xilinx: dpdma: Print debug message when losing vsync race dmaengine: xilinx: dpdma: Print channel number in kernel log messages dt-bindings: dma: convert arm-pl08x to yaml dmaengine: idxd: remove devm allocation for idxd->int_handles ...
2021-06-24dmaengine: imx-sdma: Remove platform data headerVladimir Zapolskiy
Since commit 6c5f05a6cd88 ("ARM: imx3: Remove imx3 soc_init()") there are no more users of struct sdma_script_start_addrs outside of the driver itself, thus let's move the struct declaration just to the driver source code and remove the header file as unused one. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210620191103.156626-1-vz@mleia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-24dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]Michal Simek
Use proper spacing for array calculation. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/ef7cde6f793bfa6f3dd0a8898bad13b6407479b0.1624446456.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-24dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_tMichal Simek
Use u32 kernel type instead of uint32_t. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/9569008794d519b487348bfeafbfd76c5da5755e.1624446336.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16Merge tag 'dmaengine-fix-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes, notably: - More idxd fixes for driver unregister, error handling and bus assignment - HAS_IOMEM depends fix for few drivers - lock fix in pl330 driver - xilinx drivers fixes for initialize registers, missing dependencies and limiting descriptor IDs - mediatek descriptor management fixes" * tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma dmaengine: mediatek: do not issue a new desc if one is still current dmaengine: mediatek: free the proper desc in desc_free handler dmaengine: ipu: fix doc warning in ipu_irq.c dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe() dmaengine: idxd: Fix missing error code in idxd_cdev_open() dmaengine: stedma40: add missing iounmap() on error in d40_probe() dmaengine: SF_PDMA depends on HAS_IOMEM dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM dmaengine: idxd: Add missing cleanup for early error out in probe call dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits dmaengine: xilinx: dpdma: Add missing dependencies to Kconfig dmaengine: stm32-mdma: fix PM reference leak in stm32_mdma_alloc_chan_resourc() dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc() dmaengine: xilinx: dpdma: initialize registers before request_irq dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc dmaengine: fsl-dpaa2-qdma: Fix error return code in two functions dmaengine: idxd: add missing dsa driver unregister dmaengine: idxd: add engine 'struct device' missing bus type assignment
2021-06-16dmaengine: altera-msgdma: add OF supportOlivier Dautricourt
This driver had no device tree support. - add compatible field "altr,socfpga-msgdma" - register dma controller with of_dma_controller_register Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com> Link: https://lore.kernel.org/r/7459635ba093d87b6bf12413cf7cfe09f6e3019b.1623251990.git.olivier.dautricourt@orolia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16dmaengine: xilinx: dpdma: fix kernel-docYang Li
Fix function name in xilinx/xilinx_dpdma.c comment to remove a warning found by kernel-doc. drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for xilinx_dpdma_chan_no_ostand(). Prototype was for xilinx_dpdma_chan_notify_no_ostand() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()Austin Kim
The second parameter of spinlock_irq[save/restore] function is flags, which is the last input parameter of sf_pdma_prep_dma_memcpy(). So declare local variable 'iflags' to be used as the second parameter of spinlock_irq[save/restore] function. Signed-off-by: Austin Kim <austin.kim@lge.com> Link: https://lore.kernel.org/r/20210611065336.GA1121@raspberrypi Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16dmaengine: sh: Remove unused shdma-of driverGeert Uytterhoeven
Remove the DT-based Renesas SHDMA DMA multiplexer driver, as it is unused. The DMA multiplexer node and one DMA controller instance were added to the R-Mobile APE6 .dtsi file, but DMA support was never fully enabled, cfr. commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e9445a5f4ac15fc4d3b376b5e675e39f8c95b967.1623406640.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16dmaengine: qcom: gpi: Add SM8250 compatibleKonrad Dybcio
SM8250 seems to work just fine, so add a shiny new compatible for it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210614235358.444834-2-konrad.dybcio@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14Merge tag 'v5.13-rc6' into driver-core-nextGreg Kroah-Hartman
We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-07dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tailZou Wei
Using list_move_tail() instead of list_del() + list_add_tail(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1623036035-30614-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-07dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dmaGuillaume Ranquet
As recommended by the doc in: Documentation/drivers-api/dmaengine/provider.rst Use GFP_NOWAIT to not deplete the emergency pool. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-4-granquet@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-07dmaengine: mediatek: do not issue a new desc if one is still currentGuillaume Ranquet
Avoid issuing a new desc if one is still being processed as this can lead to some desc never being marked as completed. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-3-granquet@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-07dmaengine: mediatek: free the proper desc in desc_free handlerGuillaume Ranquet
The desc_free handler assumed that the desc we want to free was always the current one associated with the channel. This is seldom the case and this is causing use after free crashes in multiple places (tx/rx/terminate...). BUG: KASAN: use-after-free in mtk_uart_apdma_rx_handler+0x120/0x304 Call trace: dump_backtrace+0x0/0x1b0 show_stack+0x24/0x34 dump_stack+0xe0/0x150 print_address_description+0x8c/0x55c __kasan_report+0x1b8/0x218 kasan_report+0x14/0x20 __asan_load4+0x98/0x9c mtk_uart_apdma_rx_handler+0x120/0x304 mtk_uart_apdma_irq_handler+0x50/0x80 __handle_irq_event_percpu+0xe0/0x210 handle_irq_event+0x8c/0x184 handle_fasteoi_irq+0x1d8/0x3ac __handle_domain_irq+0xb0/0x110 gic_handle_irq+0x50/0xb8 el0_irq_naked+0x60/0x6c Allocated by task 3541: __kasan_kmalloc+0xf0/0x1b0 kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0x90/0x2dc mtk_uart_apdma_prep_slave_sg+0x6c/0x1a0 mtk8250_dma_rx_complete+0x220/0x2e4 vchan_complete+0x290/0x340 tasklet_action_common+0x220/0x298 tasklet_action+0x28/0x34 __do_softirq+0x158/0x35c Freed by task 3541: __kasan_slab_free+0x154/0x224 kasan_slab_free+0x14/0x24 slab_free_freelist_hook+0xf8/0x15c kfree+0xb4/0x278 mtk_uart_apdma_desc_free+0x34/0x44 vchan_complete+0x1bc/0x340 tasklet_action_common+0x220/0x298 tasklet_action+0x28/0x34 __do_softirq+0x158/0x35c The buggy address belongs to the object at ffff000063606800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff000063606800, ffff000063606900) The buggy address belongs to the page: page:fffffe00016d8180 refcount:1 mapcount:0 mapping:ffff00000302f600 index:0x0 compound_mapcount: 0 flags: 0xffff00000010200(slab|head) raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00000302f600 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-2-granquet@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03dmaengine: idxd: Use cpu_feature_enabled()Borislav Petkov
When testing x86 feature bits, use cpu_feature_enabled() so that build-disabled features can remain off, regardless of what CPUID says. Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support") Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-By: Vinod Koul <vkoul@kernel.org> Cc: <stable@vger.kernel.org>
2021-06-03dmaengine: ipu: fix doc warning in ipu_irq.cYang Yingliang
Fix the following make W=1 warning and correct description: drivers/dma/ipu/ipu_irq.c:238: warning: expecting prototype for ipu_irq_map(). Prototype was for ipu_irq_unmap() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210603072425.2973570-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()Zou Wei
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1622442963-54095-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03dmaengine: idxd: Fix missing error code in idxd_cdev_open()Jiapeng Chong
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/dma/idxd/cdev.c:113 idxd_cdev_open() warn: missing error code 'rc'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/1622628446-87909-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31Merge 5.13-rc4 into driver-core-nextGreg Kroah-Hartman
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errorsTony Lindgren
There's no need to restore DMA context on CPU_CLUSTER_PM_ENTER_FAILED as the DMA context won't be lost on errors. Note that this does not cause invalid context restore as we already check for busy DMA with omap_dma_busy() in CPU_CLUSTER_PM_ENTER, and block any deeper idle states for the SoC by returning NOTIFY_BAD if busy. If other drivers block deeper idle states with cpu_pm, we now just do a pointless restore, but only if dma was not busy on CPU_CLUSTER_PM_ENTER. Let's update the CPU_CLUSTER_PM_ENTER_FAILED handling for correctness, and add a comment. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210518074347.16908-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 23:48:05 +0000