summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2018-03-22dmaengine: stm32-dmamux: fix a potential buffer overflowPierre-Yves MORDRET
The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-27dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3Yoshihiro Shimoda
According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to 16,777,215 as maximum. So, this patch fixes the max_chunk_size for safety on all of SoCs. Otherwise, a system may hang if the DMATCR is set to 0 on R-Car Gen3. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-02Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - StrongARM SA1111 updates to modernise and remove cruft - Add StrongARM gpio drivers for board GPIOs - Verify size of zImage is what we expect to avoid issues with appended DTB - nommu updates from Vladimir Murzin - page table read-write-execute checking from Jinbum Park - Broadcom Brahma-B15 cache updates from Florian Fainelli - Avoid failure with kprobes test caused by inappropriately placed kprobes - Remove __memzero optimisation (which was incorrectly being used directly by some drivers) * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8745/1: get rid of __memzero() ARM: 8744/1: don't discard memblock for kexec ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag ARM: 8742/1: Always use REFCOUNT_FULL ARM: 8741/1: B15: fix unused label warnings ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU ARM: 8737/1: mm: dump: add checking for writable and executable ARM: 8736/1: mm: dump: make the page table dumping seq_file ARM: 8735/1: mm: dump: make page table dumping reusable ARM: sa1100/neponset: add GPIO drivers for control and modem registers ARM: sa1100/assabet: add BCR/BSR GPIO driver ARM: 8734/1: mm: idmap: Mark variables as ro_after_init ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init ARM: 8732/1: NOMMU: Allow userspace to access background MPU region ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code ARM: 8728/1: B15: Register reboot notifier for KEXEC ARM: 8730/1: B15: Add suspend/resume hooks ARM: 8726/1: B15: Add CPU hotplug awareness ...
2018-01-31Merge tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time is smallish update with updates mainly to drivers: - updates to xilinx and zynqmp dma controllers - update reside calculation for rcar controller - more RSTify fixes for documentation - add support for race free transfer termination and updating for users for that - support for new rev of hidma with addition new APIs to get device match data in ACPI/OF - random updates to bunch of other drivers" * tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits) dmaengine: dmatest: fix container_of member in dmatest_callback dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy' dmaengine: qcom_hidma: simplify DT resource parsing dmaengine: xilinx_dma: Free BD consistent memory dmaengine: xilinx_dma: Fix warning variable prev set but not used dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma dmaengine: doc: format struct fields using monospace dmaengine: doc: fix bullet list formatting dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 dmaengine: cppi41: Fix channel queues array size check dmaengine: imx-sdma: Add MODULE_FIRMWARE dmaengine: xilinx_dma: Fix typos dmaengine: xilinx_dma: Differentiate probe based on the ip type dmaengine: xilinx_dma: fix style issues from checkpatch dmaengine: xilinx_dma: Fix kernel doc warnings dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor dmaengine: zynqmp_dma: Fix race condition in the probe ...
2018-01-31Merge branch 'topic/xilinx' into for-linusVinod Koul
2018-01-31Merge branch 'topic/virt-dma' into for-linusVinod Koul
2018-01-31Merge branch 'topic/timb' into for-linusVinod Koul
2018-01-31Merge branch 'topic/ti' into for-linusVinod Koul
2018-01-31Merge branch 'topic/tegra' into for-linusVinod Koul
2018-01-31Merge branch 'topic/stm' into for-linusVinod Koul
2018-01-31Merge branch 'topic/sprd' into for-linusVinod Koul
2018-01-31Merge branch 'topic/rcar' into for-linusVinod Koul
2018-01-31Merge branch 'topic/qcom_hidma' into for-linusVinod Koul
2018-01-31Merge branch 'topic/qcom' into for-linusVinod Koul
2018-01-31Merge branch 'topic/mic' into for-linusVinod Koul
2018-01-31Merge branch 'topic/imx' into for-linusVinod Koul
2018-01-31Merge branch 'topic/cppi' into for-linusVinod Koul
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-30dmaengine: dmatest: fix container_of member in dmatest_callbackYang Shunyong
The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait. Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...") Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com> Acked-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-21Merge branches 'fixes', 'misc', 'sa1111' and 'sa1100-for-next' into for-nextRussell King
2018-01-21ARM: 8745/1: get rid of __memzero()Nicolas Pitre
The __memzero assembly code is almost identical to memset's except for two orr instructions. The runtime performance of __memset(p, n) and memset(p, 0, n) is accordingly almost identical. However, the memset() macro used to guard against a zero length and to call __memzero at compile time when the fill value is a constant zero interferes with compiler optimizations. Arnd found tha the test against a zero length brings up some new warnings with gcc v8: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82103 And successively rremoving the test against a zero length and the call to __memzero optimization produces the following kernel sizes for defconfig with gcc 6: text data bss dec hex filename 12248142 6278960 413588 18940690 1210312 vmlinux.orig 12244474 6278960 413588 18937022 120f4be vmlinux.no_zero_test 12239160 6278960 413588 18931708 120dffc vmlinux.no_memzero So it is probably not worth keeping __memzero around given that the compiler can do a better job at inlining trivial memset(p,0,n) on its own. And the memset code already handles a zero length just fine. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-19dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error checkWei Yongjun
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-18Merge branch 'pm-core'Rafael J. Wysocki
* pm-core: (29 commits) dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag PM: i2c-designware-platdrv: Optimize power management PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path PM / core: Assign the wakeup_path status flag in __device_prepare() PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization PM / core: Add helpers for subsystem callback selection PM / wakeup: Drop redundant check from device_init_wakeup() PM / wakeup: Drop redundant check from device_set_wakeup_enable() PM / wakeup: only recommend "call"ing device_init_wakeup() once ...
2018-01-17dmaengine: rcar-dmac: Make DMAC reinit during system resume explicitGeert Uytterhoeven
The current (empty) system sleep callbacks rely on the PM core to force a runtime resume to reinitialize the DMAC registers during system resume. Without a reinitialization, e.g. SCIF DMA will hang silently after a system resume on R-Car Gen3. Make this explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks instead. Use SET_LATE_SYSTEM_SLEEP_PM_OPS() as DMA engines must be initialized before all DMA slave devices. Fixes: 17218e0092f8 "PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()" Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-15dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'Vinod Koul
Sparse warns that 'sprd_dma_prep_dma_memcpy' should be static so make it static. drivers/dma/sprd-dma.c:713:32: warning: symbol'sprd_dma_prep_dma_memcpy' was not declared. Should it be static? Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: qcom_hidma: simplify DT resource parsingRob Herring
The hidma driver open codes populating address and IRQ resources from DT. We have standard functions of_address_to_resource and of_irq_to_resource for this, so use them instead. The DT binding states each child should have 2 addresses and 1 IRQ, so we can simplify the logic and do a fixed size resource allocation. Using the standard of_address_to_resource will also do any address translation which was missing. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: Free BD consistent memoryKedareswara rao Appana
Free BD consistent memory while freeing the channel i.e in free_chan_resources. Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: Fix warning variable prev set but not usedKedareswara rao Appana
This patch fixes the below sparse warning in the driver drivers/dma/xilinx/xilinx_dma.c: In function ‘xilinx_vdma_dma_prep_interleaved’: drivers/dma/xilinx/xilinx_dma.c:1614:43: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable] struct xilinx_vdma_tx_segment *segment, *prev = NULL; Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdmaKedareswara rao Appana
If the hardware is configured for Scatter Gather(SG) mode, and hardware is idle, in the control register SG mode bit must be set to a 0 then back to 1 by the software, to force the CDMA SG engine to use a new value written to the CURDESC_PNTR register, failure to do so could result errors from the dmaengine. This patch updates the same. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-03Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Miscellaneous fixes. - Torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63Vignesh R
Register layout of a typical TPCC_EVT_MUX_M_N register is such that the lowest numbered event is at the lowest byte address and highest numbered event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is different, in that the lowest numbered event is at the highest address and highest numbered event is at the lowest address. Therefore, modify ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register accordingly. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-22dmaengine: cppi41: Fix channel queues array size checkGomonovych, Vasyl
The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-22dmaengine: imx-sdma: Add MODULE_FIRMWARENicolas Chauvet
This avoid the following error when using an initramfs on wandboard quad Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: Fix typosVinod Koul
some typos is comments, so fix them up /s/enusres/ensures /s/descripotrs/descriptors /s/Submited/Submitted /s/pollling/polling Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: Differentiate probe based on the ip typeKedareswara rao Appana
This patch updates the probe banner info based on the ip probed. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: fix style issues from checkpatchKedareswara rao Appana
This patch fixes below. ERROR: open brace '{' following function definitions go on the next line +static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev, + struct device_node *node) { Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: Fix kernel doc warningsKedareswara rao Appana
This patch fixes the kernel doc warnings in the driver. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: Fix race condition in the driver for multiple ↵Kedareswara rao Appana
descriptor scenario As per axi dmaengine spec the software must not move the tail pointer to a location that has not been updated (next descriptor field of the h/w descriptor should always point to a valid address). When user submits multiple descriptors on the recv side, with the current driver flow the last buffer descriptor next descriptor field points to a invalid location, resulting the invalid data or errors from the axidma dmaengine. This patch fixes this issue by creating a buffer descritpor chain during channel allocation itself and use those buffer descriptors for the subsequent dma operations. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdmaKedareswara rao Appana
VDMA engine default frame buffer configuration is cirular mode. in this mode dmaengine continuously circles through h/w configured fstore frame buffers. When vdma h/w is configured for more than one frame. for example h/w is configured for n number of frames, user submits less than n number of frames and triggered the dmaengine using issue_pending API. since the h/w (or) driver default configuraiton is circular mode h/w tries to write/read from an invalid frame buffer resulting errors from the vdma dmaengine. This patch fixes this issue by enabling the park mode as default mode configuration for frame buffers in s/w, so that driver can handle all cases for "k" frames where n%k==0 (n is a multiple of k) by simply replicating the frame pointers. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: xilinx_dma: Check for channel idle state before submitting dma ↵Kedareswara rao Appana
descriptor Add variable for checking channel idle state to ensure that dma descriptor is not submitted when dmaengine is in progress. This will avoid the polling for a bit in the status register to know dma state in the driver hot path. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: zynqmp_dma: Fix race condition in the probeKedareswara rao Appana
Incase of interrupt property is not present, Driver is trying to free an invalid irq, This patch fixes it by adding a check before freeing the irq. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: zynqmp_dma: Fix issues with overflow interruptKedareswara rao Appana
This patch fixes the below issues. --> Need to clear the channel data count register when overflow interrupts occurs. --> Reduce the log level from _info to _dbg when overflow interrupt occurs. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: zynqmp_dma: Fix warning variable 'val' set but not usedKedareswara rao Appana
This patch fixes the below warning drivers/dma/xilinx/zynqmp_dma.c: In function 'zynqmp_dma_handle_ovfl_int': drivers/dma/xilinx/zynqmp_dma.c:522:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: zynqmp_dma: Fix kernel doc-formatKedareswara rao Appana
This patch fixes the below kernel doc warnings drivers/dma/xilinx/zynqmp_dma.c:552: info: Scanning doc for zynqmp_dma_device_config drivers/dma/xilinx/zynqmp_dma.c:558: warning: No description found for return value of 'zynqmp_dma_device_config' drivers/dma/xilinx/zynqmp_dma.c:649: info: Scanning doc for zynqmp_dma_free_descriptors drivers/dma/xilinx/zynqmp_dma.c:653: warning: No description found for parameter 'chan' drivers/dma/xilinx/zynqmp_dma.c:653: warning: Excess function parameter 'dchan' description in 'zynqmp_dma_free_descriptors' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-18dmaengine: zynqmp_dma: Add runtime pm supportKedareswara rao Appana
This patch adds runtime pm support in the driver. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-15dmaengine: fsl-edma: disable clks on all error pathsAndreas Platschek
Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-13dmaengine: qcom_hidma: Add identity register supportSinan Kaya
The location for destination event channel register has been relocated from offset 0x28 to 0x40. Update the code accordingly. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-13dmaengine: qcom_hidma: Add support for the new revisionSinan Kaya
Add support for probing the newer HW and also organize MSI capable hardware into an array for maintenance reasons. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-12dmaengine: qcom_hidma: check pending interruptsSinan Kaya
Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>