| Age | Commit message (Collapse) | Author |
|---|
|
As virtual_context_destroy() may be called from a request signal, it may
be called from inside an irq-off section, and so we need to do a full
save/restore of the irq state rather than blindly re-enable irqs upon
unlocking.
<4> [110.024262] WARNING: inconsistent lock state
<4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U
<4> [110.024292] --------------------------------
<4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
<4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes:
<4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915]
<4> [110.024592] {IN-HARDIRQ-W} state was registered at:
<4> [110.024612] lock_acquire+0xa7/0x1c0
<4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50
<4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915]
<4> [110.024808] irq_work_run_list+0x49/0x70
<4> [110.024824] irq_work_run+0x26/0x50
<4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0
<4> [110.024855] irq_work_interrupt+0xf/0x20
<4> [110.024871] __do_softirq+0xb7/0x47f
<4> [110.024885] irq_exit+0xba/0xc0
<4> [110.024898] do_IRQ+0x83/0x160
<4> [110.024910] ret_from_intr+0x0/0x1d
<4> [110.024922] irq event stamp: 172864
<4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50
<4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40
<4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f
<4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0
<4> [110.025031]
other info that might help us debug this:
<4> [110.025049] Possible unsafe locking scenario:
<4> [110.025065] CPU0
<4> [110.025075] ----
<4> [110.025084] lock(&(&rq->lock)->rlock);
<4> [110.025099] <Interrupt>
<4> [110.025109] lock(&(&rq->lock)->rlock);
<4> [110.025124]
*** DEADLOCK ***
<4> [110.025144] 4 locks held by kworker/0:0/5:
<4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620
<4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620
<4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915]
<4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915]
<4> [110.025634]
stack backtrace:
<4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1
<4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017
<4> [110.025856] Workqueue: events engine_retire [i915]
<4> [110.025872] Call Trace:
<4> [110.025891] dump_stack+0x71/0x9b
<4> [110.025907] mark_lock+0x49a/0x500
<4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200
<4> [110.025946] mark_held_locks+0x49/0x70
<4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50
<4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0
<4> [110.025995] _raw_spin_unlock_irq+0x24/0x50
<4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915]
<4> [110.026376] __active_retire+0xb4/0x290 [i915]
<4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0
<4> [110.026613] i915_request_retire+0x451/0x930 [i915]
<4> [110.026766] retire_requests+0x4d/0x60 [i915]
<4> [110.026919] engine_retire+0x63/0xe0 [i915]
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk
(cherry picked from commit 6f7ac8285371fb0df58aba861eaab387f79ed04d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
|
|
Pull drm updates from Dave Airlie:
"Lots of stuff in here, though it hasn't been too insane this merge
apart from dealing with the security fun.
uapi:
- export different colorspace properties on DP vs HDMI
- new fourcc for ARM 16x16 block format
- syncobj: allow querying last submitted timeline value
- DRM_FORMAT_BIG_ENDIAN defined as unsigned
core:
- allow using gem vma manager in ttm
- connector/encoder/bridge doc fixes
- allow more than 3 encoders for a connector
- displayport mst suspend/resume reprobing support
- vram lazy unmapping, uniform vram mm and gem vram
- edid cleanups + AVI informframe bar info
- displayport helpers - dpcd parser added
dp_cec:
- Allow a connector to be associated with a cec device
ttm:
- pipelining with no_gpu_wait fix
- always keep BOs on the LRU
sched:
- allow free_job routine to sleep
i915:
- Block userptr from mappable GTT
- i915 perf uapi versioning
- OA stream dynamic reconfiguration
- make context persistence optional
- introduce DRM_I915_UNSTABLE Kconfig
- add fake lmem testing under unstable
- BT.2020 support for DP MSA
- struct mutex elimination
- Tigerlake display/PLL/power management improvements
- Jasper Lake PCH support
- refactor PMU for multiple GPUs
- Icelake firmware update
- Split out vga + switcheroo code
amdgpu:
- implement dma-buf import/export without helpers
- vega20 RAS enablement
- DC i2c over aux fixes
- renoir GPU reset
- DC HDCP support
- BACO support for CI/VI asics
- MSI-X support
- Arcturus EEPROM support
- Arcturus VCN encode support
- VCN dynamic powergating on RV/RV2
amdkfd:
- add navi12/14/renoir support to kfd
radeon:
- SI dpm fix ported from amdgpu
- fix bad DMA on ppc platforms
gma500:
- memory leak fixes
qxl:
- convert to new gem mmap
exynos:
- build warning fix
komeda:
- add aclk sysfs attribute
v3d:
- userspace cleanup uapi change
i810:
- fix for underflow in dispatch ioctls
ast:
- refactor show_cursor
mgag200:
- refactor show_cursor
arcgpu:
- encoder finding improvements
mediatek:
- mipi_tx, dsi and partial crtc support for MT8183 SoC
- rotation support
meson:
- add suspend/resume support
omap:
- misc refactors
tegra:
- DisplayPort support for Tegra 210, 186 and 194.
- IOMMU-backed DMA API fixes
panfrost:
- fix lockdep issue
- simplify devfreq integration
rcar-du:
- R8A774B1 SoC support
- fixes for H2 ES2.0
sun4i:
- vcc-dsi regulator support
virtio-gpu:
- vmexit vs spinlock fix
- move to gem shmem helpers
- handle large command buffers with cma"
* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
merge fix for "ftrace: Rework event_create_dir()"
drm/amdgpu: Update Arcturus golden registers
drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: remove experimental flag for Navi14
drm/amdgpu: disable gfxoff when using register read interface
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
drm/amd/display: Fix debugfs on MST connectors
drm/amdgpu/nv: add asic func for fetching vbios from rom directly
drm/amdgpu: put flush_delayed_work at first
drm/amdgpu/vcn2.5: fix the enc loop with hw fini
...
|
|
On context retiring, we may invoke the kernel_context to unpin this
context. Elsewhere, we may use the kernel_context to modify this
context. This currently leads to an AB-BA lock inversion, so we need to
back-off from the contended lock, and repeat.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111732
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a9877da2d629 ("drm/i915/oa: Reconfigure contexts on the fly")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126065521.2331017-1-chris@chris-wilson.co.uk
(cherry picked from commit 58b4c1a07ada7fb91ea757bdb9bd47df02207357)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
|
|
In order to avoid some nasty mutex inversions, commit 09c5ab384f6f
("drm/i915: Keep rings pinned while the context is active") allowed the
intel_ring unpinning to be run concurrently with the next context
pinning it. Thus each step in intel_ring_unpin() needed to be atomic and
ordered in a nice onion with intel_ring_pin() so that the lifetimes
overlapped and were always safe.
Sadly, a few steps in intel_ring_unpin() were overlooked, such as
closing the read/write pointers of the ring and discarding the
intel_ring.vaddr, as these steps were not serialised with
intel_ring_pin() and so could leave the ring in disarray.
Fixes: 09c5ab384f6f ("drm/i915: Keep rings pinned while the context is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-6-chris@chris-wilson.co.uk
(cherry picked from commit a266bf42006004306dd48a9082c35dfbff153307)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The major drawback of commit 7e34f4e4aad3 ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References: 7e34f4e4aad3 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References: 2248a28384fe ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
(cherry picked from commit 4f88f8747fa43c97c3b3712d8d87295ea757cc51)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
(cherry picked from commit 88a4655e75ac8f55eea5e3f38b176cba9cf653b5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes: 97f9af78f38d ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
(cherry picked from commit da0ef77e1e0ccff703efee82406c629d5c4f4bbb)
[Joonas: Fixed Fixes: tag to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Since we want to do a lockless read of the current active request, and
that request is written to by process_csb also without serialisation, we
need to instruct gcc to take care in reading the pointer itself.
Otherwise, we have observed execlists_active() to report 0x40.
[ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4
[ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
[ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 }
[ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940
which is impossible!
The answer is that as we keep the existing execlists->active pointing
into the array as we copy over that array, the unserialised read may see
a partial pointer value.
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk
(cherry picked from commit 331bf90591573dfe6c8e892239713ef9702f1396)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In commit a79ca656b648 ("drm/i915: Push the wakeref->count deferral to
the backend"), I erroneously concluded that we last modify the engine
inside __i915_request_commit() meaning that we could enable concurrent
submission for userspace as we enqueued this request. However, this
falls into a trap with other users of the engine->kernel_context waking
up and submitting their request before the idle-switch is queued, with
the result that the kernel_context is executed out-of-sequence most
likely upsetting the GPU and certainly ourselves when we try to retire
the out-of-sequence requests.
As such we need to hold onto the effective engine->kernel_context mutex
lock (via the engine pm mutex proxy) until we have finish queuing the
request to the engine.
v2: Serialise against concurrent intel_gt_retire_requests()
v3: Describe the hairy locking scheme with intel_gt_retire_requests()
for future reference.
v4: Combine timeline->lock and engine pm release; it's hairy.
Fixes: a79ca656b648 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-2-chris@chris-wilson.co.uk
(cherry picked from commit 5cba288466e9b229feb68295675246e7522fb5eb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The general concept was that intel_timeline.active_count was locked by
the intel_timeline.mutex. The exception was for power management, where
the engine->kernel_context->timeline could be manipulated under the
global wakeref.mutex.
This was quite solid, as we always manipulated the timeline only while
we held an engine wakeref.
And then we started retiring requests outside of struct_mutex, only
using the timelines.active_list and the timeline->mutex. There we
started manipulating intel_timeline.active_count outside of an engine
wakeref, and so introduced a race between __engine_park() and
intel_gt_retire_requests(), a race that could result in the
engine->kernel_context not being added to the active timelines and so
losing requests, which caused us to keep the system permanently powered
up [and unloadable].
The race would be easy to close if we could take the engine wakeref for
the timeline before we retire -- except timelines are not bound to any
engine and so we would need to keep all active engines awake. The
alternative is to guard intel_timeline_enter/intel_timeline_exit for use
outside of the timeline->mutex.
Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-1-chris@chris-wilson.co.uk
(cherry picked from commit a6edbca74b305adc165e67065d7ee766006e6a48)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes: 51fbd8de87dc ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References: a0855d24fc22d ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
(cherry picked from commit 07779a76ee1f93f930cf697b22be73d16e14f50c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only
defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is
both declared and defined.
Reported-by: kbuild-all@lists.01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: a70a9e998e8e ("drm/i915: Defer rc6 shutdown to suspend_late")
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
From inside an active timeline in the execbuf ioctl, we may try to
reclaim some space in the GGTT. We need GGTT space for all objects on
!full-ppgtt platforms, and for context images everywhere. However, to
free up space in the GGTT we may need to remove some pinned objects
(e.g. context images) that require flushing the idle barriers to remove.
For this we use the big hammer of intel_gt_wait_for_idle()
However, commit 7936a22dd466 ("drm/i915/gt: Wait for new requests in
intel_gt_retire_requests()") will continue spinning on the wait if a
timeline is active but lacks requests, as is the case during execbuf
reservation. Spinning forever is quite time consuming, so revert that
commit and start again.
In practice, the effect commit 7936a22dd466 was trying to achieve is
accomplished by commit 1683d24c1470 ("drm/i915/gt: Move new timelines
to the end of active_list"), so there is no immediate rush to replace
the looping.
Testcase: igt/gem_exec_reloc/basic-range
Fixes: a46bfdc83fee ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
References: 1683d24c1470 ("drm/i915/gt: Move new timelines to the end of active_list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk
(cherry picked from commit 689122dcc36e08f53732adf7ae0246f62eff3eb6)
[Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
For our current users we don't expect pool objects to be writable from
the gpu.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 4f7af1948abc ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119150154.18249-1-matthew.auld@intel.com
(cherry picked from commit d18580b08b92ec4105eb0ede2d676e8b1f5a66c3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org>
Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
(cherry picked from commit 82e0c5bbd6eb1d274b5a3e519ff0ab91f1f8e537)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.
Fixes: 7e8057626640 ("drm/i915: Drop struct_mutex from around i915_retire_requests()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk
(cherry picked from commit 7936a22dd4660d24b4ca0668c02b0372127cab44)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.
Fixes: c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
(cherry picked from commit 980f87a2edb3e7825949ebd0a7e63ab574c20816)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Here is this weeks non-intel hw vuln fixes pull. Three drivers, all
small fixes.
i915:
- MOCS table fixes for EHL and TGL
- Update Display's rawclock on resume
- GVT's dmabuf reference drop fix
amdgpu:
- Fix a potential crash in firmware parsing
sun4i:
- One fix to the dotclock dividers range for sun4i"
* tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: fix null pointer deref in firmware header printing
drm/i915/tgl: MOCS table update
Revert "drm/i915/ehl: Update MOCS table for EHL"
drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.
drm/i915: update rawclk also on resume
drm/i915/gvt: fix dropping obj reference twice
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- PMU "Frequency" is reported as accumulated cycles
- Avoid OOPS in dumb_create IOCTL when no CRTCs
- Mitigation for userptr put_pages deadlock with trylock_page
- Fix to avoid freeing heartbeat request too early
- Fix LRC coherency issue
- Fix Bugzilla #112212: Avoid screen corruption on MST
- Error path fix to unlock context on failed context VM SETPARAM
- Always consider holding preemption a privileged op in perf/OA
- Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV
- Protect context while grabbing its name for the request
- Don't resize aliasing ppGTT size
- Smaller fixes picked by tooling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114085213.GA6440@jlahtine-desk.ger.corp.intel.com
|
|
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Otherwise it all looks good.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The bspec was just updated with a minor correction to entry 61 (it
shouldn't have had the SCF bit set).
v2:
- Add a MOCS_ENTRY_UNUSED() and use it to declare the
explicitly-reserved MOCS entries. (Lucas)
- Move the warning suppression from the Makefile to a #pragma that only
affects the TGL table. (Lucas)
v3:
- Entries 16 and 17 are identical to ICL now, so no need to explicitly
adjust them (or mess with compiler warning overrides).
Bspec: 45101
Fixes: 2ddf992179c4 ("drm/i915/tgl: Define MOCS entries for Tigerlake")
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
(cherry picked from commit bfb0e8e63d865559cc97af235aea583b7dcc235f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit f4071997f1de016780ec6b79c63d90cd5886ee83.
These extra EHL entries won't behave as expected without a bit more work
on the kernel side so let's drop them until that kernel work has had a
chance to land. Userspace trying to use these new entries won't get the
advantage of the new functionality these entries are meant to provide,
but at least it won't misbehave.
When we do add these back in the future, we'll probably want to
explicitly use separate tables for ICL and EHL so that userspace
software that mistakenly uses these entries (which are undefined on ICL)
sees the same behavior it sees with all the other undefined entries.
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: f4071997f1de ("drm/i915/ehl: Update MOCS table for EHL")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 046091758b50a5fff79726a31c1391614a3d84c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
(cherry picked from commit 31b61f0ef9af62b6404d8df5dcd2cf58f80c9f53)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes: c36eebd9ba5d ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
(cherry picked from commit fecffa4668cf62e679aeea8caa9d0f241f822578)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
(cherry picked from commit 841e86728615baa77b0ea9d8b357e66052c75fe5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.
In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.
Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.
v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
|
|
Call suspend_prepare first so that we don't leave GuC so confused.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101174405.7389-1-chris@chris-wilson.co.uk
(cherry picked from commit 833e979db36c0202f21e1e0bdd7339a27e50b8e3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The counter is removed from the pm wakeref count, but it remains intact
so that we can restore it upon resume. Ergo inside suspend, it may have
a value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-1-chris@chris-wilson.co.uk
(cherry picked from commit 83c55ee82f3ac5a1c36dab9f7150554c4da773a8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().
We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk
(cherry picked from commit c601cb2135fda0b5fb9d08153b0125fcb153c7e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We already track the debugfs user_forcewake on the GT, so it is natural
to pull the suspend/resume handling under gt/ as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-3-chris@chris-wilson.co.uk
(cherry picked from commit 9ab3fe2d7dc39b088591b0121f041cbfd6bb1ef8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Assume all responsibility for operating on the HW to sanitize the GT
state upon load/resume in intel_gt_sanitize() itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-1-chris@chris-wilson.co.uk
(cherry picked from commit 797a615357ac0feb79c9ce41f5eaac3eb738a51f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.
A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk
|
|
Recent GuC doesn't require the shared area. We still have one user in
i915 (engine reset via guc) because we haven't updated the command to
match the current guc submission flow [1]. Since the flow in guc is
about to change again, just disable the command for now and add a note
that we'll implement it as part of the new flow.
[1] https://patchwork.freedesktop.org/patch/295038/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-2-daniele.ceraolospurio@intel.com
|
|
Recent GuC binaries (including all the ones we're currently using)
don't require this shared area anymore, having moved the relevant
entries into the stage pool instead. i915 itself doesn't write
anything into it either, so we can safely drop it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-1-daniele.ceraolospurio@intel.com
|
|
If the idle_pulse fails to flush the i915_active, dump the tree to see
if that has any clues.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031101116.19894-1-chris@chris-wilson.co.uk
|
|
When checking the heartbeat pulse, we expect it to have been sent by the
time we have slept. We can verify this by checking the engine serial
number to see if that matches the predicted pulse serial. It will always
be true if, and only if, the pulse was sent by itself (as designed by
the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031094259.23028-1-chris@chris-wilson.co.uk
|
|
GuC 35.2.0 and HuC 7.0.3 are the first production releases for TGL.
GuC 35.2 for Gen12 is interface-compatible with 33.0 on older Gens,
because the differences are related to additional blocks/commands in
the interface to support new Gen12 features. These parts of the
interface will be added when the relevant features are enabled.
v2: fix typos (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026003507.21769-1-daniele.ceraolospurio@intel.com
|
|
During startup, we may find ourselves in an interesting position where
we haven't fully enabled RPS before the display starts trying to use it.
This may lead to an imbalance in our "interactive" counter:
<3>[ 4.813326] intel_rps_mark_interactive:652 GEM_BUG_ON(!rps->power.interactive)
<4>[ 4.813396] ------------[ cut here ]------------
<2>[ 4.813398] kernel BUG at drivers/gpu/drm/i915/gt/intel_rps.c:652!
<4>[ 4.813430] invalid opcode: 0000 [#1] PREEMPT SMP PTI
<4>[ 4.813438] CPU: 1 PID: 18 Comm: kworker/1:0H Not tainted 5.4.0-rc5-CI-CI_DRM_7209+ #1
<4>[ 4.813447] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017
<4>[ 4.813525] Workqueue: events_highpri intel_atomic_cleanup_work [i915]
<4>[ 4.813589] RIP: 0010:intel_rps_mark_interactive+0xb3/0xc0 [i915]
<4>[ 4.813597] Code: bc 3f de e0 48 8b 35 84 2e 24 00 49 c7 c0 f3 d4 4e a0 b9 8c 02 00 00 48 c7 c2 80 9c 48 a0 48 c7 c7 3e 73 34 a0 e8 8d 3b e5 e0 <0f> 0b 90 66 2e 0f 1f 84 00 00 00 00 00 80 bf c0 00 00 00 00 74 32
<4>[ 4.813616] RSP: 0018:ffffc900000efe00 EFLAGS: 00010286
<4>[ 4.813623] RAX: 000000000000000e RBX: ffff8882583cc7f0 RCX: 0000000000000000
<4>[ 4.813631] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888275969c00
<4>[ 4.813639] RBP: 0000000000000000 R08: 0000000000000008 R09: ffff888275ace000
<4>[ 4.813646] R10: ffffc900000efe00 R11: ffff888275969c00 R12: ffff8882583cc8d8
<4>[ 4.813654] R13: ffff888276abce00 R14: 0000000000000000 R15: ffff88825e878860
<4>[ 4.813662] FS: 0000000000000000(0000) GS:ffff888276a80000(0000) knlGS:0000000000000000
<4>[ 4.813672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 4.813678] CR2: 00007f051d5ca0a8 CR3: 0000000262f48001 CR4: 00000000003606e0
<4>[ 4.813686] Call Trace:
<4>[ 4.813755] intel_cleanup_plane_fb+0x4e/0x60 [i915]
<4>[ 4.813764] drm_atomic_helper_cleanup_planes+0x4d/0x70
<4>[ 4.813833] intel_atomic_cleanup_work+0x15/0x80 [i915]
<4>[ 4.813842] process_one_work+0x26a/0x620
<4>[ 4.813850] worker_thread+0x37/0x380
<4>[ 4.813857] ? process_one_work+0x620/0x620
<4>[ 4.813864] kthread+0x119/0x130
<4>[ 4.813870] ? kthread_park+0x80/0x80
<4>[ 4.813878] ret_from_fork+0x3a/0x50
<4>[ 4.813887] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul btusb btrtl btbcm btintel snd_hda_intel snd_intel_nhlt snd_hda_codec bluetooth snd_hwdep snd_hda_core ghash_clmulni_intel snd_pcm e1000e ecdh_generic ecc ptp pps_core mei_me mei prime_numbers
<4>[ 4.813934] ---[ end trace c13289af88174ffc ]---
The solution employed is to not worry about RPS state and keep the tally
of the interactive counter separate. When we do enable RPS, we will then
take the display activity into account.
Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030103827.2413-1-chris@chris-wilson.co.uk
|
|
Execlists uses a scheduling quantum (a timeslice) to alternate execution
between ready-to-run contexts of equal priority. This ensures that all
users (though only if they of equal importance) have the opportunity to
run and prevents livelocks where contexts may have implicit ordering due
to userspace semaphores. However, not all workloads necessarily benefit
from timeslicing and in the extreme some sysadmin may want to disable or
reduce the timeslicing granularity.
The timeslicing mechanism can be compiled out^W^W disabled (but should
DCE!) with
./scripts/config --set-val DRM_I915_TIMESLICE_DURATION 0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029091632.26281-1-chris@chris-wilson.co.uk
|
|
Commit 50d84418f586 ("drm/i915: Add i915 to i915_inject_probe_failure")
introduced new functions unfortunately named incompatibly with rules
established by commit f2db53f14d3d ("drm/i915: Replace "_load" with
"_probe" consequently"). Fix it for consistency.
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029102036.6326-2-janusz.krzysztofik@linux.intel.com
|
|
The design of the OA unit has been split into several units. We now
have a global unit (OAG) and a render specific unit (OAR). This leads
to some changes on how we program things. Some details :
OAR:
- has its own set of counter registers, they are per-context
saved/restored
- counters are not written to the circular OA buffer
- a snapshot of the counters can be acquired with
MI_RECORD_PERF_COUNT, or a single counter can be read with
MI_STORE_REGISTER_MEM.
OAG:
- has global counters that increment across context switches
- counters are written into the circular OA buffer (if requested)
v2: Fix checkpatch warnings on code style (Lucas)
v3: (Umesh)
- Update register from which tail, status and head are read
- Update logic to sample context reports
- Update whitelist mux and b counter regs
v4: Fix a bug when updating context image for new contexts (Umesh)
v5: Squash patch enabling save/restore of counters into context image
We want this so we can preempt performance queries and keep the
system responsive even when long running queries are ongoing. We
avoid doing it for all contexts.
- use LRI to modify context control (Chris)
- use MASKED_FIELD to program just the masked bits (Chris)
- disable save/restore of counters on cleanup (Chris)
v6: Do not use implicit parameters (Chris)
BSpec: 28727, 30021
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Chris Wilson <chris.p.wilson@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025193746.47155-2-umesh.nerlige.ramappa@intel.com
|
|
We may be missing support for the mappable aperture on some platforms.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-7-matthew.auld@intel.com
|
|
Since we have no way access it from the CPU. For such cases just
fallback to internal objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-6-matthew.auld@intel.com
|
|
HWS placement restrictions can't just rely on HAS_LLC flag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-5-matthew.auld@intel.com
|
|
While processing CSB there is no need to look at GuC submission
settings, just check if engine is configured for execlists mode.
While today GuC submission is disabled it's settings are still
based on modparam values that might not correctly reflect actual
submission status in case of any fallback. Until that is fully
fixed, use alternate method to confirm that engine really runs in
execlists mode by comparing set_default_submission vfunc.
v2: add other immediate use of new helper
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028164520.31772-1-michal.wajdeczko@intel.com
|
|
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:255 live_heartbeat_fast() error: uninitialized symbol 'err'.
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:320 live_heartbeat_off() error: uninitialized symbol 'err'.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025135943.12524-2-chris@chris-wilson.co.uk
|
