summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_lvds.c
AgeCommit message (Collapse)Author
2019-01-24drm/i915/backlight: Restore backlight on resume, v3.Maarten Lankhorst
Restore our saved values for backlight. This way even with fastset on S4 resume we will correctly restore the backlight to the active values. Changes since v1: - Call enable_backlight() when backlight.level is set. On suspend backlight.enabled is always cleared, this makes it not a good indicator. Also check for crtc->state->active. Changes since v2: - Use the new update_pipe() callback to run this on resume as well. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tolga Cakir <cevelnet@gmail.com> Cc: Basil Eric Rabi <ericbasil.rabi@gmail.com> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-1-maarten.lankhorst@linux.intel.com
2019-01-24drm/i915/lvds: nuke intel_lvds_supported()Jani Nikula
Now that intel_lvds_init() is only called for platforms that might have LVDS, move the remaining checks to intel_setup_outputs(), again similar to other outputs, and remove the overlapping checks. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-3-jani.nikula@intel.com
2019-01-16drm/i915: Pass down rc in intel_encoder->compute_config()Lyude Paul
Something that I completely missed when implementing the new MST VCPI atomic helpers is that with those helpers, there's technically a chance of us having to grab additional modeset locks in ->compute_config() and furthermore, that means we have the potential to hit a normal modeset deadlock. However, because ->compute_config() only returns a bool this means we can't return -EDEADLK when we need to drop locks and try again which means we end up just failing the atomic check permanently. Whoops. So, fix this by modifying ->compute_config() to pass down an actual error code instead of a bool so that the atomic check can be restarted on modeset deadlocks. Thanks to Ville Syrjälä for pointing this out! Changes since v1: * Add some newlines * Return only -EINVAL from hsw_crt_compute_config() * Propogate return code from intel_dp_compute_dsc_params() * Change all of the intel_dp_compute_link_config*() variants * Don't miss if (hdmi_port_clock_valid()) branch in intel_hdmi_compute_config() [Cherry-picked from drm-misc-next to drm-intel-next-queued to fix linux-next & drm-tip conflict, while waiting for proper propagation of the DP MST series that this commit fixes. In hindsight, a topic branch might have been a better approach for it.] Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com (cherry picked from commit 96550555a78ca3c9fda4b358549a5622810fe32c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2019-01-14drm/i915: Markup paired operations on display power domainsChris Wilson
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk
2019-01-09drm/i915: drop all drmP.h includesJani Nikula
Needs just a few additional includes here and there. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
2018-12-12drm/i915: replace IS_GEN<N> with IS_GEN(..., N)Lucas De Marchi
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of gen_mask to do the comparison. Now callers can pass then gen as a parameter, so we don't require one macro for each gen. The following spatch was used to convert the users of these macros: @@ expression e; @@ ( - IS_GEN2(e) + IS_GEN(e, 2) | - IS_GEN3(e) + IS_GEN(e, 3) | - IS_GEN4(e) + IS_GEN(e, 4) | - IS_GEN5(e) + IS_GEN(e, 5) | - IS_GEN6(e) + IS_GEN(e, 6) | - IS_GEN7(e) + IS_GEN(e, 7) | - IS_GEN8(e) + IS_GEN(e, 8) | - IS_GEN9(e) + IS_GEN(e, 9) | - IS_GEN10(e) + IS_GEN(e, 10) | - IS_GEN11(e) + IS_GEN(e, 11) ) v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than using the bitmask Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
2018-10-15drm/i915: Introduce CRTC output formatShashank Sharma
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations. V5: - Created this separate patch to introduce and init output_format. - Initialize parameters of output_format_str respectively (Jani N). - Call it intel_output_format than crtc_output_format(Ville). - Set output format in pipe_config for every encoder (Ville). - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville) V6: Rebase V7: Fixed alignment warnings (checkpatch) V8: Another check[atch warning for alignment V9: Rebase V10: Rebase on top of DSI restructure V11: Addressed review comment from Ville - Set CRTC format for pre-HSW get_pipe_config() function too. Added Ville's R-B Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-1-git-send-email-shashank.sharma@intel.com
2018-10-10drm/i915: nuke the intel_lvds_connectorJani Nikula
For a while we carried lvds connector specific data in the lvds connector, but since commit 05c72e77ccda ("drm/i915: Nuke the LVDS lid notifier") we haven't needed it. Revert back to plain intel_connector. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009210916.19578-1-jani.nikula@intel.com
2018-10-09drm/i915: add a common connector type independent destroy hookJani Nikula
Almost all of the connector destroy functions do the same thing. The differences are in the edid, detect_edid and panel cleanups, but those are safely NULL when not initialized. Roll out a common connector destroy hook. Inspired by commit bc3213c44415 ("drm/i915: Drop the eDP check from intel_dp_connector_destroy()"). Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009141103.20387-1-jani.nikula@intel.com
2018-07-20Merge tag 'drm-intel-next-2018-07-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next On GEM side: - GuC related fixes (Chris, Michal) - GTT read-only pages support (Jon, Chris) - More selftests fixes (Chris) - More GPU reset improvements (Chris) - Flush caches after GGTT writes (Chris) - Handle recursive shrinker for vma->last_active allocation (Chris) - Other execlists fixes (Chris) On Display side: - GLK HDMI fix (Clint) - Rework and cleanup around HPD pin (Ville) - Preparation work for Display Stream Compression support coming on ICL (Anusha) - Nuke LVDS lid notification (Ville) - Assume eDP is always connected (Ville) - Kill intel panel detection (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA # Conflicts: # drivers/gpu/drm/i915/intel_lrc.c Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com
2018-07-19drm/i915: Nuke the LVDS lid notifierVille Syrjälä
We broke the LVDS notifier resume thing in (presumably) commit e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") as we no longer duplicate the current state in the LVDS notifier and thus we never resume it properly either. Instead of trying to fix it again let's just kill off the lid notifier entirely. None of the machines tested thus far have apparently needed it. Originally the lid notifier was added to work around cases where the VBIOS was clobbering some of the hardware state behind the driver's back, mostly on Thinkpads. We now have a few report of Thinkpads working just fine without the notifier. So maybe it was misdiagnosed originally, or something else has changed (ACPI video stuff perhaps?). If we do end up finding a machine where the VBIOS is still causing problems I would suggest that we first try setting various bits in the VBIOS scratch registers. There are several to choose from that may instruct the VBIOS to steer clear. With the notifier gone we'll also stop looking at the panel status in ->detect(). v2: Nuke enum modeset_restore (Rodrigo) Cc: stable@vger.kernel.org Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de> Cc: Vito Caputo <vcaputo@pengaru.com> Cc: kitsunyan <kitsunyan@airmail.cc> Cc: Joonas Saarinen <jza@saunalahti.fi> Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200 Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902 References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html References: https://bugs.freedesktop.org/show_bug.cgi?id=21230 Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-06-13drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSIVille Syrjälä
When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: stable@vger.kernel.org Cc: Vito Caputo <vcaputo@pengaru.com> Reported-by: Vito Caputo <vcaputo@pengaru.com> Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804 Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
2018-05-25drm/i915: Consult VBT "LVDS config" bits to determine whether internal LVDS ↵Ville Syrjälä
is present VBT seems to have some bits to tell us whether the internal LVDS port has something hooked up. In theory one might expect the VBT to not have a child device for the LVDS port if there's no panel hooked up, but in practice many VBTs still add the child device. The "LVDS config" bits seem more reliable though, so let's check those. So far we've used the "LVDS config" bits to check for eDP support on ILK+, and disable the internal LVDS when the value is 3. That value is actually documented as "Both internal LVDS and SDVO LVDS", but in practice it looks to mean "eDP" on all the ilk+ VBTs I've seen. So let's keep that interpretation, but for pre-ILK we will consider the value 3 to also indicate the presence of the internal LVDS. Currently we have 25 DMI matches for the "no internal LVDS" quirk. In an effort to reduce that let's toss in a WARN when the DMI match and VBT both tell us that the internal LVDS is not present. The hope is that people will report a bug, and then we can just nuke the corresponding entry from the DMI quirk list. Credits to Jani for this idea. v2: Split the basic int_lvds_support thing to a separate patch (Jani) v3: Rebase v4: Limit this to VBT version >= 134 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180518150138.18361-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2018-05-22drm/i915: Replace vbt edp.support with int_lvds_supportVille Syrjälä
Replace dev_priv->vbt.edp.support with dev_priv->vbt.int_lvds_support. We'll want to extend its use beyond the LVDS vs. eDP case in the future. v2: Nuke the edp.support from parse_edp() (Jani) Only clear int_lvds_support for gen5+ to preserve the current behaviour (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508140814.20105-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2018-05-22Revert "drm/i915/edp: Allow alternate fixed mode for eDP if available."Jani Nikula
This reverts commit dc911f5bd8aacfcf8aabd5c26c88e04c837a938e. Per the report, no matter what display mode you select with xrandr, the i915 driver will always select the alternate fixed mode. For the reporter this means that the display will always run at 40Hz which is quite annoying. This may be due to the mode comparison. But there are some other potential issues. The choice of alt_fixed_mode seems dubious. It's the first non-preferred mode, but there are no guarantees that the only difference would be refresh rate. Similarly, there may be more than one preferred mode in the probed modes list, and the commit changes the preferred mode selection to choose the last one on the list instead of the first. (Note that the probed modes list is the raw, unfiltered, unsorted list of modes from drm_add_edid_modes(), not the pretty result after a drm_helper_probe_single_connector_modes() call.) Finally, we already have eerily similar code in place to find the downclock mode for DRRS that seems like could be reused here. Back to the drawing board. Note: This is a hand-crafted revert due to conflicts. If it fails to backport, please just try reverting the original commit directly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469 Reported-by: Rune Petersen <rune@megahurts.dk> Reported-by: Mark Spencer <n7u4722r35@ynzlx.anonbox.net> Fixes: dc911f5bd8aa ("drm/i915/edp: Allow alternate fixed mode for eDP if available.") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180516080110.22770-1-jani.nikula@intel.com
2018-05-19drm/i915/lvds: Move acpi lid notification registration to registration phaseChris Wilson
Delay registering ourselves with the acpi lid notification mechanism until we are registering the connectors after initialisation is complete. This prevents a possibility of trying to handle the lid notification before we are ready with the danger of chasing uninitialised function pointers. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: (null) PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP PTI Modules linked in: arc4(+) iwldvm(+) i915(+) mac80211 i2c_algo_bit coretemp mei_wdt iwlwifi drm_kms_helper kvm_intel wmi_bmof iTCO_wdt iTCO_vendor_support kvm snd_hda_codec_conexant snd_hda_codec_generic drm psmouse cfg80211 irqbypass input_leds pcspkr i2c_i801 snd_hda_intel snd_hda_codec thinkpad_acpi snd_hda_core mei_me lpc_ich snd_hwdep e1000e wmi nvram snd_pcm mei snd_timer shpchp ptp pps_core rfkill syscopyarea snd intel_agp sysfillrect intel_gtt soundcore sysimgblt battery led_class fb_sys_fops ac rtc_cmos agpgart evdev mac_hid acpi_cpufreq ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto crypto_simd glue_helper cryptd aes_x86_64 xts algif_skcipher af_alg dm_crypt dm_mod sd_mod uas usb_storage serio_raw atkbd libps2 ahci libahci uhci_hcd libata scsi_mod ehci_pci ehci_hcd usbcore usb_common i8042 serio CPU: 1 PID: 378 Comm: systemd-logind Not tainted 4.16.8-1-ARCH #1 Hardware name: LENOVO 7454CTO/7454CTO, BIOS 6DET72WW (3.22 ) 10/25/2012 RIP: 0010: (null) RSP: 0018:ffffaf4580c33a18 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff947533558000 RCX: 000000000000003e RDX: ffffffffc0aa80c0 RSI: ffffaf4580c33a3c RDI: ffff947534e4c000 RBP: ffff947533558338 R08: ffff947534598930 R09: ffffffffc0a928b1 R10: ffffd8f181d5fd40 R11: 0000000000000000 R12: ffffffffc0a928b1 R13: ffff947533558368 R14: ffffffffc0a928a9 R15: ffff947534e4c000 FS: 00007f3dc4ddb940(0000) GS:ffff947539280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000006e214000 CR4: 00000000000406e0 Call Trace: ? intel_modeset_setup_hw_state+0x385/0xf60 [i915] ? __intel_display_resume+0x1e/0xc0 [i915] ? intel_display_resume+0xcc/0x120 [i915] ? intel_lid_notify+0xbc/0xc0 [i915] ? notifier_call_chain+0x47/0x70 ? blocking_notifier_call_chain+0x3e/0x60 ? acpi_lid_notify_state+0x8f/0x1d0 ? acpi_lid_update_state+0x49/0x70 ? acpi_lid_input_open+0x60/0x90 ? input_open_device+0x5d/0xa0 ? evdev_open+0x1ba/0x1e0 [evdev] ? chrdev_open+0xa3/0x1b0 ? cdev_put.part.0+0x20/0x20 ? do_dentry_open+0x14c/0x300 ? path_openat+0x30c/0x1240 ? current_time+0x16/0x60 ? do_filp_open+0x93/0x100 ? __check_object_size+0xfb/0x180 ? do_sys_open+0x186/0x210 ? do_syscall_64+0x74/0x190 ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Code: Bad RIP value. RIP: (null) RSP: ffffaf4580c33a18 CR2: 0000000000000000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559 Fixes: c1c7af608920 ("drm/i915: force mode set at lid open time") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org
2018-05-18drm/i915: Disable LVDS on Radiant P845Ondrej Zary
Radiant P845 does not have LVDS, only VGA. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org
2018-05-17drm/i915: Clean up LVDS pipe select bitsVille Syrjälä
Clean up the LVDS pipe select bits. To make the whole situation a bit less ugly we'll start to share the same code between .get_hw_state() and the port state asserts. v2: Order the defines shift,mask,value (Jani) Drop ruperfluous braces and whitesapce changes (Jani) Combine masks in compute_is_dual_link_lvds() (Jani) v3: Fix LVDS_PIPE_SEL_MASK_CPT Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514182827.28629-1-ville.syrjala@linux.intel.com
2018-05-04drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel logFlorent Flament
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by: Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2018-02-14drm/i915/lvds: Fixup commentaryChris Wilson
Remove the kerneldoc markup applied to non-kerneldoc comments and convert the multiline comments to the canonical style. drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-4-chris@chris-wilson.co.uk
2018-02-09drm/i915: Use INTEL_GEN everywhereTvrtko Ursulin
Coccinelle patch: @@ identifier p; @@ -INTEL_INFO(p)->gen +INTEL_GEN(p) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-12-tvrtko.ursulin@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-1-chris@chris-wilson.co.uk
2017-10-30drm/i915: Populate output_types from .get_config()Ville Syrjälä
Rather than having the caller of .get_config() set output_types based on encoder->type, let's just have .get_config() itself populate output_types. This way we are isolated from encoder->type, which won't be useable for this purpose anyway soon (at least for DDI encoders). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-11drm/i915: Allow PCH platforms fall back to BIOS LVDS modeVille Syrjälä
With intel_encoder_current_mode() using the normal state readout code it actually works on PCH platforms as well. So let's nuke the PCH check from intel_lvds_init(). I suppose there aren't any machines that actually need this, but at least we get to eliminate a few lines of code, and one FIXME. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-11drm/i915: Reuse normal state readout for LVDS/DVO fixed modeVille Syrjälä
Reuse the normal state readout code to get the fixed mode for LVDS/DVO encoders. This removes some partially duplicated state readout code from LVDS/DVO encoders. The duplicated code wasn't actually even populating the negative h/vsync flags, leading to possible state checker complaints. The normal readout code populates that stuff fully. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-09-22drm/i915: Rename global i915 to i915_modparamsMichal Wajdeczko
Our global struct with params is named exactly the same way as new preferred name for the drm_i915_private function parameter. To avoid such name reuse lets use different name for the global. v5: pure rename v6: fix Credits-to: Coccinelle @@ identifier n; @@ ( - i915.n + i915_modparams.n ) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
2017-08-22drm/i915: Constify states passed to enable/disable/etc. encoder hooksVille Syrjälä
The enable/disable/etc. encoder hooks aren't supposed to alter the state(s), so pass them as const. Unfortunately C lacks any kind of deep const thingy, so this can't catch all abuses. But at least it acts as a hint to the reader telling them not to mess about with the state(s). v2: Update intel_tv_mode_find() and ironlake_edp_pll_on() as well v3: Deal with intel_sdvo_connector_state Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-9-ville.syrjala@linux.intel.com
2017-08-15drm/i915/edp: Allow alternate fixed mode for eDP if available.Jim Bride
Some fixed resolution panels actually support more than one mode, with the only thing different being the refresh rate. Having this alternate mode available to us is desirable, because it allows us to test PSR on panels whose setup time at the preferred mode is too long. With this patch we allow the use of the alternate mode if it's available and it was specifically requested. v2 and v3: Rebase v4: * Fix up some leaky mode stuff (Chris) * Rebase v5: * Fix a NULL pointer derefrence (David Weinehall) v6: * Whitespace / spelling / checkpatch clean-up; no functional change. (David) * Rebase Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502308133-26892-1-git-send-email-jim.bride@linux.intel.com
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-08drm: Nuke drm_atomic_helper_connector_set_propertyDaniel Vetter
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-06-12drm/i915: Pass crtc_state and connector state to backlight enable/disable ↵Maarten Lankhorst
functions The backlight functions need to determine the pipe and the transcoder the backlight will be enabled on, so pass crtc_state instead of trying to dereference the state without holding locks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100022 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170612102115.23665-2-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-05-30drm/i915: Convert LVDS connector properties to atomic.Maarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-8-maarten.lankhorst@linux.intel.com
2017-05-30drm/i915: Use per-connector scaling mode propertyMaarten Lankhorst
None of the intel connectors can use all types of scaling modes, so only try the ones that are possible. This is another preparation for connectors towards conversion to atomic. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-5-maarten.lankhorst@linux.intel.com [mlankhorst: Use renamed drm_connector_attach_scaling_mode_property function]
2017-05-30drm/i915: Use atomic scaling_mode instead of panel.fitting_modeMaarten Lankhorst
The first step in converting connector properties to atomic is wiring up the atomic state. We're still not completely supoprting the scaling mode in the atomic case, but this is the first step towards it. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-4-maarten.lankhorst@linux.intel.com
2017-02-27drm/i915: Store encoder power domain in struct intel_encoderAnder Conselvan de Oliveira
The encoder power domain is obviously tied to the encoder, so store it in struct intel_encoder. This avoids some indirection. v2: Rebase Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-3-ander.conselvan.de.oliveira@intel.com
2016-12-13drm/i915: Intel panel detection cleanupMika Kahola
Let's switch to use private dev_priv instead of dev when detecting intel panels. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-2-git-send-email-mika.kahola@intel.com
2016-11-25drm/i915: Pass dev_priv to intel_setup_outputs()Ander Conselvan de Oliveira
Pass dev_priv to intel_setup_outputs() and functions called by it, since those are all intel i915 specific functions. Also, in the majority of the functions dev_priv is used more often than dev. In the rare cases where there are a few calls back into drm core, a local dev variable was added. v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-11-17drm/i915: Assorted INTEL_INFO(dev) cleanupsTvrtko Ursulin
A bunch of source files with just a few instances of the incorrect INTEL_INFO use. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-01drm/i915: Pass dev_priv to intel_get_crtc_for_pipe()Ville Syrjälä
Unify our approach to things by passing around dev_priv instead of dev. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-11-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-01drm/i915: Store struct intel_crtc * in {pipe,plane}_to_crtc_mapping[]Ville Syrjälä
A lot of users of the {pipe,plane}_to_crtc_mapping[] will end up casting the result to intel_crtc, so let's just store the intel_crtc pointer in the first place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-7-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-10-14drm/i915: Make IS_GEN macros only take dev_privTvrtko Ursulin
Saves 1416 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476352990-2504-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-10-14drm/i915: Make INTEL_DEVID only take dev_privTvrtko Ursulin
Saves 4472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_PCH_TYPE & co only take dev_privTvrtko Ursulin
This saves 1872 bytes of .rodata strings. v2: * Rebase. * Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-12Merge tag 'drm-for-v4.9' into drm-intel-next-queuedDaniel Vetter
It's been over two months, git definitely lost it's marbles. Conflicts resolved by picking our version, plus manually checking the diff with the parent in drm-intel-next-queued to make sure git didn't do anything stupid. It did, so I removed 2 occasions where it double-inserted a bit of code. The diff is now just - kernel-doc changes - drm format/name changes - display-info changes so looks all reasonable. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-09-21drm/i915: Store port enum in intel_encoderPandiyan, Dhinakaran
Storing the port enum in intel_encoder makes it convenient to know the port attached to an encoder. Moving the port information up from intel_digital_port to intel_encoder avoids unecessary intel_digital_port access and handles MST encoders cleanly without requiring conditional checks for them (thanks danvet). v2: Renamed the port enum member from 'attached_port' to 'port' (danvet) Fixed missing initialization of port in intel_sdvo.c (danvet) v3: Fixed missing initialization of port in intel_crt.c (Ville) v4: Storing port for DVO encoders too. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lyude <cpaul@redhat.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-3-git-send-email-dhinakaran.pandiyan@intel.com
2016-09-20Merge tag 'drm-intel-next-2016-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - refactor the sseu code (Imre) - refine guc dmesg output (Dave Gordon) - more vgpu work - more skl wm fixes (Lyude) - refactor dpll code in prep for upfront link training (Jim Bride et al) - consolidate all platform feature checks into intel_device_info (Carlos Santa) - refactor elsp/execlist submission as prep for re-submission after hang recovery and eventually scheduling (Chris Wilson) - allow synchronous gpu reset handling, to remove tricky/impossible/fragile error recovery code (Chris Wilson) - prep work for nonblocking (execlist) submission, using fences to track depencies and drive elsp submission (Chris Wilson) - partial error recover/resubmission of non-guilty batches after hangs (Chris Wilson) - full dma-buf implicit fencing support (Chris Wilson) - dp link training fixes (Jim, Dhinkaran, Navare, ...) - obey dp branch device pixel rate/bpc/clock limits (Mika Kahola), needed for many vga dongles - bunch of small cleanups and polish all over, as usual [airlied: printing macros collided] * tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel: (163 commits) drm/i915: Update DRIVER_DATE to 20160919 drm: Fix DisplayPort branch device ID kernel-doc drm/i915: use NULL for NULL pointers drm/i915: do not use 'false' as a NULL pointer drm/i915: make intel_dp_compute_bpp static drm: Add DP branch device info on debugfs drm/i915: Update bits per component for display info drm/i915: Check pixel rate for DP to VGA dongle drm/i915: Read DP branch device SW revision drm/i915: Read DP branch device HW revision drm/i915: Cleanup DisplayPort AUX channel initialization drm: Read DP branch device id drm: Helper to read max bits per component drm: Helper to read max clock rate drm: Drop VGA from bpc definitions drm: Add missing DP downstream port types drm/i915: Add ddb size field to device info structure drm/i915/guc: general tidying up (submission) drm/i915/guc: general tidying up (loader) drm/i915: clarify PMINTRMSK/pm_intr_keep usage ...
2016-08-25Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel ↵Dave Airlie
into drm-next drm-intel-next-2016-08-22: - bugfixes and cleanups for rcu-protected requests (Chris) - atomic modeset fixes for gpu reset on pre-g4x (Maarten&Ville) - guc submission improvements (Dave Gordon) - panel power sequence cleanup (Imre) - better use of stolen and unmappable ggtt (Chris), plus prep work to make that happen - rework of framebuffer offsets, prep for multi-plane framebuffers (Ville) - fully partial ggtt vmaps, including fenced ones (Chris) - move lots more of the gem tracking from the object to the vma (Chris) - tune the command parser (Chris) - allow fbc without fences on recent platforms (Chris) - fbc frontbuffer tracking fixes (Chris) - fast prefaulting using io-mappping.h pgprot caching (Chris) * 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (141 commits) io-mapping: Fixup for different names of writecombine io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/ drm/i915: Update DRIVER_DATE to 20160822 drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass drm/i915: Embed the io-mapping struct inside drm_i915_private io-mapping: Always create a struct to hold metadata about the io-mapping drm/i915/fbc: Allow on unfenced surfaces, for recent gen drm/i915/fbc: Don't set an illegal fence if unfenced drm/i915: Flush delayed fence releases after reset drm/i915: Reattach comment, complete type specification drm/i915/cmdparser: Accelerate copies from WC memory drm/i915/cmdparser: Use binary search for faster register lookup drm/i915/cmdparser: Check for SKIP descriptors first drm/i915/cmdparser: Compare against the previous command descriptor drm/i915/cmdparser: Improve hash function drm/i915/cmdparser: Only cache the dst vmap drm/i915/cmdparser: Use cached vmappings drm/i915/cmdparser: Add the TIMESTAMP register for the other engines drm/i915/cmdparser: Make initialisation failure non-fatal drm/i915: Stop discarding GTT cache-domain on unbind vma ...
2016-08-23drm/i915: Convert intel_lvds to use atomic stateMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-13-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [mlankhorst: Small fixup wrt register renames.]
2016-08-23drm/i915: Make encoder->compute_config take the connector stateMaarten Lankhorst
Some places iterate over connector_state to find the right connector, pass it along as argument. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-7-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-23drm/i915: Pass crtc_state and connector_state to encoder functionsMaarten Lankhorst
This is mostly code churn, with exception of a few places: - intel_display.c has changes in intel_sanitize_encoder - intel_ddi.c has intel_ddi_fdi_disable calling intel_ddi_post_disable, and required a function change. Also affects intel_display.c - intel_dp_mst.c passes a NULL crtc_state and conn_state to intel_ddi_post_disable for shutting down the real encoder. If we would pass conn_state, then conn_state->connector != intel_dig_port->connector and conn_state->best_encoder != to_intel_encoder(intel_dig_port). We also shouldn't pass crtc_state, because in that case the disabling sequence may potentially be different depending on which crtc is disabled last. Nice way to introduce bugs. No other functional changes are done, diff stat is already huge. Each encoder type will need to be fixed to use the atomic states separately. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-6-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 03:55:56 +0000