summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2012-01-13nouveau: Support Optimus models for vga_switcherooPeter Lekensteyn
Newer nVidia cards with Optimus do not support/use the DSM switching functions. Instead, it require a DSM function to be called prior to bringing a device into D3 state. No other _DSM calls are necessary before/after enabling/disabling a device. Switching between discrete and integrated GPU is not supported by this Optimus _DSM call, therefore return on the switching method. Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13nouveau: properly check for _DSM function supportPeter Lekensteyn
According to the ACPI spec version 4, section 9.14.1, _DSM functions must return a value with the first bit enabled if any DSM functions are supported for the given UUID and revision ID. For a given function index n to be marked supported, bit n must be enabled. Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13radeon: Call pci_clear_master() instead of open-coding it.Michel Dänzer
Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13gma500: Discard modes that don't fit in stolen memoryAlan Cox
[This fixes a crash on boot if the system is plugged into an HDTV so it's probably appropriate to push even though it didn't make the window. We could be cleverer about this but the simple version seems to be the safe one] From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> At the moment we cannot allocate more than stolen memory size for framebuffers. To get around that issues we discard modes that doesn't fit. This is a temporary solution until we can freely allocate framebuffer memory. [Currently the framebuffer needs to be linear in kernel space due to limits in the kernel fb layer - AC] Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13drm/radeon/kms: Fix module parameter description formatJean Delvare
Module parameter descriptions don't take a trailing \n, otherwise it breaks formatting of modinfo's output. Also add missing space after comma. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Airlie <airlied@linux.ie> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13drm/radeon/kms/ni: fix packet2 handling for VM IB parserAlex Deucher
Packet2 is only one dword. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13ttm/dma: Remove the WARN() which is not useful.Konrad Rzeszutek Wilk
. It was useful during development, but now on a production system we can get this (if the user forgot to upload the firmware): [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration 88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]() Hardware name: System Product Name Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a89 #1 Call Trace: [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm] [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon] [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm] [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm] [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm] [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm] [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon] [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon] [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon] [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon] [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon] The big WARN() has nothing to do with the culprit - which is that the firmware was not loaded. So lets remove the WARN() from the TTM DMA code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-10Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (307 commits) drm/nouveau/pm: fix build with HWMON off gma500: silence gcc warnings in mid_get_vbt_data() drm/ttm: fix condition (and vs or) drm/radeon: double lock typo in radeon_vm_bo_rmv() drm/radeon: use after free in radeon_vm_bo_add() drm/sis|via: don't return stack garbage from free_mem ioctl drm/radeon/kms: remove pointless CS flags priority struct drm/radeon/kms: check if vm is supported in VA ioctl drm: introduce drm_can_sleep and use in intel/radeon drivers. (v2) radeon: Fix disabling PCI bus mastering on big endian hosts. ttm: fix agp since ttm tt rework agp: Fix multi-line warning message whitespace drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and don't try to free freed pages. drm/ttm/dma: Only call set_pages_array_wb when the page is not in WB pool. drm/radeon/kms: sync across multiple rings when doing bo moves v3 drm/radeon/kms: Add support for multi-ring sync in CS ioctl (v2) drm/radeon: GPU virtual memory support v22 drm: make DRM_UNLOCKED ioctls with their own mutex drm: no need to hold global mutex for static data drm/radeon/benchmark: common modes sweep ignores 640x480@32 ... Fix up trivial conflicts in radeon/evergreen.c and vmwgfx/vmwgfx_kms.c
2012-01-10drm/nouveau/pm: fix build with HWMON offDave Airlie
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-10gma500: silence gcc warnings in mid_get_vbt_data()Dan Carpenter
Add a cast here to silence a Gcc warning. drivers/gpu/drm/gma500/mid_bios.c:214:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-10drm/ttm: fix condition (and vs or)Dan Carpenter
The "if (!p && !p->dev)" condition isn't right because || was intended instead of &&. But actually, "p" is the list cursor and so it's always non-NULL and we can just remove that bit. We can remove the another similar check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/radeon: double lock typo in radeon_vm_bo_rmv()Dan Carpenter
The second lock should be an unlock or it causes a deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/radeon: use after free in radeon_vm_bo_add()Dan Carpenter
"bo_va" is dereferenced in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/sis|via: don't return stack garbage from free_mem ioctlDaniel Vetter
Fallout from my "kill drm_sman" refactor. Unfortunately gcc seems to have failed me and not warned about this. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> (on via) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/radeon/kms: check if vm is supported in VA ioctlAlex Deucher
Add a VM manager enabled field and use it to check if vm is enabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: jglisse@redhat.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-06drm: introduce drm_can_sleep and use in intel/radeon drivers. (v2)Dave Airlie
So we have a few places where the drm drivers would like to sleep to be nice to the system, mainly in the modesetting paths, but we also have two cases were atomic modesetting must take place, panic writing and kernel debugger. So provide a central inline to determine if a sleep or delay should be used and use this in the intel and radeon drivers. v2: drop intel_drv.h MSLEEP macro, nobody uses it. Based on patch from Michel Dänzer <michel.daenzer@amd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43941 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06radeon: Fix disabling PCI bus mastering on big endian hosts.Michel Dänzer
It would previously write basically random bits to PCI configuration space... Not very surprising that the GPU tended to stop responding completely. The resulting MCE even froze the whole machine sometimes. Now resetting the GPU after a lockup has at least a fighting chance of succeeding. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06ttm: fix agp since ttm tt reworkJerome Glisse
ttm tt rework modified the way we allocate and populate the ttm_tt structure, the AGP side was missing some bit to properly work. Fix those and fix radeon and nouveau AGP support. Tested on radeon only so far. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and ↵Konrad Rzeszutek Wilk
don't try to free freed pages. The code to figure out how many pages to shrink the pool ends up capping the 'count' at _manager->options.max_size - which is OK. Except that the 'count' is also used when accounting for how many pages are recycled - which we end up with the invalid values. This fixes it by using a different value for the amount of pages to shrink. On top of that we would free the cached page pool - which is nonsense as they are deleted from the pool - so there are no free pages in that pool.. Also we also missed the opportunity to batch the amount of pages to free (similar to how ttm_page_alloc.c does it). This reintroduces the code that was lost during rebasing. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06drm/ttm/dma: Only call set_pages_array_wb when the page is not in WB pool.Konrad Rzeszutek Wilk
Otherwise we are doing redundant work. Especially since the 'unbind' and 'unpopulate' have been merged and nouveau driver ends up calling it quite excessivly. On a GeForce 8600 GT with Gnome Shell (GNOME 3) we end up spending about 54% CPU time in __change_page_attr_set_clr checking the page flags. The callgraph (annotated) looks as so before this patch: 53.29% gnome-shell [kernel.kallsyms] [k] static_protections | --- static_protections | |--91.80%-- __change_page_attr_set_clr | change_page_attr_set_clr | set_pages_array_wb | | | |--96.55%-- ttm_dma_unpopulate | | nouveau_ttm_tt_unpopulate | | ttm_tt_destroy | | ttm_bo_cleanup_memtype_use | | ttm_bo_release | | kref_put | | ttm_bo_unref | | nouveau_gem_object_del | | drm_gem_object_free | | kref_put | | drm_gem_object_unreference_unlocked | | drm_gem_object_handle_unreference_unlocked.part.1 | | drm_gem_handle_delete | | drm_gem_close_ioctl | | drm_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call_fastpath | | __GI___ioctl | | | --3.45%-- ttm_dma_pages_put | ttm_dma_page_pool_free | ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --8.20%-- change_page_attr_set_clr set_pages_array_wb | |--93.76%-- ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --6.24%-- ttm_dma_pages_put ttm_dma_page_pool_free ttm_dma_unpopulate nouveau_ttm_tt_unpopulate ttm_tt_destroy ttm_bo_cleanup_memtype_use ttm_bo_release kref_put ttm_bo_unref nouveau_gem_object_del drm_gem_object_free kref_put drm_gem_object_unreference_unlocked drm_gem_object_handle_unreference_unlocked.part.1 drm_gem_handle_delete drm_gem_close_ioctl drm_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath __GI___ioctl and after this patch all of that disappears. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06drm/radeon/kms: sync across multiple rings when doing bo moves v3Alex Deucher
We need to synchronize across rings when doing a bo move to make sure we the buffer is idle if it's in use by a different ring than the ring doing the move. v2: fix fence setup for bo moves v3: add missing ring lock/unlock Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06drm/radeon/kms: Add support for multi-ring sync in CS ioctl (v2)Christian König
Use semaphores to sync buffers across rings in the CS ioctl. Add a reloc flag to allow userspace to skip sync for buffers. agd5f: port to latest CS ioctl changes. v2: add ring lock/unlock to make sure changes hit the ring. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06drm/radeon: GPU virtual memory support v22Jerome Glisse
Virtual address space are per drm client (opener of /dev/drm). Client are in charge of virtual address space, they need to map bo into it by calling DRM_RADEON_GEM_VA ioctl. First 16M of virtual address space is reserved by the kernel. Once using 2 level page table we should be able to have a small vram memory footprint for each pt (there would be one pt for all gart, one for all vram and then one first level for each virtual address space). Plan include using the sub allocator for a common vm page table area and using memcpy to copy vm page table in & out. Or use a gart object and copy things in & out using dma. v2: agd5f fixes: - Add vram base offset for vram pages. The GPU physical address of a vram page is FB_OFFSET + page offset. FB_OFFSET is 0 on discrete cards and the physical bus address of the stolen memory on integrated chips. - VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR covers all vmid's >= 1 v3: agd5f: - integrate with the semaphore/multi-ring stuff v4: - rebase on top ttm dma & multi-ring stuff - userspace is now in charge of the address space - no more specific cs vm ioctl, instead cs ioctl has a new chunk v5: - properly handle mem == NULL case from move_notify callback - fix the vm cleanup path v6: - fix update of page table to only happen on valid mem placement v7: - add tlb flush for each vm context - add flags to define mapping property (readable, writeable, snooped) - make ring id implicit from ib->fence->ring, up to each asic callback to then do ring specific scheduling if vm ib scheduling function v8: - add query for ib limit and kernel reserved virtual space - rename vm->size to max_pfn (maximum number of page) - update gem_va ioctl to also allow unmap operation - bump kernel version to allow userspace to query for vm support v9: - rebuild page table only when bind and incrementaly depending on bo referenced by cs and that have been moved - allow virtual address space to grow - use sa allocator for vram page table - return invalid when querying vm limit on non cayman GPU - dump vm fault register on lockup v10: agd5f: - Move the vm schedule_ib callback to a standalone function, remove the callback and use the existing ib_execute callback for VM IBs. v11: - rebase on top of lastest Linus v12: agd5f: - remove spurious backslash - set IB vm_id to 0 in radeon_ib_get() v13: agd5f: - fix handling of RADEON_CHUNK_ID_FLAGS v14: - fix va destruction - fix suspend resume - forbid bo to have several different va in same vm v15: - rebase v16: - cleanup left over of vm init/fini v17: agd5f: - cs checker v18: agd5f: - reworks the CS ioctl to better support multiple rings and VM. Rather than adding a new chunk id for VM, just re-use the IB chunk id and add a new flags for VM mode. Also define additional dwords for the flags chunk id to define the what ring we want to use (gfx, compute, uvd, etc.) and the priority. v19: - fix cs fini in weird case of no ib - semi working flush fix for ni - rebase on top of sa allocator changes v20: agd5f: - further CS ioctl cleanups from Christian's comments v21: agd5f: - integrate CS checker improvements v22: agd5f: - final cleanups for release, only allow VM CS on cayman Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: make DRM_UNLOCKED ioctls with their own mutexIlija Hadzic
drm_getclient, drm_getstats and drm_getmap (with a few minor adjustments) do not need global mutex, so fix that and make the said ioctls DRM_UNLOCKED. Details: drm_getclient: the only thing that should be protected here is dev->filelist and that is already protected everywhere with dev->struct_mutex. drm_getstats: there is no need for any mutex here because the loop runs through quasi-static (set at load time only) data, and the actual count access is done with atomic_read() drm_getmap already uses dev->struct_mutex to protect dev->maplist, which also used to protect the same structure everywhere else except at three places: * drm_getsarea, which doesn't grab *any* mutex before touching dev->maplist (so no drm_global_mutex doesn't help here either; different issue for a different patch). However, drivers seem to call it only at initialization time so it probably doesn't matter * drm_master_destroy, which is called from drm_master_put, which in turn is protected with dev->struct_mutex everywhere else in drm module, so we are good here too. * drm_getsareactx, which releases the dev->struct_mutex too early, but this patch includes the fix for that. v2: * incorporate comments received from Daniel Vetter * include the (long) explanation above to make it clear what we are doing (and why), also at Daniel Vetter's request * tighten up mutex grab/release locations to only encompass real critical sections, rather than some random code around them Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: no need to hold global mutex for static dataIlija Hadzic
drm_getcap and drm_version ioctls only reads static data, there is no need to protect them with drm_global_mutex, so make them DRM_UNLOCKED Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon/benchmark: common modes sweep ignores 640x480@32Chen Jie
Sweep common_modes array should start with index 0. Signed-off-by: Chen Jie <chenj@lemote.com> Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon/kms: disable writeback on pre-R300 asicsAlex Deucher
We often end up missing fences on older asics with writeback enabled which leads to delays in the userspace accel code, so just disable it by default on those asics. Reported-by: Helge Deller <deller@gmx.de> Reported-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon: allocate semaphore from the ib poolJerome Glisse
This allow to share the ib pool with semaphore and avoid having more bo around. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon: make ib size variableJerome Glisse
This avoid to waste ib pool size and avoid a bunch of wait for previous ib to finish. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon/kms: add missing ring ready check in sync testsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: add support for private planesRob Clark
In cases where the scanout hw is sufficiently similar between "overlay" and traditional crtc layers, it might be convenient to allow the driver to create internal drm_plane helper objects used by the drm_crtc implementation, rather than duplicate code between the plane and crtc. A private plane is not exposed to userspace. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: disconnect plane from fb/crtc when disabledRob Clark
Since plane->fb and plane->crtc are set in drm_mode_setplane() after update_plane(), They should be cleared after disable(). Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03drm/i915: only set the intel_crtc DPMS mode to on if the mode set succeededJesse Barnes
If it failed, leave it in the "off" state. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: don't disable a PCH DPLL that's in useJesse Barnes
If a PCH pipe PLL is being used by transcoder C, don't disable it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: don't bail out of intel_wait_ring_buffer too earlyDaniel Vetter
In the pre-gem days with non-existing hangcheck and gpu reset code, this timeout of 3 seconds was pretty important to avoid stuck processes. But now we have the hangcheck code in gem that goes to great length to ensure that the gpu is really dead before declaring it wedged. So there's no need for this timeout anymore. Actually it's even harmful because we can bail out too early (e.g. with xscreensaver slip) when running giant batchbuffers. And our code isn't robust enough to properly unroll any state-changes, we pretty much rely on the gpu reset code cleaning up the mess (like cache tracking, fencing state, active list/request tracking, ...). With this change intel_begin_ring can only fail when the gpu is wedged, and it will return -EAGAIN (like wait_request in case the gpu reset is still outstanding). v2: Chris Wilson noted that on resume timers aren't running and hence we won't ever get kicked out of this loop by the hangcheck code. Use an insanely large timeout instead for the HAS_GEM case to prevent resume bugs from totally hanging the machine. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: kicking rings stuck on semaphores considered harmfulDaniel Vetter
If our semaphore logic gets confused and we have a ring stuck waiting for one, there's a decent chance it'll just execute garbage when being kicked. Also, kicking the ring obscures the place where the error first occured, making error_state decoding much harder. So drop this an let gpu reset handle this mess in a clean fashion. In contrast, kicking rings stuck on MI_WAIT is rather harmless, at worst there'll be a bit of screen-flickering. There's also old broken userspace out there which needs this as a work-around. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@hchris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Add support for resetting the SO write pointers on gen7.Eric Anholt
These registers are automatically incremented by the hardware during transform feedback to track where the next streamed vertex output should go. Unlike the previous generation, which had a packet for setting the corresponding registers to a defined value, gen7 only has MI_LOAD_REGISTER_IMM to do so. That's a secure packet (since it loads an arbitrary register), so we need to do it from the kernel, and it needs to be settable atomically with the batchbuffer execution so that two clients doing transform feedback don't stomp on each others' state. Instead of building a more complicated interface involcing setting the registers to a specific value, just set them to 0 when asked and userland can tweak its pointers accordingly. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Make the fallback IRQ wait not sleep.Eric Anholt
The waits we do here are generally so short that sleeping is a bad idea unless we have an IRQ to wake us up. Improves regression test performance from 18 minutes to 3.5 minutes on gen7, which is now consistent with the previous generation. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Work around gen7 BLT ring synchronization issues.Eric Anholt
Previous to this commit, testing easily reproduced a failure where the seqno would apparently arrive after the IRQ associated with it, with test programs as simple as: for (;;) { glCopyPixels(0, 0, 1, 1); glFinish(); } Various workarounds we've seen for previous generations didn't work to fix this issue, so until new information comes in, replace the IRQ waits on the BLT ring with polling. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Do the fallback non-IRQ wait in ring throttle, too.Eric Anholt
As a workaround for IRQ synchronization issues in the gen7 BLT ring, we want to turn the two wait functions into polling loops. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Set two chicken bits implicated in missed IRQs on Ivybridge.Eric Anholt
They don't fix our problems alone, but we're told to set them. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: add color key support v4Jesse Barnes
Add new ioctls for getting and setting the current destination color key. This allows for simple overlay display control by matching a color key value in the primary plane before blending the overlay on top. v2: remove unnecessary mutex acquire/release around reg accesses v3: add support for full color key management v4: fix copy & paste bug in snb_get_colorkey don't bother checking min/max values against docs as the docs are likely wrong (how could we handle 10bpc surface formats?) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-03drm/i915: track sprite coverage and disable primary plane if possibleJesse Barnes
To save power when the sprite is full screen, we can disable the primary plane on the same pipe. Track the sprite status and enable/disable the primary opportunistically. v2: remove primary plane enable/disable hooks; they're identical Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: add SNB and IVB video sprite support v6Jesse Barnes
The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Clean up multi-threaded forcewake patchKeith Packard
We learned that the ECOBUS register was inside the GT power well, and so *did* need force wake to be read, so it gets removed from the list of 'doesn't need force wake' registers. That means the code reading ECOBUS after forcing the mt_force_wake function to be called needs to use I915_READ_NOTRACE; it doesn't need to do more force wake fun as it's already done it manually. This also adds a comment explaining why the MT forcewake testing code only needs to call mt_forcewake_get/put and not disable RC6 manually -- the ECOBUS read will return 0 if the device is in RC6 and isn't using MT forcewake, causing the test to work correctly. Signed-off-by: Keith Packard <keithp@keithp.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-03drm/i915: drpc debugfs update for gen6Ben Widawsky
Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Update GEN6_RP_CONTROL definitionsBen Widawsky
This matches the modern specs more accurately. This will be used by the following patch to fix the way we display RC status. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: Force sync command ordering (Gen6+)Ben Widawsky
The docs say this is required for Gen7, and since the bit was added for Gen6, we are also setting it there pit pf paranoia. Particularly as Chris points out, if PIPE_CONTROL counts as a 3d state packet. This was found through doc inspection by Ken and applies to Gen6+; Reported-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com>