summaryrefslogtreecommitdiff
path: root/drivers/hwtracing
AgeCommit message (Collapse)Author
2017-12-04tracing: Pass export pointer as argument to ->write()Felipe Balbi
By passing an export descriptor to the write function, users don't need to keep a global static pointer and can rely on container_of() to fetch their own structure. Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-14Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20coresight: Extend the PIDR mask to cover relevant bits in PIDR2Suzuki K Poulose
As per coresight standards, PIDR2 register has the following format : [2-0] - JEP106_bits6to4 [3] - JEDEC, designer ID is specified by JEDEC. However some of the drivers only use mask of 0x3 for the PIDR2 leaving bits [3-2] unchecked, which could potentially match the component for a different device altogether. This patch fixes the mask and the corresponding id bits for the existing devices. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19stm class: make config_item_type constBhumika Goyal
Make config_item_type structures const as they are either passed to a function having the argument as const or used inside a if statement or stored in the const "ci_type" field of a config_item structure. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-09-22intel_th: pci: Add Lewisburg PCH supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Lewisburg PCH. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22intel_th: pci: Add Cedar Fork PCH supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Cedar Fork PCH. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22stm class: Fix a use-after-freeAlexander Shishkin
For reasons unknown, the stm_source removal path uses device_destroy() to kill the underlying device object. Because device_destroy() uses devt to look for the device to destroy and the fact that stm_source devices don't have one (or all have the same one), it just picks the first device in the class, which may well be the wrong one. That is, loading stm_console and stm_heartbeat and then removing both will die in dereferencing a freed object. Since this should have been device_unregister() in the first place, use it instead of device_destroy(). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2 ("stm class: Introduce an abstraction for System Trace Module devices") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28Merge tag 'stm-for-greg-20170825' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next Alexander writes: stm class / intel_th: Updates for 4.14 Intel TH: * Updated subdevice management code to better fit host mode * Added support for Low Power Path (LPP) output type * Fixed memory allocation with IOMMU enabled (DMAR tables) * Added Cannon Lake PCH PCI IDs * Added a quirk to force time sync on devices that need it STM: * Fixed potential read overflow in ioctl() * Documented stm_ftrace source.
2017-08-28coresight: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etb10: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm3x: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm4x: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: funnel: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: replicator: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: stm: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: tmc: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: tpiu: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: STM: Clean up __iomem type usageStephen Boyd
The casting and other things here is odd, and causes sparse to complain: drivers/hwtracing/coresight/coresight-stm.c:279:35: warning: incorrect type in argument 1 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:279:35: expected void [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:279:35: got struct stm_drvdata *drvdata drivers/hwtracing/coresight/coresight-stm.c:327:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:327:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:327:17: got void *addr drivers/hwtracing/coresight/coresight-stm.c:330:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:330:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:330:17: got void *addr drivers/hwtracing/coresight/coresight-stm.c:333:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:333:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:333:17: got void *addr >From what I can tell, we don't really need to treat ch_addr as anything besides a pointer, and we can just do pointer math instead of ORing in the bits of the offset and achieve the same thing. Also, we were passing a drvdata pointer to the coresight_timeout() function, but we really wanted to pass the address of the register base. Luckily the base is the first member of the structure, so everything works out, but this is quite unsafe if we ever change the structure layout. Clean this all up so sparse stops complaining on this code. Reported-by: Satyajit Desai <sadesai@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add support for Coresight SoC 600 componentsSuzuki K Poulose
Add the peripheral ids for the Coresight SoC 600 TPIU, replicator and funnel. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Add support for Coresight SoC 600 TMCSuzuki K Poulose
The coresight SoC 600 supports ETR save-restore which allows us to restore a trace session by retaining the RRP/RWP/STS.Full values when the TMC leaves the Disabled state. However, the TMC doesn't have a scatter-gather unit in built. Also, TMCs have different PIDs in different configurations (ETF, ETB & ETR), unlike the previous generation. While the DEVID exposes some of the features/changes in the TMC, it doesn't explicitly advertises the new save-restore feature as described above. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Support for save-restore in ETRSuzuki K Poulose
The Coresight SoC 600 TMC ETR supports save-restore feature, where the values of the RRP/RWP and STS.Full are retained when it leaves the Disabled state. Hence, we must program the RRP/RWP and STS.Full to a proper value. For now, set the RRP/RWP to the base address of the buffer and clear the STS.Full register. This can be later exploited for proper save-restore of ETR trace contexts (e.g, perf). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc etr: Setup AXI cache encoding for read transfersSuzuki K Poulose
If the ETR supports split cache encoding (i.e, separate bits for read and write transfers) unlike the older version (where read and write transfers use the same encoding in AXICTL[2-5]). This feature is not advertised and has to be described by the static mask associated with the device id. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc etr: Cleanup AXICTL register handlingSuzuki K Poulose
This patch cleans up how we setup the AXICTL register on TMC ETR. At the moment we don't set the CacheCtrl bits, which drives the arcache and awcache bits on AXI bus specifying the cacheablitiy. Set this to Write-back Read and Write-allocate. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc etr: Detect address width at runtimeSuzuki K Poulose
TMC in Coresight SoC-600 advertises the AXI address width in the device configuration register. Bit 16 - AXIAW_VALID 0 - AXI Address Width not valid 1 - Valid AXI Address width in Bits[23-17] Bits [23-17] - AXIAW. If AXIAW_VALID = b01 then 0x20 - 32bit AXI address bus 0x28 - 40bit AXI address bus 0x2c - 44bit AXI address bus 0x30 - 48bit AXI address bus 0x34 - 52bit AXI address bus Use the address bits from the device configuration register, if available. Otherwise, default to 40bit. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Detect support for scatter gatherSuzuki K Poulose
The SG unit in the TMC has been removed in Coresight SoC-600. This is however advertised by DEVID:Bit 24 = 0b1. On the previous generation, the bit is RES0, hence we can rely on the DEVID to detect the support. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc etr: Add capabilitiy informationSuzuki K Poulose
With new version of TMC ETR, there are differing set of features supported by the TMC. Add the capability of a given TMC ETR for making safer decisions at runtime. The device configuration register of the TMC (DEVID) lists some of the capabilities. So, we can detect some of them at probe. However, some of the features (or changes in behavior) are not advertised and we have to depend on the PID to infer the features. So we use a static description of the "unadvertised" capabilities attached to the PID. Combining both, the static and the dynamic capabilities, we maintain a bitmask of the available features which can be later checked to take appropriate actions. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Handle configuration types properlySuzuki K Poulose
Coresight SoC 600 defines a new configuration for TMC, Embedded Trace Streamer (ETS), indicated by 0x3 in MODE:CONFIG_TYPE. This would break the existing driver which will treat anything other than ETR/ETB as an ETF. Fix the driver to check the configuration type properly and also add a warning if we encounter an unsupported configuration (ETS). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight replicator: Expose replicator management registersSuzuki K Poulose
Expose the idfilter* registers of the programmable replicator. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Expose DBA and AXICTLSuzuki K Poulose
Expose DBALO,DBAHI and AXICTL registers Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Add helpers for accessing 64bit registersSuzuki K Poulose
Coresight TMC splits 64bit registers into a pair of 32bit registers (e.g DBA, RRP, RWP). Provide helpers to read/write to these registers. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Use the new helper for defining registersSuzuki K Poulose
Use the new helpers for exposing coresight component registers, choosing the 64bit variants for appropriate registers. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add support for reading 64bit registersSuzuki K Poulose
Add support for reading a lower and upper 32bits of a register as a single 64bit register. Also add simplified macros for direct register accesses. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight replicator: Cleanup programmable replicator namingSuzuki K Poulose
The Linux coresight drivers define the programmable ATB replicator as Qualcomm replicator, while this is designed by ARM. This can cause confusion to a user selecting the driver. Cleanup all references to make it explicitly clear. This patch : 1) Replace the compatible string for the replicator : qcom,coresight-replicator1x => arm,coresight-dynamic-replicator 2) Changes the Kconfig symbol (since this is not part of any defconfigs) CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR 3) Improves the help message in the Kconfig. 4) Changes the name of the driver and the file : coresight-replicator-qcom => coresight-dynamic-replicator Cc: Pratik Patel <pratikp@codeaurora.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm4x: Adds trace return stack option programming for ETMv4.Mike Leach
Adds handling to program the return stack option into ETMv4 hardware if specified in the perf command line. If option is not supported by the hardware then it will be ignored. This allows capture to move between core/ETM combinations that have the hardware support to those that do not. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: ptm: Adds trace return stack option programming for PTM.Mike Leach
Adds handling to program the return stack option into PTM hardware if specified in the perf command line. If option is not supported by the hardware then it will be ignored. This allows capture to move between core/ETM combinations that have the hardware support to those that do not. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: pmu: Adds return stack option to perf coresight pmuMike Leach
Return stack is a programmable option on some ETM and PTM hardware. Adds the option flags to enable this from the perf event command line. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28hwtracing: coresight: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 2573 288 296 3157 c55 coresight-etm-perf.o File size After adding 'const': text data bss dec hex filename 2613 224 296 3133 c3d coresight-etm-perf.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm3x: Set synchronisation frequencty to TRM defaultMathieu Poirier
Register ETMSYNCFR holds the number of by that need to be generated before periodic synchronisation packets are inserted in the trace stream. By zeroing out the config structure, the current code effectively disable periodic synchronization. This patch simply initialise the recommended value for this register as specified in the technical reference manual. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etb10: Move etb_disable_hw() outside of lockMathieu Poirier
Function etb_disable_hw() is already taking care of unlocking and locking the coresight access register and as such doesn't need to be placed within the unlock/lock of function etb_update_buffer(). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add barrier packet for synchronisationMathieu Poirier
When a buffer overflow happens the synchronisation patckets usually present at the beginning of the buffer are lost, a situation that prevents the decoder from knowing the context of the traces being decoded. This patch adds a barrier packet to be used by sink IPs when a buffer overflow condition is detected. These barrier packets are then used by the decoding library as markers to force re-synchronisation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etb10: Remove useless conversion to LEMathieu Poirier
Internal CoreSight components are rendering trace data in little-endian format. As such there is no need to convert the data once more, hence removing the extra step. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Correct buffer lost incrementMathieu Poirier
Many conditions may cause synchronisation to be lost when updating the perf ring buffer but the end result is still the same: synchronisation is lost. As such there is no need to increment the lost count for each condition, just once will suffice. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-25intel_th: Perform time resync on capture startAlexander Shishkin
On some devices (TH 2.x devices at the moment), the internal time counter is initially not synchronized to the global crystal clock, so the time stamps it produces will not be useful. In this case, the driver needs to force the time counter resync. This applies the workaround to relevant devices. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-08-25intel_th: Add global activate/deactivate callbacks for the glue layersAlexander Shishkin
A glue layer may want to install its own hooks into trace capture start and stop paths to apply workarounds. This adds optional callbacks. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-08-25intel_th: pci: Use drvdata for quirksAlexander Shishkin
Allow attaching miscellaneous quirk information to devices as drvdata. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-08-25intel_th: pci: Add Cannon Lake PCH-LP supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-LP. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: <stable@vger.kernel.org>
2017-08-25intel_th: pci: Add Cannon Lake PCH-H supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-H. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: <stable@vger.kernel.org>
2017-08-25intel_th: pti: Support Low Power Path output port typeAlexander Shishkin
The Low Power Path (LPP) output port type, looks mostly like PTI to the software, with a few additional bits in the control register. This extends the PTI driver to support LPP ports as well. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>