summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-18Merge tag 'iio-for-5.18a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ...
2022-03-02iio: adc: xilinx-ams: Fix single channel switching sequenceRobert Hancock
Some of the AMS channels need to be read by switching into single-channel mode from the normal polling sequence. There was a logic issue in this switching code that could cause the first read of these channels to read back as zero. It appears that the sequencer should be set back to default mode before changing the channel selection, and the channel should be set before switching the sequencer back into single-channel mode. Also, write 1 to the EOC bit in the status register to clear it before waiting for it to become set, so that we actually wait for a new conversion to complete, and don't proceed based on a previous conversion completing. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20220127173450.3684318-5-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: adc: xilinx-ams: Fixed wrong sequencer register settingsRobert Hancock
Register settings used for the sequencer configuration register were incorrect, causing some inputs to not be read properly. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20220127173450.3684318-4-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: adc: xilinx-ams: Fixed missing PS channelsRobert Hancock
The code forgot to increment num_channels for the PS channel inputs, resulting in them not being enabled as they should. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20220127173450.3684318-3-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: accel: mma8452: use the correct logic to get mma8452_dataHaibo Chen
The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this struct mma8452_data *data = iio_priv(dev_get_drvdata(dev)); But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the upper logic also can't work. When try to show the avialable scale in userspace, will meet kernel dump, kernel handle NULL pointer dereference. So use dev_to_iio_dev() to correct the logic. Dual fixes tags as the second reflects when the bug was exposed, whilst the first reflects when the original bug was introduced. Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data") Fixes: 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/1645497741-5402-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.Billy Tsai
The formula for the ADC sampling period in ast2400/ast2500 is: ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0]) When ADC0C[9:0] is set to 0 the sampling voltage will be lower than expected, because the hardware may not have enough time to charge/discharge to a stable voltage. This patch use the flag CLK_DIVIDER_ONE_BASED which will use the raw value read from the register, with the value of zero considered invalid to conform to the corrected formula. Fixes: 573803234e72 ("iio: Aspeed ADC") Reported-by: Konstantin Klubnichkin <kitsok@yandex-team.ru> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220221012705.22008-1-billy_tsai@aspeedtech.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev structHaibo Chen
dev_get_drvdata() on iio_dev->dev no longer returns the iio_dev. Use dev_to_iio_dev() to get iio_dev struct. Fixes: 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1645702191-9400-1-git-send-email-haibo.chen@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-01iio: dac: add support for ltc2688Nuno Sá
The LTC2688 is a 16 channel, 16 bit, +-15V DAC with an integrated precision reference. It is guaranteed monotonic and has built in rail-to-rail output buffers that can source or sink up to 20 mA. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220225130129.69-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-28iio: afe: rescale: add temperature transducersLiam Beguin
A temperature transducer is a device that converts a thermal quantity into any other physical quantity. This patch adds support for temperature to voltage (like the LTC2997) and temperature to current (like the AD590) linear transducers. In both cases these are assumed to be connected to a voltage ADC. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-9-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-28iio: afe: rescale: add RTD temperature sensor supportLiam Beguin
An RTD (Resistance Temperature Detector) is a kind of temperature sensor used to get a linear voltage to temperature reading within a give range (usually 0 to 100 degrees Celsius). Common types of RTDs include PT100, PT500, and PT1000. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-8-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-28iio: test: add basic tests for the iio-rescale driverLiam Beguin
The iio-rescale driver supports various combinations of scale types and offsets. These can often result in large integer multiplications. Make sure these calculations are done right by adding a set of kunit test cases that build on top of iio-test-format. To run these tests, add the following to .kunitconfig $ cat .kunitconfig CONFIG_IIO=y CONFIG_IIO_RESCALE_KUNIT_TEST=y CONFIG_KUNIT=y Then run: $ ./tools/testing/kunit/kunit.py run --kunitconfig .kunitconfig Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-7-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: afe: rescale: reduce risk of integer overflowLiam Beguin
Reduce the risk of integer overflow by doing the scale calculation on a 64-bit integer. Since the rescaling is only performed on *val, reuse the IIO_VAL_FRACTIONAL_LOG2 case. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-6-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: afe: rescale: fix accuracy for small fractional scalesLiam Beguin
The approximation caused by integer divisions can be costly on smaller scale values since the decimal part is significant compared to the integer part. Switch to an IIO_VAL_INT_PLUS_NANO scale type in such cases to maintain accuracy. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-5-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: afe: rescale: add offset supportLiam Beguin
This is a preparatory change required for the addition of temperature sensing front ends. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-4-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: afe: rescale: add INT_PLUS_{MICRO,NANO} supportLiam Beguin
Some ADCs use IIO_VAL_INT_PLUS_{NANO,MICRO} scale types. Add support for these to allow using the iio-rescaler with them. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-3-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: afe: rescale: expose scale processing functionLiam Beguin
In preparation for the addition of kunit tests, expose the logic responsible for combining channel scales. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220213025739.2561834-2-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: frequency: admv4420.c: Add support for ADMV4420Cristian Pop
Add support for K Band Downconverter with Integrated Fractional-N PLL and VCO. More info: https://www.analog.com/en/products/admv4420.html Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20220223130808.13352-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-27iio: amplifiers: ada4250: add support for ADA4250Antoniu Miclaus
The ADA4250 is an instrumentation amplifier with SPI/pin-strap progammable gains that is optimized for ultra-low power systems. With a minimum supply voltage of 1.7V, 26uA of quiescent current, a shutdown mode, a sleep mode, and a fast wake up settling time, ADA4250 can be power cycled on a battery powered system for even futher savings. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220223120112.8067-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Remove unneeded blank linesAndy Shevchenko
Remove unneeded blank lines where they separate the data type definitions and the macros which are using them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-8-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Drop comma in terminator entriesAndy Shevchenko
Terminator entries are by definition should terminate the array. Dropping comma make this enforced at compile time. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-7-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Extract adxl345_powerup() helperAndy Shevchenko
For the sake of symmetry and possible reuse in the future extract adxl435_powerup() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Add ACPI HID tableKai-Heng Feng
x86 boards may use ACPI HID "ADS0345" for adxl345 device. Analog replied: "ADS034X is not a valid PNP ID. ADS0345 would be. I'm not aware that this ID is already taken. Feel free to submit a mainline Linux input mailing list patch." So add an ACPI match table for that accordingly. Since ACPI device may not match to any I2C ID, use the name and type directly from ACPI ID table in absence of I2C ID. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220222090009.2060-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Get rid of name parameter in adxl345_core_probe()Andy Shevchenko
As a preparation to switch to use device properties, get rid of name parameter in adxl345_core_probe(). Instead, choose it based on the type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Set driver_data for OF enumerationAndy Shevchenko
In order to enable this driver on mode platforms, assign driver_data field in the OF device ID table. While at it, make sure that device type is not 0 which may be wrongly interpreted by device property APIs in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl345: Convert to use dev_err_probe()Andy Shevchenko
It's fine to call dev_err_probe() in ->probe() when error code is known. Convert the driver to use dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220222090009.2060-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: adc: Add check for devm_request_threaded_irqJiasheng Jiang
As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value and return error if fails. Fixes: fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220224062849.3280966-1-jiasheng@iscas.ac.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Add support for Maxim DS3502Jagath Jog J
The DS3502 is a 7-bit, nonvolatile digital potentiometer featuring an output voltage range of up to 15.5V. DS3502 support is added into existing DS1803 driver. Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3502.pdf Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-7-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Add device specific read_raw functionJagath Jog J
Added function pointer in the device specific structure to call the appropriate device read_raw function, so that the other type of devices with different read method can be handled. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-6-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Change to firmware provided dataJagath Jog J
Using firmware provided data to get the device specific structure if not available fall back to id->driver_data. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-5-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Add channel information in device dataJagath Jog J
Adding each device wiper count and channel information into device private data. Utilizing addr member of struct iio_chan_spec to get the wiper register address so that the value can be read or write to the same address. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-4-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Add available functionalityJagath Jog J
Adding available functionality for DS1803 driver which will show the minimum, step and maximum values that the driver can accepts through sysfs entry. Now using the max value present in avail array instead of chip type specific macro to make the driver flexible to add other type of potentiometer with different max position value. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-3-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: potentiometer: ds1803: Alignment to match the open parenthesisJagath Jog J
Fix following checkpatch.pl check by removing blank space. CHECK: Alignment should match open parenthesis. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220223163525.13399-2-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl367: Fix handled initialization in adxl367_irq_handler()Nathan Chancellor
Clang warns: drivers/iio/accel/adxl367.c:887:2: error: variable 'handled' is uninitialized when used here [-Werror,-Wuninitialized] handled |= adxl367_push_event(indio_dev, status); ^~~~~~~ drivers/iio/accel/adxl367.c:879:14: note: initialize the variable 'handled' to silence this warning bool handled; ^ = 0 1 error generated. This should have used '=' instead of '|='; make that change to resolve the warning. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1605 Reported-by: kernel test robot <lkp@intel.com> Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220224211034.625130-1-nathan@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: accel: adxl367: unlock on error in adxl367_buffer_predisable()Dan Carpenter
This error path needs to call the mutex_unlock(&st->lock) before returning. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220224150228.GB6856@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-26iio: adc: xilinx-ams: Use devm_delayed_work_autocancel() to simplify codeChristophe JAILLET
Use devm_delayed_work_autocancel() instead of hand writing it. This is less verbose and saves a few lines of code. devm_delayed_work_autocancel() uses devm_add_action() instead of devm_add_action_or_reset(). This is fine, because if the underlying memory allocation fails, no work has been scheduled yet. So there is nothing to undo. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2626e6a057e40cd2271ef0e5f81d12e607bad5b4.1644776929.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21iio: frequency: admv1014: add support for ADMV1014Antoniu Miclaus
The ADMV1014 is a silicon germanium (SiGe), wideband, microwave downconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1014.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220215081216.67706-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21iio: accel: add ADXL367 driverCosmin Tanislav
The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. The ADXL367 does not alias input signals to achieve ultralow power consumption, it samples the full bandwidth of the sensor at all data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, with a resolution of 0.25mg/LSB on the +-2 g range. In addition to its ultralow power consumption, the ADXL367 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and an internal ADC for synchronous conversion of an additional analog input. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220214073810.781016-6-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21iio: introduce mag_referencedCosmin Tanislav
Some accelerometers that support activity and inactivity events also support a referenced mode, in which the gravitational acceleration is taken as a point of reference before comparing the acceleration to the specified activity and inactivity magnitude. For example, in the case of the ADXL367, for activity detection, the formula is: abs(acceleration - reference) > magnitude Add a new event type that makes this behavior clear. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220214073810.781016-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21iio:adc:ad7280a: Move out of stagingJonathan Cameron
This is a rather unusual device (in IIO anyway). However, it has a near to standard userspace ABI. Note the work to move this out of staging was done against a minimal QEMU model, which doesn't model all the features of the device. I have no intention to upstream the QEMU model as it was developed just to enable this driver cleanup. https://github.com/jic23/qemu/tree/ad7280a-hacks Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-21-jic23@kernel.org
2022-02-21iio:adc:stm32*: Use pm[_sleep]_ptr() etc to avoid need to make pm __maybe_unusedJonathan Cameron
The combinations of either * pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() * pm_ptr() and RUNTIME_PM_OPS()/SYSTEM_SLEEP_PM_OPS Make sure the functions are always visible to the compiler and removed by it rather than requring #ifdef magic. This removes the need to mark the functions as __maybe_unused and saves additional space with some build options as the dev_pm_ops structure itself can be dropped automatically if CONFIG_PM is not enabled. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Olivier Moysan <olivier.moysan@st.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-51-jic23@kernel.org
2022-02-21iio:light:rpr0521: Switch from CONFIG_PM guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-50-jic23@kernel.org
2022-02-21iio:chemical:atlas: Switch from CONFIG_PM guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-49-jic23@kernel.org
2022-02-21iio:proximity:pulsedlight: Switch from CONFIG_PM guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-48-jic23@kernel.org
2022-02-21iio:light:bh1780: Switch from CONFIG_PM guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Use the new DEFINE_RUNTIME_DEV_PM_OPS to reduce boilerplate. Removing instances of this approach from IIO also stops them being copied into new drivers. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-47-jic23@kernel.org
2022-02-21iio:adc:rcar: Switch from CONFIG_PM guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-46-jic23@kernel.org
2022-02-21iio:adc:stm32:Switch from CONFIG_PM guards to pm_ptr()Jonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. The new DEFINE_RUNTIME_DEV_PM_OPS() macro reduces boilerplate. Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-45-jic23@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 07:10:36 +0000