summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2023-12-19Revert "iio: hid-sensor-als: Add light color temperature support"Srinivas Pandruvada
This reverts commit 5f05285df691b1e82108eead7165feae238c95ef. This commit assumes that every HID descriptor for ALS sensor has presence of usage id ID HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE. When the above usage id is absent, driver probe fails. This breaks ALS sensor functionality on many platforms. Till we have a good solution, revert this commit. Reported-by: Thomas Weißschuh <thomas@t-8ch.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231217200703.719876-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-19Revert "iio: hid-sensor-als: Add light chromaticity support"Srinivas Pandruvada
This reverts commit ee3710f39f9d0ae5137a866138d005fe1ad18132. This commit assumes that every HID descriptor for ALS sensor has presence of usage id ID HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X and HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y. When the above usage ids are absent, driver probe fails. This breaks ALS sensor functionality on many platforms. Till we have a good solution, revert this commit. Reported-by: Thomas Weißschuh <thomas@t-8ch.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231217200703.719876-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04iio: adc: MCP3564: fix hardware identification logicMarius Cristea
In mcp3564_config() fix the hardware identification logic based on the hardware ID registers. Second part of the code was disabled by an logic error. Fix a typo related to the "MODULE_DESCRIPTION". Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC) Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: MCP3564: fix calib_bias and calib_scale range checksJavier Carrasco
The current implementation uses the AND (&&) operator to check if the value to write for IIO_CHAN_INFO_CALIBBIAS and IIO_CHAN_INFO_CALIBSCALE is within the valid ranges. The evaluated values are the lower and upper limits of the ranges, so this operation always evaluates to false. The OR (||) operator must be used instead. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20231201-mcp3564_range_checks-v1-1-68f4436e22b0@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: meson: add separate config for axg SoC familyGeorge Stark
According to Amlogic custom kernels ADC of axg SoC family has vref_select and requires this setting to work nominally and thus needs a separate config. Fixes: 90c6241860bf ("iio: adc: meson: init voltage control bits") Signed-off-by: George Stark <gnstark@salutedevices.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: imx93: add four channels for imx93 adcHaibo Chen
According to the spec, this ADC totally support 8 channels. i.MX93 contain this ADC with 4 channels connected to pins in the package. i.MX95 contain this ADC with 8 channels connected to pins in the package. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support") Link: https://lore.kernel.org/r/20231116071026.611269-1-haibo.chen@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()Wadim Egorov
Fix wrong handling of a DMA request where the probing only failed if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV value is returned. This makes DMAs explicitly optional. Even if the DMA request is unsuccessfully, the ADC can still work properly. We do also handle the defer probe case by making use of dev_err_probe(). Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support") Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com> Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: triggered-buffer: prevent possible freeing of wrong bufferDavid Lechner
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") introduced support for multiple buffers per indio_dev but left indio_dev->buffer for a few legacy use cases. In the case of the triggered buffer, iio_triggered_buffer_cleanup() still assumes that indio_dev->buffer points to the buffer allocated by iio_triggered_buffer_setup_ext(). However, since iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer() to attach the buffer, indio_dev->buffer will only point to the buffer allocated by iio_device_attach_buffer() if it the first buffer attached. This adds a check to make sure that no other buffer has been attached yet to ensure that indio_dev->buffer will be assigned when iio_device_attach_buffer() is called. As per discussion in the review thread, we may want to deal with multiple triggers per device, but this is a fix for the issue in the meantime and any such support would be unlikely to be suitable for a backport. Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_rawSu Hui
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the true value rather than only return IIO_VAL_INT. Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: adis16475: use bit numbers in assign_bit()Nuno Sa
assign_bit() expects a bit number and not a mask like BIT(x). Hence, just remove the BIT() macro from the #defines. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/ Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: adis16475: add spi_device_id tableNuno Sa
This prevents the warning message "SPI driver has no spi_device_id for..." when registering the driver. More importantly, it makes sure that module autoloading works as spi relies on spi: modaliases and not of. While at it, move the of_device_id table to it's natural place. Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-25iio: tmag5273: fix temperature offsetJavier Carrasco
The current offset has the scale already applied to it. The ABI documentation defines the offset parameter as "offset to be added to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to obtain value in the <type> units as specified in <type>[Y]_raw documentation" The right value is obtained at 0 degrees Celsius by the formula provided in the datasheet: T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res where: T = 0 degrees Celsius Tsens_t0 (reference temperature) = 25 degrees Celsius Tadc_t0 (16-bit format for Tsens_t0) = 17508 Tadc_res = 60.1 LSB/degree Celsius The resulting offset is 16005.5, which has been truncated to 16005 to provide an integer value with a precision loss smaller than the 1-LSB measurement precision. Fix the offset to apply its value prior to scaling. Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time tableJavier Carrasco
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are associated to an index that is used to select the right measurement resolution and its corresponding measurement time. The current implementation selects the measurement resolution and the temperature measurement time properly, but it does not select the right humidity measurement time in all cases. In summary, the 40 and 70 humidity measurement times are swapped. The reason for that is probably the unusual coding for the measurement resolution. According to the datasheet, the bits [7,0] of the "user register" are used as follows to select the bit resolution: -------------------------------------------------- | Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) | -------------------------------------------------- | 0 | 0 | 12 | 14 | 16000 | 50000 | -------------------------------------------------- | 0 | 1 | 8 | 12 | 3000 | 13000 | -------------------------------------------------- | 1 | 0 | 10 | 13 | 5000 | 25000 | -------------------------------------------------- | 1 | 1 | 11 | 11 | 8000 | 7000 | -------------------------------------------------- *This table is available in the official datasheet, page 13/21. I have just appended the times provided in the humidity/temperature tables, pages 3/21, 5/21. Note that always a pair of resolutions is selected. The sampling frequencies [20, 40, 70, 120] are assigned to a linear index [0..3] which is then coded as follows [1]: Index [7,0] -------------- idx 0 0,0 idx 1 1,0 idx 2 0,1 idx 3 1,1 That is done that way because the temperature measurements are being used as the reference for the sampling frequency (the frequencies and the temperature measurement times are correlated), so increasing the index always reduces the temperature measurement time and its resolution. Therefore, the temperature measurement time array is as simple as [50000, 25000, 13000, 7000] On the other hand, the humidity resolution cannot follow the same pattern because of the way it is coded in the "user register", where both resolutions are selected at the same time. The humidity measurement time array is the following: [16000, 3000, 5000, 8000], which defines the following assignments: Index [7,0] Trh ----------------------- idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000) idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000) idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000) idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000) The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0], which is not the case for the reason explained above. So a simple modification is required to obtain the right humidity measurement time array, swapping the values in the positions 1 and 2. The right table should be the following: [16000, 5000, 3000, 8000] Fix the humidity measurement time array with the right idex/value coding. [1] The actual code that makes this coding and assigns it to the current value of the "user register" is the following: config_reg &= 0x7E; config_reg |= ((i & 1) << 7) + ((i & 2) >> 1); Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: kx022a: Fix acceleration value scalingMatti Vaittinen
The IIO ABI mandates acceleration values from accelerometer to be emitted in m/s^2. The KX022A was emitting values in micro m/s^2. Fix driver to report the correct scale values. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reported-by: Jagath Jog J <jagathjog1996@gmail.com> Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer") Tested-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/ZTEt7NqfDHPOkm8j@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-03Merge tag 'char-misc-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ...
2023-10-20Merge tag 'iio-for-6.7a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.7 Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. * tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits) iio: Use device_get_match_data() iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero. dt-bindings: trivial-devices: add silabs,si7005 iio: si7005: Add device tree support drivers: imu: adis16475.c: Remove scan index from delta channels dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property iio: resolver: ad2s1210: remove of_match_ptr() iio: resolver: ad2s1210: remove DRV_NAME macro iio: resolver: ad2s1210: move out of staging staging: iio: resolver: ad2s1210: simplify code with guard(mutex) staging: iio: resolver: ad2s1210: clear faults after soft reset staging: iio: resolver: ad2s1210: refactor sample toggle staging: iio: resolver: ad2s1210: remove fault attribute staging: iio: resolver: ad2s1210: add label attribute support staging: iio: resolver: ad2s1210: add register/fault support summary staging: iio: resolver: ad2s1210: implement fault events iio: event: add optional event label support staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr ...
2023-10-17iio: afe: rescale: Accept only offset channelsLinus Walleij
As noted by Jonathan Cameron: it is perfectly legal for a channel to have an offset but no scale in addition to the raw interface. The conversion will imply that scale is 1:1. Make rescale_configure_channel() accept just scale, or just offset to process a channel. When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw() we now have to deal with the fact that OFFSET could be present but SCALE missing. Add code to simply scale 1:1 in this case. Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/ Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels") Fixes: 9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug") Reported-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: exynos-adc: request second interupt only when touchscreen mode is usedMarek Szyprowski
Second interrupt is needed only when touchscreen mode is used, so don't request it unconditionally. This removes the following annoying warning during boot: exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231006224440.442864-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.Marius Cristea
The patch 33ec3e5fc1ea: "iio: adc: adding support for MCP3564 ADC" leads to the following Smatch static checker warning: smatch warnings: drivers/iio/adc/mcp3564.c:1105 mcp3564_fill_scale_tbls() warn: unsigned '__x' is never less than zero. vim +/__x +1105 drivers/iio/adc/mcp3564.c 1094 1095 static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc) 1096 { ..... 1103 for (i = 0; i < MCP3564_MAX_PGA; i++) { 1104 ref = adc->vref_mv; > 1105 tmp1 = shift_right((u64)ref * NANO, pow); 1106 div_u64_rem(tmp1, NANO, &tmp0); 1107 ..... 1113 } Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309280738.NWjVfVt4-lkp@intel.com/ Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC) Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20231013132333.10582-1-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: si7005: Add device tree supportJavier Carrasco
This device supports ACPI detection but lacks of the device tree counterpart. Add device tree support. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231012-topic-si7005_devicetree-v1-1-6c8a6fa7b3ec@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14drivers: imu: adis16475.c: Remove scan index from delta channelsRamona Gradinariu
Some devices do not support delta angle and delta velocity burst readings, which means there should be no buffer support for these types of channels. A new list of channels is created which contains the delta channels structures with the scan index equal to -1 to allow for raw register readings, without buffer support. This list of channels is assigned to the devices which do not support delta angle and delta velocity burst readings. Fixes: 8f6bc87d67c0 ("iio: imu: adis16475.c: Add delta angle and delta velocity channels") Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231012122456.765709-2-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: resolver: ad2s1210: remove of_match_ptr()David Lechner
To be consistent with the rest of iio, remove of_match_ptr(). It does not do anything useful here. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-2-b2ee31c0e9dd@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-14iio: resolver: ad2s1210: remove DRV_NAME macroDavid Lechner
The DRV_NAME macro is only used in one place in the ad2s1210 driver and is not really needed so let's remove it. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-1-b2ee31c0e9dd@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-13iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScaleRobert Hancock
The driver was previously using offset and scale values for the temperature sensor readings which were only valid for 7-series devices. Add per-device-type values for offset and scale and set them appropriately for each device type. Note that the values used for the UltraScale family are for UltraScale+ (i.e. the SYSMONE4 primitive) using the internal reference, as that seems to be the most common configuration and the device tree values Xilinx's device tree generator produces don't seem to give us anything to tell us which configuration is used. However, the differences within the UltraScale family seem fairly minor and it's closer than using the 7-series values instead in any case. Fixes: c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-13iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholdsRobert Hancock
In the probe function, the driver was reading out the thresholds already set in the core, which can be configured by the user in the Vivado tools when the FPGA image is built. However, it later clobbered those values with zero or maximum values. In particular, the overtemperature shutdown threshold register was overwritten with the max value, which effectively prevents the FPGA from shutting down when the desired threshold was eached, potentially risking hardware damage in that case. Remove this code to leave the preconfigured default threshold values intact. The code was also disabling all alarms regardless of what enable state they were left in by the FPGA image, including the overtemperature shutdown feature. Leave these bits in their original state so they are not unconditionally disabled. Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-12iio: resolver: ad2s1210: move out of stagingDavid Lechner
This moves the ad2s1210 resolver driver out of staging. The driver has been fixed up and is ready to graduate. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231010-ad2s1210-mainline-v5-4-35a0f6ffa04a@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: event: add optional event label supportDavid Lechner
This adds a new optional field to struct iio_info to allow drivers to specify a label for the event. This is useful for cases where there are many events or the event attribute name is not descriptive enough or where an event doesn't have any other attributes. The implementation is based on the existing label support for channels. So either all events of a device have a label attribute or none do. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-12-ec00746840fc@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: adc: mt6577_auxadc: Fix kernel panic on suspendAngeloGioacchino Del Regno
Commit a2d518fbe376 ("iio: adc: mt6577_auxadc: Simplify with device managed function") simplified the driver with devm hooks, but wrongly states that the platform_set_drvdata(), platform_get_drvdata() are unused after the simplification: the driver data is infact used in .suspend() and .resume() PM callbacks, currently producing a kernel panic. Reintroduce the call to platform_set_drvdata() in the probe function Fixes: a2d518fbe376 ("iio: adc: mt6577_auxadc: Simplify with device managed function") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20231010121940.159696-1-angelogioacchino.delregno@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: adc: ad7192: Add fast settling supportAlisa-Dariana Roman
Add fast settling mode support for AD7193. Add two new device specific attributes: oversampling_ratio and oversampling_ratio_available. For AD7193 the user can set the average factor by writing to oversampling_ratio. The possible values are exposed when reading oversampling_ratio_available. Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://lore.kernel.org/r/20231010124927.143343-4-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: adc: ad7192: Remove unused memberAlisa-Dariana Roman
Remove extend_name from channel macro since it is not used anywhere. Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://lore.kernel.org/r/20231010124927.143343-3-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: adc: ad7192: Organize chip infoAlisa-Dariana Roman
Move all chip specific data into chip_info structure. Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://lore.kernel.org/r/20231010124927.143343-2-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-11iio: accel: mxc4005: allow module autoloading via OF compatibleLuca Ceresoli
Add OF device table with compatible strings to allow automatic module loading. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-2-e7c0faea72e4@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: pressure: ms5611: ms5611_prom_is_valid false negative bugAlexander Zangerl
The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips with "PROM integrity check failed" because it doesn't accept a prom crc value of zero as legitimate. According to the datasheet for this chip (and the manufacturer's application note about the PROM CRC), none of the possible values for the CRC are excluded - but the current code in ms5611_prom_is_valid() ends with return crc_orig != 0x0000 && crc == crc_orig Discussed with the driver author (Tomasz Duszynski) and he indicated that at that time (2015) he was dealing with some faulty chip samples which returned blank data under some circumstances and/or followed example code which indicated CRC zero being bad. As far as I can tell this exception should not be applied anymore; We've got a few hundred custom boards here with this chip where large numbers of the prom have a legitimate CRC value 0, and do work fine, but which the current driver code wrongly rejects. Signed-off-by: Alexander Zangerl <az@breathe-safe.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: ad7192: Correct reference voltageAlisa-Dariana Roman
The avdd and the reference voltage are two different sources but the reference voltage was assigned according to the avdd supply. Add vref regulator structure and set the reference voltage according to the vref supply from the devicetree. In case vref supply is missing, reference voltage is set according to the avdd supply for compatibility with old devicetrees. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: light: vcnl4000: Don't power on/off chip in configMårten Lindahl
After enabling/disabling interrupts on the vcnl4040 chip the als and/or ps sensor is powered on or off depending on the interrupt enable bits. This is made as a last step in write_event_config. But there is no reason to do this as the runtime PM handles the power state of the sensors. Interfering with this may impact sensor readings. Consider the following: 1. Userspace makes sensor data reading which triggers RPM resume (sensor powered on) and a RPM suspend timeout. The timeout is 2000ms before RPM suspend powers the sensor off if no new reading is made within the timeout period. 2. Userspace disables interrupts => powers sensor off 3. Userspace reads sensor data = 0 because sensor is off and the suspend timeout has not passed. For each new reading made within the timeout period the timeout is renewed with 2000ms and RPM will not make a new resume (device was not suspended). So the sensor will not be powered on. 4. No further userspace reading for 2000ms ends RPM suspend timeout and triggers suspend (powers off already powered off sensor). Powering sensor off in (2) makes all consecutive readings made within 2000ms to the previous reading (3) return invalid data. Skip setting power state when writing new event config. Fixes: 546676121cb9 ("iio: light: vcnl4000: Add interrupt support for vcnl4040") Fixes: bc292aaf9cb4 ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200") Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: addac: Kconfig: update ad74413r selectionsAntoniu Miclaus
Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: pressure: dps310: Adjust Timeout SettingsLakshmi Yadlapati
The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4abcea4 ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: imu: bno055: Fix missing Kconfig dependenciesJonathan Cameron
This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak
The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()Tzung-Bi Shih
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handlerGONG, Ruiqi
When compiling with gcc 13 with -Warray-bounds enabled: In file included from drivers/iio/proximity/irsd200.c:15: In function ‘iio_push_to_buffers_with_timestamp’, inlined from ‘irsd200_trigger_handler’ at drivers/iio/proximity/irsd200.c:770:2: ./include/linux/iio/buffer.h:42:46: error: array subscript ‘int64_t {aka long long int}[0]’ is partly outside array bounds of ‘s16[1]’ {aka ‘short int[1]’} [-Werror=array-bounds=] 42 | ((int64_t *)data)[ts_offset] = timestamp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ drivers/iio/proximity/irsd200.c: In function ‘irsd200_trigger_handler’: drivers/iio/proximity/irsd200.c:763:13: note: object ‘buf’ of size 2 763 | s16 buf = 0; | ^~~ The problem seems to be that irsd200_trigger_handler() is taking a s16 variable as an int64_t buffer. As Jonathan suggested [1], fix it by extending the buffer to a two-element array of s64. Link: https://github.com/KSPP/linux/issues/331 Link: https://lore.kernel.org/lkml/20230809181329.46c00a5d@jic23-huawei/ [1] Fixes: 3db3562bc66e ("iio: Add driver for Murata IRS-D200") Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Tested-by: Waqar Hameed <waqar.hameed@axis.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230810035910.1334706-1-gongruiqi@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: magnetometer: ak8975: Fix 'Unexpected device' errorAndré Apitzsch
Explicity specify array indices to fix mapping between asahi_compass_chipset and ak_def_array. While at it, remove unneeded AKXXXX. Fixes: 4f9ea93afde1 ("iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables") Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231001-ak_magnetometer-v1-1-09bf3b8798a3@apitzsch.eu Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: stm32-adc: Replace deprecated strncpy() with strscpy()Justin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1]. We should prefer more robust and less ambiguous string interfaces. We expect adc->chan_name[val] to be NUL-terminated based on ch_name's use within functions that expect NUL-terminated strings like strncmp and printf-likes: | if (!strncmp(stm32_adc_ic[i].name, ch_name, STM32_ADC_CH_SZ)) { | /* Check internal channel availability */ | switch (i) { | case STM32_ADC_INT_CH_VDDCORE: | if (!adc->cfg->regs->or_vddcore.reg) | dev_warn(&indio_dev->dev, | "%s channel not available\n", ch_name); ... There is no evidence that NUL-padding is needed either. Considering the above, a suitable replacement is strscpy() [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. If, for any reason, NUL-padding _is_ required we should go for `strscpy_pad`. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230921-strncpy-drivers-iio-adc-stm32-adc-c-v1-1-c50eca098597@google.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: meson: improve error logging at probe stageGeorge Stark
Add log messages for errors that may occur at the probe stage Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230721102413.255726-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: kx022a: Support ROHM KX132ACR-LBZMatti Vaittinen
dt-bindings: iio: Add KX132ACR-LBZ accelerometer ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It has a subset of KX022A functionalities, dropping support for tap, free fall and tilt detection engines. Also, the register interface is an exact subset of what is found on KX022A (except the WHO_AM_I register value). Add support for KX132ACR-LBZ. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/272065b9f35b817aff86b7760ff1aaaaaaa969f5.1695879676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: ad7192: Improve f_order computationAlisa-Dariana Roman
Instead of using the f_order member of ad7192_state, a function that computes the f_order coefficient makes more sense. This coefficient is a function of the sinc filter and chop filter states. Remove f_order member of ad7192_state structure. Instead use ad7192_compute_f_order function to compute the f_order coefficient according to the sinc filter and chop filter states passed as parameters. Add ad7192_get_f_order function that returns the current f_order coefficient of the device. Add ad7192_compute_f_adc function that computes the f_adc value according to the sinc filter and chop filter states passed as parameters. Add ad7192_get_f_adc function that returns the current f_adc value of the device. Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://lore.kernel.org/r/20230924215148.102491-3-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: ad7192: Use bitfield access macrosAlisa-Dariana Roman
Include bitfield.h and update driver to use bitfield access macros GENMASK, FIELD_PREP and FIELD_GET. Remove old macros in favor of using FIELD_PREP and masks. Change %d to %ld to match the type of FIELD_GET(). Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://lore.kernel.org/r/20230924215148.102491-2-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: pressure: Support ROHM BU1390Matti Vaittinen
Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z can measure pressures ranging from 300 hPa to 1300 hPa with configurable measurement averaging and internal FIFO. The sensor does also provide temperature measurements. Sensor does also contain IIR filter implemented in HW. The data-sheet says the IIR filter can be configured to be "weak", "middle" or "strong". Some RMS noise figures are provided in data sheet but no accurate maths for the filter configurations is provided. Hence, the IIR filter configuration is not supported by this driver and the filter is configured to the "middle" setting (at least not for now). The FIFO measurement mode is only measuring the pressure and not the temperature. The driver measures temperature when FIFO is flushed and simply uses the same measured temperature value to all reported temperatures. This should not be a problem when temperature is not changing very rapidly (several degrees C / second) but allows users to get the temperature measurements from sensor without any additional logic. This driver allows the sensor to be used in two muitually exclusive ways, 1. With trigger (data-ready IRQ). In this case the FIFO is not used as we get data ready for each collected sample. Instead, for each data-ready IRQ we read the sample from sensor and push it to the IIO buffer. 2. With hardware FIFO and watermark IRQ. In this case the data-ready is not used but we enable watermark IRQ. At each watermark IRQ we go and read all samples in FIFO and push them to the IIO buffer. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/4f23211e3cf248f9f48ddb2a752387bb00e9c2c4.1695727471.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: imu: mpu6050: add level shifter flagAndreas Kemnade
Some boards fail in magnetometer probe if level shifter flag is not set, definition was found in the vendor Linux kernel v3.0. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20230927173245.2151083-3-andreas@kemnade.info Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 00:44:19 +0000