summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)Author
2021-06-23irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entryMarc Zyngier
[ Upstream commit 382e6e177bc1c02473e56591fe5083ae1e4904f6 ] The arm64 entry code suffers from an annoying issue on taking a NMI, as it sets PMR to a value that actually allows IRQs to be acknowledged. This is done for consistency with other parts of the code, and is in the process of being fixed. This shouldn't be a problem, as we are not enabling interrupts whilst in NMI context. However, in the infortunate scenario that we took a spurious NMI (retired before the read of IAR) *and* that there is an IRQ pending at the same time, we'll ack the IRQ in NMI context. Too bad. In order to avoid deadlocks while running something like perf, teach the GICv3 driver about this situation: if we were in a context where no interrupt should have fired, transiently set PMR to a value that only allows NMIs before acking the pending interrupt, and restore the original value after that. This papers over the core issue for the time being, and makes NMIs great again. Sort of. Fixes: 4d6a38da8e79e94c ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry") Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14irqchip/gic-v3: Fix OF_BAD_ADDR error handlingArnd Bergmann
[ Upstream commit 8e13d96670a4c050d4883e6743a9e9858e5cfe10 ] When building with extra warnings enabled, clang points out a mistake in the error handling: drivers/irqchip/irq-gic-v3-mbi.c:306:21: error: result of comparison of constant 18446744073709551615 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (mbi_phys_base == OF_BAD_ADDR) { Truncate the constant to the same type as the variable it gets compared to, to shut make the check work and void the warning. Fixes: 505287525c24 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210323131842.2773094-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11irqchip/gic-v3: Do not enable irqs when handling spurious interrupsHe Ying
commit a97709f563a078e259bf0861cd259aa60332890a upstream. We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f3234bc2d ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30irqchip/ingenic: Add support for the JZ4760Paul Cercueil
[ Upstream commit 5fbecd2389f48e1415799c63130d0cdce1cf3f60 ] Add support for the interrupt controller found in the JZ4760 SoC, which works exactly like the one in the JZ4770. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmapHuacai Chen
commit c1f664d2400e73d5ca0fcd067fa5847d2c789c11 upstream. Currently we use bitmap_alloc() to allocate msi bitmap which should be initialized with zero. This is obviously wrong but it works because msi can fallback to legacy interrupt mode. So use bitmap_zalloc() instead. Fixes: 632dcc2c75ef6de3272aa ("irqchip: Add Loongson PCH MSI controller") Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210209071051.2078435-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04irqchip/imx: IMX_INTMUX should not default to y, unconditionallyGeert Uytterhoeven
[ Upstream commit a890caeb2ba40ca183969230e204ab144f258357 ] Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC, and ask the user in case of compile-testing. Fixes: 66968d7dfc3f5451 ("irqchip: Add COMPILE_TEST support for IMX_INTMUX") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27irqchip/mips-cpu: Set IPI domain parent chipMathias Kresin
commit 599b3063adf4bf041a87a69244ee36aded0d878f upstream. Since commit 55567976629e ("genirq/irqdomain: Allow partial trimming of irq_data hierarchy") the irq_data chain is valided. The irq_domain_trim_hierarchy() function doesn't consider the irq + ipi domain hierarchy as valid, since the ipi domain has the irq domain set as parent, but the parent domain has no chip set. Hence the boot ends in a kernel panic. Set the chip for the parent domain as it is done in the mips gic irq driver, to have a valid irq_data chain. Fixes: 3838a547fda2 ("irqchip: mips-cpu: Introduce IPI IRQ domain support") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210107213603.1637781-1-dev@kresin.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30irqchip/qcom-pdc: Fix phantom irq when changing between rising/fallingDouglas Anderson
[ Upstream commit 2f5fbc4305d07725bfebaedb09e57271315691ef ] We have a problem if we use gpio-keys and configure wakeups such that we only want one edge to wake us up. AKA: wakeup-event-action = <EV_ACT_DEASSERTED>; wakeup-source; Specifically we end up with a phantom interrupt that blocks suspend if the line was already high and we want wakeups on rising edges (AKA we want the GPIO to go low and then high again before we wake up). The opposite is also problematic. Specifically, here's what's happening today: 1. Normally, gpio-keys configures to look for both edges. Due to the current workaround introduced in commit c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the line was high we'd configure for falling edges. 2. At suspend time, we change to look for rising edges. 3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt. We can solve this by just clearing the phantom interrupt. NOTE: it is possible that this could cause problems for a client with very specific needs, but there's not much we can do with this hardware. As an example, let's say the interrupt signal is currently high and the client is looking for falling edges. The client now changes to look for rising edges. The client could possibly expect that if the line has a short pulse low (and back high) that it would always be detected. Specifically no matter when the pulse happened, it should either have tripped the (old) falling edge trigger or the (new) rising edge trigger. We will simply not trip it. We could narrow down the race a bit by polling our parent before changing types, but no matter what we do there will still be a period of time where we can't tell the difference between a real transition (or more than one transition) and the phantom. Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30irqchip/ti-sci-intr: Fix freeing of irqsLokesh Vutla
[ Upstream commit fc6c7cd3878641fd43189f15697e7ad0871f5c1a ] ti_sci_intr_irq_domain_free() assumes that out_irq of intr is stored in data->chip_data and uses it for calling ti_sci irq_free() and then mark the out_irq as available resource. But ti_sci_intr_irq_domain_alloc() is storing p_hwirq(parent's hardware irq) which is translated from out_irq. This is causing resource leakage and eventually out_irq resources might be exhausted. Fix ti_sci_intr_irq_domain_alloc() by storing the out_irq in data->chip_data. Fixes: a5b659bd4bc7 ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201102120631.11165-1-lokeshvutla@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30irqchip/ti-sci-inta: Fix printing of inta id on probe successLokesh Vutla
[ Upstream commit b10d5fd489b0c67f59cbdd28d95f4bd9f76a62f2 ] On a successful probe, the driver tries to print a success message with INTA device id. It uses pdev->id for printing the id but id is stored in inta->ti_sci_id. Fix it by correcting the dev_info parameter. Fixes: 5c4b585d2910 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201102120614.11109-1-lokeshvutla@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30irqchip/alpine-msi: Fix freeing of interrupts on allocation error pathMarc Zyngier
[ Upstream commit 3841245e8498a789c65dedd7ffa8fb2fee2c0684 ] The alpine-msi driver has an interesting allocation error handling, where it frees the same interrupts repeatedly. Hilarity follows. This code is probably never executed, but let's fix it nonetheless. Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller") Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com> Cc: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-25Merge tag 'irqchip-fixes-5.10-2' of ↵irq-urgent-2020-11-29Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix Exiu driver trigger type when using ACPI - Fix GICv3 ITS suspend/resume to use the in-kernel path at all times, sidestepping braindead firmware support Link: https://lore.kernel.org/r/20201122184752.553990-1-maz@kernel.org
2020-11-22irqchip/gic-v3-its: Unconditionally save/restore the ITS state on suspendXu Qiang
On systems without HW-based collections (i.e. anything except GIC-500), we rely on firmware to perform the ITS save/restore. This doesn't really work, as although FW can properly save everything, it cannot fully restore the state of the command queue (the read-side is reset to the head of the queue). This results in the ITS consuming previously processed commands, potentially corrupting the state. Instead, let's always save the ITS state on suspend, disabling it in the process, and restore the full state on resume. This saves us from broken FW as long as it doesn't enable the ITS by itself (for which we can't do anything). This amounts to simply dropping the ITS_FLAGS_SAVE_SUSPEND_STATE. Signed-off-by: Xu Qiang <xuqiang36@huawei.com> [maz: added warning on resume, rewrote commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201107104226.14282-1-xuqiang36@huawei.com
2020-11-22irqchip/exiu: Fix the index of fwspec for IRQ typeChen Baozi
Since fwspec->param_count of ACPI node is two, the index of IRQ type in fwspec->param[] should be 1 rather than 2. Fixes: 3d090a36c8c8 ("irqchip/exiu: Implement ACPI support") Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20201117032015.11805-1-cbz@baozis.org Cc: stable@vger.kernel.org
2020-11-08Merge tag 'irq-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Fix the fallout of the IPI as interrupt conversion in Kconfig and the BCM2836 interrupt chip driver - Fixes for interrupt affinity setting and the handling of hierarchical irq domains in the SiFive PLIC driver - Make the unmapped event handling in the TI SCI driver work correctly - A few minor fixes and cleanups in various chip drivers and Kconfig" * tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events irqchip/ti-sci-inta: Add support for unmapped event handling dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm irqchip/sifive-plic: Fix chip_data access within a hierarchy irqchip/sifive-plic: Fix broken irq_set_affinity() callback irqchip/stm32-exti: Add all LP timer exti direct events support irqchip/bcm2836: Fix missing __init annotation irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY irqchip/mst: Make mst_intc_of_init static irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7 genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
2020-11-01irqchip/ti-sci-inta: Add support for unmapped event handlingPeter Ujfalusi
The DMA (BCDMA/PKTDMA and their rings/flows) events are under the INTA's supervision as unmapped events in AM64. In order to keep the current SW stack working, the INTA driver must replace the dev_id with it's own when a request comes for BCDMA or PKTDMA resources. Implement parsing of the optional "ti,unmapped-event-sources" phandle array to get the sci-dev-ids of the devices where the unmapped events originate. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201020073243.19255-3-peter.ujfalusi@ti.com
2020-11-01irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlmGeert Uytterhoeven
Get rid of the separate flag to indicate if the IRLM bit is present in the INTC/Interrupt Control Register 0, by considering -1 an invalid irlm_bit value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201028153955.1736767-1-geert+renesas@glider.be
2020-11-01irqchip/sifive-plic: Fix chip_data access within a hierarchyGreentime Hu
The plic driver crashes in plic_irq_unmask() when the interrupt is within a hierarchy, as it picks the top-level chip_data instead of its local one. Using irq_data_get_irq_chip_data() instead of irq_get_chip_data() solves the issue for good. Fixes: f1ad1133b18f ("irqchip/sifive-plic: Add support for multiple PLICs") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> [maz: rewrote commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20201029023738.127472-1-greentime.hu@sifive.com
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25irqchip/sifive-plic: Fix broken irq_set_affinity() callbackGreentime Hu
An interrupt submitted to an affinity change will always be left enabled after plic_set_affinity() has been called, while the expectation is that it should stay in whatever state it was before the call. Preserving the configuration fixes a PWM hang issue on the Unleashed board. [ 919.015783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 919.020922] rcu: 0-...0: (0 ticks this GP) idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=105807 [ 919.030295] (detected by 1, t=225825 jiffies, g=1561, q=3496) [ 919.036109] Task dump for CPU 0: [ 919.039321] kworker/0:1 R running task 0 30 2 0x00000008 [ 919.046359] Workqueue: events set_brightness_delayed [ 919.051302] Call Trace: [ 919.053738] [<ffffffe000930d92>] __schedule+0x194/0x4de [ 982.035783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 982.040923] rcu: 0-...0: (0 ticks this GP) idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=113325 [ 982.050294] (detected by 1, t=241580 jiffies, g=1561, q=3509) [ 982.056108] Task dump for CPU 0: [ 982.059321] kworker/0:1 R running task 0 30 2 0x00000008 [ 982.066359] Workqueue: events set_brightness_delayed [ 982.071302] Call Trace: [ 982.073739] [<ffffffe000930d92>] __schedule+0x194/0x4de [..] Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> [maz: tidy-up commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20201020081532.2377-1-greentime.hu@sifive.com
2020-10-25irqchip/stm32-exti: Add all LP timer exti direct events supportFabrice Gasnier
Add all remaining LP timer exti direct events, e.g. for LP Timer 2 to 5. LP timer 1 is already listed (e.g. exti 47). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1602859219-15684-2-git-send-email-fabrice.gasnier@st.com
2020-10-25irqchip/bcm2836: Fix missing __init annotationMarc Zyngier
bcm2836_arm_irqchip_smp_init() calls set_smp_ipi_range(), which has an __init annotation. Make sure the caller has the same annotation. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-16irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHYMarc Zyngier
Now that GENERIC_IRQ_IPI selects IRQ_DOMAIN_HIERARCHY, there is no need to have this conditional select for IRQ_MIPS_CPU. Similarily, MIPS_GIC only needs selecting GENERIC_IRQ_IPI. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-15irqchip/mst: Make mst_intc_of_init staticMarc Zyngier
mst_intc_of_init has no external caller, so let's make it static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-15irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7Geert Uytterhoeven
The MStar interrupt controller is only found on MStar, SigmaStar, and Mediatek SoCs. Hence add dependencies on ARCH_MEDIATEK and ARCH_MSTARV7, to prevent asking the user about the MStar interrupt controller driver when configuring a kernel without support for MStar, SigmaStar, and Mediatek SoCs. Fixes: ad4c938c92af9130 ("irqchip/irq-mst: Add MStar interrupt controller support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Daniel Palmer <daniel@thingy.jp> Link: https://lore.kernel.org/r/20201014131703.18021-1-geert+renesas@glider.be
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-13memblock: implement for_each_reserved_mem_region() using __next_mem_region()Mike Rapoport
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-10Merge branch 'irq/mstar' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-10irqchip/irq-mst: Add MStar interrupt controller supportMark-PK Tsai
Add MStar interrupt controller support using hierarchy irq domain. Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Daniel Palmer <daniel@thingy.jp> Link: https://lore.kernel.org/r/20200902063344.1852-2-mark-pk.tsai@mediatek.com
2020-10-10Merge branch 'irq/irqchip-fixes' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-06Merge branch 'irq/qcom-pdc-wakeup' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-06irqchip/qcom-pdc: Reset PDC interrupts during initMaulik Shah
Kexec can directly boot into a new kernel without going to complete reboot. This can leave the previous kernel's configuration for PDC interrupts as is. Clear previous kernel's configuration during init by setting interrupts in enable bank to zero. The IRQs specified in qcom,pdc-ranges property are the only ones that can be used by the new kernel so clear only those IRQs. The remaining ones may be in use by a different kernel and should not be set by new kernel. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-7-git-send-email-mkshah@codeaurora.org
2020-10-06irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flagMaulik Shah
Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the wakeirqs during suspend entry. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-6-git-send-email-mkshah@codeaurora.org
2020-09-28Merge branch 'irq/ipi-as-irq', remote-tracking branches 'origin/irq/dw' and ↵Marc Zyngier
'origin/irq/owl' into irq/irqchip-next Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-25irqchip: Add Actions Semi Owl SIRQ controllerCristian Ciocaltea
This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700 and S900) and provides support for handling up to 3 external interrupt lines. Each line can be independently configured as interrupt and triggers on either of the edges or either of the levels. Additionally, each line can also be masked individually. Co-developed-by: Parthiban Nallathambi <pn@denx.de> Co-developed-by: Saravanan Sekar <sravanhome@gmail.com> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1a010ef0eb78831b5657d74a0fcdef7a8efb2ec4.1600114378.git.cristian.ciocaltea@gmail.com
2020-09-25irqchip/dw-apb-ictl: Add primary interrupt controller supportZhen Lei
Add support to use dw-apb-ictl as primary interrupt controller. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [maz: minor fixups] Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Haoyu Lv <lvhaoyu@huawei.com> Link: https://lore.kernel.org/r/20200924071754.4509-4-thunder.leizhen@huawei.com
2020-09-25irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domainsZhen Lei
Add the required abstractions that will help introducing hierarchical domain support to the dw-apb-ictl driver. No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [maz: commit message, some cleanups] Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Haoyu Lv <lvhaoyu@huawei.com> Link: https://lore.kernel.org/r/20200924071754.4509-3-thunder.leizhen@huawei.com
2020-09-24irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without ↵Jonathan Cameron
processor or memory Note this crash is present before any of the patches in this series, but as explained below it is highly unlikely anyone is shipping a firmware that causes it. Tests were done using an overriden SRAT. On ARM64, the gic-v3 driver directly parses SRAT to locate GIC Interrupt Translation Service (ITS) Affinity Structures. This is done much later in the boot than the parses of SRAT which identify proximity domains. As a result, an ITS placed in a proximity domain that is not defined by another SRAT structure will result in a NUMA node that is not completely configured and a crash. ITS [mem 0x202100000-0x20211ffff] ITS@0x0000000202100000: Using ITS number 0 Unable to handle kernel paging request at virtual address 0000000000001a08 ... Call trace: __alloc_pages_nodemask+0xe8/0x338 alloc_pages_node.constprop.0+0x34/0x40 its_probe_one+0x2f8/0xb18 gic_acpi_parse_madt_its+0x108/0x150 acpi_table_parse_entries_array+0x17c/0x264 acpi_table_parse_entries+0x48/0x6c acpi_table_parse_madt+0x30/0x3c its_init+0x1c4/0x644 gic_init_bases+0x4b8/0x4ec gic_acpi_init+0x134/0x264 acpi_match_madt+0x4c/0x84 acpi_table_parse_entries_array+0x17c/0x264 acpi_table_parse_entries+0x48/0x6c acpi_table_parse_madt+0x30/0x3c __acpi_probe_device_table+0x8c/0xe8 irqchip_init+0x3c/0x48 init_IRQ+0xcc/0x100 start_kernel+0x33c/0x548 ACPI 6.3 allows any set of Affinity Structures in SRAT to define a proximity domain. However, as we do not see this crash, we can conclude that no firmware is currently placing an ITS in a node that is separate from those containing memory and / or processors. We could modify the SRAT parsing behavior to identify the existence of Proximity Domains unique to the ITS structures, and handle them as a special case of a generic initiator (once support for those merges). This patch avoids the complexity that would be needed to handle this corner case, by not allowing the ITS entry parsing code to instantiate new NUMA Nodes. If one is encountered that does not already exist, then NO_NUMA_NODE is assigned and a warning printed just as if the value had been greater than allowed NUMA Nodes. "SRAT: Invalid NUMA node -1 in ITS affinity" Whilst this does not provide the full flexibility allowed by ACPI, it does fix the problem. We can revisit a more sophisticated solution if needed by future platforms. Change is simply to replace acpi_map_pxm_to_node with pxm_to_node reflecting the fact a new mapping is not created. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/ipi-as-irq' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-v3-nmi-ns' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/dev_err_probe' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/misc-5.10' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Cleanup Franken-GIC handlingMarc Zyngier
Introduce a static key identifying Samsung's unique creation, allowing to replace the indirect call to compute the base addresses with a simple test on the static key. Faster, cheaper, negative diffstat. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Provide mask/unmask dummy methods for IPIsMarc Zyngier
Although it doesn't seem possible to disable individual mailbox interrupts, we still need to provide some callbacks. Fixes: 09eb672ce4fb ("irqchip/bcm2836: Configure mailbox interrupts as standard interrupts") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/armada-370-xp: Configure IPIs as standard interruptsMarc Zyngier
To introduce IPIs as standard interrupts to the Armada 370-XP driver, let's allocate a completely separate irqdomain and irqchip combo that lives parallel to the "standard" one. This effectively should be modelled as a chained interrupt controller, but the code is in such a state that it is pretty hard to shoehorn, as it would require the rewrite of the MSI layer as well. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/hip04: Configure IPIs as standard interruptsMarc Zyngier
In order to switch the hip04 driver to provide standard interrupts for IPIs, rework the way interrupts are allocated, making sure the irqdomain covers the SGIs as well as the rest of the interrupt range. The driver is otherwise so old-school that it creates all interrupts upfront (duh!), so there is hardly anything else to change, apart from communicating the IPIs to the arch code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Configure mailbox interrupts as standard interruptsMarc Zyngier
In order to switch the bcm2836 driver to privide standard interrupts for IPIs, it first needs to stop lying about the way things work. The mailbox interrupt is actually a multiplexer, with enough bits to store 32 pending interrupts per CPU. So let's turn it into a chained irqchip. Once this is done, we can instanciate the corresponding IPIs, and pass them to the architecture code. Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 19:29:46 +0000