summaryrefslogtreecommitdiff
path: root/drivers/lightnvm
AgeCommit message (Collapse)Author
2015-12-29lightnvm: wrong offset in bad blk lun calculationMatias Bjørling
dev->nr_luns reports the total number of luns available in a device while dev->luns_per_chnl is the number of luns per channel. When multiple channels are available, the offset is calculated from a channel and lun id into a linear array. As it multiplies with the total number of luns, we go out of bound when channel id > 0 and causes the kernel to panic when we read a protected kernel memory area. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: do not compile in debugging by defaultMatias Bjørling
The LightNVM module exposes a debug interface when CONFIG_NVM_DEBUG is set. This interfaces takes a string to configure media managers and targets. Make sure this interface is only exposed when chosen deliberately. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: prevent gennvm module unload on useMatias Bjørling
After the gennvm module has been initialized. It might be attached to one or several devices. In that case, the module is in use. Make sure that it can not be unloaded. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: fix media mgr registrationMatias Bjørling
This patch fixes two issues during media manager registration. 1. The ppa pool can be used at media manager registration. Allocate the ppa pool before that. 2. If a media manager can't be found, this should not lead to the device being unallocated. A media manager can be registered later, that can manage the device. Only warn if a media manager fails initialization. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: replace req queue with nvmdev for lldMatias Bjørling
In the case where a request queue is passed to the low lever lightnvm device drive integration, the device driver might pass its admin commands through another queue. Instead pass nvm_dev, and let the low level drive the appropriate queue. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: refactor spin_unlock in gennvm_get_blkWenwei Tao
The spin_unlock is duplicated multiple times. Jump to a single unlock to improve the code flow. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: put blks when luns configure failedWenwei Tao
Put the allocated blocks back to the free list when the luns configure failed, to make these blocks useable to others. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07lightnvm: use flags in rrpc_get_blkWenwei Tao
rrpc_get_blk use constant 0 as the input parameter of nvm_get_blk, this may result in getting gc block failed unexpectedly. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29lightnvm: missing nvm_lock acquireWenwei Tao
To avoid race conditions, traverse dev, media manager, and target lists and also register, unregister entries to/from them, should be always under the nvm_lock control. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29lightnvm: unconverted ppa returned in get_bb_tblMatias Bjørling
The get_bb_tbl function takes ppa as a generic address, which is converted to the ppa device address within the device driver. When the update_bbtbl callback is called from get_bb_tbl, the device specific ppa is used, instead of the generic ppa. Make sure to pass the generic ppa. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29lightnvm: do device max sectors boundary check firstWenwei Tao
do device max_phys_sect boundary check first, otherwise we will allocate dma_pools for devices whose max sectors are beyond lightnvm support and register them. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29lightnvm: fix ioctl memory leaksSudip Mukherjee
If copy_to_user() fails we returned error but we missed releasing devices. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29lightnvm: free memory when gennvm register failsWenwei Tao
free allocated nvm block and gennvm lun structures when gennvm register fails, otherwise it will cause memory leak. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: add free and bad lun info to show lunsJavier Gonzalez
Add free block, used block, and bad block information to the show debug interface. This information is used to debug how targets track blocks. Also, change debug function name to make it more generic. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: keep track of block countsJavier Gonzalez
Maintain number of in use blocks, free blocks, and bad blocks in a per lun basis. This allows the upper layers to get information about the state of each lun. Also, account for blocks reserved to the device on the free block count. nr_free_blocks matches now the actual number of blocks on the free list when the device is booted. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: missing free on init errorMatias Bjørling
If either max_phys_sect is out of bound, the nvm_dev structure is not freed. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: wrong return value and redundant freeWenwei Tao
The return value should be non-zero under error conditions. Remove nvme_free(dev) to avoid free dev more than once. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: cleanup queue before target removalJavier González
This prevents outstanding IOs to be sent for completion to target after the target has been removed. The flow is now: stop new IOs > cleanup queue > remove target. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: remove linear and device addr modesMatias Bjørling
The linear and device specific address modes can be replaced with a simple offset and bit length conversion that is generic across all devices. This both simplifies the specification and removes the special case for qemu nvme, that previously relied on the linear address mapping. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: prevent double free on init errorMatias Bjørling
Both the nvm_register and nvm_init does a kfree(dev) on error. Make sure to only free it once. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: prematurely activate nvm_devMatias Bjørling
We register with nvm_devices when there registration can still fail. Move the final registration at the end of the nvm_register function to make sure we are fully registered when added to the nvm_devices list. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: check for NAND flash and its typeMatias Bjørling
Only NAND flash with SLC and MLC is supported. Make sure to not try to initialize TLC memory or other non-volatile memory types. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16lightnvm: update bad block table formatMatias Bjørling
The specification was changed to reflect a multi-value bad block table. Instead of bit-based bad block table, the bad block table now allows eight bad block categories. Currently four are defined: * Factory bad blocks * Grown bad blocks * Device-side reserved blocks * Host-side reserved blocks The factory and grown bad blocks are the regular bad blocks. The reserved blocks are either for internal use or external use. In particular, the device-side reserved blocks allows the host to bootstrap from a limited number of flash blocks. Reducing the flash blocks to scan upon super block initialization. Support for both get bad block table and set bad block table is added. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-03lightnvm: refactor phys addrs type to u64Matias Bjørling
For cases where CONFIG_LBDAF is not set. The struct ppa_addr exceeds its type on 32 bit architectures. ppa_addr requires a 64bit integer to hold the generic ppa format. We therefore refactor it to u64 and replaces the sector_t usages with u64 for physical addresses. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29rrpc: Round-robin sector target with cost-based gcMatias Bjørling
This target allows an Open-Channel SSD to be exposed asas a block device. It implements a round-robin approach for sector allocation, together with a greedy cost-based garbage collector. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29gennvm: Generic NVM managerMatias Bjørling
The implementation for Open-Channel SSDs is divided into media management and targets. This patch implements a generic media manager for open-channel SSDs. After a media manager has been initialized, single or multiple targets can be instantiated with the media managed as the backend. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29lightnvm: Support for Open-Channel SSDsMatias Bjørling
Open-channel SSDs are devices that share responsibilities with the host in order to implement and maintain features that typical SSDs keep strictly in firmware. These include (i) the Flash Translation Layer (FTL), (ii) bad block management, and (iii) hardware units such as the flash controller, the interface controller, and large amounts of flash chips. In this way, Open-channels SSDs exposes direct access to their physical flash storage, while keeping a subset of the internal features of SSDs. LightNVM is a specification that gives support to Open-channel SSDs LightNVM allows the host to manage data placement, garbage collection, and parallelism. Device specific responsibilities such as bad block management, FTL extensions to support atomic IOs, or metadata persistence are still handled by the device. The implementation of LightNVM consists of two parts: core and (multiple) targets. The core implements functionality shared across targets. This is initialization, teardown and statistics. The targets implement the interface that exposes physical flash to user-space applications. Examples of such targets include key-value store, object-store, as well as traditional block devices, which can be application-specific. Contributions in this patch from: Javier Gonzalez <jg@lightnvm.io> Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Jesper Madsen <jmad@itu.dk> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>