summaryrefslogtreecommitdiff
path: root/drivers/media/platform/stm32
AgeCommit message (Collapse)Author
2022-03-18media: platform: place stm32/ and sti/ under st/ dirMauro Carvalho Chehab
As the end goal is to have platform drivers split by vendor, move both stm32/ and sti/ for them to be inside st/ directory. Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-18media: platform: stm32: move config to its own fileMauro Carvalho Chehab
In order to better organize the platform/Kconfig, place stm32-specific config stuff on a separate Kconfig file. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.hLaurent Pinchart
To prepare for usage of the v4l2_fwnode_bus_* data structures to describe bus configuration in the subdev .get_mbus_config() operation, rename the structures with a v4l2_mbus_config_ prefix instead of v4l2_fwnode_bus_, and move them to v4l2_mediabus.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: stm32-dma2d: Use platform_get_irq() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: stm32: dcmi: create a dma scatterlist based on DMA max_sg_burst valueAlain Volmat
Prior to submitting a transfer to the DMA, the client should first check the capabilities of the DMA channel in term of maximum of each segment. This is given by the max_sg_burst value reported by dma_get_slave_caps API. Based on that, if the transfer is larger than what can be handled by the DMA channel, we split the transfer into several scatterlist elements. [hverkuil: fix checkpatch parenthesis alignment warning] Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-11-15media: stm32-dma2d: fix compile errors when W=1Dillon Min
remove unused functions to avoid compile errors when W=1. >> drivers/media/platform/stm32/dma2d/dma2d-hw.c:29:20: error: unused function 'reg_set' [-Werror,-Wunused-function] static inline void reg_set(void __iomem *base, u32 reg, u32 mask) >> drivers/media/platform/stm32/dma2d/dma2d-hw.c:34:20: error: unused function 'reg_clear' [-Werror,-Wunused-function] static inline void reg_clear(void __iomem *base, u32 reg, u32 mask) Fixes: bff6e3e2f4c9 ("media: stm32-dma2d: STM32 DMA2D driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15media: stm32-dma2d: STM32 DMA2D driverDillon Min
This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit of STMicroelectronics STM32 SoC series. Currently support r2m, m2m, m2m_pfc functions. - r2m, Filling a part or the whole of a destination image with a specific color. - m2m, Copying a part or the whole of a source image into a part or the whole of a destination. - m2m_pfc, Copying a part or the whole of a source image into a part or the whole of a destination image with a pixel format conversion. [hverkuil: fix typo in commit log] Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30media: stm32: Potential NULL pointer dereference in dcmi_irq_thread()Dmitriy Ulitin
At the moment of enabling irq handling: 1922 ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback, 1923 dcmi_irq_thread, IRQF_ONESHOT, 1924 dev_name(&pdev->dev), dcmi); there is still uninitialized field sd_format of struct stm32_dcmi *dcmi. If an interrupt occurs in the interval between the installation of the interrupt handler and the initialization of this field, NULL pointer dereference happens. This field is dereferenced in the handler function without any check: 457 if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG && 458 dcmi->misr & IT_FRAME) { The patch moves interrupt handler installation after initialization of the sd_format field that happens in dcmi_graph_notify_complete() via dcmi_set_default_fmt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Dmitriy Ulitin <ulitin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30media: v4l: async: Rename async nf functions, clean up long linesSakari Ailus
Rename V4L2 async notifier functions, replacing "notifier" with "nf" and removing "_subdev" at the end of the function names adding subdevs as you can only add subdevs to a notifier. Also wrap and otherwise clean up long lines. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (imx7) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-20media: stm32: use pm_runtime_resume_and_get()Mauro Carvalho Chehab
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-06media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() APILaurent Pinchart
The functions that add an async subdev to an async subdev notifier take as an argument the size of the container structure they need to allocate. This is error prone, as passing an invalid size will not be caught by the compiler. Wrap those functions in macros that take a container type instead of a size, and cast the returned pointer to the desired type. The compiler will catch mistakes if the incorrect type is passed to the macro, as the assignment types won't match. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> (core+ti-cal) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: stm32: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. This results in removal of the now unneeded driver-specific state struct dcmi_graph_entity, keeping track of just the source subdevice. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: stm32-dcmi: add support of BT656 busHugues Fruchet
Add support of BT656 embedded synchronization bus. This mode allows to save hardware synchro lines hsync & vsync by replacing them with synchro codes embedded in data stream. This bus type is only compatible with 8 bits width data bus. Due to reserved values 0x00 & 0xff used for synchro codes, valid data vary from 0x1 to 0xfe, this is up to sensor to clip accordingly pixel data. As a consequence of this clipping, JPEG is not supported with this bus type. DCMI crop feature is also not available with this bus type. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: add 8-bit Bayer formats supportAlain Volmat
Add BA81, GBRG, GRBG, RGGB formats in the list of supported capture formats. Signed-off-by: Alain Volmat <alain.volmat@st.com> Acked-by: Hugues FRUCHET <hugues.fruchet@st.com> Reviewed-by: Philippe CORNU <philippe.cornu@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: remove deprecated dmaengine_terminate_all()Hugues Fruchet
Replace dmaengine_terminate_all() by dmaengine_terminate_sync() to ensure that all pending dma operations are really finished. This is not ensured by dmaengine_terminate_all() and this API is deprecated, so better to use the _sync() variant. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by: Philippe CORNU <philippe.cornu@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: stm32-dcmi: don't print an error on probe deferralEtienne Carriere
Change stm32-dcmi driver to not print an error message when the device probe operation is deferred. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: stm32-dcmi: Fix a reference count leakQiushi Wu
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Thus replace the jump target "err_release_buffers" by "err_pm_putw". Fixes: 152e0bf60219 ("media: stm32-dcmi: add power saving support") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-15media: move CEC platform drivers to a separate directoryMauro Carvalho Chehab
As CEC support doesn't depend on MEDIA_SUPPORT, let's place the platform drivers outside the media menu. As a side effect, instead of depends on PCI, seco driver can select it (and DMI). Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: platform: stm32: don't print an error on probe deferralEtienne Carriere
Change stm32-cec driver to not print an error message when the device probe operation is deferred. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: platform: stm32: defer probe for auxiliary clockEtienne Carriere
Change stm32-cec driver to defer probe when auxiliary clock "hdmi-cec" is registered in the system not has not been probed yet. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil
'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: stm32-dcmi: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-08-29media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()Markus Elfring
A null pointer would be passed to a call of the function “of_node_put” immediately after a call of the function “of_graph_get_next_endpoint” failed at one place. Remove this superfluous function call. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-19media: stm32-dcmi: add support of several sub-devicesHugues Fruchet
Add support of several sub-devices within pipeline instead of a single one. This allows to support a CSI-2 camera sensor connected through a CSI-2 to parallel bridge. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-19media: stm32-dcmi: add media controller supportHugues Fruchet
Add media controller support to dcmi in order to walk within remote subdevices pipeline. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-19media: stm32-dcmi: trace the supported fourcc/mbus_codeHugues Fruchet
Add a trace of the set of supported fourcc/mbus_code which intersect between DCMI and source sub-device. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-19media: stm32-dcmi: improve sensor subdev namingHugues Fruchet
Rename "subdev" entity struct field to "source" to prepare for several subdev support. Move asd field on top of entity struct. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-07media: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: stm32-dcmi: fix irq = 0 caseFabien Dessenne
Manage the irq = 0 case, where we shall return an error. Fixes: b5b5a27bee58 ("media: stm32-dcmi: return appropriate error codes during probe") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reported-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30media: stm32-dcmi: return appropriate error codes during probeFabien Dessenne
During probe, return the provided errors value instead of -ENODEV. This allows the driver to be deferred probed if needed. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: stm32-dcmi: fix crash when subdev do not expose any formatsHugues Fruchet
Do not access sd_formats[] if num_of_sd_formats is zero, ie subdev sensor didn't expose any formats. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: stm32-dcmi: do not emit error trace in case of few overrunHugues Fruchet
Report overrun error only when it exceeds a given threshold. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: stm32-dcmi: fix error messagesHugues Fruchet
Revisit and add some error messages. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: platform: stm32: wait end of transmissionYannick Fertre
It is mandatory to write CEC_CFGR only when CECEN=0. To protect transmission, a check have been added to delayed logical address modification. This patch is necessary tp pass all tests of compliance. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: stm32-dcmi: fix DMA corruption when stopping streamingHugues Fruchet
Avoid call of dmaengine_terminate_all() between dmaengine_prep_slave_single() and dmaengine_submit() by locking the whole DMA submission sequence. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: stm32-dcmi: fix check of pm_runtime_get_sync return valueHugues Fruchet
Start streaming was sometimes failing because of pm_runtime_get_sync() non-0 return value. In fact return value was not an error but a positive value (1), indicating that PM was already enabled. Fix this by going to error path only with negative return value. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01media: platform: fix several typosMauro Carvalho Chehab
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Yong Deng <yong.deng@magewell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zeroSakari Ailus
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: platform: Switch to v4l2_async_notifier_add_subdevSteve Longerbeam
Switch all media platform drivers to call v4l2_async_notifier_add_subdev() to add asd's to a notifier, in place of referencing the notifier->subdevs[] array. These drivers also must now call v4l2_async_notifier_init() before adding asd's to their notifiers. There may still be cases where a platform driver maintains a list of asd's that is a duplicate of the notifier asd_list, in which case its possible the platform driver list can be removed, and can reference the notifier asd_list instead. One example of where a duplicate list has been removed in this patch is xilinx-vipp.c. If there are such cases remaining, those drivers should be optimized to remove the duplicate platform driver asd lists. None of the changes to the platform drivers in this patch have been tested. Verify that the async subdevices needed by the platform are bound at load time, and that the driver unloads and reloads correctly with no memory leaking of asd objects. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: stm32-dcmi: only enable IT frame on JPEG captureHugues Fruchet
Only enable IT frame on JPEG capture, this saves some CPU interruptions and processing on all the other cases. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: stm32-dcmi: add power saving supportHugues Fruchet
Implements runtime & system sleep power management ops. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: stm32-dcmi: simplify of_node_put usageNicholas Mc Guire
This does not fix any bug - this is just a code simplification. As np is not used after passing it to v4l2_fwnode_endpoint_parse() its refcount can be decremented immediately and at one location. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: stm32-dcmi: add mandatory of_node_put() in success pathNicholas Mc Guire
The endpoint allocated by of_graph_get_next_endpoint() needs an of_node_put() in both error and success path. As ep is not used the refcount decrement can be right after the last use of ep. Fixes: commit 37404f91ef8b ("[media] stm32-dcmi: STM32 DCMI camera interface driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: stm32-dcmi: drop unnecessary while(1) loopNicholas Mc Guire
The while(1) is effectively useless as all possible paths within it return thus there is no way to loop. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: stm32-dcmi: revisit stop streaming opsHugues Fruchet
Do not wait for interrupt completion when stopping streaming, stopping sensor and disabling interruptions are enough. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 04:31:17 +0000