Age | Commit message (Collapse) | Author |
|
[ Upstream commit be7e8af98f3af729aa9f08b1053f9533a5cceb91 ]
When a request is re-inited it will release all control handler
objects that are still in the request. It does that by unbinding
and putting all those objects. When the object is unbound the
obj->req pointer is set to NULL, and the object's unbind op is
called. When the object it put the object's release op is called
to free the memory.
For a request object that contains a control handler that means
that v4l2_ctrl_handler_free() is called in the release op.
A control handler used in a request has a pointer to the main
control handler that is created by the driver and contains the
current state of all controls. If the device is unbound (due to
rmmod or a forced unbind), then that main handler is freed, again
by calling v4l2_ctrl_handler_free(), and any outstanding request
objects that refer to that main handler have to be unbound and put
as well.
It does that by this test:
if (!hdl->req_obj.req && !list_empty(&hdl->requests)) {
I.e. the handler has no pointer to a request, so is the main
handler, and one or more request objects refer to this main
handler.
However, this test is wrong since hdl->req_obj.req is actually
NULL when re-initing a request (the object unbind will set req to
NULL), and the only reason this seemingly worked is that the
requests list is typically empty since the request's unbind op
will remove the handler from the requests list.
But if another thread is at the same time adding a new control
to a request, then there is a race condition where one thread
is removing a control handler object from the requests list and
another thread is adding one. The result is that hdl->requests
is no longer empty and the code thinks that a main handler is
being freed instead of a control handler that is part of a request.
There are two bugs here: first the test for hdl->req_obj.req: this
should be hdl->req_obj.ops since only the main control handler will
have a NULL pointer there.
The second is that adding or deleting request objects from the
requests list of the main handler isn't protected by taking the
main handler's lock.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: John Cox <jc@kynesim.co.uk>
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Tested-by: John Cox <jc@kynesim.co.uk>
Reported-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd90caa0111e178b52b21e56364bc2244a3973b3 ]
Move incrementing/decrementing runtime PM count to
imx219_start_streaming()/imx219_stop_streaming() functions respectively.
This fixes an issue of unbalanced runtime PM count in resume callback
error path where streaming is stopped and runtime PM count is left
unbalanced.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
from imx219_set_stream
[ Upstream commit 745d4612d2c853c00abadbf69799c8aee7f99c39 ]
Move out locking/unlocking of vflip and hflip controls from
imx219_set_stream() to the imx219_start_streaming()/
imx219_stop_streaming() respectively.
This fixes an issue in resume callback error path where streaming is
stopped and the controls are left in locked state.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9baa3d64e8e2373ddd11c346439e5dfccb2cbb0d ]
There a 3 array for-loops that don't check the upper bounds of the
index into arrays and this may lead to potential out-of-bounds
reads. Fix this by adding array size upper bounds checks to be
full safe.
Addresses-Coverity: ("Out-of-bounds read")
Link: https://lore.kernel.org/linux-media/20201007121628.20676-1-colin.king@canonical.com
Fixes: 333829110f1d ("[media] m88rs6000t: add new dvb-s/s2 tuner for integrated chip M88RS6000")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e61f9ea271933d987ab895c689fa37744f6fc27f ]
In case of error, the function i2c_new_dummy_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
sun6i_video_start_streaming()
[ Upstream commit f3d384e36630e2a552d874e422835606d9cf230a ]
When sun6i_video_remote_subdev() returns NULL to subdev, no error return
code of sun6i_video_start_streaming() is assigned.
To fix this bug, ret is assigned with -EINVAL in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 5cc7522d8965 ("media: sun6i: Add support for Allwinner CSI V3s")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a465c5391a856a0c1e9554964d660676c35d1b2 ]
If an error occurs after a successful 'of_icc_get()' call, it must be
undone.
Use 'devm_of_icc_get()' instead of 'of_icc_get()' to avoid the leak.
Update the remove function accordingly and axe the now unneeded
'icc_put()' calls.
Fixes: 32f0a6ddc8c9 ("media: venus: Use on-chip interconnect API")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3536169f8531c2c5b153921dc7d1ac9fd570cda7 ]
Video engine uses eclk and vclk for its clock sources and its reset
control is coupled with eclk so the current clock enabling sequence works
like below.
Enable eclk
De-assert Video Engine reset
10ms delay
Enable vclk
It introduces improper reset on the Video Engine hardware and eventually
the hardware generates unexpected DMA memory transfers that can corrupt
memory region in random and sporadic patterns. This issue is observed
very rarely on some specific AST2500 SoCs but it causes a critical
kernel panic with making a various shape of signature so it's extremely
hard to debug. Moreover, the issue is observed even when the video
engine is not actively used because udevd turns on the video engine
hardware for a short time to make a query in every boot.
To fix this issue, this commit changes the clock handling logic to make
the reset de-assertion triggered after enabling both eclk and vclk. Also,
it adds clk_unprepare call for a case when probe fails.
clk: ast2600: fix reset settings for eclk and vclk
Video engine reset setting should be coupled with eclk to match it
with the setting for previous Aspeed SoCs which is defined in
clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
driver. Also, reset bit 6 is defined as 'Video Engine' reset in
datasheet so it should be de-asserted when eclk is enabled. This
commit fixes the setting.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e56429b09d5e0802b86f84ec7c24025886c9f88b ]
The new AMD IOMMU DMA implementation concatenates sglist entries under
certain conditions, and because saa7146 accessed the length member
directly, it did not support this scenario.
This fixes IO_PAGE_FAULTs by using the sg_dma_len macro.
Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e1cb753c04d74e06d7ca826ea0bcb02526af03e ]
The new AMD IOMMU DMA implementation concatenates sglist entries under
certain conditions, and because saa7134 accessed the length member
directly, it did not support this scenario.
This fixes IO_PAGE_FAULTs and choppy DMA audio by using the
sg_dma_len macro.
Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5cde22fcc7271812a7944c47b40100df15908358 ]
Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise
mask and the following statement should be bit-wise or'ing in the new flag
bits but instead is making a direct assignment. Fix this by using the |=
operator rather than an assignment.
Addresses-Coverity: ("Unused value")
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 834124c596e2dddbbdba06620835710ccca32fd0 upstream.
The Venus v1 behaves differently comparing with the other Venus
version in respect to capability parsing and when they are send
to the driver. So we don't need to initialize hfi parser for
multiple invocations like what we do for > v1 Venus versions.
Fixes: 10865c98986b ("media: venus: parser: Prepare parser for multiple invocations")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac34b79da14d67a9b494f6125186becbd067e225 upstream.
When controls are used together with the Request API, then for
each request a v4l2_ctrl_handler struct is allocated. This contains
the controls that can be set in a request. If a control is *not* set in
the request, then the value used in the most recent previous request
must be used, or the current value if it is not found in any outstanding
requests.
The framework tried to find such a previous request and it would set
the 'req' pointer in struct v4l2_ctrl_ref to the v4l2_ctrl_ref of the
control in such a previous request. So far, so good. However, when that
previous request was applied to the hardware, returned to userspace, and
then userspace would re-init or free that request, any 'ref' pointer in
still-queued requests would suddenly point to freed memory.
This was not noticed before since the drivers that use this expected
that each request would always have the controls set, so there was
never any need to find a control in older requests. This requirement
was relaxed, and now this bug surfaced.
It was also made worse by changeset
2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req")
which increased the chance of this happening.
The use of the 'req' pointer in v4l2_ctrl_ref was very fragile, so
drop this entirely. Instead add a valid_p_req bool to indicate that
p_req contains a valid value for this control. And if it is false,
then just use the current value of the control.
Note that VIDIOC_G_EXT_CTRLS will always return -EACCES when attempting
to get a control from a request until the request is completed. And in
that case, all controls in the request will have the control value set
(i.e. valid_p_req is true). This means that the whole 'find the most
recent previous request containing a control' idea is pointless, and
the code can be simplified considerably.
The v4l2_g_ext_ctrls_common() function was refactored a bit to make
it more understandable. It also avoids updating volatile controls
in a completed request since that was already done when the request
was completed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req")
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Cc: <stable@vger.kernel.org> # for v5.9 and up
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13a79f14ab285120bc4977e00a7c731e8143f548 upstream.
dvb_usb_device_init() allocates a dvb_usb_device object, but it
doesn't release the object by itself even at errors. The object is
released in the callee side (dvb_usb_init()) in some error cases via
dvb_usb_exit() call, but it also missed the object free in other error
paths. And, the caller (it's only dvb_usb_device_init()) doesn't seem
caring the resource management as well, hence those memories are
leaked.
This patch assures releasing the memory at the error path in
dvb_usb_device_init(). Now dvb_usb_init() frees the resources it
allocated but leaves the passed dvb_usb_device object intact. In
turn, the dvb_usb_device object is released in dvb_usb_device_init()
instead.
We could use dvb_usb_exit() function for releasing everything in the
callee (as it was used for some error cases in the original code), but
releasing the passed object in the callee is non-intuitive and
error-prone. So I took this approach (which is more standard in Linus
kernel code) although it ended with a bit more open codes.
Along with the change, the patch makes sure that USB intfdata is reset
and don't return the bogus pointer to the caller of
dvb_usb_device_init() at the error path, too.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c49206786ee252f28b7d4d155d1fff96f145a05d upstream.
dvb_usb_device_init() copies the properties to the own data, so that
the callers can release the original properties later (as done in the
commit 299c7007e936 ("media: dw2102: Fix memleak on sequence of
probes")). However, it also stores dev->desc pointer that is a
reference to the original properties data. Since dev->desc is
referred later, it may result in use-after-free, in the worst case,
leading to a kernel Oops as reported.
This patch addresses the problem by allocating and copying the
properties at first, then get the desc from the copied properties.
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181104
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf9a40ae8d722f281a2721779595d6df1c33a0bf upstream.
dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn`
before setting it to NULL, as documented in include/media/media-device.h:
"The media_entity instance itself must be freed explicitly by the driver
if required."
Link: https://syzkaller.appspot.com/bug?id=9bbe4b842c98f0ed05c5eed77a226e9de33bf298
Link: https://lore.kernel.org/linux-media/20201211083039.521617-1-yepeilin.cs@gmail.com
Cc: stable@vger.kernel.org
Fixes: 0230d60e4661 ("[media] dvbdev: Add RF connector if needed")
Reported-by: syzbot+7f09440acc069a0d38ac@syzkaller.appspotmail.com
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7c6e405e171fb33990a12ecfd14e6500d9e5cf2 upstream.
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4f4e6644cd876c844cdb3bea2dd7051787d5ae25 ]
For two of the supported sensors the stv06xx driver allocates memory which
is stored in sd->sensor_priv. This memory is freed on a disconnect, but if
the probe() fails, then it isn't freed and so this leaks memory.
Add a new probe_error() op that drivers can use to free any allocated
memory in case there was a probe failure.
Thanks to Pavel Skripkin <paskripkin@gmail.com> for discovering the cause
of the memory leak.
Reported-and-tested-by: syzbot+e7f4c64a4248a0340c37@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7cd0da982e3043f2eec7235ac5530cb18d6af1d ]
syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().
for (n = 0; n < d->props.num_adapters; n++) {
....
if ((ret = dvb_usb_adapter_stream_init(adap)) ||
(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
(ret = dvb_usb_adapter_frontend_init(adap))) {
return ret;
}
...
d->num_adapters_initialized++;
...
}
In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:
for (n = 0; n < d->num_adapters_initialized; n++)
So, allocated objects won't be freed.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1995d5e43cf897f63b4d7a7f84a252d891ae820 ]
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69306a947b3ae21e0d1cbfc9508f00fec86c7297 ]
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a15275b6a18597079f18241c87511406575179a ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f820ab5d4eebfe2d970d32a76ae496a6c286f0f ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c9541720c66899adf6f3600984cf3ef151295ad ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa56f5f1fe31c2050675fa63b84963ebd504a5b3 ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6107a4fdf8554a7aa9488bdc835bb010062fa8a9 ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 443ec4bbc6116f6f492a7a1282bfd8422c862158 ]
The EDID had a few mistakes as reported by edid-decode:
Block 1, CTA-861 Extension Block:
Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1.
Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.
Fixed those.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ae10a7dc8992ee682ff0b1752ff7c83d472eef1 ]
If some error occurs, URB buffers should also be freed. If they aren't
freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB
buffers as dvb is set to NULL. The function in which error occurs should
do all the cleanup for the allocations it had done.
Tested the patch with the reproducer provided by syzbot. This patch
fixes the memleak.
Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eaaea4681984c79d2b2b160387b297477f0c1aab ]
act_len can be uninitialized if usb_bulk_msg() returns an error.
Set it to 0 to avoid a KMSAN error.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+a4e309017a5f3a24c7b3@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c759b2970c561e3b56aa030deb13db104262adfe ]
Add a fix for the memory leak bugs that can occur when the
saa7164_encoder_register() function fails.
The function allocates memory without explicitly freeing
it when errors occur.
Add a better error handling that deallocate the unused buffers before the
function exits during a fail.
Signed-off-by: Daniel Niv <danielniv3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24df8b74c8b2fb42c49ffe8585562da0c96446ff ]
When STA2X11_VIP is enabled, and GPIOLIB is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for VIDEO_ADV7180
Depends on [n]: MEDIA_SUPPORT [=y] && GPIOLIB [=n] && VIDEO_V4L2 [=y] && I2C [=y]
Selected by [y]:
- STA2X11_VIP [=y] && MEDIA_SUPPORT [=y] && MEDIA_PCI_SUPPORT [=y] && MEDIA_CAMERA_SUPPORT [=y] && PCI [=y] && VIDEO_V4L2 [=y] && VIRT_TO_BUS [=y] && I2C [=y] && (STA2X11 [=n] || COMPILE_TEST [=y]) && MEDIA_SUBDRV_AUTOSELECT [=y]
This is because STA2X11_VIP selects VIDEO_ADV7180
without selecting or depending on GPIOLIB,
despite VIDEO_ADV7180 depending on GPIOLIB.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28c7afb07ccfc0a939bb06ac1e7afe669901c65a ]
It's best if this condition is reported.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f09f9f93afad770a04b35235a0aa465fcc8d6e3d upstream.
The rc-cec keymap is unusual in that it can't be built as a module,
instead it is registered directly in rc-main.c if CONFIG_MEDIA_CEC_RC
is set. This is because it can be called from drm_dp_cec_set_edid() via
cec_register_adapter() in an asynchronous context, and it is not
allowed to use request_module() to load rc-cec.ko in that case. Trying to
do so results in a 'WARN_ON_ONCE(wait && current_is_async())'.
Since this keymap is only used if CONFIG_MEDIA_CEC_RC is set, we
just compile this keymap into the rc-core module and never as a
separate module.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 2c6d1fffa1d9 (drm: add support for DisplayPort CEC-Tunneling-over-AUX)
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac8d82f586c8692b501cb974604a71ef0e22a04c upstream.
RZ/G2L SoC has only BRS. This patch fixes null pointer access,when only
BRS is enabled.
Fixes: cbb7fa49c7466("media: v4l: vsp1: Rename BRU to BRx")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6732f313938027a910e1f7351951ff52c0329e70 upstream.
RZ/G2L SoC has no UIF. This patch fixes null pointer access, when UIF
module is not used.
Fixes: 5e824f989e6e8("media: v4l: vsp1: Integrate DISCOM in display pipeline")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a7e27fd5cd696ba564a3f62cedef7269cfd0723 upstream.
usbtv doesn't support power management, so on system suspend the
.disconnect callback of the driver is called. The teardown sequence
includes a call to snd_card_free. Its implementation waits until the
refcount of the sound card device drops to zero, however, if its file is
open, snd_card_file_add takes a reference, which can't be dropped during
the suspend, because the userspace processes are already frozen at this
point. snd_card_free waits for completion forever, leading to a hang on
suspend.
This commit fixes this deadlock condition by replacing snd_card_free
with snd_card_free_when_closed, that doesn't wait until all references
are released, allowing suspend to progress.
Fixes: 63ddf68de52e ("[media] usbtv: add audio support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dbf0b3a7b719eb3f72cb53c2ce7d34a012a9c261 ]
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit
RiSC engine sometimes stalls, requiring a reset.
As result, MythTV and w-scan won't scan channels on the AMD Kaveri
APU with the Hauppauge QuadHD TV tuner card.
For the solution I added the Input/Output Memory Management Unit's PCI
Identity of 0x1423 to the broken_dev_id[] array, which is used by
a quirks logic meant to fix similar problems with other AMD
chipsets.
Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@protonmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream.
When an IOCTL with argument size larger than 128 that also used array
arguments were handled, two memory allocations were made but alas, only
the latter one of them was released. This happened because there was only
a single local variable to hold such a temporary allocation.
Fix this by adding separate variables to hold the pointers to the
temporary allocations.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com
Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]
Avoid an underflow while calculating the number of inputs for entities
with zero pads.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 048c96e28674f15c0403deba2104ffba64544a06 upstream.
If a menu has more than 64 items, then don't check menu_skip_mask
for items 65 and up.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9dec0f48a75e0dadca498002d25ef4e143e60194 upstream.
prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.
Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6532923237b427ed30cc7b4486f6f1ccdee3c647 upstream.
After the first IR message, interrupts are no longer received. In addition,
the code generates a timeout IR message of 10ms but sets the timeout value
to 100ms, so no timeout was ever generated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204317
Fixes: a49a7a4635de ("media: smipcie: add universal ir capability")
Tested-by: Laz Lev <lazlev@web.de>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 655ae29da72a693cf294bba3c3322e662ff75bd3 upstream.
Writing to REG_CLKCTRL with the power off causes a hang. Enable the
device first.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 334de4b45892f7e67074e1b1b2ac36fd3e091118 upstream.
Loop was useless as it would always exit on the first iteration. Fix
it with right condition.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Fixes: a86cf9b29e8b ("media: ipu3-cio2: Validate mbus format in setting subdev format")
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v4.16 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4487e0215560392bd11c9de08d60824d72c89cd9 upstream.
This device is also supported.
Cc: stable@vger.kernel.org
Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e88ccf09e79cf33cac40316ba69c820d9eebc82b upstream.
The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size max9286_asd, otherwise access to max9286_asd->source will go to
unallocated memory.
Fixes: 86d37bf31af6 ("media: i2c: max9286: Allocate v4l2_async_subdev dynamically")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b43bad31fb0e00f45baf5b05bd21eb8d8ce7f58 upstream.
When processing a MCE_RSP_GETPORTSTATUS command, the bit index to set in
ir->txports_cabled comes from response data, and isn't validated.
As ir->txports_cabled is a u8, nothing should be done if the bit index
is greater than 7.
Cc: stable@vger.kernel.org
Reported-by: syzbot+ec3b3128c576e109171d@syzkaller.appspotmail.com
Signed-off-by: James Reynolds <jr@memlen.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dc9455ffae02d7b7fb51ba1e007fffcb9dc5d890 ]
The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.
The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767
Fixes: 8a652a17e3c0 ("media: uvcvideo: Ensure all probed info is returned to v4l2")
Reported-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 031b9212eeee365443aaef013360ea6cded7b2c4 ]
When DEBUG is defined this error occurs
drivers/media/platform/pxa_camera.c:1410:7: error:
‘i’ undeclared (first use in this function)
for (i = 0; i < vb->num_planes; i++)
^
The variable 'i' is missing, so declare it.
Fixes: 6f28435d1c15 ("[media] media: platform: pxa_camera: trivial move of functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a04e187d231086a1313fd635ac42bdbc997137ad ]
When DEBUG is defined this error occurs
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:306:41:
error: ‘i’ undeclared (first use in this function)
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[VENC_SYS]);
Reviewing the old line
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[i]);
All the i's need to be changed to VENC_SYS.
Fix a similar error for VENC_LT_SYS.
Fixes: 0dc4b3286125 ("media: mtk-vcodec: venc: support SCP firmware")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|