summaryrefslogtreecommitdiff
path: root/drivers/mfd/sec-irq.c
AgeCommit message (Collapse)Author
2019-05-14mfd: sec: Add support for the RTC on S2MPA01Stuart Menefy
The RTC portion of the S2MPA01 appears to have the same register layout as the S2MPS14. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: sec-core: Allow building as moduleKrzysztof Kozlowski
The main MFD driver for Samsung PMICs (S2MPSXX, S5M876X) used with Exynos SoCs can be compiled and used as a module. The dependent clock, regulator and RTC drivers already can be built as a module. Building entire set of drivers as modules might require using initial ramdisk and can make booting process longer (due to probe deferrals). However adding such option is useful for testing and for multi-platform configurations. This also add required module authors to sec-irq.c file based on recent main contributors. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: sec-core: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-23mfd: sec: Add support for S2MPS15 PMICThomas Abraham
Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-09mfd: sec: Fix RTC alarm interrupt number on S2MPS11Krzysztof Kozlowski
The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of RTC alarms 0 and 1 were inversed between these two devices. So when rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to S2MPS11_IRQ_RTCA1, not RTCA0. Fix this by using consistent RTC alarm interrupt numbers and adding a BUILD_BUG_ON for future generations. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: sec-core: Add support for S2MPS13 deviceChanwoo Choi
This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/ RTC/CLOCK devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: sec-core: Add support for S2MPU02 deviceChanwoo Choi
Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: sec-core: Remove duplicated device type from sec_pmic_devKrzysztof Kozlowski
The device type was stored in sec_pmic_dev state container twice: - unsigned long type (initialized from of_device_id or i2c_device_id) - int device_type (initialized as above or from board files when there is no DTS) The 'type' field was never used outside of probe so it can be safely removed. Change also the device_type in sec_pmic_dev and sec_platform_data to unsigned long to avoid any casts. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec: Add support for S2MPS14Krzysztof Kozlowski
Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexesKrzysztof Kozlowski
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding interrupts are named similarly). Use consistent names for interrupts to limit possible errors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sec: Constify regmap configs and regmap irqsKrzysztof Kozlowski
Add "const" to "static struct regmap_irq" and "static struct regmap_config". Acked-by: Sangbeom Kim <sbkim73@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-12mfd/rtc: s5m: fix register updating by adding regmap for RTCKrzysztof Kozlowski
Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and add new regmap for RTC. On S5M8767A registers were not properly updated and read due to usage of the same regmap as the PMIC. This could be observed in various hangs, e.g. in infinite loop during waiting for UDR field change. On this chip family the RTC has different I2C address than PMIC so additional regmap is needed. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-26mfd: sec: Fix reg_offset for interrupt registersInderpal Singh
reg_offset is offset of the status/mask registers. Now, since status_base and mask_base are pointing to corresponding first registers, reg_offset should start from 0 otheriwse regmap_add_irq_chip will fail during probe. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Add s2mps11 irq driverSangbeom Kim
This patch support irq handling driver for s2mps11. As this patch use regmap_irq, s5m8767 and s5m8763 are modified with regmap_irq. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Modify samsung mfd headerSangbeom Kim
As Prefix of Samsung pmic changed from s5m to s2m, To make common mfd driver for s2m and s5m series, This patch rename header of Samsung mfd and modify mfd driver. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Modify samsung mfd driver for common apiSangbeom Kim
Previous naming rule of samsung pmic start with s5m prefix. But It is changed by s2m. To cover various samsung s2m and s5m series, This patch modify function and variable name for common usage. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Rename s5m file and directories to samsungSangbeom Kim
Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>