summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2015-01-09mfd: viperboard: Fix platform-device id collisionJohan Hovold
commit b6684228726cc25551a43f5c0bd9c5f977f10f48 upstream. Allow more than one viperboard to be connected by registering with PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE. The subdevices are currently registered with PLATFORM_DEVID_NONE, which will cause a name collision on the platform bus when a second viperboard is plugged in: viperboard 1-2.4:1.0: version 0.00 found at bus 001 address 004 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 181 at /home/johan/work/omicron/src/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x74/0x84() sysfs: cannot create duplicate filename '/bus/platform/devices/viperboard-gpio' Modules linked in: i2c_viperboard viperboard netconsole [last unloaded: viperboard] CPU: 0 PID: 181 Comm: bash Tainted: G W 3.17.0-rc6 #1 [<c0016bf4>] (unwind_backtrace) from [<c0013860>] (show_stack+0x20/0x24) [<c0013860>] (show_stack) from [<c04305f8>] (dump_stack+0x24/0x28) [<c04305f8>] (dump_stack) from [<c0040fb4>] (warn_slowpath_common+0x80/0x98) [<c0040fb4>] (warn_slowpath_common) from [<c004100c>] (warn_slowpath_fmt+0x40/0x48) [<c004100c>] (warn_slowpath_fmt) from [<c016f1bc>] (sysfs_warn_dup+0x74/0x84) [<c016f1bc>] (sysfs_warn_dup) from [<c016f548>] (sysfs_do_create_link_sd.isra.2+0xcc/0xd0) [<c016f548>] (sysfs_do_create_link_sd.isra.2) from [<c016f588>] (sysfs_create_link+0x3c/0x48) [<c016f588>] (sysfs_create_link) from [<c02867ec>] (bus_add_device+0x12c/0x1e0) [<c02867ec>] (bus_add_device) from [<c0284820>] (device_add+0x410/0x584) [<c0284820>] (device_add) from [<c0289440>] (platform_device_add+0xd8/0x26c) [<c0289440>] (platform_device_add) from [<c02a5ae4>] (mfd_add_device+0x240/0x344) [<c02a5ae4>] (mfd_add_device) from [<c02a5ce0>] (mfd_add_devices+0xb8/0x110) [<c02a5ce0>] (mfd_add_devices) from [<bf00d1c8>] (vprbrd_probe+0x160/0x1b0 [viperboard]) [<bf00d1c8>] (vprbrd_probe [viperboard]) from [<c030c000>] (usb_probe_interface+0x1bc/0x2a8) [<c030c000>] (usb_probe_interface) from [<c028768c>] (driver_probe_device+0x14c/0x3ac) [<c028768c>] (driver_probe_device) from [<c02879e4>] (__driver_attach+0xa4/0xa8) [<c02879e4>] (__driver_attach) from [<c0285698>] (bus_for_each_dev+0x70/0xa4) [<c0285698>] (bus_for_each_dev) from [<c0287030>] (driver_attach+0x2c/0x30) [<c0287030>] (driver_attach) from [<c030a288>] (usb_store_new_id+0x170/0x1ac) [<c030a288>] (usb_store_new_id) from [<c030a2f8>] (new_id_store+0x34/0x3c) [<c030a2f8>] (new_id_store) from [<c02853ec>] (drv_attr_store+0x30/0x3c) [<c02853ec>] (drv_attr_store) from [<c016eaa8>] (sysfs_kf_write+0x5c/0x60) [<c016eaa8>] (sysfs_kf_write) from [<c016dc68>] (kernfs_fop_write+0xd4/0x194) [<c016dc68>] (kernfs_fop_write) from [<c010fe40>] (vfs_write+0xb4/0x1c0) [<c010fe40>] (vfs_write) from [<c01104a8>] (SyS_write+0x4c/0xa0) [<c01104a8>] (SyS_write) from [<c000f900>] (ret_fast_syscall+0x0/0x48) ---[ end trace 98e8603c22d65817 ]--- viperboard 1-2.4:1.0: Failed to add mfd devices to core. viperboard: probe of 1-2.4:1.0 failed with error -17 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-01-09mfd: stmpe: Fix STMPE24xx GPMR LSBLinus Walleij
commit 871c3cf4ea7d5baf58e0a40bce7431ca5525aa2a upstream. The least significat byte of the GPIO value read register on the STMPE24xx series is on addres 0xA4 not 0xA5. Correct against datasheet and tested on the STMPE2401 hardware. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-01-07mfd: tc6393xb: Fail ohci suspend if full state restore is requiredDmitry Eremin-Solenikov
commit 1a5fb99de4850cba710d91becfa2c65653048589 upstream. Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-11-13mfd: rtsx_pcr: Fix MSI enable error handlingChris Ball
commit 5152970538a5e16c03bbcb9f1c780489a795ed40 upstream. pci_enable_msi() can return failure with both positive and negative integers -- it returns 0 for success -- but is only tested here for "if (ret < 0)". This causes us to try to use MSI on the RTS5249 SD reader in the Dell XPS 11 when enabling MSI failed, causing: [ 1.737110] rtsx_pci: probe of 0000:05:00.0 failed with error -110 Reported-by: D. Jared Dominguez <Jared_Dominguez@Dell.com> Tested-by: D. Jared Dominguez <Jared_Dominguez@Dell.com> Signed-off-by: Chris Ball <chris@printf.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-09-17mfd: omap-usb-host: Fix improper mask use.Michael Welling
commit 46de8ff8e80a6546aa3d2fdf58c6776666301a0c upstream. single-ulpi-bypass is a flag used for older OMAP3 silicon. The flag when set, can excite code that improperly uses the OMAP_UHH_HOSTCONFIG_UPLI_BYPASS define to clear the corresponding bit. Instead it clears all of the other bits disabling all of the ports in the process. Signed-off-by: Michael Welling <mwelling@emacinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02mfd: sm501: dbg_regs attribute must be read-onlyGuenter Roeck
commit 8a8320c2e78d1b619a8fa8eb5ae946b8691de604 upstream. Fix: sm501 sm501: SM501 At b3e00000: Version 050100a0, 8 Mb, IRQ 100 Attribute dbg_regs: write permission without 'store' ------------[ cut here ]------------ WARNING: at drivers/base/core.c:620 dbg_regs does not have a write function and must therefore be marked as read-only. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: kempld-core: Fix potential hang-up during bootGuenter Roeck
commit 204747c970c0d568721c76ab8a57dde0e5dcf0d5 upstream. On PXT and COMe-cPC2 boards it is observed that the hardware mutex is acquired but not being released during initialization. This can result in a hang-up during boot if the driver is built into the kernel. Releasing the mutex twice if it was acquired fixes the problem. Subsequent request/release cycles work as expected, so the fix is only needed during initialization. Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: tps65910: Fix possible invalid pointer dereference on ↵Krzysztof Kozlowski
regmap_add_irq_chip fail commit 483e2dfdbc94751430e41db9973985f5b054d322 upstream. Fixes: 4aab3fadad32 ("mfd: tps65910: Move interrupt implementation code to mfd file") tps65910_irq_init() sets 'tps65910->chip_irq' before calling regmap_add_irq_chip(). If the regmap_add_irq_chip() call fails in memory allocation of regmap_irq_chip_data members then: 1. The 'tps65910->chip_irq' will still hold some value 2. 'tps65910->irq_data' will be pointing to already freed memory (because regmap_add_irq_chip() will free it on error) This results in invalid memory access during driver remove because the tps65910_irq_exit() tests whether 'tps65910->chip_irq' is not zero. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit 97dc4ed3fa377ec91bb60ba98b70d645c2099384 upstream. During probe the driver allocates dummy I2C devices for RTC, haptic and MUIC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit ed26f87b9f71693a1d1ee85f5e6209601505080f upstream. During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit 96cf3dedc491d2f1f66cc26217f2b06b0c7b6797 upstream. During probe the driver allocates dummy I2C devices for RTC and ADC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit ad09dd6a1f5d6244bd89314015af506ba7f9810a upstream. During probe the driver allocates dummy I2C devices for MUIC and haptic with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() and i2c_unregister_device(). If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit b9e183a1d495cd65412abe0f9df19b151716bfe7 upstream. During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: 88pm800: Fix I2C device resource leak if probe failsKrzysztof Kozlowski
commit 141050cf3d84fc303df58796d68dc1376b0e8f67 upstream. During probe the driver allocates two dummy I2C devices for subchips in function pm800_pages_init(). Additionally this function allocates regmaps for these subchips. If any of these steps fail then these dummy I2C devices are not freed and resources leak. On pm800_pages_init() fail the driver must call pm800_pages_exit() to unregister dummy I2C devices. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: 88pm860x: Fix I2C device resource leak on regmap init failKrzysztof Kozlowski
commit a7ab1c8b261305af583ce26bb4a14f555fdaa73e upstream. During probe the driver allocates dummy I2C device for companion chip and then allocates a regmap for it. If regmap_init_i2c() fails then the I2C driver (allocated with i2c_new_dummy()) is not freed and this resource leaks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: 88pm860x: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit 159ce52a6b777fc82fa0b51c7440e25f9e4c6feb upstream. During probe the driver allocates dummy I2C device for companion chip with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by regmap_init_i2c(). If i2c_new_dummy() fails for companion device, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy errorKrzysztof Kozlowski
commit 65aba1e04916d72b30c028730a1e31860c225412 upstream. During probe the sec-core driver allocates dummy I2C device for RTC with i2c_new_dummy() but return value is not checked. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() or i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: da9055: Fix device registration of PMIC and CODEC devicesAdam Thomson
commit 07b0e5b10258b48e5edfb6c8ac156f05510eb775 upstream. Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-06mfd: max77686: Fix regmap resource leak on driver removeKrzysztof Kozlowski
commit 74142ffc0b52cfe6f9d2f6f34a5f3eedbfe3ce51 upstream. The regmap used by max77686 MFD driver was not freed with regmap_exit() on driver exit. This lead to leak of resources. Replace regmap_init_i2c() call in driver probe with initialization of managed register map so the regmap will be properly freed by the device management code. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15mfd: rtsx_pcr: Disable interrupts before cancelling delayed worksThomas Gleixner
commit 73beb63d290f961c299526852884846b0d868840 upstream. This fixes a kernel panic when resuming from suspend to RAM. Without this fix an interrupt hits after the delayed work is canceled and thus requeues it. So we end up freeing an armed timer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04mfd: rtsx: Modify rts5249_optimize_phyWei WANG
commit 26b818511c6562ce372566c219a2ef1afea35fe6 upstream. In some platforms, specially Thinkpad series, rts5249 won't be initialized properly. So we need adjust some phy parameters to improve the compatibility issue. It is a little different between simulation and real chip. We have no idea about which configuration is better before tape-out. We set default settings according to simulation, but need to tune these parameters after getting the real chip. I can't explain every change in detail here. The below information is just a rough description: PHY_REG_REV: Disable internal clkreq_tx, enable rx_pwst PHY_BPCR: No change, just turn the magic number to macro definitions PHY_PCR: Change OOBS sensitivity, from 60mV to 90mV PHY_RCR2: Control charge-pump current automatically PHY_FLD4: Use TX cmu reference clock PHY_RDR: Change RXDSEL from 30nF to 1.9nF PHY_RCR1: Change the duration between adp_st and asserting cp_en from 0.32 us to 0.64us PHY_FLD3: Adjust internal timers PHY_TUNE: Fine tune the regulator12 output voltage Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCHJames Ralston
commit 5e90169c5a02da69a1ef721bea7a823e9e48fcb6 upstream. This patch adds the TCO Watchdog Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07Merge tag 'mfd-3.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD (multi-function device) updates from Samuel Ortiz: "For the 3.12 merge window we have one new driver for the DA9063 PMIC from Dialog Semiconductor. Besides that driver we also have: - Device tree support for the s2mps11 driver - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010, wl1273 and pcf50633-adc drivers. - A conversion to threaded IRQ and IRQ domain for the twl6030 driver. - A fairly big update for the rtsx driver: Better power saving support, better vendor settings handling, and a few fixes. - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the Kontron driver. - A conversion to the dev_get_platdata() API for all MFD drivers. - A removal of non-DT (legacy) support for the twl6040 driver. - A few fixes and additions (Mic detect level) to the wm5110 register tables. - Regmap support for the davinci_voicecodec driver. - The usual bunch of minor cleanups and janitorial fixes" * tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits) mfd: ucb1x00-core: Rewrite ucb1x00_add_dev() mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs mfd: timberdale: Use module_pci_driver mfd: timberdale: Remove redundant break mfd: timberdale: Staticize local variables mfd: ab8500-debugfs: Staticize local variables mfd: db8500-prcmu: Staticize clk_mgt mfd: db8500-prcmu: Use ANSI function declaration mfd: omap-usb-host: Staticize usbhs_driver_name mfd: 88pm805: Fix potential NULL pdata dereference mfd: 88pm800: Fix potential NULL pdata dereference mfd: twl6040: Use regmap for register cache mfd: davinci_voicecodec: Provide a regmap for register I/O mfd: davinci_voicecodec: Remove unused read and write functions mmc: memstick: rtsx: Modify copyright comments mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail mfd: mmc: rtsx: Change default tx phase mfd: pcf50633-adc: Use devm_*() functions mfd: rtsx: Copyright modifications ...
2013-09-06Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC low-priority fixes from Olof Johansson: "This branch contains a handful of fixes for various platforms that weren't serious enough to be included in late 3.11-rc releases. Most of them are for minor cleanups and cosmetic fixes. There's also a bit of code removal here, one board file removal for clps711x, and removal of some legacy device creation on OMAP2+" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start' ARM: OMAP2: remove useless variable 'ret' ARM: OMAP: dma: fix error return code in omap_system_dma_probe() ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards ARM: OMAP2: Use a consistent AM33XX SoC option description ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC ARM: clps711x: edb7211: Remove extra iotable_init() call ARM: clps711x: autcpu12: Remove incorrect config checking ARM: clps711x: Drop fortunet board support ARM: clps711x: Remove the special name for the syscon driver ARM: dts: Fix memory node in skeleton64.dtsi ARM: Keystone: Convert device tree file to use IRQ defines ARM: keystone: use #include to include skeleton.dtsi ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc() ARM: Keystone: No need to preserve r12 across smc call ARM: keystone: remove redundant smp_init_cpus definition ARM: keystone: drop useless HAVE_SCHED_CLOCK ARM: dove: fix missing __init section of dove_mpp_gpio_mode ARM: shmobile: armadillo800eva-reference: fix compiler warning ...
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-09-02mfd: ucb1x00-core: Rewrite ucb1x00_add_dev()Lee Jones
Error handling is on-its-head in this function. After invoking a function we should examine the return code and return the error value if there was one. Instead, this function checks for success and goes onto provide functionality if success was received. Not so bad in a simple function like this, but in a more complex one this could end up drowning in curly brackets. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for ↵Lee Jones
event name The AB8500 debugfs driver allocates memory to contain the name of a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate address NULL with the specified device name which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfsLee Jones
The AB8500 debugfs driver allocates memory for a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate NULL->[show|store|...], which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: timberdale: Use module_pci_driverSachin Kamat
module_pci_driver removes some boilerplate and makes the code simple. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: timberdale: Remove redundant breakSachin Kamat
break after goto is unreachable. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: timberdale: Staticize local variablesSachin Kamat
Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Staticize local variablesSachin Kamat
Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: db8500-prcmu: Staticize clk_mgtSachin Kamat
clk_mgt is used only in this file. Make it static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: db8500-prcmu: Use ANSI function declarationSachin Kamat
Silences the following warning: drivers/mfd/db8500-prcmu.c:2322:25: warning: non-ANSI function declaration of function 'prcmu_ac_sleep_req' Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: omap-usb-host: Staticize usbhs_driver_nameSachin Kamat
usbhs_driver_name is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: 88pm805: Fix potential NULL pdata dereferenceChao Xie
User pass platform data to device, and platform data may be NULL. Add the check for pdata. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-02mfd: 88pm800: Fix potential NULL pdata dereferenceChao Xie
User pass platform data to device, and platform data may be NULL. Add the check for pdata. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-02Merge branch 'topic/for-asoc'Samuel Ortiz
2013-09-02mfd: twl6040: Use regmap for register cacheMark Brown
Rather then open coding a cache of the vibra control registers use the regmap cache code. Also cache the interrupt mask register, providing a small performance improvement for the interrupt code. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-02mfd: davinci_voicecodec: Provide a regmap for register I/OMark Brown
This will be used to support refactoring of the ASoC CODEC driver to use a regmap. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-02mfd: davinci_voicecodec: Remove unused read and write functionsMark Brown
These functions are not referenced anywhere, nor prototyped, so just remove them. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mfd: mmc: rtsx: Change default tx phaseWei WANG
The default phase can meet most cards' requirement, but it is not the optimal one. In some extreme situation, the rx phase point produced by the following tuning process will drift quite a distance. Before tuning UHS card, this patch will set a more proper initial tx phase point, which is calculated from statistic data, and can achieve a much better tx signal quality. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-27PCI: Rename PCIe capability definitions to follow conventionBjorn Helgaas
All other PCIe capability register fields include "PCI_EXP" + <reg-name> + <field-name>. This renames PCI_EXP_OBFF_MASK, PCI_EXP_IDO_REQ_EN, PCI_EXP_LTR_EN, and related fields using the same convention. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> # for MFD driver
2013-08-21Merge tag 'mfd-lee-3.12-1' of git://git.linaro.org/people/ljones/mfdSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20mfd: pcf50633-adc: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-20mfd: rtsx: Copyright modificationsWei WANG
Update copyright date, remove author address and add Roger Tseng. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20mfd: rtsx: Configure to enter a deeper power-saving mode in S3Wei WANG
Set a bit to enable rts5227 and rts5249 to enter a deeper internal power-saving mode in S3, and recover it after resuming. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20mfd: rtsx: Clear hardware PFM mode in rtl8411bWei WANG
Clear hw_pfm_en to disable hardware PFM mode, to fix a bug that in some situation registers in 0xFDxx domain can't be accessed. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20mfd: rtsx: Move some actions from rtsx_pci_init_hw to individual extra_init_hwWei WANG
These actions are individual for each reader model, so should be put in extra_init_hw instead of rtsx_pci_init_hw. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 04:37:19 +0000