summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2022-04-08mmc: core: improve API to make clear mmc_hw_reset is for cardsWolfram Sang
To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-07mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is completeWolfram Sang
When HS400 tuning is complete and HS400 is going to be activated, we have to keep the current number of TAPs and should not overwrite them with a hardcoded value. This was probably a copy&paste mistake when upporting HS400 support from the BSP. Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: renesas_sdhi: special 4tap settings only apply to HS400Wolfram Sang
Previous documentation was vague, so we included SDR104 for slow SDnH clock settings. It turns out now, that it is only needed for HS400. Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling") Cc: stable@vger.kernel.org Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220404100508.3209-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: core: Fixup support for writeback-cache for eMMC and SDMichael Wu
During the card initialization process, the mmc core checks whether the eMMC/SD card supports an internal writeback-cache and then enables it inside the card. Unfortunately, this isn't according to what the mmc core reports to the upper block layer. Instead, the writeback-cache support with REQ_FLUSH and REQ_FUA, are being enabled depending on whether the host supports the CMD23 (MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command. This is wrong and it may also sound awkward. In fact, it's a remnant from when both eMMC/SD cards didn't have dedicated commands/support to control the internal writeback-cache. In other words, it was the best we could do at that point in time. To fix the problem, but also without breaking backwards compatibility, let's align the REQ_FLUSH support with whether the writeback-cache became successfully enabled - for both eMMC and SD cards. Cc: stable@kernel.org Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device") Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards") Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled") Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Michael Wu <michael@allwinnertech.com> Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com [Ulf: Re-wrote the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: block: Check for errors after write on SPIChristian Löhle
Introduce a SEND_STATUS check for writes through SPI to not mark an unsuccessful write as successful. Since SPI SD/MMC does not have states, after a write, the card will just hold the line LOW until it is ready again. The driver marks the write therefore as completed as soon as it reads something other than all zeroes. The driver does not distinguish from a card no longer signalling busy and it being disconnected (and the line being pulled-up by the host). This lead to writes being marked as successful when disconnecting a busy card. Now the card is ensured to be still connected by an additional CMD13, just like non-SPI is ensured to go back to TRAN state. While at it and since we already poll for the post-write status anyway, we might as well check for SPIs error bits (any of them). The disconnecting card problem is reproducable for me after continuous write activity and randomly disconnecting, around every 20-50 tries on SPI DS for some card. Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: mmci: stm32: correctly check all elements of sg listYann Gautier
Use sg and not data->sg when checking sg list elements. Else only the first element alignment is checked. The last element should be checked the same way, for_each_sg already set sg to sg_next(sg). Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20220317111944.116148-2-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"Pali Rohár
This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f. Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") contains proper fix for the issue described in commit bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning"). Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable") Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-28Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-23Merge tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Convert to sysfs_emit() in favor of sprintf() - Improve fallback to speed modes if eMMC HS200 fails MMC host: - dw_mmc: Allow variants to set minimal supported clock rate - dw-mmc-rockchip: Fix problems with invalid clock rates - litex_mmc: Add new DT based driver for the LiteX's LiteSDCard interface - litex_mmc: Add Gabriel Somlo and Joel Stanley as co-maintainers for LiteX - mtk-sd: Add support for the Mediatek MT8186 variant - renesas_sdhi: Add support for RZ/G2UL variant - renesas_sdhi: Add support for RZ/V2L variant - rtsx_pci: Adjust power-on sequence to conform to the SD spec - sdhci-am654: Add support for TI's AM62 variant - sdhci_am654: Fixup support for TI's AM64 variant - sdhci-esdhc-imx: Add support for the imx93 variant - sdhci-msm: Add support for the msm8953 variant - sdhci-pci-gli: Add support for runtime PM for the GL9763E variant - sdhci-pci-gli: Adjustments of the SSC function for the GL975x variants - sdhci-tegra: Add support for wake on SD card event - sunxi-mmc: Add support for Allwinner's F1c100s variant - sunxi-mmc: Add support for D1 MMC variant" * tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (37 commits) dt-bindings: mmc: renesas,sdhi: Document RZ/G2UL SoC mmc: tmio: remove outdated members from host struct mmc: mtk-sd: Silence delay phase calculation debug log mmc: davinci_mmc: Handle error for clk_enable mmc: sdhci-pci-gli: Add runtime PM for GL9763E mmc: core: Drop HS400 caps unless 8-bit bus is supported too mmc: host: Return an error when ->enable_sdio_irq() ops is missing mmc: core: Improve fallback to speed modes if eMMC HS200 fails dt-bindings: mmc: sunxi: add Allwinner F1c100s compatible mmc: dw-mmc-rockchip: Fix handling invalid clock rates mmc: dw_mmc: Support setting f_min from host drivers mmc: host: Drop commas after SoC match table sentinels mmc: rtsx: add 74 Clocks in power on flow dt-bindings: mmc: renesas,sdhi: Document RZ/V2L SoC mmc: sh_mmcif: Simplify division/shift logic mmc: sdhci_am654: Add Support for TI's AM62 SoC dt-bindings: mmc: imx-esdhc: Add imx93 compatible string dt-bindings: mmc: sdhci-am654: Add compatible string for AM62 SoC mmc: sdhci_am654: Fix the driver data of AM64 SoC mmc: core: use sysfs_emit() instead of sprintf() ...
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-15mmc: tmio: remove outdated members from host structWolfram Sang
The wrappers are gone for two years now but they have still pointers reserved in the tmio_mmc_host struct. Remove them. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: f22084b662e5 ("mmc: tmio: remove superfluous callback wrappers") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220311140542.5407-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: mtk-sd: Silence delay phase calculation debug logAlexandre Bailon
The driver prints the following log everytime data is written to RPMB: mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10] dev_info is used to print that log but it seems that log is only useful for debbuging. Use dev_dbg instead of dev_info. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220311103320.3072171-1-abailon@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: davinci_mmc: Handle error for clk_enableJiasheng Jiang
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220308071415.1093393-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: sdhci-pci-gli: Add runtime PM for GL9763EBen Chuang
Add runtime PM for GL9763E and disable PLL in runtime suspend. So power gated of upstream port can be enabled. GL9763E has an auxiliary power so it keep states in runtime suspend. In runtime resume, PLL is enabled and waits for it to stabilize. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Tested-by: Kevin Chang <kevin.chang@lcfuturecenter.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220307090009.1386876-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: core: Drop HS400 caps unless 8-bit bus is supported tooUlf Hansson
When mmc_select_hs400es() tries to switch to the HS400 ES mode, it may bail out early if the host doesn't support an 8-bit buswidth, as it's required for the HS400 mode. To improve the situation, let's instead drop the HS400 bits from the capability field if the 8-bit bus isn't supported. In this way, we allow the mmc initialization to continue by trying a lower speed mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220303165151.129806-1-ulf.hansson@linaro.org
2022-03-15mmc: host: Return an error when ->enable_sdio_irq() ops is missingUlf Hansson
Even if the current WARN() notifies the user that something is severely wrong, we can still end up in a PANIC() when trying to invoke the missing ->enable_sdio_irq() ops. Therefore, let's also return an error code and prevent the host from being added. While at it, move the code into a separate function to prepare for subsequent changes and for further host caps validations. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org
2022-03-15mmc: core: Improve fallback to speed modes if eMMC HS200 failsUlf Hansson
In the error path of mmc_select_hs200() we are trying our best to restore the card/host into a valid state. This makes sense, especially if we encounter a simple switch error (-EBADMSG). However, rather than then continue with using the legacy speed mode, let's try the other better speed modes first. Additionally, let's update the card->mmc_avail_type to avoid us from trying a broken HS200 mode again. In an Amlogic S905W based TV box where the switch to HS200 mode fails for the eMMC, this allows us to use the eMMC in DDR mode in favor of the legacy mode, which greatly improves the performance. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20220303164522.129583-1-ulf.hansson@linaro.org
2022-03-14Merge 5.17-rc8 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-07mmc: dw-mmc-rockchip: Fix handling invalid clock ratesPeter Geis
The Rockchip rk356x ciu clock cannot be set as low as the dw-mmc hardware supports. This leads to a situation during card initialization where the clock is set lower than the clock driver can support. The dw-mmc-rockchip driver spews errors when this happens. For normal operation this only happens a few times during boot, but when cd-broken is enabled (in cases such as the SoQuartz module) this fires multiple times each poll cycle. Fix this by testing the lowest possible frequency that the clock driver can support which is within the mmc specification. Divide that rate by the internal divider and set f_min to this. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220305215835.2210388-3-pgwipeout@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07mmc: dw_mmc: Support setting f_min from host driversPeter Geis
Host drivers may not be able to support frequencies as low as dw-mmc supports. Unfortunately f_min isn't available when the drv_data->init function is called, as the mmc_host struct hasn't been set up yet. Support the host drivers saving the requested minimum frequency, so we can later set f_min when it is available. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220305215835.2210388-2-pgwipeout@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07mmc: host: Drop commas after SoC match table sentinelsGeert Uytterhoeven
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Add comments to clarify the purpose of the empty elements. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/9050fa278eaaa9e6ec719a3b158a2fad285560d0.1646311673.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07Merge branch 'fixes' into nextUlf Hansson
2022-03-07mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_CONDUlf Hansson
Commit 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1"), significantly decreased the polling period from ~10-12ms into just a couple of us. The purpose was to decrease the total time spent in the busy polling loop, but unfortunate it has lead to problems, that causes eMMC cards to never gets out busy and thus fails to be initialized. To fix the problem, but also to try to keep some of the new improved behaviour, let's start by using a polling period of 1-2ms, which then increases for each loop, according to common polling loop in __mmc_poll_for_busy(). Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Huijin Park <huijin.park@samsung.com> Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/20220304105656.149281-1-ulf.hansson@linaro.org
2022-03-02mmc: rtsx: add 74 Clocks in power on flowRicky WU
SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-01mmc: rtsx: Fix build errors/warnings for unused variableUlf Hansson
The struct device *dev, is no longer needed at various functions, let's therefore drop it to fix the build errors/warnings. Fixes: 7570fb41e450 ("mmc: rtsx: Let MMC core handle runtime PM") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220301115300.64332-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28sdio_uart: make use of UART_LCR_WLEN() + tty_get_char_size()Jiri Slaby
Having a generic UART_LCR_WLEN() macro and the tty_get_char_size() helper, we can remove all those repeated switch-cases in drivers. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220224095558.30929-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge branch 'fixes' into nextUlf Hansson
2022-02-28mmc: sh_mmcif: Simplify division/shift logicGeert Uytterhoeven
"a / (1 << b)" == "a >> b". No change in generated code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/68d689c39c769d298b53ee8cb9de0e594a2999b2.1645460780.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci_am654: Add Support for TI's AM62 SoCAswath Govindraju
Add support for the controller present on the AM62x SoC. There are instances: sdhci0: 8bit bus width, max 200 MBps sdhci1: 4bit bus width, max 100 MBps sdhci2: 4bit bus width, max 100 MBps The PHY used for 8 bit instance is same as the PHY for the 4 bit instance. Therefore, introduce a new bus width independent compatible for AM62 SoC that uses the driver data required for 4 bit instance. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220218072840.5629-1-a-govindraju@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: meson: Fix usage of meson_mmc_post_req()Rong Chen
Currently meson_mmc_post_req() is called in meson_mmc_request() right after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request is actually finished. To fix, don't call meson_mmc_post_req() until meson_mmc_request_done(). Signed-off-by: Rong Chen <rong.chen@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci_am654: Fix the driver data of AM64 SoCAswath Govindraju
The MMCSD IPs used in AM64 are the same as the ones used in J721E. Therefore, fix this by using the driver data from J721E for AM64 too, for both 8 and 4 bit instances. Fixes: 754b7f2f7d2a ("mmc: sdhci_am654: Add Support for TI's AM64 SoC") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220211075056.26179-1-a-govindraju@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: core: use sysfs_emit() instead of sprintf()Sergey Shtylyov
sprintf() (still used in the MMC core for the sysfs output) is vulnerable to the buffer overflow. Use the new-fangled sysfs_emit() instead. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/717729b2-d65b-c72e-9fac-471d28d00b5a@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sunxi-mmc: Add D1 MMC variantSamuel Holland
D1's MMC controllers are unique in that they have the DMA address shift (like A100) with a 13-bit descriptor size field (like sun4i). Add the compatible and parameters for this new variant. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220203015112.12008-2-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: dw_mmc: Use device_property_string_array_count()Andy Shevchenko
Use device_property_string_array_count() to get number of strings in a string array property. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220202182450.54925-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: davinci: Use of_device_get_match_data() helperBean Huo
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-6-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-of-at91: Use of_device_get_match_data() helperBean Huo
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of open coding of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-5-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-tegra: Use of_device_get_match_data() helperBean Huo
Only the device data is needed,not the whole struct of_device_id. Use of_device_get_match_data() instead of open coding of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: wmt-sdmmc: Use of_device_get_match_data() helperBean Huo
Only the device data is needed, not the whole struct of_device_id. Use of_device_get_match_data() instead of open coding of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Add a switch to enable/disable SSC for GL9750 and GL9755Ben Chuang
Add a vendor-specific bit at the bit26 of GL9750's register 878h and GL9755's register 78h to decide whether to disable SSC function. If this bit is set, the SSC function will be disabled. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075406.36321-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Enable SSC at 50MHz and 100MHz for GL9750 and GL9755Ben Chuang
Enable SSC function at 50MHz and 100MHz for GL9750 and GL9755. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075339.36281-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Reduce the SSC value at 205MHz for GL9750 and GL9755Ben Chuang
The SSC value is 0xFFE7 at 205MHz and may be saturated. Reduce the SSC value to 0x5A1D at 205MHz to reduce this situation for GL9750 and GL9755. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075306.36262-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: Add driver for LiteX's LiteSDCard interfaceGabriel Somlo
LiteX (https://github.com/enjoy-digital/litex) is a SoC framework that targets FPGAs. LiteSDCard is a small footprint, configurable SDCard core commonly used in LiteX designs. The driver was first written in May 2020 and has been maintained cooperatively by the LiteX community. Thanks to all contributors! Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com> Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com> Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com> Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com> Co-developed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220113170300.3555651-4-gsomlo@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-tegra: Enable wake on SD card eventAniruddha Rao
Enable GPIO wake source on SD card detect line. Physical card insertion/removal event should wake the system from suspend. Signed-off-by: Aniruddha Rao <anrao@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1642050969-21152-1-git-send-email-anrao@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: dw_mmc: Fix potential null pointer riskWen Zhiwei
we previously assumed 'host->slot' could be null, null pointer judgment should be added Signed-off-by: Wen Zhiwei <wenzhiwei@kylinos.cn> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20211229023814.53372-1-wenzhiwei@kylinos.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28Merge 5.17-rc6 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge 5.17-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char-misc fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-22mmc: rtsx: Let MMC core handle runtime PMKai-Heng Feng
Since MMC core handles runtime PM reference counting, we can avoid doing redundant runtime PM work in the driver. That means the only thing commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") misses is to always enable runtime PM, to let its parent driver enable ASPM in the runtime idle routine. Fixes: 7499b529d97f ("mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220216055435.2335297-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17staging: wfx: apply the necessary SDIO quirks for the Silabs WF200Jérôme Pouiller
Until now, the SDIO quirks are applied directly from the driver. However, it is better to apply the quirks before driver probing. So, this patch relocate the quirks in the MMC framework. Note that the WF200 has no valid SDIO VID/PID. Therefore, we match DT rather than on the SDIO VID/PID. Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20220216093112.92469-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 22:20:29 +0000