summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2015-01-27mmc: sdhci: Set SDHCI_POWER_ON with external vmmcTim Kryger
commit 3cbc6123a93dc91b99b58f7ea37d267fe93e1cad upstream. Host controllers lacking the required internal vmmc regulator may still follow the spec with regard to the LSB of SDHCI_POWER_CONTROL. Set the SDHCI_POWER_ON bit when vmmc is enabled to encourage the controller to to drive CMD, DAT, SDCLK. This fixes a regression observed on some Qualcomm and Nvidia boards caused by 5222161 mmc: sdhci: Improve external VDD regulator support. Fixes: 52221610dd84 (mmc: sdhci: Improve external VDD regulator support) Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-16mmc: sdhci: Fix sleep in atomic after inserting SD cardKrzysztof Kozlowski
commit 2836766a9d0bd02c66073f8dd44796e6cc23848d upstream. Sleep in atomic context happened on Trats2 board after inserting or removing SD card because mmc_gpio_get_cd() was called under spin lock. Fix this by moving card detection earlier, before acquiring spin lock. The mmc_gpio_get_cd() call does not have to be protected by spin lock because it does not access any sdhci internal data. The sdhci_do_get_cd() call access host flags (SDHCI_DEVICE_DEAD). After moving it out side of spin lock it could theoretically race with driver removal but still there is no actual protection against manual card eject. Dmesg after inserting SD card: [ 41.663414] BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1511 [ 41.670469] in_atomic(): 1, irqs_disabled(): 128, pid: 30, name: kworker/u8:1 [ 41.677580] INFO: lockdep is turned off. [ 41.681486] irq event stamp: 61972 [ 41.684872] hardirqs last enabled at (61971): [<c0490ee0>] _raw_spin_unlock_irq+0x24/0x5c [ 41.693118] hardirqs last disabled at (61972): [<c04907ac>] _raw_spin_lock_irq+0x18/0x54 [ 41.701190] softirqs last enabled at (61648): [<c0026fd4>] __do_softirq+0x234/0x2c8 [ 41.708914] softirqs last disabled at (61631): [<c00273a0>] irq_exit+0xd0/0x114 [ 41.716206] Preemption disabled at:[< (null)>] (null) [ 41.721500] [ 41.722985] CPU: 3 PID: 30 Comm: kworker/u8:1 Tainted: G W 3.18.0-rc5-next-20141121 #883 [ 41.732111] Workqueue: kmmcd mmc_rescan [ 41.735945] [<c0014d2c>] (unwind_backtrace) from [<c0011c80>] (show_stack+0x10/0x14) [ 41.743661] [<c0011c80>] (show_stack) from [<c0489d14>] (dump_stack+0x70/0xbc) [ 41.750867] [<c0489d14>] (dump_stack) from [<c0228b74>] (gpiod_get_raw_value_cansleep+0x18/0x30) [ 41.759628] [<c0228b74>] (gpiod_get_raw_value_cansleep) from [<c03646e8>] (mmc_gpio_get_cd+0x38/0x58) [ 41.768821] [<c03646e8>] (mmc_gpio_get_cd) from [<c036d378>] (sdhci_request+0x50/0x1a4) [ 41.776808] [<c036d378>] (sdhci_request) from [<c0357934>] (mmc_start_request+0x138/0x268) [ 41.785051] [<c0357934>] (mmc_start_request) from [<c0357cc8>] (mmc_wait_for_req+0x58/0x1a0) [ 41.793469] [<c0357cc8>] (mmc_wait_for_req) from [<c0357e68>] (mmc_wait_for_cmd+0x58/0x78) [ 41.801714] [<c0357e68>] (mmc_wait_for_cmd) from [<c0361c00>] (mmc_io_rw_direct_host+0x98/0x124) [ 41.810480] [<c0361c00>] (mmc_io_rw_direct_host) from [<c03620f8>] (sdio_reset+0x2c/0x64) [ 41.818641] [<c03620f8>] (sdio_reset) from [<c035a3d8>] (mmc_rescan+0x254/0x2e4) [ 41.826028] [<c035a3d8>] (mmc_rescan) from [<c003a0e0>] (process_one_work+0x180/0x3f4) [ 41.833920] [<c003a0e0>] (process_one_work) from [<c003a3bc>] (worker_thread+0x34/0x4b0) [ 41.841991] [<c003a3bc>] (worker_thread) from [<c003fed8>] (kthread+0xe4/0x104) [ 41.849285] [<c003fed8>] (kthread) from [<c000f268>] (ret_from_fork+0x14/0x2c) [ 42.038276] mmc0: new high speed SDHC card at address 1234 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 94144a465dd0 ("mmc: sdhci: add get_cd() implementation") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mmc: sdhci-pci-o2micro: Fix Dell E5440 issuePeter Guo
commit 6380ea099cdd46d7377b6fbec0291cf2aa387bad upstream. Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue. Fixes: 01acf6917aed (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts) Signed-off-by: Peter Guo <peter.guo@bayhubtech.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mmc: block: add newline to sysfs display of force_roBaruch Siach
commit 0031a98a85e9fca282624bfc887f9531b2768396 upstream. Make force_ro consistent with other sysfs entries. Fixes: 371a689f64b0d ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mmc: omap_hsmmc: Fix UHS card with DDR50 supportUlf Hansson
commit 903101a83949d6fc77c092cef07e9c1e10c07e46 upstream. The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC, switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode. Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode. Fixes: 5438ad95a57c (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC) Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mmc: dw_mmc: avoid write to CDTHRCTL on older versionsJames Hogan
commit 66dfd10173159cafa9cb0d39936b8daeaab8e3e0 upstream. Commit f1d2736c8156 (mmc: dw_mmc: control card read threshold) added dw_mci_ctrl_rd_thld() with an unconditional write to the CDTHRCTL register at offset 0x100. However before version 240a, the FIFO region started at 0x100, so the write messes with the FIFO and completely breaks the driver. If the version id < 240A, return early from dw_mci_ctl_rd_thld() so as not to hit this problem. Fixes: f1d2736c8156 (mmc: dw_mmc: control card read threshold) Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05mmc: core: fix card detection regressionKristina Martsenko
Since commit 89168b489915 ("mmc: core: restore detect line inversion semantics"), the SD card on i.MX28 (and possibly other) devices isn't detected and booting stops at: [ 4.120617] Waiting for root device /dev/mmcblk0p3... This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly when the host controller doesn't use a GPIO for card detection (but instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will return before assigning to the gpio_invert variable, leaving the variable uninitialized. The variable then gets used to set the flag. This patch fixes the issue by making sure gpio_invert is set to false when a GPIO isn't used. After this patch, i.MX28 boots fine. The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly for the exact same reason (it uses the same uninitialized variable), so this patch fixes that too. Fixes: 89168b489915 ("mmc: core: restore detect line inversion semantics") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-18Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer driver update from Jens Axboe: "This is the block driver pull request for 3.18. Not a lot in there this round, and nothing earth shattering. - A round of drbd fixes from the linbit team, and an improvement in asender performance. - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and hd from Michael Opdenacker. - Disable entropy collection from flash devices by default, from Mike Snitzer. - A small collection of xen blkfront/back fixes from Roger Pau Monné and Vitaly Kuznetsov" * 'for-3.18/drivers' of git://git.kernel.dk/linux-block: block: disable entropy contributions for nonrot devices xen, blkfront: factor out flush-related checks from do_blkif_request() xen-blkback: fix leak on grant map error path xen/blkback: unmap all persistent grants when frontend gets disconnected rsxx: Remove deprecated IRQF_DISABLED block: hd: remove deprecated IRQF_DISABLED drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks drbd: compute the end before rb_insert_augmented() drbd: Add missing newline in resync progress display in /proc/drbd drbd: reduce lock contention in drbd_worker drbd: Improve asender performance drbd: Get rid of the WORK_PENDING macro drbd: Get rid of the __no_warn and __cond_lock macros drbd: Avoid inconsistent locking warning drbd: Remove superfluous newline from "resync_extents" debugfs entry. drbd: Use consistent names for all the bi_end_io callbacks drbd: Use better variable names
2014-10-11Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
2014-10-06mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequencyAdrian Hunter
Braswell eMMC host controller specifies an incorrect timeout clock frequncy in the capabilities registers. The correct value is 1 MHz. A similar fix was done for sdhci-pci, however in the sdhci-acpi case the HID/UID is not unique so the capabilities register values are matched also. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-06mmc: sdhci-acpi: Pass HID and UID to probe_slotAdrian Hunter
Pass HID and UID to probe_slot so extra setup can be done for specific ids. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-06mmc: sdhci-acpi: Get UID directly from acpi_deviceAdrian Hunter
UID was made available on acpi_device since commit ccf78040265b ("ACPI: Add _UID support for ACPI devices.") Use it from there instead of reprocessing the ACPI object info. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-04block: disable entropy contributions for nonrot devicesMike Snitzer
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set QUEUE_FLAG_NONROT. Historically, all block devices have automatically made entropy contributions. But as previously stated in commit e2e1a148 ("block: add sysfs knob for turning off disk entropy contributions"): - On SSD disks, the completion times aren't as random as they are for rotational drives. So it's questionable whether they should contribute to the random pool in the first place. - Calling add_disk_randomness() has a lot of overhead. There are more reliable sources for randomness than non-rotational block devices. From a security perspective it is better to err on the side of caution than to allow entropy contributions from unreliable "random" sources. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-03mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconstBehan Webster
The __initconst is in the wrong place, and when moved to the correct place it uncovers an error where the variable is used by non-init data structures. Instead merely make them const and put the const in the right spot. Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequencyAdrian Hunter
Braswell eMMC host controller specifies an incorrect timeout clock frequncy in the capabilities registers. The correct value is 1 MHz. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci: Let a driver override timeout clock frequencyAdrian Hunter
Let a driver override the timeout clock frequency by populating it before calling sdhci_add_host(). Note the value will otherwise be zero because sdhci_host is zeroed when allocated. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci-pci: Add Bay Trail and Braswell SD card detectAdrian Hunter
Add support for card detect for Bay Trail and Braswell SD Card host controllers in PCI mode. This uses the gpio descriptor API which can find gpio descriptors, for example, on an ACPI comapnion device. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllersAdrian Hunter
Add quirk SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci-acpi: Add a HID and UID for a SD Card host controllerAdrian Hunter
Add a HID (INT33BB) and UID (3) for a SD Card host controller. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllersAdrian Hunter
Add quirk SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-03mmc: sdhci: Add quirk for always getting TC with stop cmdAdrian Hunter
Add a quirk for a host controller that always sets a Transfer Complete interrupt status for the stop command even when a busy response is not indicated. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-02mmc: core: restore detect line inversion semanticsLinus Walleij
commit 98e90de99a0c43bd434da814c882c4332441871e "mmc: host: switch OF parser to use gpio descriptors" switched the semantic behaviour of card detect and read only flags such that the inversion capability flag would only be set if inversion was explicitly specified in the device tree, in the hopes that no-one was using double inversion. It turns out that the XOR:ing between the explicit inversion was indeed in use, so we need to restore the old semantics where both ways of inversion are checked and the end result XOR:ed. Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-30PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.hUlf Hansson
The commit 46420dd73b80 (PM / Domains: Add APIs to attach/detach a PM domain for a device) started using errno values in pm.h header file. It also failed to include the header for these, thus it caused compiler errors. Instead of including the errno header to pm.h, let's move the functions to pm_domain.h, since it's a better match. Fixes: 46420dd73b80 (PM / Domains: Add APIs to attach/detach a PM domain for a device) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-29mmc: Fix incorrect warning when setting 0 Hz via debugfsAdrian Hunter
It is possible to turn off the card clock by setting the frequency to zero via debugfs e.g. echo 0 > /sys/kernel/debug/mmc0/clock However that produces an incorrect warning that is designed to warn if the frequency is below the minimum operating frequency. So correct the warning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-29mmc: Fix use of wrong device in mmc_gpiod_free_cd()Adrian Hunter
mmc_gpiod_free_cd() is paired with mmc_gpiod_request_cd() and both must reference the same device which is the actual host controller device not the mmc_host class device. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-29mmc: atmel-mci: fix mismatched section on atmci_cleanup_slotArnd Bergmann
As of 528bc7808f4e ("mmc: atmel-mci: Release mmc resources on failure in probe"), the atmci_probe() function calls atmci_cleanup_slot in the failure path. This causes a new warning whenever the driver is built: WARNING: drivers/mmc/host/built-in.o(.init.text+0xa04): Section mismatch in reference from the function atmci_probe() to the function .exit.text:atmci_cleanup_slot() The function __init atmci_probe() references a function __exit atmci_cleanup_slot(). Gcc correctly warns about this function getting dropped in the link stage for the built-in case, which would cause undefined behavior when this error path is hit. The solution is to simply drop the __exit annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 528bc7808f4e ("mmc: atmel-mci: Release mmc resources on failure in probe") Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: rtsx_pci: Set power related cap2 macrosRoger Tseng
Set MMC_CAP2_NO_PRESCAN_POWERUP and MMC_CAP2_FULL_PWR_CYCLE for rtsx_pci_sdmmc and rtsx_usb_sdmmc to reflect properties of Realtek card reader hosts. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: core: Add new power_mode MMC_POWER_UNDEFINEDRoger Tseng
Add MMC_POWER_UNDEFINED for power_mode in struct mmc_ios and use it as the initial value of host->ios.power_mode. For hosts with MMC_CAP2_NO_PRESCAN_POWERUP, this makes the later mmc_power_off() do real power-off things instead of NOP, and further prevents state messed up in cards that was already initialized (eg. by BIOS of UEFI driver). Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: sdhci: execute tuning when device is not busyYi Sun
We find tuning timeout because of the secure erase operation lasts too long, so don't do tuning when device is busy. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: atmel-mci: Release mmc resources on failure in probePramod Gurav
This change takes care of releasing mmc resources on error cases in probe function which was missing. Also release timer in remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: atmel-mci: Switch to using managed resource in probePramod Gurav
This change uses managed resource APIs to allocate resources such as, clk, gpio, io in order to simplify the driver unload or failure cases. Hence does away with release statements of the same resources in error labels and remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: Convert pr_warning to pr_warnJoe Perches
Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Coalesce formats o Realign arguments o Remove extra spaces when coalescing formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-23mmc: Consolidate emmc tuning blocksStephen Boyd
The same tuning block exists in the dw_mmc h.c and sdhci-msm.c files. Move these into mmc.c so that they can be shared across drivers. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-23mmc: sdhci-msm: Make tuning block table endian agnosticStephen Boyd
If we're tuning on a big-endian CPU we'll never determine we properly tuned the device because we compare the data we received from the controller with a table that assumes the CPU is little-endian. Change the table to be an array of bytes instead of 32-bit words so we can use memcmp() without needing to byte-swap every word depending on the endianess of the CPU. Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Reviewed-by: Georgi Djakov <gdjakov@mm-sol.com> Fixes: 415b5a75da43 "mmc: sdhci-msm: Add platform_execute_tuning implementation" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-23mmc: don't request CD IRQ until mmc_start_host()Stephen Warren
As soon as the CD IRQ is requested, it can trigger, since it's an externally controlled event. If it does, delayed_work host->detect will be scheduled. Many host controller probe()s are roughly structured as: *_probe() { host = sdhci_pltfm_init(); mmc_of_parse(host->mmc); rc = sdhci_add_host(host); if (rc) { sdhci_pltfm_free(); return rc; } In 3.17, CD IRQs can are enabled quite early via *_probe() -> mmc_of_parse() -> mmc_gpio_request_cd() -> mmc_gpiod_request_cd_irq(). Note that in linux-next, mmc_of_parse() calls mmc_gpio*d*_request_cd() rather than mmc_gpio_request_cd(), and mmc_gpio*d*_request_cd() doesn't call mmc_gpiod_request_cd_irq(). However, this issue still exists if mmc_gpio_request_cd() is called directly before mmc_start_host(). sdhci_add_host() may fail part way through (e.g. due to deferred probe for a vmmc regulator), and sdhci_pltfm_free() does nothing to unrequest the CD IRQ nor cancel the delayed_work. sdhci_pltfm_free() is coded to assume that if sdhci_add_host() failed, then the delayed_work cannot (or should not) have been triggered. This can lead to the following with CONFIG_DEBUG_OBJECTS_* enabled, when kfree(host) is eventually called inside sdhci_pltfm_free(): WARNING: CPU: 2 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x8c/0xb4() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x18 The object being complained about is host->detect. There's no need to request the CD IRQ so early; mmc_start_host() already requests it. For most SDHCI hosts at least, the typical call path that does this is: *_probe() -> sdhci_add_host() -> mmc_add_host() -> mmc_start_host(). Therefore, remove the call to mmc_gpiod_request_cd_irq() from mmc_gpio_request_cd(). This also matches mmc_gpio*d*_request_cd(), which already doesn't call mmc_gpiod_request_cd_irq(). However, some host controller drivers call mmc_gpio_request_cd() after mmc_start_host() has already been called, and assume that this will also call mmc_gpiod_request_cd_irq(). Update those drivers to explicitly call mmc_gpiod_request_cd_irq() themselves. Ideally, these drivers should be modified to move their call to mmc_gpio_request_cd() before their call to mmc_add_host(). However that's too large a change for stable. This solves the problem (eliminates the kernel error message above), since it guarantees that the IRQ can't trigger before mmc_start_host() is called. The critical point here is that once sdhci_add_host() calls mmc_add_host() -> mmc_start_host(), sdhci_add_host() is coded not to fail. In other words, if there's a chance that mmc_start_host() may have been called, and CD IRQs triggered, and the delayed_work scheduled, sdhci_add_host() won't fail, and so cleanup is no longer via sdhci_pltfm_free() (which doesn't free the IRQ or cancel the work queue) but instead must be via sdhci_remove_host(), which calls mmc_remove_host() -> mmc_stop_host(), which does free the IRQ and cancel the work queue. CC: Russell King <linux@arm.linux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-22mmc: sdio: Convert to dev_pm_domain_attach|detach()Ulf Hansson
Previously only the ACPI PM domain was supported by the sdio bus. Let's convert to the common attach/detach functions for PM domains, which currently means we are extending the support to include the generic PM domain as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-19mmc: tmio: prevent endless loop in tmio_mmc_set_clock()Sergei Shtylyov
I spent a couple of days with the driver just hanging due to me forgetting to specify the external crystal frequency, so that clk_get_rate() returned 0 and thus the loop in tmio_mmc_set_clock() never ended. I don't think that's an acceptable behavior, so I suggest that the minimum frequency is checked for 0 in tmio_mmc_host_probe(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Ian Molton <ian.molton@codethink.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: tmio: enable odd number size accessKuninori Morimoto
Current tmio is using sd_ctrl_read16/write16_rep() for data transfer. It works if transfer size was even number, but, last 1 byte will be ignored if transfer size was odd number. This patch adds new tmio_mmc_transfer_data() and solve this issue. Tested-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: block: change stop errors to infoJohan Rudholm
Stop command errors are not fatal to the transfer since we make sure that the card returns to the transfer state and check the card status. Change an unnecessary error to an info. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: dw_mmc: Remove unused function for !CONFIG_OFTobias Klauser
dw_mci_of_find_slot_node() is only used in dw_mci_of_get_slot_quirks() if CONFIG_OF is defined, thus there is no need to have a !CONFIG_OF version of it. Fixes the following compile warning with !CONFIG_OF: CC [M] drivers/mmc/host/dw_mmc.o drivers/mmc/host/dw_mmc.c:2223:28: warning: ‘dw_mci_of_find_slot_node’ defined but not used [-Wunused-function] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: Checks EXT_CSD_PARTITION_SETTING_COMPLETED before partitions computationGrégory Soutadé
Checks EXT_CSD_PARTITION_SETTING_COMPLETED bit before computing enhanced user area offset and size, and adding mmc general purpose partitions. The two needs EXT_CSD_PARTITION_SETTING_COMPLETED bit be set to be valid (as described in JEDEC standard). Warn user in case of misconfiguration. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: Replace "enhanced_area_en" attribute by "partition_setting_completed"Grégory Soutadé
Replace ext_csd "enhanced_area_en" attribute by "partition_setting_completed". It was used whether or not enhanced user area is defined and without checks of EXT_CSD_PARTITION_SETTING_COMPLETED bit. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-19mmc: Move code that manages user area and gp partitions into functionsGrégory Soutadé
Move code that manages user area and general purpose partitions into functions. Signed-off-by: Grégory Soutadé <gsoutade@neotion.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-10mmc: sdhci-pxav3: fix error handling of sdhci_add_hostXiang Wang
Commit 0dcaa2499b7d111bd70da5b0976c34210c850fb3 improved error handling of sdhci_add_host. However, "err_of_parse" and "err_cd_req" should be placed after "pm_runtime_disable(&pdev->dev)". Signed-off-by: Xiang Wang <wangx@marvell.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-10mmc: mmci: rename sdio flag in vendor data to st_sdioSrinivas Kandagatla
This patch renames sdio flag in vendor data to st_sdio, as this flag is only used to enable ST specific sdio setup. This will also ensure that the ST specfic setup is not done on other vendor like Qualcomm. Originally the issue was detected while testing WLAN ath6kl on IFC6410 board with APQ8064 SOC. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-10mmc: mmci: Add sdio enable mask in variant dataSrinivas Kandagatla
This patch adds sdio enable mask in variant data, SOCs like ST have special bits in datactrl register to enable sdio. Unconditionally setting this bit in this driver breaks other SOCs like Qualcomm which maps this bits to something else, so making this enable bit to come from variant data solves the issue. Originally the issue is detected while testing WLAN ath6kl on Qualcomm APQ8064. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: mmci: augment driver to handle gpio descriptorsLinus Walleij
Currently the MMCI driver will only handle GPIO descriptors implicitly through the device tree probe glue in mmc_of_init(), but devices instatiated other ways such as through board files and passing descriptors using the GPIO descriptor table will not be able to exploit descriptors. Augment the driver to look for a GPIO descriptor if device tree is not used for the device, and if that doesn't work, fall back to platform data GPIO assignment using the old API. The end goal is to get rid of the platform data integer GPIO assingments from the kernel. This enable the MMCI-embedding platforms to be converted to GPIO descritor tables. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: host: switch OF parser to use gpio descriptorsLinus Walleij
This switches the central MMC OF parser to use gpio descriptors instead of grabbing GPIOs explicitly from the device tree. This strips out an unecessary use of the integer-based GPIO API that we want to get rid of, cuts down on code as the gpio descriptor code will handle active low flags. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: slot-gpio: add gpiod variant to get wp GPIOLinus Walleij
This makes it possible to get the write protect (read only) GPIO line from a GPIO descriptor. Written to exactly mirror the card detect function. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: slot-gpio: switch to use flags when getting GPIOLinus Walleij
When the slot GPIO driver gets the GPIO to be used for card detect, it is now possible to specify a flag to have the line set up as input. Get rid of the explicit setup call for input and use the flag. The extra argument works as there are transition varargs macros in place in the <linux/gpio/consumer.h> header, in the future we will make the flags argument compulsory. Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 23:29:35 +0000