summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-16Merge commit 'dmaengine-3.13-v2' of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14dmaengine: remove DMA unmap flagsBartlomiej Zolnierkiewicz
Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD changes from Brian Norris: - Unify some compile-time differences so that we have fewer uses of #ifdef CONFIG_OF in atmel_nand - Other general cleanups (removing unused functions, options, variables, fields; use correct interfaces) - Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via ONFI - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.) - Improve differentiation between SLC and MLC NAND -- this clarifies an ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO ioctl), where the MTD_MLCNANDFLASH type was present but inconsistently used - Extend GPMI NAND to support multi-chip-select NAND for some platforms - Many improvements to the OMAP2/3 NAND driver, including an expanded DT binding to bring us closer to mainline support for some OMAP systems - Fix a deadlock in the error path of the Atmel NAND driver probe - Correct the error codes from MTD mmap() to conform to POSIX and the Linux Programmer's Manual. This is an acknowledged change in the MTD ABI, but I can't imagine somebody relying on the non-standard -ENOSYS error code specifically. Am I just being unimaginative? :) - Fix a few important GPMI NAND bugs (one regression from 3.12 and one long-standing race condition) - More? Read the log! * tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits) mtd: gpmi: fix the NULL pointer mtd: gpmi: fix kernel BUG due to racing DMA operations mtd: mtdchar: return expected errors on mmap() call mtd: gpmi: only scan two chips for imx6 mtd: gpmi: Use devm_kzalloc() mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected mtd: nand: use a local variable to simplify the nand_scan_tail mtd: nand: remove deprecated IRQF_DISABLED mtd: dataflash: Say if we find a device we don't support mtd: nand: omap: fix error return code in omap_nand_probe() mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES mtd: m25p80: fixup device removal failure path mtd: mxc_nand: Include linux/of.h header mtd: remove duplicated include from mtdcore.c mtd: m25p80: add support for Macronix mx25l3255e mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig mtd: nand: omap: updated devm_xx for all resource allocation and free calls mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c mtd: nand: omap: clean-up ecc layout for BCH ecc schemes mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe ...
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-11-13Merge tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull UBI changes from Artem Bityutskiy: "A bunch of fixes for the fastmap feature, which is still new and rather experimental. It looks like it starts getting more users. No significant changes for the "classical" non-fastmap UBI" * tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi: UBI: Add some asserts to ubi_attach_fastmap() UBI: Fix memory leak in ubi_attach_fastmap() error path UBI: simplify image sequence test UBI: fastmap: fix backward compatibility with image_seq UBI: Call scan_all() with correct offset in error case UBI: Fix error path in scan_pool() UBI: fix refill_wl_user_pool()
2013-11-12mtd: gpmi: fix the NULL pointerHuang Shijie
The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 #89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-11mtd: gpmi: fix kernel BUG due to racing DMA operationsHuang Shijie
[1] The gpmi uses the nand_command_lp to issue the commands to NAND chips. The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0) from the NAND, we may send two DMA operations back-to-back. If we do not serialize the two DMA operations, we will meet a bug when 1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG, and CONFIG_DEBUG_SG. 1.2) Use the following commands in an UART console and a SSH console: cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done The kernel log shows below: ----------------------------------------------------------------- kernel BUG at lib/scatterlist.c:28! Unable to handle kernel NULL pointer dereference at virtual address 00000000 ......................... [<80044a0c>] (__bug+0x18/0x24) from [<80249b74>] (sg_next+0x48/0x4c) [<80249b74>] (sg_next+0x48/0x4c) from [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<8004af58>] (dma_unmap_sg+0x14/0x6c) [<8004af58>] (dma_unmap_sg+0x14/0x6c) from [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<8007d444>] (tasklet_action+0x114/0x164) ----------------------------------------------------------------- 1.3) Assume the two DMA operations is X (first) and Y (second). The root cause of the bug: Assume process P issues DMA X, and sleep on the completion @this->dma_done. X's tasklet callback is dma_irq_callback. It firstly wake up the process sleeping on the completion @this->dma_done, and then trid to unmap the scatterlist S. The waked process P will issue Y in another ARM core. Y initializes S->sg_magic to zero with sg_init_one(), while dma_irq_callback is unmapping S at the same time. See the diagram: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init | scatterlist S) | [2] This patch serialize both the X and Y in the following way: Unmap the DMA scatterlist S firstly, and wake up the process at the end of the DMA callback, in such a way, Y will be executed after X. After this patch: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | | <-- (Y calls sg_init_one() to init | scatterlist S) | Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11mtd: mtdchar: return expected errors on mmap() callVladimir Zapolskiy
According both to POSIX.1-2008 and Linux Programmer's Manual mmap() syscall shouldn't return undocumented ENOSYS, this change replaces the errno with more appropriate ENODEV and EACCESS. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11mtd: gpmi: only scan two chips for imx6Huang Shijie
We cannot scan two chips for imx23 and imx28: imx23: the Ready-Busy1 line is not connected for some board. imx28: we do not set the pinctrl for Ready-Busy1 So we only scan two chips for imx6. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11powerpc: add missing explicit OF includes for ppcRob Herring
Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit includes of of_*.h headers by powerpc's prom.h. Some components were missed in initial clean-up patch, so add the necessary includes to fix powerpc builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org
2013-11-07mtd: gpmi: Use devm_kzalloc()Fabio Estevam
Using devm_kzalloc() can make the code simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07mtd: atmel_nand: fix bug driver will in a dead lock if no nand detectedJosh Wu
In the atmel driver probe function, the code shows like following: atmel_nand_probe(...) { ... err_nand_ioremap: platform_driver_unregister(&atmel_nand_nfc_driver); return res; } If no nand flash detected, the driver probe function will goto err_nand_ioremap label. Then platform_driver_unregister() will be called. It will get the lock of atmel_nand device since it is parent of nfc_device. The problem is the lock is already hold by atmel_nand_probe itself. So system will be in a dead lock. This patch just simply removed to platform_driver_unregister() call. When atmel_nand driver is quit the platform_driver_unregister() will be called in atmel_nand_remove(). [Brian: the NAND platform probe really has no business registering/unregistering another driver; this fixes the deadlock, but we should follow up the likely racy behavior here with a better architecture] Signed-off-by: Josh Wu <josh.wu@atmel.com> Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring
2013-11-07mtd: nand: use a local variable to simplify the nand_scan_tailHuang Shijie
There are too many "chip->ecc" in the nand_scan_tail() which makes the eyes sore. This patch uses a local variable "ecc" to replace the "chip->ecc" to make the code more graceful. Do the code change with "s/chip->ecc\./ecc->/g" in the nand_scan_tail, and also change some lines by hand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07mtd: nand: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07mtd: dataflash: Say if we find a device we don't supportMark Brown
Ensure that the error message if we identify a flash we don't know how to talk to is displayed on the console in order to aid diagnostics. While we're at convert the message to use dev_info() rather than our hand rolled version of it for consistency. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: fix error return code in omap_nand_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, to more closely match the rest of this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand_bbt: kill NAND_BBT_SCANALLPAGESBrian Norris
Now that the last user of NAND_BBT_SCANALLPAGES has been removed, let's kill this peculiar BBT feature flag. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-11-06mtd: m25p80: fixup device removal failure pathBrian Norris
Device removal should fail if MTD unregistration fails. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2013-11-06mtd: mxc_nand: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: remove duplicated include from mtdcore.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: m25p80: add support for Macronix mx25l3255eBrian Norris
A new 32Mbit SPI NOR flash from Macronix. Nothing special. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2013-11-06mtd: nand: omap: remove selection of BCH ecc-scheme via KConfigPekon Gupta
With OMAP NAND driver updates, selection of ecc-scheme: *DT enabled kernel* depends on ti,nand-ecc-opt and ti,elm-id DT bindings. *Non DT enabled kernel* depends on elm_dev and ecc-scheme passed along with platform-data from board file. So, selection of ecc-scheme (BCH8 or BCH4) from KConfig can be removed Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: updated devm_xx for all resource allocation and free callsPekon Gupta
"Managed Device Resource" or devm_xx calls takes care of automatic freeing of the resource in case of: - failure during driver probe - failure during resource allocation - detaching or unloading of driver module (rmmod) Reference: Documentation/driver-model/devres.txt Though OMAP NAND driver handles freeing of resource allocation in most of the cases, but using devm_xx provides more clean and effortless approach to handle all such cases. - simplifies label for exiting probe during error s/out_release_mem_region/return_error Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead ↵Pekon Gupta
of lib/bch.c generic frame-work in mtd/nand/nand_bch.c is a wrapper above lib/bch.h which encapsulates all control information specific to BCH ecc algorithm in software. Thus this patch: (1) replace omap specific implementations with equivalent wrapper in nand_bch.c so that generic code from nand_bch.c is re-used. like; omap3_correct_data_bch() -> nand_bch_correct_data() omap3_free_bch() -> nand_bch_free() (2) replace direct calls to lib/bch.c with wrapper functions defined in nand_bch.c init_bch() -> nand_bch_init() Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: clean-up ecc layout for BCH ecc schemesPekon Gupta
In current implementation omap3_init_bch_tail() is a common function to define ecc layout for different BCHx ecc schemes.This patch: (1) removes omap3_init_bch_tail() and defines ecc layout for individual ecc-schemes along with populating their nand_chip->ecc data in omap_nand_probe(). This improves the readability and scalability of code for add new ecc schemes in future. (2) removes 'struct nand_bbt_descr bb_descrip_flashbased' because default nand_bbt_descr in nand_bbt.c matches the same (.len=1 for x8 devices). (3) add the check to see if NAND device has enough OOB/Spare bytes to store ECC signature of whole page, as defined by ecc-scheme. Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in ↵Pekon Gupta
device_probe current implementation in omap3_init_bch() has some redundant code like: (1) omap3_init_bch() re-probes the DT-binding to detect presence of ELM h/w engine on SoC. And based on that it selects implemetation of ecc-scheme. However, this is already done as part of GPMC DT parsing. (2) As omap3_init_bch() serves as common function for configuring all types of BCHx ecc-schemes, so there are multiple levels of redudant if..then..else checks while populating nand_chip->ecc. This patch make following changes to OMAP NAND driver: (1) removes omap3_init_bch(): each ecc-scheme is individually configured in omap_nand_probe() there by removing redundant if..then..else checks. (2) adds is_elm_present(): re-probing of ELM device via DT is not required as it's done in GPMC driver probe. Thus is_elm_present() just initializes ELM driver with NAND probe data, when ecc-scheme with h/w based error-detection is used. (3) separates out configuration of different flavours of "BCH4" and "BCH8" ecc-schemes as given in below table (4) conditionally compiles callbacks implementations of ecc.hwctl(), ecc.calculate(), ecc.correct() to avoid warning of un-used functions. +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)| | (needs CONFIG_MTD_NAND_ECC_BCH) | | | | | | | |OMAP_ECC_BCH4_CODE_HW |H/W (GPMC) |H/W (ELM) | | (needs CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)| | (needs CONFIG_MTD_NAND_ECC_BCH) | | | | | | | |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | | (needs CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id) | | | +---------------------------------------+---------------+---------------+ - 'CONFIG_MTD_NAND_ECC_BCH' is generic KConfig required to build lib/bch.c which is required for ECC error detection done in software. (mainly used for legacy platforms which do not have on-chip ELM engine) - 'CONFIG_MTD_NAND_OMAP_BCH' is OMAP specific Kconfig to detemine presence on ELM h/w engine on SoC. Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: use DT specified bus-width only for scanning NAND devicePekon Gupta
This patch: - calls nand_scan_ident() using bus-width as passed by DT - removes double calls to nand_scan_ident(), in case first call fails then omap_nand_probe just returns error. Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: cleanup: replace local references with generic framework namesPekon Gupta
This patch updates following in omap_nand_probe() and omap_nand_remove() - replaces "info->nand" with "nand_chip" (struct nand_chip *nand_chip) - replaces "info->mtd" with "mtd" (struct mtd_info *mtd) - white-space and formatting cleanup Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemesPekon Gupta
OMAP NAND driver currently supports multiple flavours of 1-bit Hamming ecc-scheme, like: - OMAP_ECC_HAMMING_CODE_DEFAULT 1-bit hamming ecc code using software library - OMAP_ECC_HAMMING_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine - OMAP_ECC_HAMMING_CODE_HW_ROMCODE 1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible to ROM code. This patch combines above multiple ecc-schemes into single implementation: - OMAP_ECC_HAM1_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible ecc-layout. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: m25p80: remove 'disabled' device checkBrian Norris
It seems like the following commit was never necessary commit 5f949137952020214cd167093dd7be448f21c079 Author: Shaohui Xie <Shaohui.Xie@freescale.com> Date: Fri Oct 14 15:49:00 2011 +0800 mtd: m25p80: don't probe device which has status of 'disabled' because it duplicates the code in of_platform_device_create_pdata() which ensures that 'disabled' nodes are never instantiated. Also, drop the __maybe_unused. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: <devicetree@vger.kernel.org>
2013-11-06mtd: m25p80: remove M25PXX_USE_FAST_READ KconfigBrian Norris
Remove the compile-time option for FAST_READ, since we have run-time support for detecting it. This refactors the logic for enabling fast-read, such that for DT-enabled devices, we honor the "m25p,fast-read" property but for non-DT devices, we default to using FAST_READ whenever the flash device supports it. Normal READ and FAST_READ differ only in the following: * FAST_READ supports SPI higher clock frequencies [1] * number of dummy cycles; FAST_READ requires 8 dummy cycles (whereas READ requires 0) to allow the flash sufficient setup time, even when running at higher clock speeds Thus, for flash chips which support FAST_READ, there is otherwise no limiting reason why we cannot use the FAST_READ opcode instead of READ. It simply allows the SPI controller to run at higher clock rates. So theoretically, nobody should be needing the compile-time option anyway. [1] I have a Spansion S25FL128S datasheet which says: "The maximum operating clock frequency for the READ command is 50 MHz." And: "The maximum operating clock frequency for FAST READ command is 133 MHz." Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: m25p80: re-align ID entriesBrian Norris
No change in the table data. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Sourav Poddar <sourav.poddar@ti.com>
2013-11-06mtd: m25p80: remove obsolete FIXMEBrian Norris
The FIXME and NOTE have already been fixed (we have FAST_READ support). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Marek Vasut <marex@denx.de>
2013-11-06mtd: m25p80: fix allocation sizeBrian Norris
This patch fixes two memory errors: 1. During a probe failure (in mtd_device_parse_register?) the command buffer would not be freed. 2. The command buffer's size is determined based on the 'fast_read' boolean, but the assignment of fast_read is made after this allocation. Thus, the buffer may be allocated "too small". To fix the first, just switch to the devres version of kzalloc. To fix the second, increase MAX_CMD_SIZE unconditionally. It's not worth saving a byte to fiddle around with the conditions here. This problem was reported by Yuhang Wang a while back. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reported-by: Yuhang Wang <wangyuhang2014@gmail.com> Reviewed-by: Sourav Poddar <sourav.poddar@ti.com> Cc: <stable@vger.kernel.org>
2013-11-06mtd: gpmi: imx6: fix the wrong method for checking ready/busyHuang Shijie
In the imx6, all the ready/busy pins are binding togeter. So we should always check the ready/busy pin of the chip 0. In the other word, when the CS1 is enabled, we should also check the ready/busy of chip 0; if we check the ready/busy of chip 1, we will get the wrong result. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: gpmi: scan two nand chipsHuang Shijie
Some nand chip has two DIEs in a single chip, such as Micron MT29F32G08QAA. Each die has its own chip select pin, so this chip acts as two nand chips. If we only scan one chip, we may find that we only get 2G for this chip, but in actually, this chip's size is 4G. So scan two chips by default. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: gpmi: use DMA channel 0 for all the nand chipsHuang Shijie
We only have one DMA channel : the channel 0. Use DMA channel 0 to access all the nand chips. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: gpmi: decouple the chip select from the DMA channelHuang Shijie
Decouple the chip select from the DMA channel, we use the DMA channel 0 to accecc all the nand devices. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06driver/mtd/ifc: Read Status while programming NAND flashPrabhakar Kushwaha
as per controller description, "While programming a NAND flash, status read should never skipped. Because it may happen that a new command is issued to the NAND Flash, even when the device has not yet finished processing the previous request. This may result in unpredictable behaviour." IFC controller never polls for R/B signal after command send. It just return control to software. This behaviour may not occur with NAND flash access. because new commands are sent after polling R/B signal. But it may happen in scenario where GPCM-ASIC and NAND flash device are working simultaneously. Update the controller driver to take care of this requirement Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06driver/mtd/IFC: Add support of 8K page size NAND flashPrabhakar Kushwaha
Current IFC driver supports till 4K page size NAND flash. Add support of 8K Page size NAND flash - Add nand_ecclayout for 4 bit & 8 bit ecc - Defines constants - also fix ecc.strength for 8bit ecc of 8K page size NAND Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: Move major number definitions to major.hEzequiel Garcia
This patch moves the char and block major number definitions to major.h to be with the rest of the major numbers. While doing this, include major.h in the files that need it. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: detect "factory" partitionRafał Miłecki
A new type of partition with magic FCTY was found on Huawei E970: 46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290| Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: detect block aligned Squashfs partitionRafał Miłecki
Most of the bcm47xx devices use TRX format for storing kernel and some partition like Squashfs or JFFS2. This is pretty flexible solution, CFE (the bootloader) just writes (and later boots) TRX at some hardcoded place and paritions can vary in the size. However some devices don't use TRX format. Very recently we have discovered ZTE H218N that has kernel and rootfs partitions at some "random" places. This patch allows Linux find a rootfs partition after installing custom image with a CFE bootloader. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: handle malloc failuresHauke Mehrtens
Handle return NULL in malloc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxnflash: Use devm_kzallocSachin Kamat
devm_kzalloc is device managed and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>