summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-09-03net: gianfar: Add of_node_put() before goto statementSumera Priyadarsini
[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ] Every iteration of for_each_available_child_of_node() decrements reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in gianfar.c by inserting of_node_put() before the goto statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03Revert "ath10k: fix DMA related firmware crashes on multiple devices"Zhi Chen
[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03rtlwifi: rtl8192cu: Prevent leaking urbReto Schneider
[ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ] If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03bonding: fix a potential double-unregisterCong Wang
[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03bonding: show saner speed for broadcast modeJarod Wilson
[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03ipvlan: fix device featuresMahesh Bandewar
[ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ] Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21net: stmmac: dwmac1000: provide multicast filter fallbackJonathan McDowell
commit 592d751c1e174df5ff219946908b005eb48934b3 upstream. If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21net: ethernet: stmmac: Disable hardware multicast filterJonathan McDowell
commit df43dd526e6609769ae513a81443c7aa727c8ca3 upstream. The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI. Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drivers/net/wan/lapbether: Added needed_headroom and a skb->len checkXie He
[ Upstream commit c7ca03c216acb14466a713fedf1b9f2c24994ef2 ] 1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header. So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create. However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0. So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated. This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets. Call stack when panic: [ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20 put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0 dev:veth0 ... [ 168.399255] Call Trace: [ 168.399259] skb_push.cold+0x14/0x24 [ 168.399262] eth_header+0x2b/0xc0 [ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether] [ 168.399275] lapb_data_transmit+0x22/0x2c [lapb] [ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb] [ 168.399279] lapb_kick+0xe3/0x1c0 [lapb] [ 168.399281] lapb_data_request+0x76/0xc0 [lapb] [ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether] [ 168.399286] dev_hard_start_xmit+0x91/0x1f0 [ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100 [ 168.399291] __dev_queue_xmit+0x721/0x8e0 [ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110 [ 168.399297] dev_queue_xmit+0x10/0x20 [ 168.399298] packet_sendmsg+0xbf0/0x19b0 ...... Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21net: spider_net: Fix the size used in a 'dma_free_coherent()' callChristophe JAILLET
[ Upstream commit 36f28f7687a9ce665479cce5d64ce7afaa9e77ae ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'. Fixes: d4ed8f8d1fb7 ("Spidernet DMA coalescing") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21wl1251: fix always return 0 errorWang Hai
[ Upstream commit 20e6421344b5bc2f97b8e2db47b6994368417904 ] wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21mwifiex: Prevent memory corruption handling keysDan Carpenter
[ Upstream commit e18696786548244914f36ec3c46ac99c53df99c3 ] The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21iwlegacy: Check the return value of pcie_capability_read_*()Bolarinwa Olayemi Saheed
[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ] On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x). This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success. Check the return value of pcie_capability_read_dword() to ensure success. Suggested-by: Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21brcmfmac: To fix Bss Info flag definition BugPrasanna Kerekoppa
[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ] Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21vxlan: Ensure FDB dump is performed under RCUIdo Schimmel
[ Upstream commit b5141915b5aec3b29a63db869229e3741ebce258 ] The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21usb: hso: check for return value in hso_serial_common_create()Rustam Kovhaev
[ Upstream commit e911e99a0770f760377c263bc7bac1b1593c6147 ] in case of an error tty_register_device_attr() returns ERR_PTR(), add IS_ERR() check Reported-and-tested-by: syzbot+67b2bd0e34f952d0321e@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=67b2bd0e34f952d0321e Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21net: lan78xx: replace bogus endpoint lookupJohan Hovold
[ Upstream commit ea060b352654a8de1e070140d25fe1b7e4d50310 ] Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings. Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core. Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21Revert "vxlan: fix tos value before xmit"Hangbin Liu
[ Upstream commit a0dced17ad9dc08b1b25e0065b54c97a318e6e8b ] This reverts commit 71130f29979c7c7956b040673e6b9d5643003176. In commit 71130f29979c ("vxlan: fix tos value before xmit") we want to make sure the tos value are filtered by RT_TOS() based on RFC1349. 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | PRECEDENCE | TOS | MBZ | +-----+-----+-----+-----+-----+-----+-----+-----+ But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | DS FIELD, DSCP | ECN FIELD | +-----+-----+-----+-----+-----+-----+-----+-----+ So with IPTOS_TOS_MASK 0x1E RT_TOS(tos) ((tos)&IPTOS_TOS_MASK) the first 3 bits DSCP info will get lost. To take all the DSCP info in xmit, we should revert the patch and just push all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later. Fixes: 71130f29979c ("vxlan: fix tos value before xmit") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21igb: reinit_locked() should be called with rtnl_lockFrancesco Ruggeri
[ Upstream commit 024a8168b749db7a4aa40a5fbdfa04bf7e77c1c0 ] We observed two panics involving races with igb_reset_task. The first panic is caused by this race condition: kworker reboot -f igb_reset_task igb_reinit_locked igb_down napi_synchronize __igb_shutdown igb_clear_interrupt_scheme igb_free_q_vectors igb_free_q_vector adapter->q_vector[v_idx] = NULL; napi_disable Panics trying to access adapter->q_vector[v_idx].napi_state The second panic (a divide error) is caused by this race: kworker reboot -f tx packet igb_reset_task __igb_shutdown rtnl_lock() ... igb_clear_interrupt_scheme igb_free_q_vectors adapter->num_tx_queues = 0 ... rtnl_unlock() rtnl_lock() igb_reinit_locked igb_down igb_up netif_tx_start_all_queues dev_hard_start_xmit igb_xmit_frame igb_tx_queue_mapping Panics on r_idx % adapter->num_tx_queues This commit applies to igb_reset_task the same changes that were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver"), commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in reset subtask"). Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21xen-netfront: fix potential deadlock in xennet_remove()Andrea Righi
[ Upstream commit c2c633106453611be07821f53dff9e93a9d1c3f0 ] There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21net: ethernet: ravb: exit if re-initialization fails in tx timeoutYoshihiro Shimoda
[ Upstream commit 015c5d5e6aa3523c758a70eb87b291cece2dbbb4 ] According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work(). ravb e6800000.ethernet ethernet: failed to switch device to config mode This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit(). To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits. [1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/ Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21mlxsw: core: Increase scope of RCU read-side critical sectionIdo Schimmel
[ Upstream commit 7d8e8f3433dc8d1dc87c1aabe73a154978fb4c4d ] The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21net: lan78xx: fix transfer-buffer memory leakJohan Hovold
[ Upstream commit 63634aa679ba8b5e306ad0727120309ae6ba8a8e ] The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21net: lan78xx: add missing endpoint sanity checkJohan Hovold
[ Upstream commit 8d8e95fd6d69d774013f51e5f2ee10c6e6d1fc14 ] Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21ath9k: release allocated buffer if timed outNavid Emamdoost
[ Upstream commit 728c1e2a05e4b5fc52fab3421dce772a806612a2 ] In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21ath9k_htc: release allocated buffer if timed outNavid Emamdoost
[ Upstream commit 853acf7caf10b828102d92d05b5c101666a6142b ] In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service if time out happens, the allocated buffer needs to be released. Otherwise there will be memory leak. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe()Wei Yongjun
[ Upstream commit 297a6961ffb8ff4dc66c9fbf53b924bd1dda05d5 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31drivers/net/wan/x25_asy: Fix to make it workXie He
[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ] This driver is not working because of problems of its receiving code. This patch fixes it to make it work. When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers. The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure. Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Reviewed-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31ath9k: Fix regression with Atheros 9271Mark O'Donovan
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31ath9k: Fix general protection fault in ath9k_hif_usb_rx_cbQiujun Huang
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31net: smc91x: Fix possible memory leak in smc_drv_probe()Wang Hai
[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ] If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev) should be called to free the ndev created earlier. Otherwise, a memleak will occur. Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configurationSergey Organov
[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ] From Documentation/networking/timestamping.txt: A driver which supports hardware time stamping shall update the struct with the actual, possibly more permissive configuration. Do update the struct passed when we upscale the requested time stamping mode. Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31ax88172a: fix ax88172a_unbind() failuresGeorge Kennedy
[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ] If ax88172a_unbind() fails, make sure that the return code is less than zero so that cleanup is done properly and avoid UAF. Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers") Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31hippi: Fix a size used in a 'pci_free_consistent()' in an error handling pathChristophe JAILLET
[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ] The size used when calling 'pci_alloc_consistent()' and 'pci_free_consistent()' should match. Fix it and have it consistent with the corresponding call in 'rr_close()'. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31net: sky2: initialize return of gm_phy_readTom Rix
[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ] clang static analysis flags this garbage return drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~ static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; } __gm_phy_read can return without setting v. So handle similar to skge.c's gm_phy_read, initialize v. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31drivers/net/wan/lapbether: Fixed the value of hard_header_lenXie He
[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ] When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header. So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device". This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets. Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22bnxt_en: fix NULL dereference in case SR-IOV configuration failsDavide Caratti
commit c8b1d7436045d3599bae56aef1682813ecccaad7 upstream. we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"Greg Kroah-Hartman
This reverts commit 90ecba9f1041f436ed2b35ba7a970c7cc5d0df23 which is commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22smsc95xx: avoid memory leak in smsc95xx_bindAndre Edich
[ Upstream commit 3ed58f96a70b85ef646d5427258f677f1395b62f ] In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee69242 ("smsc95xx: add wol support for more frame types") Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22smsc95xx: check return value of smsc95xx_resetAndre Edich
[ Upstream commit 7c8b1e855f94f88a0c569be6309fc8d5c8844cd1 ] The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802bdae2 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22net: cxgb4: fix return error value in t4_prep_fwLi Heng
[ Upstream commit 8a259e6b73ad8181b0b2ef338b35043433db1075 ] t4_prep_fw goto bye tag with positive return value when something bad happened and which can not free resource in adap_init0. so fix it to return negative value. Fixes: 16e47624e76b ("cxgb4: Add new scheme to update T4/T5 firmware") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-29net: alx: fix race condition in alx_removeZekun Shen
[ Upstream commit e89df5c4322c1bf495f62d74745895b5fd2a4393 ] There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-29tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezesDavid Christensen
[ Upstream commit 3a2656a211caf35e56afc9425e6e518fa52f7fbc ] The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29net: usb: ax88179_178a: fix packet alignment paddingJeremy Kerr
[ Upstream commit e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 ] Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29e1000e: Do not wake up the system via WOL if device wakeup is disabledChen Yu
[ Upstream commit 6bf6be1127f7e6d4bf39f84d56854e944d045d74 ] Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-29yam: fix possible memory leak in yam_init_driverWang Hai
[ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ] If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20igb: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng
commit 165ae7a8feb53dc47fb041357e4b253bfc927cf9 upstream. igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable <stable@vger.kernel.org> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43_legacy: Fix connection problem with WPA3Larry Finger
commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43: Fix connection problem with WPA3Larry Finger
commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43legacy: Fix case where channel status is corruptedLarry Finger
commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream. This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested by: F. Erhard <erhard_f@mailbox.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 16:43:35 +0000