| Age | Commit message (Collapse) | Author |
|---|
|
Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.
|
|
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
|
|
The NVDIMM region could be available before the virtio_device_ready()
that is called by virtio_dev_probe(). This means the driver tries to
use device before DRIVER_OK which violates the spec, fixing this by
set device ready before the nvdimm_pmem_region_create().
Note that this means the virtio_pmem_host_ack() could be triggered
before the creation of the nd region, this is safe since the pmem_lock
has been initialized and whether or not any available buffer is added
before is validated by virtio_pmem_host_ack().
Fixes 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver")
Acked-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220628083430.61856-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We used to initialize the provider_data manually after
nvdimm_pemm_region_create(). This seems to be racy if the flush is
issued before the initialization of provider_data[1]. Fixing this by
initializing the provider_data through nd_region_desc to make sure the
provider_data is ready after the pmem is created.
[1]:
[ 80.152281] nd_pmem namespace0.0: unable to guarantee persistence of writes
[ 92.393956] BUG: kernel NULL pointer dereference, address: 0000000000000318
[ 92.394551] #PF: supervisor read access in kernel mode
[ 92.394955] #PF: error_code(0x0000) - not-present page
[ 92.395365] PGD 0 P4D 0
[ 92.395566] Oops: 0000 [#1] PREEMPT SMP PTI
[ 92.395867] CPU: 2 PID: 506 Comm: mkfs.ext4 Not tainted 5.19.0-rc1+ #453
[ 92.396365] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 92.397178] RIP: 0010:virtio_pmem_flush+0x2f/0x1f0
[ 92.397521] Code: 55 41 54 55 53 48 81 ec a0 00 00 00 65 48 8b 04
25 28 00 00 00 48 89 84 24 98 00 00 00 31 c0 48 8b 87 78 03 00 00 48
89 04 24 <48> 8b 98 18 03 00 00 e8 85 bf 6b 00 ba 58 00 00 00 be c0 0c
00 00
[ 92.398982] RSP: 0018:ffff9a7380aefc88 EFLAGS: 00010246
[ 92.399349] RAX: 0000000000000000 RBX: ffff8e77c3f86f00 RCX: 0000000000000000
[ 92.399833] RDX: ffffffffad4ea720 RSI: ffff8e77c41e39c0 RDI: ffff8e77c41c5c00
[ 92.400388] RBP: ffff8e77c41e39c0 R08: ffff8e77c19f0600 R09: 0000000000000000
[ 92.400874] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8e77c0814e28
[ 92.401364] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8e77c41e39c0
[ 92.401849] FS: 00007f3cd75b2780(0000) GS:ffff8e7937d00000(0000)
knlGS:0000000000000000
[ 92.402423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 92.402821] CR2: 0000000000000318 CR3: 0000000103c80002 CR4: 0000000000370ee0
[ 92.403307] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 92.403793] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 92.404278] Call Trace:
[ 92.404481] <TASK>
[ 92.404654] ? mempool_alloc+0x5d/0x160
[ 92.404939] ? terminate_walk+0x5f/0xf0
[ 92.405226] ? bio_alloc_bioset+0xbb/0x3f0
[ 92.405525] async_pmem_flush+0x17/0x80
[ 92.405806] nvdimm_flush+0x11/0x30
[ 92.406067] pmem_submit_bio+0x1e9/0x200
[ 92.406354] __submit_bio+0x80/0x120
[ 92.406621] submit_bio_noacct_nocheck+0xdc/0x2a0
[ 92.406958] submit_bio_wait+0x4e/0x80
[ 92.407234] blkdev_issue_flush+0x31/0x50
[ 92.407526] ? punt_bios_to_rescuer+0x230/0x230
[ 92.407852] blkdev_fsync+0x1e/0x30
[ 92.408112] do_fsync+0x33/0x70
[ 92.408354] __x64_sys_fsync+0xb/0x10
[ 92.408625] do_syscall_64+0x43/0x90
[ 92.408895] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 92.409257] RIP: 0033:0x7f3cd76c6c44
Fixes 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver")
Acked-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220628083430.61856-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
|
|
The LIBNVDIMM subsystem is a platform agnostic representation of system
NVDIMM / persistent memory resources. To date, the CXL subsystem's
interaction with LIBNVDIMM has been to register an nvdimm-bridge device
and cxl_nvdimm objects to proxy CXL capabilities into existing LIBNVDIMM
subsystem mechanics.
With regions the approach is the same. Create a new cxl_pmem_region
object to proxy CXL region details into a LIBNVDIMM definition. With
this enabling LIBNVDIMM can partition CXL persistent memory regions with
legacy namespace labels. A follow-on patch will add CXL region label and
CXL namespace label support to persist region configurations across
driver reload / system-reset events.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784340111.1758207.3036498385188290968.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When memory-failure occurs, we call this function which is implemented by
each kind of devices. For the fsdax case, pmem device driver implements
it. Pmem device driver will find out the filesystem in which the
corrupted page located in.
With dax_holder notify support, we are able to notify the memory failure
from pmem driver to upper layers. If there is something not support in
the notify routine, memory_failure will fall back to the generic hanlder.
Link: https://lkml.kernel.org/r/20220603053738.1218681-4-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kernel build bot reported:
namespace_devs.c:1991:10: warning: Local variable 'uuid' shadows outer variable [shadowVariable]
Refactor create_namespace_pmem() by dropping a nested version of
the same variable.
Fixes: d1c6e08e7503 ("libnvdimm/labels: Add uuid helpers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220607164937.33967-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Improve static type checking by using the enum req_op type where
appropriate.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-20-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All .rw_page() callers pass an enum req_op value as last argument. Make
this explicit by changing the type of the last argument into enum req_op.
See also commit 3f289dcb4b26 ("block: make bdev_ops->rw_page() take a
REQ_OP instead of bool").
Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Kernel test robot detected name collision when compiled on 'um'
architecture. Rename "to_phys()" to "pmem_to_phys()".
>> drivers/nvdimm/pmem.c:48:20: error: conflicting types for 'to_phys'; have 'phys_addr_t(struct pmem_device *, phys_addr_t)' {aka 'long long unsigned int(struct pmem_device *, long long unsigned int)'}
48 | static phys_addr_t to_phys(struct pmem_device *pmem, phys_addr_t offset)
| ^~~~~~~
In file included from arch/um/include/asm/page.h:98,
from arch/um/include/asm/thread_info.h:15,
from include/linux/thread_info.h:60,
from include/asm-generic/preempt.h:5,
from ./arch/um/include/generated/asm/preempt.h:1,
arch/um/include/shared/mem.h:12:29: note: previous definition of 'to_phys' with type 'long unsigned int(void *)'
12 | static inline unsigned long to_phys(void *virt)
| ^~~~~~~
vim +48 drivers/nvdimm/pmem.c
47
> 48 static phys_addr_t to_phys(struct pmem_device *pmem, phys_addr_t offset)
49 {
50 return pmem->phys_addr + offset;
51 }
52
Fixes: 9409c9b6709e (pmem: refactor pmem_clear_poison())
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220630182802.3250449-1-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvdimm_clear_badblocks_region() validates badblock clearing requests
against the span of the region, however it compares the inclusive
badblock request range to the exclusive region range. Fix up the
off-by-one error.
Fixes: 23f498448362 ("libnvdimm: rework region badblocks clearing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ye <chris.ye@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/165404219489.2445897.9792886413715690399.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
|
|
The recovery write thread started out as a normal pwrite thread and
when the filesystem was told about potential media error in the
range, filesystem turns the normal pwrite to a dax_recovery_write.
The recovery write consists of clearing media poison, clearing page
HWPoison bit, reenable page-wide read-write permission, flush the
caches and finally write. A competing pread thread will be held
off during the recovery process since data read back might not be
valid, and this is achieved by clearing the badblock records after
the recovery write is complete. Competing recovery write threads
are already serialized by writer lock held by dax_iomap_rw().
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/165247997655.53156.8381418704988035976.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Refactor the pmem_clear_poison() function such that the common
shared code between the typical write path and the recovery write
path is factored out.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-7-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Introduce dax_recovery_write() operation. The function is used to
recover a dax range that contains poison. Typical use case is when
a user process receives a SIGBUS with si_code BUS_MCEERR_AR
indicating poison(s) in a dax range, in response, the user process
issues a pwrite() to the page-aligned dax range, thus clears the
poison and puts valid data in the range.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The set_memory_uc() approach doesn't work well in all cases.
As Dan pointed out when "The VMM unmapped the bad page from
guest physical space and passed the machine check to the guest."
"The guest gets virtual #MC on an access to that page. When
the guest tries to do set_memory_uc() and instructs cpa_flush()
to do clean caches that results in taking another fault / exception
perhaps because the VMM unmapped the page from the guest."
Since the driver has special knowledge to handle NP or UC,
mark the poisoned page with NP and let driver handle it when
it comes down to repair.
Please refer to discussions here for more details.
https://lore.kernel.org/all/CAPcyv4hrXPb1tASBZUg-GgdVs0OOFKXMXLiHmktg_kFi7YBMyQ@mail.gmail.com/
Now since poisoned page is marked as not-present, in order to
avoid writing to a not-present page and trigger kernel Oops,
also fix pmem_do_write().
Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/165272615484.103830.2563950688772226611.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
It is not clear why the original implementation of overwrite support
required the dimm driver to be active before overwrite could proceed. In
fact that can lead to cases where the kernel retains an invalid cached
copy of the labels from before the overwrite. Unfortunately the kernel
has not only allowed that case, but enforced it.
Going forward, allow for overwrite to happen while the label area is
offline, and follow-on with updates to 'ndctl sanitize-dimm --overwrite'
to trigger the label area invalidation by default.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Krzysztof Kensicki <krzysztof.kensicki@intel.com>
Fixes: 7d988097c546 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Lockdep reports the following deadlock scenarios for CXL root device
power-management, device_prepare(), operations, and device_shutdown()
operations for 'nd_region' devices:
Chain exists of:
&nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(system_transition_mutex);
lock(&nvdimm_bus->reconfig_mutex);
lock(system_transition_mutex);
lock(&nvdimm_region_key);
Chain exists of:
&cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&cxl_root_key);
lock(acpi_scan_lock);
lock(&cxl_root_key);
lock(&cxl_nvdimm_bridge_key);
These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec()
which walks the entire system device topology taking device_lock() along
the way. The nvdimm_bus_lock() is protecting against unregistration,
multiple simultaneous ops callers, and preventing activate_show() from
racing activate_store(). For the first 2, the lock is redundant.
Unregistration already flushes all ops users, and sysfs already prevents
multiple threads to be active in an ops handler at the same time. For
the last userspace should already be waiting for its last
activate_store() to complete, and does not need activate_show() to flush
the write side, so this lock usage can be deleted in these attributes.
Fixes: 48001ea50d17 ("PM, libnvdimm: Add runtime firmware activation support")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165074883800.4116052.10737040861825806582.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that all NVDIMM subsystem locking is validated with custom lock
classes, there is no need for the custom usage of the lockdep_mutex.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165055521979.3745911.10751769706032029999.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In response to an attempt to expand dev->lockdep_mutex for device_lock()
validation [1], Peter points out [2] that the lockdep API already has
the ability to assign a dedicated lock class per subsystem device-type.
Use lockdep_set_class() to override the default device_lock()
'__lockdep_no_validate__' class for each NVDIMM subsystem device-type. This
enables lockdep to detect deadlocks and recursive locking within the
device-driver core and the subsystem.
Link: https://lore.kernel.org/r/164982968798.684294.15817853329823976469.stgit@dwillia2-desk3.amr.corp.intel.com [1]
Link: https://lore.kernel.org/r/Ylf0dewci8myLvoW@hirez.programming.kicks-ass.net [2]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165055520896.3745911.8021255583475547548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"This development cycle extends the subsystem to discover CXL resources
throughout a CXL/PCIe switch topology and respond to hot add/remove
events anywhere in that topology.
This is more foundational infrastructure in preparation for dynamic
memory region provisioning support. Recall that CXL memory regions, as
the new "Theory of Operation" section of
Documentation/driver-api/cxl/memory-devices.rst describes, bring
storage volume striping semantics to memory.
The hot add/remove behavior is validated with extensions to the
cxl_test unit test environment and this test in the cxl-cli test
suite:
https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh
Summary:
- Add a driver for 'struct cxl_memdev' objects responsible for
CXL.mem operation as distinct from 'cxl_pci' mailbox operations.
Its primary responsibility is enumerating an endpoint 'struct
cxl_port' and all the 'struct cxl_port' instances between an
endpoint and the CXL platform root.
- Add a driver for 'struct cxl_port' objects responsible for
enumerating and operating all Host-managed Device Memory (HDM)
decoder resources between the platform-level CXL memory
description, all intervening host bridges / switches, and the HDM
resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors
to HDM decoder operation like ready-polling, and legacy CXL 1.1
DVSEC based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL
subsystem objects similar to what exists for LIBNVDIMM. Include a
compile-time switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports"
* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
cxl/core/port: Fix NULL but dereferenced coccicheck error
cxl/port: Hold port reference until decoder release
cxl/port: Fix endpoint refcount leak
cxl/core: Fix cxl_device_lock() class detection
cxl/core/port: Fix unregister_port() lock assertion
cxl/regs: Fix size of CXL Capability Header Register
cxl/core/port: Handle invalid decoders
cxl/core/port: Fix / relax decoder target enumeration
tools/testing/cxl: Add a physical_node link
tools/testing/cxl: Enumerate mock decoders
tools/testing/cxl: Mock one level of switches
tools/testing/cxl: Fix root port to host bridge assignment
tools/testing/cxl: Mock dvsec_ranges()
cxl/core/port: Add endpoint decoders
cxl/core: Move target_list out of base decoder attributes
cxl/mem: Add the cxl_mem driver
cxl/core/port: Add switch port enumeration
cxl/memdev: Add numa_node attribute
cxl/pci: Emit device serial number
cxl/pci: Implement wait for media active
...
|
|
The following build failure occurs when CONFIG_PERF_EVENTS is not set
as generic pmu functions are not visible in that scenario.
|-- s390-randconfig-r044-20220313
| |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context
| |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register
| `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister
Similar build failure in nds32 architecture:
nd_perf.c:(.text+0x21e): undefined reference to `perf_pmu_migrate_context'
nd_perf.c:(.text+0x434): undefined reference to `perf_pmu_register'
nd_perf.c:(.text+0x57c): undefined reference to `perf_pmu_unregister'
Fix this issue by adding check for CONFIG_PERF_EVENTS config option
and disabling the nvdimm perf interface incase this config is not set.
Also remove function declaration of perf_pmu_migrate_context,
perf_pmu_register, perf_pmu_unregister functions from nd.h as these are
common pmu functions which are part of perf_event.h and since we
are disabling nvdimm perf interface incase CONFIG_PERF_EVENTS option
is not set, we not need to declare them in nd.h
Also move the platform_device header file addition part from nd.h to
nd_perf.c and add stub functions for register_nvdimm_pmu and
unregister_nvdimm_pmu functions to handle CONFIG_PERF_EVENTS=n
case.
Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats") (Commit id based on libnvdimm-for-next tree)
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/all/62317124.YBQFU33+s%2FwdvWGj%25lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220323164550.109768-1-kjain@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
Now that the nd_namespace_blk infrastructure is removed, delete all the
region machinery to coordinate provisioning aliased capacity between
PMEM and BLK.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688418803.2879318.1302315202397235855.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that none of the configuration paths consider BLK namespaces, delete
the BLK namespace data and supporting code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688417727.2879318.11691110761800109662.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Given is_namespace_blk() is never true outside of the NVDIMM unit tests
delete the support from namespace device management.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688417214.2879318.4698377272678028573.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Block Aperture Window support was an attempt to layer an error model
over PMEM for platforms that did not support machine-check-recovery.
However, it was abandoned before it ever shipped, and only ever existed
in the ACPI specification. Meanwhile Linux has carried a large pile of
dead code for non-shipping infrastructure. For years it has been off to
the side out of the way, but now CXL and recent directions with DAX
support have the potential to collide with this code.
In preparation for adding discontiguous namespace support, a
pre-requisite for the nvdimm subsystem to replace device-mapper for
striping + concatenation use cases, delete BLK aperture support.
On the obscure chance that some hardware vendor shipped support for this
mode, note that the driver will still keep BLK space reserved in the
label area. So an end user in this case would still have the opportunity
to report the regression to get BLK-mode support restored without
risking the data they have on that device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416668.2879318.16903178375774275120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A common interface is added to get performance stats reporting
support for nvdimm devices. Added interface defines supported
event list, config fields for the event attributes and their
corresponding bit values which are exported via sysfs.
Interface also added support for pmu register/unregister functions,
cpu hotplug feature along with macros for handling events addition
via sysfs. It adds attribute groups for format, cpumask and events
to the pmu structure.
User could use the standard perf tool to access perf events exposed
via nvdimm pmu.
[Declare pmu functions in nd.h file to resolve implicit-function-declaration
warning and make hotplug function static as reported by kernel test robot]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/all/202202241242.zqzGkguy-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Madhavan Srinivasan <maddy@in.ibm.com>
Link: https://lore.kernel.org/r/20220225143024.47947-3-kjain@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
When CONFIG_PROVE_LOCKING is enabled the 'struct device' definition gets
an additional mutex that is not clobbered by
lockdep_set_novalidate_class() like the typical device_lock(). This
allows for local annotation of subsystem locks with mutex_lock_nested()
per the subsystem's object/lock hierarchy. For CXL, this primarily needs
the ability to lock ports by depth and child objects of ports by their
parent parent-port lock.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164365853422.99383.1052399160445197427.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
|
|
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These methods indirect the actual DAX read/write path. In the end pmem
uses magic flush and mc safe variants and fuse and dcssblk use plain ones
while device mapper picks redirects to the underlying device.
Add set_dax_nocache() and set_dax_nomc() APIs to control which copy
routines are used to remove indirect call from the read/write fast path
as well as a lot of boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs]
Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and
just let the drivers call set_dax_synchronous directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
These two wrappers are never used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211215084508.435401-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CONFIG_DAX_DRIVER only selects CONFIG_DAX now, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm update from Dan Williams:
"A single cleanup that precedes some deeper PMEM/DAX reworks that did
not settle in time for v5.16:
- Continue the cleanup of the dax api in preparation for a dax-device
block-device divorce"
* tag 'libnvdimm-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: move dax_attribute_group from dax to pmem
|
